From 3315f6faa4fed3fde158013c8575d6bc6b813f3d Mon Sep 17 00:00:00 2001 From: Victor Oliveira Date: Thu, 14 Jul 2022 03:30:00 -0300 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Creality3D=20v4.2.5=20/=20CR200B=20?= =?UTF-8?q?(#24491)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/core/boards.h | 47 ++++---- Marlin/src/pins/pins.h | 2 + Marlin/src/pins/stm32f1/pins_CREALITY_V4.h | 108 +++++++++++++------ Marlin/src/pins/stm32f1/pins_CREALITY_V425.h | 77 +++++++++++++ 4 files changed, 176 insertions(+), 58 deletions(-) create mode 100644 Marlin/src/pins/stm32f1/pins_CREALITY_V425.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 2e71c632de..fa11c97380 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -343,29 +343,30 @@ #define BOARD_CREALITY_V4 4040 // Creality v4.x (STM32F103RC / STM32F103RE) #define BOARD_CREALITY_V422 4041 // Creality v4.2.2 (STM32F103RC / STM32F103RE) #define BOARD_CREALITY_V423 4042 // Creality v4.2.3 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V427 4043 // Creality v4.2.7 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V4210 4044 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30 -#define BOARD_CREALITY_V431 4045 // Creality v4.3.1 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_A 4046 // Creality v4.3.1a (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_B 4047 // Creality v4.3.1b (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_C 4048 // Creality v4.3.1c (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V431_D 4049 // Creality v4.3.1d (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V452 4050 // Creality v4.5.2 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V453 4051 // Creality v4.5.3 (STM32F103RC / STM32F103RE) -#define BOARD_CREALITY_V24S1 4052 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 -#define BOARD_CREALITY_V24S1_301 4053 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 -#define BOARD_CREALITY_V25S1 4054 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro -#define BOARD_TRIGORILLA_PRO 4055 // Trigorilla Pro (STM32F103ZE) -#define BOARD_FLY_MINI 4056 // FLYmaker FLY MINI (STM32F103RC) -#define BOARD_FLSUN_HISPEED 4057 // FLSUN HiSpeedV1 (STM32F103VE) -#define BOARD_BEAST 4058 // STM32F103RE Libmaple-based controller -#define BOARD_MINGDA_MPX_ARM_MINI 4059 // STM32F103ZE Mingda MD-16 -#define BOARD_GTM32_PRO_VD 4060 // STM32F103VE controller -#define BOARD_ZONESTAR_ZM3E2 4061 // Zonestar ZM3E2 (STM32F103RC) -#define BOARD_ZONESTAR_ZM3E4 4062 // Zonestar ZM3E4 V1 (STM32F103VC) -#define BOARD_ZONESTAR_ZM3E4V2 4063 // Zonestar ZM3E4 V2 (STM32F103VC) -#define BOARD_ERYONE_ERY32_MINI 4064 // Eryone Ery32 mini (STM32F103VE) -#define BOARD_PANDA_PI_V29 4065 // Panda Pi V2.9 - Standalone (STM32F103RC) +#define BOARD_CREALITY_V425 4043 // Creality v4.2.5 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V427 4044 // Creality v4.2.7 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V4210 4045 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30 +#define BOARD_CREALITY_V431 4046 // Creality v4.3.1 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_A 4047 // Creality v4.3.1a (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_B 4048 // Creality v4.3.1b (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_C 4049 // Creality v4.3.1c (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V431_D 4050 // Creality v4.3.1d (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V452 4051 // Creality v4.5.2 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V453 4052 // Creality v4.5.3 (STM32F103RC / STM32F103RE) +#define BOARD_CREALITY_V24S1 4053 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7 +#define BOARD_CREALITY_V24S1_301 4054 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1 +#define BOARD_CREALITY_V25S1 4055 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro +#define BOARD_TRIGORILLA_PRO 4056 // Trigorilla Pro (STM32F103ZE) +#define BOARD_FLY_MINI 4057 // FLYmaker FLY MINI (STM32F103RC) +#define BOARD_FLSUN_HISPEED 4058 // FLSUN HiSpeedV1 (STM32F103VE) +#define BOARD_BEAST 4059 // STM32F103RE Libmaple-based controller +#define BOARD_MINGDA_MPX_ARM_MINI 4060 // STM32F103ZE Mingda MD-16 +#define BOARD_GTM32_PRO_VD 4061 // STM32F103VE controller +#define BOARD_ZONESTAR_ZM3E2 4062 // Zonestar ZM3E2 (STM32F103RC) +#define BOARD_ZONESTAR_ZM3E4 4063 // Zonestar ZM3E4 V1 (STM32F103VC) +#define BOARD_ZONESTAR_ZM3E4V2 4064 // Zonestar ZM3E4 V2 (STM32F103VC) +#define BOARD_ERYONE_ERY32_MINI 4065 // Eryone Ery32 mini (STM32F103VE) +#define BOARD_PANDA_PI_V29 4066 // Panda Pi V2.9 - Standalone (STM32F103RC) // // ARM Cortex-M4F diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 8457cdc4ff..8925993c36 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -567,6 +567,8 @@ #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RE_creality env:STM32F103RE_creality_xfer env:STM32F103RC_creality env:STM32F103RC_creality_xfer env:STM32F103RE_creality_maple #elif MB(CREALITY_V4210) #include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RE_creality env:STM32F103RE_creality_xfer env:STM32F103RC_creality env:STM32F103RC_creality_xfer env:STM32F103RE_creality_maple +#elif MB(CREALITY_V425) + #include "stm32f1/pins_CREALITY_V425.h" // STM32F1 env:STM32F103RE_creality env:STM32F103RE_creality_xfer env:STM32F103RC_creality env:STM32F103RC_creality_xfer env:STM32F103RE_creality_maple #elif MB(CREALITY_V422) #include "stm32f1/pins_CREALITY_V422.h" // STM32F1 env:STM32F103RE_creality env:STM32F103RE_creality_xfer env:STM32F103RC_creality env:STM32F103RC_creality_xfer env:STM32F103RE_creality_maple #elif MB(CREALITY_V423) diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index cb11c3e53b..7e3979b87e 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -77,8 +77,12 @@ // // Limit Switches // -#define X_STOP_PIN PA5 -#define Y_STOP_PIN PA6 +#ifndef X_STOP_PIN + #define X_STOP_PIN PA5 +#endif +#ifndef Y_STOP_PIN + #define Y_STOP_PIN PA6 +#endif #ifndef Z_STOP_PIN #define Z_STOP_PIN PA7 #endif @@ -153,7 +157,7 @@ // SD Card // #define SD_DETECT_PIN PC7 -#define SDCARD_CONNECTION ONBOARD +#define SDCARD_CONNECTION ONBOARD #define SDIO_SUPPORT #define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer @@ -161,53 +165,87 @@ #if ENABLED(RET6_12864_LCD) - // RET6 12864 LCD - #define LCD_PINS_RS PB12 - #define LCD_PINS_ENABLE PB15 - #define LCD_PINS_D4 PB13 - - #define BTN_ENC PB2 - #define BTN_EN1 PB10 - #define BTN_EN2 PB14 + /** + * RET6 12864 LCD + * ------ + * PC6 |10 9 | PB2 + * PB10 | 8 7 | PE8 + * PB14 6 5 | PB13 + * PB12 | 4 3 | PB15 + * GND | 2 1 | 5V + * ------ + * EXP1 + */ + #define EXP1_03_PIN PB15 + #define EXP1_04_PIN PB12 + #define EXP1_05_PIN PB13 + #define EXP1_06_PIN PB14 + #define EXP1_07_PIN PE8 + #define EXP1_08_PIN PB10 + #define EXP1_09_PIN PB2 + #define EXP1_10_PIN PC6 #ifndef HAS_PIN_27_BOARD - #define BEEPER_PIN PC6 + #define BEEPER_PIN EXP1_10_PIN #endif #elif ENABLED(VET6_12864_LCD) - // VET6 12864 LCD - #define LCD_PINS_RS PA4 - #define LCD_PINS_ENABLE PA7 - #define LCD_PINS_D4 PA5 - - #define BTN_ENC PC5 - #define BTN_EN1 PB10 - #define BTN_EN2 PA6 + /** + * VET6 12864 LCD + * ------ + * ? |10 9 | PC5 + * PB10 | 8 7 | ? + * PA6 6 5 | PA5 + * PA4 | 4 3 | PA7 + * GND | 2 1 | 5V + * ------ + * EXP1 + */ + #define EXP1_03_PIN PA7 + #define EXP1_04_PIN PA4 + #define EXP1_05_PIN PA5 + #define EXP1_06_PIN PA6 + #define EXP1_07_PIN -1 + #define EXP1_08_PIN PB10 + #define EXP1_09_PIN PC5 + #define EXP1_10_PIN -1 #else #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." #endif -#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI + #define LCD_PINS_RS EXP1_04_PIN + #define LCD_PINS_ENABLE EXP1_03_PIN + #define LCD_PINS_D4 EXP1_05_PIN - // RET6 DWIN ENCODER LCD - #define BTN_ENC PB14 - #define BTN_EN1 PB15 - #define BTN_EN2 PB12 + #define BTN_ENC EXP1_09_PIN + #define BTN_EN1 EXP1_08_PIN + #define BTN_EN2 EXP1_06_PIN - //#define LCD_LED_PIN PB2 - #ifndef BEEPER_PIN - #define BEEPER_PIN PB13 +#elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD) + + #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI + // RET6 DWIN ENCODER LCD + #define EXP1_03_PIN PB15 + #define EXP1_04_PIN PB12 + #define EXP1_05_PIN PB13 + #define EXP1_06_PIN PB14 + //#define LCD_LED_PIN PB2 + #else + // VET6 DWIN ENCODER LCD + #define EXP1_03_PIN PA7 + #define EXP1_04_PIN PA4 + #define EXP1_05_PIN PA5 + #define EXP1_06_PIN PA6 #endif -#elif ENABLED(DWIN_VET6_CREALITY_LCD) + #define BTN_ENC EXP1_06_PIN + #define BTN_EN1 EXP1_03_PIN + #define BTN_EN2 EXP1_04_PIN - // VET6 DWIN ENCODER LCD - #define BTN_ENC PA6 - #define BTN_EN1 PA7 - #define BTN_EN2 PA4 - - #define BEEPER_PIN PA5 + #ifndef BEEPER_PIN + #define BEEPER_PIN EXP1_05_PIN + #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h new file mode 100644 index 0000000000..46f437ecaf --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h @@ -0,0 +1,77 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * CREALITY 4.2.5 (STM32F103RE / STM32F103RC) board pin assignments + */ + +#include "env_validate.h" + +#if HAS_MULTI_HOTEND || E_STEPPERS > 1 + #error "Creality v4.2.5 only supports 1 hotend / E stepper." +#endif + +#define BOARD_INFO_NAME "Creality V4.2.5" +#define DEFAULT_MACHINE_NAME "CR200B" + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 + #undef NO_EEPROM_SELECTED +#elif DISABLED(IIC_BL24CXX_EEPROM) + #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX +#endif + +// +// Servos +// +#define SERVO0_PIN PB1 // BLTouch OUT + +// +// Limit Switches +// +#define X_STOP_PIN PA3 +#define Y_STOP_PIN PA4 +#define Z_STOP_PIN PA5 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PB0 // BLTouch IN +#endif + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA6 // "Pulled-high" +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA0 // HEATER1 +#define HEATER_BED_PIN PA1 // HOT BED +#define FAN_PIN PA2 // FAN + +#include "pins_CREALITY_V4.h"