Add Z_AFTER_DEACTIVATE to account for gravity (#18906)

This commit is contained in:
swissnorp 2020-08-04 07:31:45 +02:00 committed by Scott Lahteine
parent e82e94be5b
commit 301569bee6
5 changed files with 33 additions and 25 deletions

View File

@ -1076,18 +1076,18 @@
#define Z_ENABLE_ON 0 #define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 // For all extruders #define E_ENABLE_ON 0 // For all extruders
// Disables axis stepper immediately when it's not being used. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false #define DISABLE_X false
#define DISABLE_Y false #define DISABLE_Y false
#define DISABLE_Z false #define DISABLE_Z false
// Warn on display about possibly reduced accuracy // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // For all extruders #define DISABLE_E false // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section machine // @section machine

View File

@ -809,22 +809,28 @@
#define INVERT_Z_STEP_PIN false #define INVERT_Z_STEP_PIN false
#define INVERT_E_STEP_PIN false #define INVERT_E_STEP_PIN false
// Default stepper release if idle. Set to 0 to deactivate. /**
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. * Idle Stepper Shutdown
// Time can be set by M18 and M84. * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_E true #define DISABLE_INACTIVE_E true
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate // If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 //#define Z_AFTER_DEACTIVATE Z_HOME_POS
//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
// Minimum time that a segment needs to take if the buffer is emptied // Minimum time that a segment needs to take as the buffer gets emptied
#define DEFAULT_MINSEGMENTTIME 20000 // (µs) #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B.
// Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.
#define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T.
// Slow down the machine if the lookahead buffer is (by default) half full. // Slow down the machine if the lookahead buffer is (by default) half full.
// Increase the slowdown divisor for larger buffer sizes. // Increase the slowdown divisor for larger buffer sizes.

View File

@ -819,16 +819,9 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
} }
if (countdown == 0 && (forceUpdate || position_changed() if (countdown == 0 && (forceUpdate || position_changed()
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) || TERN(DISABLE_REDUCED_ACCURACY_WARNING, 0, blink_changed())
|| blink_changed() ))
#endif draw_position(current_position, TERN(DISABLE_REDUCED_ACCURACY_WARNING, 0, all_axes_known()));
)) {
draw_position(current_position, true
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
&& all_axes_known()
#endif
);
}
#endif #endif
} }

View File

@ -1281,7 +1281,7 @@ void Planner::recalculate() {
void Planner::check_axes_activity() { void Planner::check_axes_activity() {
#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E) #if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E)
xyze_bool_t axis_active = { false }; xyze_bool_t axis_active = { true, true, true, true };
#endif #endif
#if HAS_FAN #if HAS_FAN
@ -1316,7 +1316,10 @@ void Planner::check_axes_activity() {
#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E) #if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E)
for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) {
block_t *block = &block_buffer[b]; block_t *block = &block_buffer[b];
LOOP_XYZE(i) if (block->steps[i]) axis_active[i] = true; if (ENABLED(DISABLE_X) && block->steps[X_AXIS]) axis_active[X_AXIS] = true;
if (ENABLED(DISABLE_Y) && block->steps[Y_AXIS]) axis_active[Y_AXIS] = true;
if (ENABLED(DISABLE_Z) && block->steps[Z_AXIS]) axis_active[Z_AXIS] = true;
if (ENABLED(DISABLE_E) && block->steps[E_AXIS]) axis_active[E_AXIS] = true;
} }
#endif #endif
} }

View File

@ -848,7 +848,13 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); CBI(axis_known_position, Y_AXIS); }while(0) #define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); CBI(axis_known_position, Y_AXIS); }while(0)
#define ENABLE_AXIS_Z() do{ ENABLE_STEPPER_Z(); ENABLE_STEPPER_Z2(); ENABLE_STEPPER_Z3(); ENABLE_STEPPER_Z4(); }while(0) #define ENABLE_AXIS_Z() do{ ENABLE_STEPPER_Z(); ENABLE_STEPPER_Z2(); ENABLE_STEPPER_Z3(); ENABLE_STEPPER_Z4(); }while(0)
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); CBI(axis_known_position, Z_AXIS); }while(0)
#ifdef Z_AFTER_DEACTIVATE
#define Z_RESET() do{ current_position.z = Z_AFTER_DEACTIVATE; planner.sync_plan_position(); }while(0)
#else
#define Z_RESET()
#endif
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); CBI(axis_known_position, Z_AXIS); Z_RESET(); }while(0)
// //
// Extruder steppers enable / disable macros // Extruder steppers enable / disable macros