Adds filamentUsed and longestPrint stats to PrintCounter

This commit is contained in:
João Brázio 2016-07-14 02:18:59 +01:00
parent 7202383695
commit 2f26bc2153
4 changed files with 87 additions and 20 deletions

View File

@ -2564,8 +2564,14 @@ void gcode_get_destination() {
else
destination[i] = current_position[i];
}
if (code_seen('F') && code_value_linear_units() > 0.0)
feedrate = code_value_linear_units();
#if ENABLED(PRINTCOUNTER)
if(!DEBUGGING(DRYRUN))
print_job_timer.incFilamentUsed(destination[E_AXIS] - current_position[E_AXIS]);
#endif
}
void unknown_command_error() {

View File

@ -119,6 +119,7 @@
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_WAIT "wait"
#define MSG_STATS "Stats: "
#define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "

View File

@ -41,13 +41,25 @@ bool PrintCounter::isLoaded() {
return this->loaded;
}
void PrintCounter::incFilamentUsed(double const &amount) {
#if ENABLED(DEBUG_PRINTCOUNTER)
PrintCounter::debug(PSTR("incFilamentUsed"));
#endif
// Refuses to update data if object is not loaded
if (!this->isLoaded()) return;
this->data.filamentUsed += amount; // mm
}
void PrintCounter::initStats() {
#if ENABLED(DEBUG_PRINTCOUNTER)
PrintCounter::debug(PSTR("initStats"));
#endif
this->loaded = true;
this->data = { 0, 0, 0, 0 };
this->data = { 0, 0, 0, 0, 0.0 };
this->saveStats();
eeprom_write_byte((uint8_t *) this->address, 0x16);
@ -60,7 +72,8 @@ void PrintCounter::loadStats() {
// Checks if the EEPROM block is initialized
if (eeprom_read_byte((uint8_t *) this->address) != 0x16) this->initStats();
else eeprom_read_block(&this->data, (void *)(this->address + sizeof(uint8_t)), sizeof(printStatistics));
else eeprom_read_block(&this->data,
(void *)(this->address + sizeof(uint8_t)), sizeof(printStatistics));
this->loaded = true;
}
@ -70,31 +83,40 @@ void PrintCounter::saveStats() {
PrintCounter::debug(PSTR("saveStats"));
#endif
// Refuses to save data is object is not loaded
// Refuses to save data if object is not loaded
if (!this->isLoaded()) return;
// Saves the struct to EEPROM
eeprom_update_block(&this->data, (void *)(this->address + sizeof(uint8_t)), sizeof(printStatistics));
eeprom_update_block(&this->data,
(void *)(this->address + sizeof(uint8_t)), sizeof(printStatistics));
}
void PrintCounter::showStats() {
SERIAL_ECHOPGM("Print statistics: Total: ");
SERIAL_PROTOCOLPGM(MSG_STATS);
SERIAL_ECHOPGM("Prints: ");
SERIAL_ECHO(this->data.totalPrints);
SERIAL_ECHOPGM(", Finished: ");
SERIAL_ECHO(this->data.finishedPrints);
SERIAL_ECHOPGM(", Failed: ");
SERIAL_ECHOPGM(", Failed: "); // Note: Removes 1 from failures with an active counter
SERIAL_ECHO(this->data.totalPrints - this->data.finishedPrints
- ((this->isRunning() || this->isPaused()) ? 1 : 0)); // Removes 1 from failures with an active counter
- ((this->isRunning() || this->isPaused()) ? 1 : 0));
millis_t t = this->data.printTime / 60; // minutes from seconds
SERIAL_ECHOPGM(", Total print time: ");
SERIAL_ECHO(t / 60); // hours
SERIAL_EOL;
SERIAL_PROTOCOLPGM(MSG_STATS);
uint32_t t = this->data.printTime / 60;
SERIAL_ECHOPGM("Total time: ");
SERIAL_ECHO(t / 60 / 24);
SERIAL_ECHOPGM("d ");
SERIAL_ECHO((t / 60) % 24);
SERIAL_ECHOPGM("h ");
SERIAL_ECHO(t % 60); // minutes
SERIAL_ECHO(t % 60);
SERIAL_ECHOPGM("min");
#if ENABLED(DEBUG_PRINTCOUNTER)
@ -103,34 +125,58 @@ void PrintCounter::showStats() {
SERIAL_ECHOPGM(")");
#endif
// @todo longestPrint missing implementation
uint32_t l = this->data.longestPrint / 60;
SERIAL_ECHOPGM(", Longest job: ");
SERIAL_ECHO(l / 60 / 24);
SERIAL_ECHOPGM("d ");
SERIAL_ECHO((l / 60) % 24);
SERIAL_ECHOPGM("h ");
SERIAL_ECHO(l % 60);
SERIAL_ECHOPGM("min");
#if ENABLED(DEBUG_PRINTCOUNTER)
SERIAL_ECHOPGM(" (");
SERIAL_ECHO(this->data.longestPrint);
SERIAL_ECHOPGM(")");
#endif
SERIAL_EOL;
SERIAL_PROTOCOLPGM(MSG_STATS);
SERIAL_ECHOPGM("Filament used: ");
SERIAL_ECHO(this->data.filamentUsed / 1000);
SERIAL_ECHOPGM("m");
SERIAL_EOL;
}
void PrintCounter::tick() {
if (!this->isRunning()) return;
static millis_t update_before = millis(),
eeprom_before = millis();
static uint32_t update_last = millis(),
eeprom_last = millis();
millis_t now = millis();
// Trying to get the amount of calculations down to the bare min
const static uint16_t i = this->updateInterval * 1000;
if (now - update_before >= i) {
if (now - update_last >= i) {
#if ENABLED(DEBUG_PRINTCOUNTER)
PrintCounter::debug(PSTR("tick"));
#endif
this->data.printTime += this->deltaDuration();
update_before = now;
update_last = now;
}
// Trying to get the amount of calculations down to the bare min
const static millis_t j = this->saveInterval * 1000;
if (now - eeprom_before >= j) {
eeprom_before = now;
if (now - eeprom_last >= j) {
eeprom_last = now;
this->saveStats();
}
}
@ -162,6 +208,10 @@ bool PrintCounter::stop() {
if (super::stop()) {
this->data.finishedPrints++;
this->data.printTime += this->deltaDuration();
if (this->duration() > this->data.longestPrint)
this->data.longestPrint = this->duration();
this->saveStats();
return true;
}

View File

@ -24,6 +24,7 @@
#define PRINTCOUNTER_H
#include "macros.h"
#include "language.h"
#include "stopwatch.h"
#include <avr/eeprom.h>
@ -35,8 +36,9 @@ struct printStatistics { // 13 bytes
//const uint8_t magic; // Magic header, it will always be 0x16
uint16_t totalPrints; // Number of prints
uint16_t finishedPrints; // Number of complete prints
millis_t printTime; // Total printing time
millis_t longestPrint; // Longest print job - not in use
uint32_t printTime; // Accumulated printing time
uint32_t longestPrint; // Longest successfull print job
double filamentUsed; // Accumulated filament consumed in mm
};
class PrintCounter: public Stopwatch {
@ -105,6 +107,14 @@ class PrintCounter: public Stopwatch {
*/
bool isLoaded();
/**
* @brief Increments the total filament used
* @details The total filament used counter will be incremented by "amount".
*
* @param amount The amount of filament used in mm
*/
void incFilamentUsed(double const &amount);
/**
* @brief Resets the Print Statistics
* @details Resets the statistics to zero and saves them to EEPROM creating