diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 5cc22a7bbe..983b8b6e75 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 25ccd7993e..b0d2ae83c4 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index d06a29e84d..a522b0d5e0 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index fc354ed28f..a17c2ca914 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index d8b21565c9..427689bb3b 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -1366,13 +1366,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 98f36de15b..b6202e241d 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 06269f9efb..beadaf7893 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 98f36de15b..b6202e241d 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index d6f17a8e0e..cd736f03f2 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 0ece5f76af..ace89cfdbf 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1368,13 +1368,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index fdcbd485dd..aafc2475e5 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index b7db7b8b20..fdbd8d091a 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 491aa29940..d3fdccff90 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 //#define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 508b074404..e75ec2b37c 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1337,13 +1337,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index aa719934d5..36387ad02b 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1362,13 +1362,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index e8c5330c61..30c510a32a 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index bd3317ad7d..7ec38bf2e6 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1366,13 +1366,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index eb5e9ecdd4..fa61862fa2 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1373,13 +1373,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index d0a3d8a60a..3ba10ff69b 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 64a3f125ec..14c87bd821 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 3c43697137..4807fddddb 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1354,13 +1354,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 132d2c09be..12df45c5f5 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 5695802cf5..aaa8e47649 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 13692f5364..87bb07cff3 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 02b4b43c78..6fa3e6eaa1 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1366,13 +1366,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 0af632b5c9..833148b56a 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index d9dd3e2f48..c63ae76443 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 50eb752bc4..723d55d568 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 50eb752bc4..723d55d568 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 50eb752bc4..723d55d568 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 5d6afd5057..41cd46fa3e 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -1372,13 +1372,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 53a0c1eee2..6cb62bbb4c 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1367,13 +1367,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 9a04493486..66df5462b6 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 1f84dfd86d..4c000c5d9c 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 3c8f5f0444..2e5f65a37c 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1365,13 +1365,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 396fbeba0d..127bfc702b 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1366,13 +1366,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all