Detab some HAL files

This commit is contained in:
Scott Lahteine 2018-01-05 10:25:42 -06:00
parent 1c41de16d4
commit 3319765034
2 changed files with 62 additions and 62 deletions

View File

@ -89,25 +89,25 @@ void HardwareSerial::begin(uint32_t baudrate) {
PINSEL_ConfigPin(&PinCfg);
}
/* Initialize UART Configuration parameter structure to default state:
* Baudrate = 9600bps
* 8 data bit
* 1 Stop bit
* None parity
*/
UART_ConfigStructInit(&UARTConfigStruct);
/* Initialize UART Configuration parameter structure to default state:
* Baudrate = 9600bps
* 8 data bit
* 1 Stop bit
* None parity
*/
UART_ConfigStructInit(&UARTConfigStruct);
// Re-configure baudrate
UARTConfigStruct.Baud_rate = baudrate;
// Re-configure baudrate
UARTConfigStruct.Baud_rate = baudrate;
// Initialize eripheral with given to corresponding parameter
// Initialize eripheral with given to corresponding parameter
UART_Init(UARTx, &UARTConfigStruct);
// Enable and reset the TX and RX FIFOs
UART_FIFOConfigStructInit(&FIFOConfig);
UART_FIFOConfig(UARTx, &FIFOConfig);
// Enable UART Transmit
// Enable UART Transmit
UART_TxCmd(UARTx, ENABLE);
// Configure Interrupts
@ -234,9 +234,9 @@ void HardwareSerial::IRQHandler() {
uint8_t LSRValue, byte;
IIRValue = UART_GetIntId(UARTx);
IIRValue &= UART_IIR_INTID_MASK; /* check bit 1~3, interrupt identification */
IIRValue &= UART_IIR_INTID_MASK; /* check bit 1~3, interrupt identification */
if ( IIRValue == UART_IIR_INTID_RLS ) /* Receive Line Status */
if ( IIRValue == UART_IIR_INTID_RLS ) /* Receive Line Status */
{
LSRValue = UART_GetLineStatus(UARTx);
@ -246,13 +246,13 @@ void HardwareSerial::IRQHandler() {
/* There are errors or break interrupt */
/* Read LSR will clear the interrupt */
Status = LSRValue;
byte = UART_ReceiveByte(UARTx); /* Dummy read on RX to clear
byte = UART_ReceiveByte(UARTx); /* Dummy read on RX to clear
interrupt, then bail out */
return;
}
}
if ( IIRValue == UART_IIR_INTID_RDA ) /* Receive Data Available */
if ( IIRValue == UART_IIR_INTID_RDA ) /* Receive Data Available */
{
/* Clear the FIFO */
while ( UART_Receive(UARTx, &byte, 1, NONE_BLOCKING) ) {
@ -265,10 +265,10 @@ void HardwareSerial::IRQHandler() {
break;
}
}
else if ( IIRValue == UART_IIR_INTID_CTI ) /* Character timeout indicator */
else if ( IIRValue == UART_IIR_INTID_CTI ) /* Character timeout indicator */
{
/* Character Time-out indicator */
Status |= 0x100; /* Bit 9 as the CTI error */
Status |= 0x100; /* Bit 9 as the CTI error */
}
#if TX_BUFFER_SIZE > 0
@ -302,12 +302,12 @@ extern "C" {
#endif
/*****************************************************************************
** Function name: UART0_IRQHandler
** Function name: UART0_IRQHandler
**
** Descriptions: UART0 interrupt handler
** Descriptions: UART0 interrupt handler
**
** parameters: None
** Returned value: None
** parameters: None
** Returned value: None
**
*****************************************************************************/
void UART0_IRQHandler (void)
@ -316,12 +316,12 @@ void UART0_IRQHandler (void)
}
/*****************************************************************************
** Function name: UART1_IRQHandler
** Function name: UART1_IRQHandler
**
** Descriptions: UART1 interrupt handler
** Descriptions: UART1 interrupt handler
**
** parameters: None
** Returned value: None
** parameters: None
** Returned value: None
**
*****************************************************************************/
void UART1_IRQHandler (void)
@ -330,12 +330,12 @@ void UART1_IRQHandler (void)
}
/*****************************************************************************
** Function name: UART2_IRQHandler
** Function name: UART2_IRQHandler
**
** Descriptions: UART2 interrupt handler
** Descriptions: UART2 interrupt handler
**
** parameters: None
** Returned value: None
** parameters: None
** Returned value: None
**
*****************************************************************************/
void UART2_IRQHandler (void)
@ -344,12 +344,12 @@ void UART2_IRQHandler (void)
}
/*****************************************************************************
** Function name: UART3_IRQHandler
** Function name: UART3_IRQHandler
**
** Descriptions: UART3 interrupt handler
** Descriptions: UART3 interrupt handler
**
** parameters: None
** Returned value: None
** parameters: None
** Returned value: None
**
*****************************************************************************/
void UART3_IRQHandler (void)

View File

@ -49,45 +49,45 @@ namespace PersistentStore {
char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
bool access_start() {
if (!card.cardOK) return false;
int16_t bytes_read = 0;
const char eeprom_zero = 0xFF;
card.openFile((char *)CONFIG_FILE_NAME,true);
bytes_read = card.read (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
if (bytes_read == -1) return false;
for (; bytes_read < HAL_STM32F1_EEPROM_SIZE; bytes_read++) {
HAL_STM32F1_eeprom_content[bytes_read] = eeprom_zero;
}
card.closefile();
return true;
if (!card.cardOK) return false;
int16_t bytes_read = 0;
const char eeprom_zero = 0xFF;
card.openFile((char *)CONFIG_FILE_NAME,true);
bytes_read = card.read (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
if (bytes_read == -1) return false;
for (; bytes_read < HAL_STM32F1_EEPROM_SIZE; bytes_read++) {
HAL_STM32F1_eeprom_content[bytes_read] = eeprom_zero;
}
card.closefile();
return true;
}
bool access_finish(){
if (!card.cardOK) return false;
int16_t bytes_written = 0;
card.openFile((char *)CONFIG_FILE_NAME,true);
bytes_written = card.write (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
card.closefile();
return (bytes_written == HAL_STM32F1_EEPROM_SIZE);
if (!card.cardOK) return false;
int16_t bytes_written = 0;
card.openFile((char *)CONFIG_FILE_NAME,true);
bytes_written = card.write (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
card.closefile();
return (bytes_written == HAL_STM32F1_EEPROM_SIZE);
}
bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
for (int i = 0; i < size; i++) {
HAL_STM32F1_eeprom_content [pos + i] = value[i];
}
crc16(crc, value, size);
pos += size;
return false;
for (int i = 0; i < size; i++) {
HAL_STM32F1_eeprom_content [pos + i] = value[i];
}
crc16(crc, value, size);
pos += size;
return false;
}
bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
for (int i = 0; i < size; i++) {
value[i] = HAL_STM32F1_eeprom_content [pos + i];
}
crc16(crc, value, size);
pos += size;
return false;
for (int i = 0; i < size; i++) {
value[i] = HAL_STM32F1_eeprom_content [pos + i];
}
crc16(crc, value, size);
pos += size;
return false;
}
} // PersistentStore::