Emergency Parser for STM32 (#18095)

This commit is contained in:
rudihorn 2020-05-26 06:43:29 +01:00 committed by GitHub
parent 8b320f9095
commit 38ccc769f7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 232 additions and 22 deletions

View File

@ -23,6 +23,7 @@
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "HAL.h" #include "HAL.h"
#include "usb_serial.h"
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
#include "../shared/Delay.h" #include "../shared/Delay.h"
@ -79,6 +80,8 @@ void HAL_init() {
#endif #endif
SetSoftwareSerialTimerInterruptPriority(); SetSoftwareSerialTimerInterruptPriority();
TERN_(EMERGENCY_PARSER, USB_Hook_init());
} }
void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); } void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }

View File

@ -30,6 +30,7 @@
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "fastio.h" #include "fastio.h"
#include "watchdog.h" #include "watchdog.h"
#include "MarlinSerial.h"
#include "../../inc/MarlinConfigPre.h" #include "../../inc/MarlinConfigPre.h"
@ -48,17 +49,17 @@
#elif SERIAL_PORT == -1 #elif SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB #define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 1 #elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1 #define MYSERIAL0 MSerial1
#elif SERIAL_PORT == 2 #elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2 #define MYSERIAL0 MSerial2
#elif SERIAL_PORT == 3 #elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3 #define MYSERIAL0 MSerial3
#elif SERIAL_PORT == 4 #elif SERIAL_PORT == 4
#define MYSERIAL0 Serial4 #define MYSERIAL0 MSerial4
#elif SERIAL_PORT == 5 #elif SERIAL_PORT == 5
#define MYSERIAL0 Serial5 #define MYSERIAL0 MSerial5
#elif SERIAL_PORT == 6 #elif SERIAL_PORT == 6
#define MYSERIAL0 Serial6 #define MYSERIAL0 MSerial6
#else #else
#error "SERIAL_PORT must be from -1 to 6. Please update your configuration." #error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif #endif
@ -72,17 +73,17 @@
#elif SERIAL_PORT_2 == -1 #elif SERIAL_PORT_2 == -1
#define MYSERIAL1 SerialUSB #define MYSERIAL1 SerialUSB
#elif SERIAL_PORT_2 == 1 #elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial1 #define MYSERIAL1 MSerial1
#elif SERIAL_PORT_2 == 2 #elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial2 #define MYSERIAL1 MSerial2
#elif SERIAL_PORT_2 == 3 #elif SERIAL_PORT_2 == 3
#define MYSERIAL1 Serial3 #define MYSERIAL1 MSerial3
#elif SERIAL_PORT_2 == 4 #elif SERIAL_PORT_2 == 4
#define MYSERIAL1 Serial4 #define MYSERIAL1 MSerial4
#elif SERIAL_PORT_2 == 5 #elif SERIAL_PORT_2 == 5
#define MYSERIAL1 Serial5 #define MYSERIAL1 MSerial5
#elif SERIAL_PORT_2 == 6 #elif SERIAL_PORT_2 == 6
#define MYSERIAL1 Serial6 #define MYSERIAL1 MSerial6
#else #else
#error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration." #error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
#endif #endif
@ -100,17 +101,17 @@
#elif DGUS_SERIAL_PORT == -1 #elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL SerialUSB #define DGUS_SERIAL SerialUSB
#elif DGUS_SERIAL_PORT == 1 #elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial1 #define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2 #elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial2 #define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3 #elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL Serial3 #define DGUS_SERIAL MSerial3
#elif DGUS_SERIAL_PORT == 4 #elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL Serial4 #define DGUS_SERIAL MSerial4
#elif DGUS_SERIAL_PORT == 5 #elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL Serial5 #define DGUS_SERIAL MSerial5
#elif DGUS_SERIAL_PORT == 6 #elif DGUS_SERIAL_PORT == 6
#define DGUS_SERIAL Serial6 #define DGUS_SERIAL MSerial6
#else #else
#error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration." #error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif #endif

View File

@ -0,0 +1,80 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#include "MarlinSerial.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
#define DECLARE_SERIAL_PORT(ser_num) \
void _rx_complete_irq_ ## ser_num (serial_t * obj); \
MarlinSerial MSerial ## ser_num (USART ## ser_num, &_rx_complete_irq_ ## ser_num); \
void _rx_complete_irq_ ## ser_num (serial_t * obj) { MSerial ## ser_num ._rx_complete_irq(obj); }
#define DECLARE_SERIAL_PORT_EXP(ser_num) DECLARE_SERIAL_PORT(ser_num)
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(SERIAL_PORT)
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
DECLARE_SERIAL_PORT_EXP(SERIAL_PORT_2)
#endif
#if defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(DGUS_SERIAL_PORT)
#endif
void MarlinSerial::begin(unsigned long baud, uint8_t config) {
HardwareSerial::begin(baud, config);
// replace the IRQ callback with the one we have defined
#if ENABLED(EMERGENCY_PARSER)
_serial.rx_callback = _rx_callback;
#endif
}
// This function is Copyright (c) 2006 Nicholas Zambetti.
void MarlinSerial::_rx_complete_irq(serial_t *obj) {
// No Parity error, read byte and store it in the buffer if there is room
unsigned char c;
if (uart_getc(obj, &c) == 0) {
rx_buffer_index_t i = (unsigned int)(obj->rx_head + 1) % SERIAL_RX_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != obj->rx_tail) {
obj->rx_buff[obj->rx_head] = c;
obj->rx_head = i;
}
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(emergency_state, c);
#endif
}
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

View File

@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
typedef void (*usart_rx_callback_t)(serial_t * obj);
class MarlinSerial : public HardwareSerial {
public:
MarlinSerial(void* peripheral, usart_rx_callback_t rx_callback) :
HardwareSerial(peripheral), _rx_callback(rx_callback)
#if ENABLED(EMERGENCY_PARSER)
, emergency_state(EmergencyParser::State::EP_RESET)
#endif
{ }
void begin(unsigned long baud, uint8_t config);
inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void _rx_complete_irq(serial_t* obj);
protected:
usart_rx_callback_t _rx_callback;
#if ENABLED(EMERGENCY_PARSER)
EmergencyParser::State emergency_state;
#endif
};
extern MarlinSerial MSerial1;
extern MarlinSerial MSerial2;
extern MarlinSerial MSerial3;
extern MarlinSerial MSerial4;
extern MarlinSerial MSerial5;

View File

@ -28,10 +28,6 @@
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" // #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
//#endif //#endif
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN) #if ENABLED(FAST_PWM_FAN)
#error "FAST_PWM_FAN is not yet implemented for this platform." #error "FAST_PWM_FAN is not yet implemented for this platform."
#endif #endif

View File

@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "usb_serial.h"
#include "../../feature/e_parser.h"
EmergencyParser::State emergency_state = EmergencyParser::State::EP_RESET;
int8_t (*USBD_CDC_Receive_original) (uint8_t *Buf, uint32_t *Len) = nullptr;
static int8_t USBD_CDC_Receive_hook(uint8_t *Buf, uint32_t *Len) {
for (uint32_t i = 0; i < *Len; i++)
emergency_parser.update(emergency_state, Buf[i]);
return USBD_CDC_Receive_original(Buf, Len);
}
typedef struct _USBD_CDC_Itf {
int8_t (* Init)(void);
int8_t (* DeInit)(void);
int8_t (* Control)(uint8_t cmd, uint8_t *pbuf, uint16_t length);
int8_t (* Receive)(uint8_t *Buf, uint32_t *Len);
int8_t (* Transferred)(void);
} USBD_CDC_ItfTypeDef;
extern USBD_CDC_ItfTypeDef USBD_CDC_fops;
void USB_Hook_init() {
USBD_CDC_Receive_original = USBD_CDC_fops.Receive;
USBD_CDC_fops.Receive = USBD_CDC_Receive_hook;
}
#endif // EMERGENCY_PARSER
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

View File

@ -0,0 +1,21 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
void USB_Hook_init();