dropsegments => MIN_SEGMENTS_FOR_MOVE

This commit is contained in:
Scott Lahteine 2016-08-20 18:46:16 -05:00
parent 4d4c00d69c
commit 374f8d2014
20 changed files with 40 additions and 20 deletions

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -133,6 +133,8 @@
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_PROBE_DEPLOY_HEIGHT instead."
#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
#error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT Please update your configuration."
#elif !defined(MIN_SEGMENTS_FOR_MOVE)
#error "\"dropsegments\" is replaced with MIN_SEGMENTS_FOR_MOVE (and increases by 1). Please update Configuration_adv.h."
#endif
/**

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -536,7 +536,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 2; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 3
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -538,7 +538,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -532,7 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -532,7 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -531,7 +531,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -536,7 +536,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -532,7 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -530,7 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// @section temperature

View File

@ -626,7 +626,7 @@ void Planner::check_axes_activity() {
block->step_event_count = MAX4(block->steps[X_AXIS], block->steps[Y_AXIS], block->steps[Z_AXIS], block->steps[E_AXIS]);
// Bail if this is a zero-length block
if (block->step_event_count <= dropsegments) return;
if (block->step_event_count < MIN_SEGMENTS_FOR_MOVE) return;
// For a mixing extruder, get a magnified step_event_count for each
#if ENABLED(MIXING_EXTRUDER)
@ -808,7 +808,7 @@ void Planner::check_axes_activity() {
#endif
delta_mm[E_AXIS] = 0.01 * (de * steps_to_mm[E_AXIS]) * volumetric_multiplier[extruder] * flow_percentage[extruder];
if (block->steps[X_AXIS] <= dropsegments && block->steps[Y_AXIS] <= dropsegments && block->steps[Z_AXIS] <= dropsegments) {
if (block->steps[X_AXIS] < MIN_SEGMENTS_FOR_MOVE && block->steps[Y_AXIS] < MIN_SEGMENTS_FOR_MOVE && block->steps[Z_AXIS] < MIN_SEGMENTS_FOR_MOVE) {
block->millimeters = fabs(delta_mm[E_AXIS]);
}
else {