Add missing CHAMBER options (for M141) (#13371)

This commit is contained in:
Andrei Pozolotin 2019-03-11 16:50:07 -05:00 committed by Scott Lahteine
parent 0375e92847
commit 31ff7da7ac
95 changed files with 382 additions and 2 deletions

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 250 #define HEATER_4_MAXTEMP 250
#define HEATER_5_MAXTEMP 250 #define HEATER_5_MAXTEMP 250
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 260 #define HEATER_4_MAXTEMP 260
#define HEATER_5_MAXTEMP 260 #define HEATER_5_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -404,6 +404,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -413,6 +415,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -424,6 +427,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 260 #define HEATER_4_MAXTEMP 260
#define HEATER_5_MAXTEMP 260 #define HEATER_5_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 415 #define HEATER_4_MAXTEMP 415
#define HEATER_5_MAXTEMP 415 #define HEATER_5_MAXTEMP 415
#define BED_MAXTEMP 165 #define BED_MAXTEMP 165
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -405,6 +405,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -414,6 +416,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -425,6 +428,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 75 #define BED_MAXTEMP 75
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -398,6 +398,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -407,6 +409,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -418,6 +421,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 245 #define HEATER_4_MAXTEMP 245
#define HEATER_5_MAXTEMP 245 #define HEATER_5_MAXTEMP 245
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -441,6 +441,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -449,6 +451,7 @@
#define HEATER_3_MINTEMP 5 #define HEATER_3_MINTEMP 5
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -459,10 +462,11 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#if ENABLED(BED_AC) #if ENABLED(BED_AC)
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#else #else
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#endif #endif
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -411,6 +411,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -420,6 +422,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -431,6 +434,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -405,6 +405,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -414,6 +416,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -425,6 +428,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -401,6 +401,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -410,6 +412,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -421,6 +424,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -416,6 +416,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -425,6 +427,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -436,6 +439,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -404,6 +404,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -413,6 +415,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -424,6 +427,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 250 #define HEATER_4_MAXTEMP 250
#define HEATER_5_MAXTEMP 250 #define HEATER_5_MAXTEMP 250
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -399,6 +399,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -408,6 +410,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -419,6 +422,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -427,6 +427,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -436,6 +438,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -447,6 +450,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -423,6 +423,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -432,6 +434,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -443,6 +446,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 260 #define HEATER_4_MAXTEMP 260
#define HEATER_5_MAXTEMP 260 #define HEATER_5_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -398,6 +398,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -407,6 +409,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -422,6 +425,7 @@
// Tronxy X5S-2E: // Tronxy X5S-2E:
// The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient. // The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient.
#define BED_MAXTEMP 81 #define BED_MAXTEMP 81
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -416,6 +416,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -425,6 +427,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -436,6 +439,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -415,6 +415,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -424,6 +426,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -435,6 +438,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -417,6 +417,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -426,6 +428,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -437,6 +440,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 250 #define HEATER_4_MAXTEMP 250
#define HEATER_5_MAXTEMP 250 #define HEATER_5_MAXTEMP 250
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 250 #define HEATER_4_MAXTEMP 250
#define HEATER_5_MAXTEMP 250 #define HEATER_5_MAXTEMP 250
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -401,6 +401,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -410,6 +412,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -421,6 +424,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -400,6 +400,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -409,6 +411,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -420,6 +423,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -404,6 +404,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -413,6 +415,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -424,6 +427,7 @@
#define HEATER_4_MAXTEMP 245 #define HEATER_4_MAXTEMP 245
#define HEATER_5_MAXTEMP 245 #define HEATER_5_MAXTEMP 245
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -397,6 +397,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -406,6 +408,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -417,6 +420,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================

View File

@ -396,6 +396,8 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -405,6 +407,7 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -416,6 +419,7 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================