Allow bypass for cold E movement (#19606)

This commit is contained in:
Cory Ory 2020-10-05 01:51:21 +01:00 committed by Scott Lahteine
parent cb8c99c4f8
commit 31238de937
3 changed files with 61 additions and 43 deletions

View File

@ -170,11 +170,6 @@ void _goto_manual_move(const float scale) {
void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int8_t eindex=-1) {
_manual_move_func_ptr = func;
#if ENABLED(PREVENT_COLD_EXTRUSION)
const bool too_cold = axis == E_AXIS && thermalManager.tooColdToExtrude(eindex >= 0 ? eindex : active_extruder);
#else
constexpr bool too_cold = false;
#endif
START_MENU();
if (LCD_HEIGHT >= 4) {
switch (axis) {
@ -187,35 +182,57 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
break;
}
}
if (too_cold)
BACK_ITEM(MSG_HOTEND_TOO_COLD);
else {
BACK_ITEM(MSG_MOVE_AXIS);
SUBMENU(MSG_MOVE_10MM, []{ _goto_manual_move(10); });
SUBMENU(MSG_MOVE_1MM, []{ _goto_manual_move( 1); });
SUBMENU(MSG_MOVE_01MM, []{ _goto_manual_move( 0.1f); });
if (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) {
// Determine digits needed right of decimal
constexpr uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
PGM_P const label = GET_TEXT(MSG_MOVE_Z_DIST);
char tmp[strlen_P(label) + 10 + 1], numstr[10];
sprintf_P(tmp, label, dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr));
#if DISABLED(HAS_GRAPHICAL_TFT)
extern const char NUL_STR[];
SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
MENU_ITEM_ADDON_START(0 + ENABLED(HAS_MARLINUI_HD44780));
lcd_put_u8str(tmp);
MENU_ITEM_ADDON_END();
#else
SUBMENU_P(tmp, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
#endif
}
BACK_ITEM(MSG_MOVE_AXIS);
SUBMENU(MSG_MOVE_10MM, []{ _goto_manual_move(10); });
SUBMENU(MSG_MOVE_1MM, []{ _goto_manual_move( 1); });
SUBMENU(MSG_MOVE_01MM, []{ _goto_manual_move( 0.1f); });
if (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) {
// Determine digits needed right of decimal
constexpr uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
PGM_P const label = GET_TEXT(MSG_MOVE_Z_DIST);
char tmp[strlen_P(label) + 10 + 1], numstr[10];
sprintf_P(tmp, label, dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr));
#if DISABLED(HAS_GRAPHICAL_TFT)
extern const char NUL_STR[];
SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
MENU_ITEM_ADDON_START(0 + ENABLED(HAS_MARLINUI_HD44780));
lcd_put_u8str(tmp);
MENU_ITEM_ADDON_END();
#else
SUBMENU_P(tmp, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
#endif
}
END_MENU();
}
#if E_MANUAL
inline void _goto_menu_move_distance_e() {
ui.goto_screen([]{ _menu_move_distance(E_AXIS, []{ lcd_move_e(); }, -1); });
}
inline void _menu_move_distance_e_maybe() {
#if ENABLED(PREVENT_COLD_EXTRUSION)
const bool too_cold = thermalManager.tooColdToExtrude(active_extruder);
if (too_cold) {
ui.goto_screen([]{
MenuItem_confirm::select_screen(
GET_TEXT(MSG_BUTTON_PROCEED), GET_TEXT(MSG_BACK),
_goto_menu_move_distance_e, ui.goto_previous_screen,
GET_TEXT(MSG_HOTEND_TOO_COLD), (const char *)nullptr, PSTR("!")
);
});
return;
}
#endif
_goto_menu_move_distance_e();
}
#endif // E_MANUAL
void menu_move() {
START_MENU();
BACK_ITEM(MSG_MOTION);
@ -278,7 +295,7 @@ void menu_move() {
#if E_MANUAL
// The current extruder
SUBMENU(MSG_MOVE_E, []{ _menu_move_distance(E_AXIS, []{ lcd_move_e(); }, -1); });
SUBMENU(MSG_MOVE_E, []{ _menu_move_distance_e_maybe(); });
#define SUBMENU_MOVE_E(N) SUBMENU_N(N, MSG_MOVE_EN, []{ _menu_move_distance(E_AXIS, []{ lcd_move_e(MenuItemBase::itemIndex); }, MenuItemBase::itemIndex); });

View File

@ -52,16 +52,8 @@ exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBR
# Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic
opt_set LCD_LANGUAGE cz
opt_set X_DRIVER_TYPE L6470
opt_set Y_DRIVER_TYPE L6470
opt_set Z_DRIVER_TYPE L6470
opt_add L6470_CHAIN_SCK_PIN 53
opt_add L6470_CHAIN_MISO_PIN 49
opt_add L6470_CHAIN_MOSI_PIN 40
opt_add L6470_CHAIN_SS_PIN 42
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
exec_test $1 $2 "DELTA | L6470 | RRD LCD | ABL Bilinear | BLTOUCH"
exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH"
# clean up
restore_configs

View File

@ -256,13 +256,22 @@ exec_test $1 $2 "Full-featured CR-10S config"
#exec_test $1 $2 "Stuff"
#
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
# Delta Config (generic) + UBL + ALLEN_KEY + EEPROM_SETTINGS + OLED_PANEL_TINYBOY2
#
use_example_configs delta/generic
opt_enable RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS EEPROM_CHITCHAT \
Z_PROBE_ALLEN_KEY AUTO_BED_LEVELING_UBL \
OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY DELTA_CALIBRATION_MENU
opt_set LCD_LANGUAGE ko_KR
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT \
OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
exec_test $1 $2 "RAMPS | DELTA | OLED_PANEL_TINYBOY2 | UBL | Allen Key | EEPROM"
opt_set X_DRIVER_TYPE L6470
opt_set Y_DRIVER_TYPE L6470
opt_set Z_DRIVER_TYPE L6470
opt_add L6470_CHAIN_SCK_PIN 53
opt_add L6470_CHAIN_MISO_PIN 49
opt_add L6470_CHAIN_MOSI_PIN 40
opt_add L6470_CHAIN_SS_PIN 42
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..."
#
# Delta Config (FLSUN AC because it's complex)