MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

✨ Zonestar ZM3E2, ZM3E4 V1, ZM3E4 V2 (#22498)

Browse Source
This commit is contained in:
ellensp 2021-08-08 19:45:51 +12:00 committed by Scott Lahteine
parent 86e78410d6
commit 3924545912
28 changed files with 1083 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
.github/workflows/test-builds.yml vendored
View File

@ -58,15 +58,16 @@ jobs:
#- STM32F103RC_btt_maple
- STM32F103RC_btt_USB_maple
- STM32F103RC_fysetc
- STM32F103RC_fysetc_maple
- STM32F103RC_meeb
- jgaurora_a5s_a1
- jgaurora_a5s_a1_maple
- STM32F103VE_longer_maple
#- mks_robin_maple
- mks_robin_lite
- mks_robin_pro
- mks_robin_lite_maple
- mks_robin_pro_maple
#- mks_robin_nano35_maple
#- STM32F103RET6_creality_maple
- STM32F103VE_ZM3E4V2_USB_maple
# STM32 (ST) Environments

3
Marlin/src/core/boards.h
View File

@ -346,6 +346,9 @@
#define BOARD_BEAST 4048 // STM32F103RET6 Libmaple-based controller
#define BOARD_MINGDA_MPX_ARM_MINI 4049 // STM32F103ZET6 Mingda MD-16
#define BOARD_GTM32_PRO_VD 4050 // STM32F103VET6 controller
#define BOARD_ZONESTAR_ZM3E2 4051 // Zonestar ZM3E2 (STM32F103RCT6)
#define BOARD_ZONESTAR_ZM3E4 4052 // Zonestar ZM3E4 V1 (STM32F103VCT6)
#define BOARD_ZONESTAR_ZM3E4V2 4053 // Zonestar ZM3E4 V2 (STM32F103VCT6)
//
// ARM Cortex-M4F

2
Marlin/src/lcd/tft_io/touch_calibration.cpp
View File

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

2
Marlin/src/lcd/tft_io/touch_calibration.h
View File

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

2
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
View File

@ -212,7 +212,7 @@
* BEEPER | 5 6 ENT (BTN_ENC) (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2)
* (SKR_RX1) TX | 7 8 | RX (SKR_TX1) Reset | 7 8 | P0_19 (BTN_EN1)
* NC | 9 10 | NC (BTN_ENC) P0_16 | 9 10 | P2_08 (BEEPER)
* ------ ------
* ------ ------
*/
#define BEEPER_PIN EXP1_10_PIN

6
Marlin/src/pins/pins.h
View File

@ -561,6 +561,12 @@
#include "stm32f1/pins_BEAST.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple
#elif MB(MINGDA_MPX_ARM_MINI)
#include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:mingda_mpx_arm_mini
#elif MB(ZONESTAR_ZM3E2)
#include "stm32f1/pins_ZM3E2_V1_0.h" // STM32F1 env:STM32F103RC_ZM3E2_USB env:STM32F103RC_ZM3E2_USB_maple
#elif MB(ZONESTAR_ZM3E4)
#include "stm32f1/pins_ZM3E4_V1_0.h" // STM32F1 env:STM32F103VC_ZM3E4_USB env:STM32F103VC_ZM3E4_USB_maple
#elif MB(ZONESTAR_ZM3E4V2)
#include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple
//
// ARM Cortex-M4F

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h
View File

@ -23,7 +23,7 @@
#define SKR_MINI_E3_V2
#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4
#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
// Onboard I2C EEPROM
#if NO_EEPROM_SELECTED

17
Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
View File

@ -45,14 +45,19 @@
#endif
//#define MCU_STM32F103ZE // not yet required
// Enable EEPROM Emulation for this board, so that we don't overwrite factory data
#if NO_EEPROM_SELECTED
//#define I2C_EEPROM // AT24C64
//#define FLASH_EEPROM_EMULATION
#endif
//#define I2C_EEPROM // AT24C64
//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB
//#define FLASH_EEPROM_EMULATION
//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB
//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL)
#if ENABLED(I2C_EEPROM)
//#define MARLIN_EEPROM_SIZE 0x8000UL // 32KB
#elif ENABLED(FLASH_EEPROM_EMULATION)
//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB
//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL)
#endif
//
// Limit Switches

2
Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin mini (STM32F130VET6) board pin assignments
* MKS Robin mini (STM32F103VET6) board pin assignments
*/
#if NOT_TARGET(STM32F1, STM32F1xx)

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin (STM32F130ZET6) board pin assignments
* MKS Robin (STM32F103ZET6) board pin assignments
* https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware
*/

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin nano (STM32F130VET6) board pin assignments
* MKS Robin nano (STM32F103VET6) board pin assignments
*/
#include "env_validate.h"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin mini (STM32F130VET6) board pin assignments
* MKS Robin mini (STM32F103VET6) board pin assignments
*/
#include "env_validate.h"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin nano (STM32F130VET6) board pin assignments
* MKS Robin nano (STM32F103VET6) board pin assignments
* https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/tree/master/hardware
*/

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS Robin nano (STM32F130VET6) board pin assignments
* MKS Robin nano (STM32F103VET6) board pin assignments
*/
#if NOT_TARGET(__STM32F1__, STM32F1)

2
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View File

@ -22,7 +22,7 @@
#pragma once
/**
* ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments.
* ANYCUBIC Trigorilla Pro (STM32F103ZET6) board pin assignments.
* It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it
* https://github.com/MarlinFirmware/Marlin/issues/14655
* https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf

235
Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h Normal file
View File

@ -0,0 +1,235 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#define BOARD_INFO_NAME "ZONESTAR ZM3E2 V1.0"
#define DISABLE_DEBUG
//#define DISABLE_JTAG
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800) // 2KB
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif
//=============================================================================
// Zonestar ZM3E2 V1.0 (STM32F103RCT6) board pin assignments
//=============================================================================
// PA0 PWR_HOLD | PB0 BEEP | PC0 HEATER_0
// PA1 FAN_PIN | PB1 KILL | PC1 HEATER_BED
// PA2 TX2 | PB2 LCD_SDA | PC2 TEMP_BED
// PA3 RX2 | PB3 E1_EN | PC3 TEMP_E0
// PA4 SD_CS | PB4 Z_STOP | PC4 SD_DETECT
// PA5 SD_SCK | PB5 Z_DIR | PC5 BTN_EN2
// PA6 SD_MISO | PB6 Z_STEP | PC6 FAN1
// PA7 SD_MOSI | PB7 Z_EN | PC7 FIL_RUNOUT
// PA8 X_DIR | PB8 Y_STEP | PC8 X_EN
// PA9 LCD_RS | PB9 Y_DIR | PC9 X_STEP
// PA10 LCD_SCK | PB10 BTN_ENC | PC10 Z_MIN_PROBE_PIN
// PA11 USB_D- | PB11 BTN_EN1 | PC11 FIL_RUNOUT2
// PA12 USB_D+ | PB12 LED | PC12 E1_DIR
// PA13 MS1 | PB13 E0_EN | PC13 Y_STOP
// PA14 MS2 | PB14 E0_STEP | PC14 Y_EN
// PA15 PWM | PB15 E0_DIR | PC15 X_STOP
// PD0 NC
// PD1 NC
// PD2 E1_STEP
//=============================================================================
// EXP1 connector
// MARK I/O ZONESTAR_12864LCD ZONESTAR_12864OLED
// 10 MOSI PB1 KILL SDA
// 9 SCK PB0 BEEP SCK
// 8 TX1 PA9 DOGLCD_CS CS
// 7 RX1 PA10 DOGLCD_SCK DC
// 6 ENA PC5 BTN_EN2 KNOB_ENB
// 5 DAT PB2 DOGLCD_MOSI RESET
// 4 TX3 PB10 BTN_ENC KNOB_ENC
// 3 RX3 PB11 BTN_EN1 KNOB_ENA
// 2 +5V
// 1 GND
#define EXP1_03_PIN PB11
#define EXP1_04_PIN PB10
#define EXP1_05_PIN PB2
#define EXP1_06_PIN PC5
#define EXP1_07_PIN PA10
#define EXP1_08_PIN PA9
#define EXP1_09_PIN PB0
#define EXP1_10_PIN PB1
// AUX1 connector
// 1 +5V
// 2 TX2 PA2 UART2_TX
// 3 RX2 PA3 UART2_RX
// 4 GND
// AUX2 connector to BLTouch
// 1 +5V
// 2 SEN PC10
// 3 PWM PA15
// 4 GND
//=============================================================================
//
// Servos
//
#define SERVO0_PIN PA15
//
// Limit Switches
//
#define X_STOP_PIN PC15
#define Y_STOP_PIN PC13
#define Z_STOP_PIN PB4
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PC10 // BLTouch (3DTouch)
#endif
//
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN PC7 // E0_SW
//#define FIL_RUNOUT2_PIN PC11 // E1_SW
//
// Steppers
//
#define MS1_PIN PA13
#define MS2_PIN PA14
#define X_STEP_PIN PC9
#define X_DIR_PIN PA8
#define X_ENABLE_PIN PC8
#define Y_STEP_PIN PB8
#define Y_DIR_PIN PB9
#define Y_ENABLE_PIN PC14
#define Z_STEP_PIN PB6
#define Z_DIR_PIN PB5
#define Z_ENABLE_PIN PB7
#define E0_STEP_PIN PB14
#define E0_DIR_PIN PB15
#define E0_ENABLE_PIN PB13
#define E1_STEP_PIN PD2
#define E1_DIR_PIN PC12
#define E1_ENABLE_PIN PB3
//
// Heaters / Fans
//
#define HEATER_0_PIN PC0 // EXTRUDER 1
#define HEATER_BED_PIN PC1 // BED
#define FAN1_PIN PC6
#define FAN_PIN PA1
//
// Temperature Sensors
//
#define TEMP_BED_PIN PC2 // Analog Input
#define TEMP_0_PIN PC3 // Analog Input
#define LED_PIN PB12
//#define KILL_PIN PB1 // @EXP1
#define SUICIDE_PIN PA0
//
// SD card
//
#define ENABLE_SPI1
#define SD_DETECT_PIN PC4
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_SS_PIN PA4
//
// LCD Pins
//
#if ENABLED(ZONESTAR_12864LCD)
//================================================================================
// LCD 128x64
//================================================================================
// EXP1 connector
// MARK I/O ZONESTAR_12864LCD
// 10 MOSI PB1 KILL
// 9 SCK PB0 BEEP
// 8 TX1 PA9 LCD_PINS_RS
// 7 RX1 PA10 LCD_PINS_D4
// 6 ENA PC5 BTN_EN2
// 5 DAT PB2 LCD_PINS_ENABLE
// 4 TX3 PB10 BTN_ENC
// 3 RX3 PB11 BTN_EN1
// 2 +5V
// 1 GND
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
#define LCD_PINS_RS EXP1_08_PIN
#define LCD_PINS_ENABLE EXP1_05_PIN
#define LCD_PINS_D4 EXP1_07_PIN
//#define KILL_PIN EXP1_10_PIN
#define BEEPER_PIN EXP1_09_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_04_PIN
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(200)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306)
//================================================================================
// OLED 128x64
//================================================================================
// 10 MOSI PB1 OLED_SDA
// 9 SCK PB0 OLED_SCK
// 8 TX1 PA9 OLED_CS
// 7 RX1 PA10 OLED_DC
// 6 ENA PC5 KNOB_ENA
// 5 DAT PB2 OLED_RESET
// 4 TX3 PB10 KNOB_ENC
// 3 RX3 PB11 KNOB_ENB
#define FORCE_SOFT_SPI
#define LCDSCREEN_NAME "ZONESTAR 12864OLED"
#define LCD_PINS_RS EXP1_05_PIN // = LCD_RESET_PIN
#define LCD_PINS_DC EXP1_07_PIN // DC
#define DOGLCD_CS EXP1_08_PIN // CS
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#define DOGLCD_MOSI EXP1_10_PIN // SDA
#define DOGLCD_SCK EXP1_09_PIN // SCK
// Encoder
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_04_PIN
#endif

355
Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h Normal file
View File

@ -0,0 +1,355 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V1.0"
//#define DISABLE_DEBUG
#define DISABLE_JTAG
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800) // 2KB
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif
//#define OPTION_DUALZ_DRIVE
//#define OPTION_Z2_ENDSTOP
//#define SWITCH_EXTRUDER_SEQUENCE
//=============================================================================
// Zonestar ZM3E4 V1.0 (STM32F103VCT6) board pin assignments
//=============================================================================
// PA0 | PB0 HEAT_1 | PC0 AXU_SDA
// PA1 | PB1 FAN1 | PC1 TEMP_E1
// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0
// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED
// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT
// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0
// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP
// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN
// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN
// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR
// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN
// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN
// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP
// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN
// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST
// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS
// PD0 Z2_DIR | PE0 Y_EN
// PD1 Z2_MIN | PE1 Y_STEP
// PD2 Z1_EN | PE2 Y_DIR
// PD3 Z1_STEP | PE3 Y_MIN
// PD4 Z1_DIR | PE4 X_DIR
// PD5 WIFI_RXD | PE5 X_STEP
// PD6 WIFI_TXD | PE6 X_EN
// PD7 Z1_MIN | PE7 AXU_SCL
// PD8 X_MAX | PE8 BTN_EN1
// PD9 E3_DIR | PE9 LCD_SCK
// PD10 E3_STEP | PE10 LCD_MOSI
// PD11 E3_EN | PE11 BEEPER
// PD12 E2_DIR | PE12 LCD_EN
// PD13 E2_STEP | PE13 KILL
// PD14 E2_EN | PE14 BTN_EN2
// PD15 E1_DIR | PE15 BTN_ENC
//=============================================================================
// EXP1 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
// 10 RS PE13 KILL BTN_ENC
// 9 BP PE11 BEEP BEEP
// 8 EN PE12 DOGLCD_CS LCDRS
// 7 MOSI PE10 DOGLCD_SCK LCDE
// 6 EN1 PE8 BTN_EN1 NC
// 5 SCK PE9 DOGLCD_MOSI LCD4
// 4 ENC PE15 BTN_ENC NC
// 3 EN2 PE14 BTN_EN2 NC
// 2 +5V +5V
// 1 GND GND
#define EXP1_03_PIN PE14
#define EXP1_04_PIN PE15
#define EXP1_05_PIN PE9
#define EXP1_06_PIN PE8
#define EXP1_07_PIN PE10
#define EXP1_08_PIN PE12
#define EXP1_09_PIN PE11
#define EXP1_10_PIN PE13
// EXP2 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
// 10
// 9
// 8 RX0 PA9 UART1_RX
// 7 TX0 PA10 UART1_TX BTN_EN2
// 6 CS3 PA15
// 5 MISO3 PB4 BTN_EN1
// 4 MOSI3 PB5 KILL
// 3 SCK3 PB3
// 2 +5V +5V
// 1 GND GND
#define EXP2_03_PIN PB3
#define EXP2_04_PIN PB5
#define EXP2_05_PIN PB4
#define EXP2_06_PIN PA15
#define EXP2_07_PIN PA10
#define EXP2_08_PIN PA9
// AUX1 connector
// 1 +5V
// 2 GND
// 3 RX3 PB11 UART3_RX
// 4 TX3 PB10 UART3_TX
// 5 SCL PE7
// 6 SDA PC0
// WiFi
// 1 +5V
// 2 GND
// 3 WIFI_TXD PD5 UART2_RX
// 4 WIFI_RXD PD6 UART2_TX
// 5 WIFI_RST PC14
// 6 WIFI_CS PC15
//=============================================================================
//
// Servos
//
#define SERVO0_PIN PB9
#define SERVO2_PIN PB7
#define SERVO3_PIN PB6
//
// Limit Switches
//
#define X_MIN_PIN PC13
#define X_MAX_PIN PD8
#define Y_MIN_PIN PE3
#define Y_MAX_PIN PB14
#define Z_MIN_PIN PD7
#define Z_MAX_PIN PB13
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC8
#endif
//
// Steppers
//
#if ENABLED(COREXY)
#define X_ENABLE_PIN PE0
#define X_STEP_PIN PE1
#define X_DIR_PIN PE2
#define Y_ENABLE_PIN PE6
#define Y_STEP_PIN PE5
#define Y_DIR_PIN PE4
#else
#define X_ENABLE_PIN PE6
#define X_STEP_PIN PE5
#define X_DIR_PIN PE4
#define Y_ENABLE_PIN PE0
#define Y_STEP_PIN PE1
#define Y_DIR_PIN PE2
#endif
#define Z_ENABLE_PIN PD2
#define Z_STEP_PIN PD3
#define Z_DIR_PIN PD4
#ifdef OPTION_DUALZ_DRIVE
#define Z2_ENABLE_PIN PC11
#define Z2_STEP_PIN PC12
#define Z2_DIR_PIN PD0
#endif
#ifdef OPTION_Z2_ENDSTOP
#define Z2_MIN_PIN PD1
#define Z2_MAX_PIN PB12
#endif
#ifdef SWITCH_EXTRUDER_SEQUENCE
#define E3_ENABLE_PIN PC10
#define E3_STEP_PIN PA8
#define E3_DIR_PIN PC9
#define E2_STEP_PIN PC6
#define E2_DIR_PIN PD15
#define E2_ENABLE_PIN PC7
#define E1_STEP_PIN PD13
#define E1_DIR_PIN PD12
#define E1_ENABLE_PIN PD14
#define E0_STEP_PIN PD10
#define E0_DIR_PIN PD9
#define E0_ENABLE_PIN PD11
#else
#define E0_ENABLE_PIN PC10
#define E0_STEP_PIN PA8
#define E0_DIR_PIN PC9
#define E1_STEP_PIN PC6
#define E1_DIR_PIN PD15
#define E1_ENABLE_PIN PC7
#define E2_STEP_PIN PD13
#define E2_DIR_PIN PD12
#define E2_ENABLE_PIN PD14
#define E3_STEP_PIN PD10
#define E3_DIR_PIN PD9
#define E3_ENABLE_PIN PD11
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC2 // TH0
#define TEMP_BED_PIN PC3 // TB1
//
// Heaters / Fans
//
#define HEATER_0_PIN PC5 // HEATER0
#define HEATER_BED_PIN PA2 // HOT BED
#if ENABLED(OPTION_CHAMBER)
#define TEMP_CHAMBER_PIN PC1
#define HEATER_CHAMBER_PIN PB0
#else
#define TEMP_1_PIN PC1 // TH1
#define HEATER_1_PIN PB0 // HEATER1
#endif
#define FAN_PIN PB1 // FAN1
#define FAN1_PIN PB8 // FAN2
//
// Misc. Functions
//
//#define POWER_LOSS_PIN PB15
#define LED_PIN PA0
#define SUICIDE_PIN PA3
//
// SD card
//
#define ENABLE_SPI1
#define SD_DETECT_PIN PC4
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_SS_PIN PA4
// WiFi Functions
#define WIFI_RST PC15
#define WIFI_EN PC14
//
// LCD / Controller
//
#if ENABLED(ZONESTAR_12864LCD)
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
#define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4!
#define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4!
#define BEEPER_PIN EXP1_09_PIN
#define KILL_PIN -1 // EXP1_10_PIN
#define BTN_EN1 EXP1_06_PIN
#define BTN_EN2 EXP1_03_PIN
#define BTN_ENC EXP1_04_PIN
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864"
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
#define LCD_PINS_ENABLE EXP1_07_PIN // 6 DATA make sure for zonestar zm3e4!
#define LCD_PINS_D4 EXP1_05_PIN // 8 SCK make sure for zonestar zm3e4!
#define BEEPER_PIN EXP1_09_PIN
#define KILL_PIN EXP2_04_PIN
#define BTN_EN1 EXP2_05_PIN
#define BTN_EN2 EXP2_07_PIN
#define BTN_ENC EXP1_10_PIN
#elif ENABLED(ZONESTAR_DWIN_LCD)
// Connect to EXP2 connector
#define LCDSCREEN_NAME "ZONESTAR DWIN LCD"
#define BEEPER_PIN EXP2_06_PIN
#define KILL_PIN PC0
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_04_PIN
#define BTN_ENC EXP2_05_PIN
#endif
#if ENABLED(ZONESTAR_LCD2004_KNOB)
#define LCDSCREEN_NAME "LCD2004 KNOB"
#define LCD_PINS_RS EXP1_08_PIN
#define LCD_PINS_ENABLE EXP1_07_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_03_PIN
#define LCD_PINS_D7 EXP1_04_PIN
#define BTN_EN1 EXP2_07_PIN
#define BTN_EN2 EXP2_05_PIN
#define BTN_ENC EXP1_10_PIN
#define BEEPER_PIN EXP1_09_PIN
#define KILL_PIN EXP2_04_PIN
#elif ENABLED(ZONESTAR_LCD2004_ADCKEY)
#define LCDSCREEN_NAME "LCD2004 5KEY"
#define LCD_PINS_RS EXP1_08_PIN
#define LCD_PINS_ENABLE EXP1_07_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_03_PIN
#define LCD_PINS_D7 EXP1_04_PIN
#define ADC_KEYPAD_PIN PC0 // PIN6 of AUX1
#endif
#if HAS_MARLINUI_U8GLIB
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(250)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#endif
// Remap SERVO0 PIN for BLTouch
#if ENABLED(BLTOUCH_ON_EXP1)
// BLTouch connected to EXP1
#define BLTOUCH_PROBE_PIN EXP1_06_PIN
#define BLTOUCH_GND_PIN EXP1_04_PIN
#undef SERVO0_PIN
#define SERVO0_PIN EXP1_03_PIN
#elif ENABLED(BLTOUCH_ON_EXP2)
// BLTouch connected to EXP2
#define BLTOUCH_PROBE_PIN EXP2_03_PIN
#define BLTOUCH_GND_PIN EXP2_04_PIN
#undef SERVO0_PIN
#define SERVO0_PIN EXP2_06_PIN
#else
#define BLTOUCH_PROBE_PIN PB13
#endif

328
Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h Normal file
View File

@ -0,0 +1,328 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V2.0"
//#define DISABLE_DEBUG
#define DISABLE_JTAG
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800) // 2KB
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif
//#define OPTION_DUALZ_DRIVE
//#define OPTION_Z2_ENDSTOP
//#define OPTION_REPEAT_PRINTING
//#define SWITCH_EXTRUDER_SEQUENCE
//=============================================================================
// Zonestar ZM3E4 V2.0 (STM32F103VET6) board pin assignments
//=============================================================================
// PA0 | PB0 HEAT_1 | PC0 AUX_SDA
// PA1 | PB1 FAN1 | PC1 TEMP_E1
// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0
// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED
// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT
// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0
// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP
// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN
// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN
// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR
// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN
// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN
// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP
// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN
// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST
// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS
// PD0 Z2_DIR | PE0 Y_EN
// PD1 Z2_MIN | PE1 Y_STEP
// PD2 Z1_EN | PE2 Y_DIR
// PD3 Z1_STEP | PE3 Y_MIN
// PD4 Z1_DIR | PE4 X_DIR
// PD5 WIFI_RXD | PE5 X_STEP
// PD6 WIFI_TXD | PE6 X_EN
// PD7 Z1_MIN | PE7 AUX_SCL
// PD8 X_MAX | PE8 BTN_EN1
// PD9 E3_DIR | PE9 LCD_SCK
// PD10 E3_STEP | PE10 LCD_MOSI
// PD11 E3_EN | PE11 BEEPER
// PD12 E2_DIR | PE12 LCD_EN
// PD13 E2_STEP | PE13 KILL
// PD14 E2_EN | PE14 BTN_EN2
// PD15 E1_DIR | PE15 BTN_ENC
//=============================================================================
// EXP1 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
// 10 RS PE13 KILL BTN_ENC
// 9 BP PE11 BEEP BEEP
// 8 EN PE12 DOGLCD_CS LCDRS
// 7 MOSI PE10 DOGLCD_SCK LCDE
// 6 EN1 PE8 BTN_EN1 NC
// 5 SCK PE9 DOGLCD_MOSI LCD4
// 4 ENC PE15 BTN_ENC NC
// 3 EN2 PE14 BTN_EN2 NC
// 2 +5V
// 1 GND
#define EXP1_03_PIN PE14
#define EXP1_04_PIN PE15
#define EXP1_05_PIN PE9
#define EXP1_06_PIN PE8
#define EXP1_07_PIN PE10
#define EXP1_08_PIN PE12
#define EXP1_09_PIN PE11
#define EXP1_10_PIN PE13
// EXP2 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
// 10 SDA PC0
// 9 SCL PE7
// 8 RX1 PA9 UART1_RX
// 7 TX1 PA10 UART1_TX BTN_EN2
// 6 CS3 PA15
// 5 MISO3 PB4 BTN_EN1
// 4 MOSI3 PB5 KILL
// 3 SCK3 PB3
// 2 +5V
// 1 GND
#define EXP2_03_PIN PB3
#define EXP2_04_PIN PB5
#define EXP2_05_PIN PB4
#define EXP2_06_PIN PA15
#define EXP2_07_PIN PA10
#define EXP2_08_PIN PA9
#define EXP2_09_PIN PE7
#define EXP2_10_PIN PC0
// AUX1 connector
// 1 +5V
// 2 GND
// 3 RX3 PB11 UART3_RX
// 4 TX3 PB10 UART3_TX
// 5 SCL PE7
// 6 SDA PC0
// WiFi
// 1 +5V
// 2 GND
// 3 WIFI_TXD PD5 UART2_RX
// 4 WIFI_RXD PD6 UART2_TX
// 5 WIFI_RST PC14
// 6 WIFI_CS PC15
//=============================================================================
//
// Servos
//
#define SERVO0_PIN PB9
//#define SERVO1_PIN PB8
#define SERVO2_PIN PB7
#define SERVO3_PIN PB6
//
// Limit Switches
//
#define X_MIN_PIN PC13
#define Y_MIN_PIN PE3
#define Z_MIN_PIN PD7
#define X_MAX_PIN PD8
#define Y_MAX_PIN PB14
#define Z_MAX_PIN PB13
#ifdef OPTION_Z2_ENDSTOP
#define Z2_MIN_PIN PD1
#define Z2_MAX_PIN PB12
#endif
//
// Steppers
//
#if ENABLED(COREXY)
#define X_ENABLE_PIN PE0
#define X_STEP_PIN PE1
#define X_DIR_PIN PE2
#define Y_ENABLE_PIN PE6
#define Y_STEP_PIN PE5
#define Y_DIR_PIN PE4
#else
#define X_ENABLE_PIN PE6
#define X_STEP_PIN PE5
#define X_DIR_PIN PE4
#define Y_ENABLE_PIN PE0
#define Y_STEP_PIN PE1
#define Y_DIR_PIN PE2
#endif
#define Z_ENABLE_PIN PD2
#define Z_STEP_PIN PD3
#define Z_DIR_PIN PD4
#ifdef OPTION_DUALZ_DRIVE
#define Z2_ENABLE_PIN PC11
#define Z2_STEP_PIN PC12
#define Z2_DIR_PIN PD0
#endif
#ifdef OPTION_REPEAT_PRINTING
#define REPRINT_STOP_PIN PD8 // X_MAX_PIN
#define FORWARD_PIN PA13
#define BACK_PIN PA14
#endif
#ifdef SWITCH_EXTRUDER_SEQUENCE
#define E3_ENABLE_PIN PC10
#define E3_STEP_PIN PA8
#define E3_DIR_PIN PC9
#define E2_STEP_PIN PC6
#define E2_DIR_PIN PD15
#define E2_ENABLE_PIN PC7
#define E1_STEP_PIN PD13
#define E1_DIR_PIN PD12
#define E1_ENABLE_PIN PD14
#define E0_STEP_PIN PD10
#define E0_DIR_PIN PD9
#define E0_ENABLE_PIN PD11
#else
#define E0_ENABLE_PIN PC10
#define E0_STEP_PIN PA8
#define E0_DIR_PIN PC9
#define E1_STEP_PIN PC6
#define E1_DIR_PIN PD15
#define E1_ENABLE_PIN PC7
#define E2_STEP_PIN PD13
#define E2_DIR_PIN PD12
#define E2_ENABLE_PIN PD14
#define E3_STEP_PIN PD10
#define E3_DIR_PIN PD9
#define E3_ENABLE_PIN PD11
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC2 // TH0
//#define TEMP_1_PIN PC1 // TH1
#define TEMP_BED_PIN PC3 // TB1
//
// Heaters
//
#define HEATER_0_PIN PC5 // HEATER0
//#define HEATER_1_PIN PB0 // HEATER1
#define HEATER_BED_PIN PA2 // HOT BED
//
// Fans
//
#define FAN_PIN PB1 // FAN1
#define FAN1_PIN PB8 // FAN2
//
// Misc. Functions
//
//#define POWER_LOSS_PIN PB15
#define LED_PIN PA0
#define SUICIDE_PIN PA3
#define FIL_RUNOUT_PIN PC8
//
// SD card
//
#define ENABLE_SPI1
#define SD_DETECT_PIN PC4
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_SS_PIN PA4
// WiFi Functions
#define WIFI_RST PC15
#define WIFI_EN PC14
#if ENABLED(ZONESTAR_12864LCD)
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
#define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4!
#define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4!
#define BEEPER_PIN EXP1_09_PIN
#define KILL_PIN -1 // EXP1_10_PIN
#define BTN_EN1 EXP1_06_PIN
#define BTN_EN2 EXP1_03_PIN
#define BTN_ENC EXP1_04_PIN
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864"
#define LCD_PINS_RS EXP2_08_PIN // 7 CS make sure for zonestar zm3e4!
#define LCD_PINS_ENABLE EXP2_05_PIN // 6 DATA make sure for zonestar zm3e4!
#define LCD_PINS_D4 EXP2_07_PIN // 8 SCK make sure for zonestar zm3e4!
#define BEEPER_PIN EXP2_10_PIN
#define KILL_PIN EXP2_09_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP2_04_PIN
#elif ENABLED(ZONESTAR_DWIN_LCD)
// Connect to EXP2 connector
#define LCDSCREEN_NAME "ZONESTAR DWIN LCD"
#define BEEPER_PIN EXP2_06_PIN // PE11
#define KILL_PIN -1 // EXP1_10_PIN
#define BTN_EN2 EXP2_04_PIN // PE8
#define BTN_EN1 EXP2_03_PIN // PE14
#define BTN_ENC EXP2_05_PIN // PE15
#endif
#if HAS_MARLINUI_U8GLIB
#define BOARD_ST7920_DELAY_1 DELAY_NS(200) // Tclk_fall <200ns
#define BOARD_ST7920_DELAY_2 DELAY_NS(250) // Tdata_width >200ns
#define BOARD_ST7920_DELAY_3 DELAY_NS(200) // Tclk_rise <200ns
#endif
// Remap SERVO0 PIN for BLTouch
#if ENABLED(BLTOUCH_ON_EXP1)
// BLTouch connected to EXP1
#define BLTOUCH_PROBE_PIN EXP1_06_PIN
#define BLTOUCH_GND_PIN EXP1_04_PIN
#undef SERVO0_PIN
#define SERVO0_PIN EXP1_03_PIN
#elif ENABLED(BLTOUCH_ON_EXP2)
// BLTouch connected to EXP2
#define BLTOUCH_PROBE_PIN EXP2_03_PIN
#define BLTOUCH_GND_PIN EXP2_04_PIN
#undef SERVO0_PIN
#define SERVO0_PIN EXP2_06_PIN
#else
#define BLTOUCH_PROBE_PIN PB13 // Z1_MAX
#endif

5
Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h
View File

@ -223,13 +223,16 @@
#define BTN_ENC PH8
#endif
//
// SD card
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#define SOFTWARE_SPI
#define SDSS PA15
#define SS_PIN SDSS
#define SD_SS_PIN SDSS
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12

14
buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_256K.ld Normal file
View File

@ -0,0 +1,14 @@
MEMORY
{
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K - 4K
}
/* Provide memory region aliases for common.inc */
REGION_ALIAS("REGION_TEXT", rom);
REGION_ALIAS("REGION_DATA", ram);
REGION_ALIAS("REGION_BSS", ram);
REGION_ALIAS("REGION_RODATA", rom);
/* Let common.inc handle the real work. */
INCLUDE common.inc

14
buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_512K.ld Normal file
View File

@ -0,0 +1,14 @@
MEMORY
{
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
rom (rx) : ORIGIN = 0x08005000, LENGTH = 512K - 20K - 4K
}
/* Provide memory region aliases for common.inc */
REGION_ALIAS("REGION_TEXT", rom);
REGION_ALIAS("REGION_DATA", ram);
REGION_ALIAS("REGION_BSS", ram);
REGION_ALIAS("REGION_RODATA", rom);
/* Let common.inc handle the real work. */
INCLUDE common.inc

0
buildroot/tests/STM32F103RC_fysetc → buildroot/tests/STM32F103RC_fysetc_maple
View File

14
buildroot/tests/STM32F103VE_ZM3E4V2_USB_maple Executable file
View File

@ -0,0 +1,14 @@
#!/usr/bin/env bash
#
# Build tests for STM32F103VE_ZM3E4V2_USB
#
# exit on first failure
set -e
restore_configs
opt_set MOTHERBOARD BOARD_ZONESTAR_ZM3E4V2 SERIAL_PORT 1
exec_test $1 $2 "Zonestar ZM3E4 V2.0" "$3"
# cleanup
restore_configs

0
buildroot/tests/jgaurora_a5s_a1 → buildroot/tests/jgaurora_a5s_a1_maple
View File

0
buildroot/tests/mks_robin_lite → buildroot/tests/mks_robin_lite_maple
View File

0
buildroot/tests/mks_robin_pro → buildroot/tests/mks_robin_pro_maple
View File

43
ini/stm32f1-maple.ini
View File

@ -357,3 +357,46 @@ extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/custom_board.py
build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0 -DSS_TIMER=4
#
# Zonestar ZM3E2 V1.0 / ZM3E4 V1.0 / ZM3E4 V2.0
#
# STM32F103RC_ZM3E2_USB_maple ........... RCT6 with 256K
# STM32F103VC_ZM3E4_USB_maple ........... VCT6 with 256K
# STM32F103VE_ZM3E4V2_USB_maple ......... VET6 with 512K
#
[ZONESTAR_ZM3E_maple]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
platform_packages = tool-stm32duino
board_build.address = 0x08005000
board_build.offset = 0x5000
board_upload.maximum_size = 237568
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/custom_board.py
buildroot/share/PlatformIO/scripts/offset_and_rename.py
build_flags = ${common_stm32f1.build_flags}
-D__STM32F1__=1 -DDEBUG_LEVEL=0 -DSS_TIMER=4 -DSERIAL_USB
lib_deps = USBComposite for STM32F1@0.91
lib_ignore = Adafruit NeoPixel, SPI, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, TMCStepper
[env:STM32F103RC_ZM3E2_USB_maple]
platform = ${ZONESTAR_ZM3E_maple.platform}
extends = ZONESTAR_ZM3E_maple
board = genericSTM32F103RC
board_build.ldscript = ZONESTAR_ZM3E_256K.ld
[env:STM32F103VC_ZM3E4_USB_maple]
platform = ${ZONESTAR_ZM3E_maple.platform}
extends = ZONESTAR_ZM3E_maple
board = genericSTM32F103VC
board_build.ldscript = ZONESTAR_ZM3E_256K.ld
build_flags = ${ZONESTAR_ZM3E_maple.build_flags} -DTONE_TIMER=1 -DTONE_CHANNEL=2
[env:STM32F103VE_ZM3E4V2_USB_maple]
platform = ${ZONESTAR_ZM3E_maple.platform}
extends = ZONESTAR_ZM3E_maple
board = genericSTM32F103VE
board_build.ldscript = ZONESTAR_ZM3E_512K.ld
build_flags = ${ZONESTAR_ZM3E_maple.build_flags} -DTONE_TIMER=1 -DTONE_CHANNEL=2
board_upload.maximum_size = 499712

40
ini/stm32f1.ini
View File

@ -374,3 +374,43 @@ extra_scripts = ${stm32_variant.extra_scripts}
platform = ${common_stm32.platform}
extends = env:chitu_f103
build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
#
# Zonestar ZM3E2 V1.0 / ZM3E4 V1.0 / ZM3E4 V2.0
#
# STM32F103RC_ZM3E2_USB ........... RCT6 with 256K
# STM32F103VC_ZM3E4_USB ........... VCT6 with 256K
# STM32F103VE_ZM3E4V2_USB ......... VET6 with 512K
#
[ZONESTAR_ZM3E]
platform = ${common_stm32.platform}
extends = stm32_variant
platform_packages = ${stm_flash_drive.platform_packages}
board_upload.offset_address = 0x08005000
board_build.offset = 0x5000
board_upload.maximum_size = 237568
extra_scripts = ${stm32_variant.extra_scripts}
build_flags = ${common_stm32.build_flags}
-DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DUSE_USB_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSBD_USE_CDC_MSC
build_unflags = ${stm32_variant.build_unflags} -DUSBD_USE_CDC
[env:STM32F103RC_ZM3E2_USB]
platform = ${ZONESTAR_ZM3E.platform}
extends = ZONESTAR_ZM3E
board = genericSTM32F103RC
board_build.variant = MARLIN_F103Rx
[env:STM32F103VC_ZM3E4_USB]
platform = ${ZONESTAR_ZM3E.platform}
extends = ZONESTAR_ZM3E
board = genericSTM32F103VC
board_build.variant = MARLIN_F103Vx
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=1
[env:STM32F103VE_ZM3E4V2_USB]
platform = ${ZONESTAR_ZM3E.platform}
extends = ZONESTAR_ZM3E
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=1
board_upload.maximum_size = 499712