Add HAL_timer_start for AVR, use stepper timer to time pulses

This commit is contained in:
Scott Lahteine 2018-06-03 01:43:00 -05:00
parent e970e429b6
commit 3701869e6c
4 changed files with 41 additions and 36 deletions

View File

@ -34,6 +34,7 @@
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "HAL.h"
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
// Externals // Externals
@ -74,9 +75,11 @@
// -------------------------------------------------------------------------- // --------------------------------------------------------------------------
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#include "../../sd/SdFatUtil.h" #include "../../sd/SdFatUtil.h"
int freeMemory() { return SdFatUtil::FreeRam(); } int freeMemory() { return SdFatUtil::FreeRam(); }
#else
#else // !SDSUPPORT
extern "C" { extern "C" {
extern char __bss_end; extern char __bss_end;
@ -93,7 +96,6 @@ extern "C" {
} }
} }
#endif //!SDSUPPORT #endif // !SDSUPPORT
#endif
#endif // __AVR__

View File

@ -124,7 +124,7 @@ extern "C" {
#define STEP_TIMER_NUM 1 #define STEP_TIMER_NUM 1
#define TEMP_TIMER_NUM 0 #define TEMP_TIMER_NUM 0
#define PULSE_TIMER_NUM TEMP_TIMER_NUM #define PULSE_TIMER_NUM STEP_TIMER_NUM
#define HAL_STEPPER_TIMER_RATE HAL_TIMER_RATE #define HAL_STEPPER_TIMER_RATE HAL_TIMER_RATE
#define HAL_TICKS_PER_US ((HAL_STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double #define HAL_TICKS_PER_US ((HAL_STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
@ -139,7 +139,7 @@ extern "C" {
#define TIMER_OCR_0 OCR0A #define TIMER_OCR_0 OCR0A
#define TIMER_COUNTER_0 TCNT0 #define TIMER_COUNTER_0 TCNT0
#define PULSE_TIMER_PRESCALE 8 #define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A) #define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A) #define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
@ -149,7 +149,36 @@ extern "C" {
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B) #define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B) #define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
#define HAL_timer_start(timer_num, frequency) FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
UNUSED(frequency);
switch (timer_num) {
case STEP_TIMER_NUM:
// waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
// (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
OCR1A = 0x4000;
TCNT1 = 0;
break;
case TEMP_TIMER_NUM:
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
break;
}
}
#define _CAT(a, ...) a ## __VA_ARGS__ #define _CAT(a, ...) a ## __VA_ARGS__
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare) #define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)

View File

@ -1993,27 +1993,8 @@ void Stepper::init() {
E_AXIS_INIT(4); E_AXIS_INIT(4);
#endif #endif
#ifdef __AVR__ // Init Stepper ISR to 122 Hz for quick starting
// waveform generation = 0100 = CTC HAL_timer_start(STEP_TIMER_NUM, 122);
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
OCR1A = 0x4000;
TCNT1 = 0;
#else
// Init Stepper ISR to 122 Hz for quick starting
HAL_timer_start(STEP_TIMER_NUM, 122);
#endif
ENABLE_STEPPER_DRIVER_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT();

View File

@ -1234,14 +1234,7 @@ void Temperature::init() {
HAL_ANALOG_SELECT(FILWIDTH_PIN); HAL_ANALOG_SELECT(FILWIDTH_PIN);
#endif #endif
// todo: HAL: fix abstraction HAL_timer_start(TEMP_TIMER_NUM, TEMP_TIMER_FREQUENCY);
#ifdef __AVR__
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
#else
HAL_timer_start(TEMP_TIMER_NUM, TEMP_TIMER_FREQUENCY);
#endif
ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_TEMPERATURE_INTERRUPT();
#if HAS_AUTO_FAN_0 #if HAS_AUTO_FAN_0