diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index aded988bba..1835144e84 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index aded988bba..1835144e84 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 1f3561684f..0b28a2c1e5 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 4, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 27c62cfdec..323320ce66 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 8cb51bb3c1..f583a68c55 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index aded988bba..1835144e84 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 412dda323f..64bd3e3e3c 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 53f3c84713..9d9fc69dc3 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 71e20c48bf..eb59c8cc8d 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 6e5f5c8771..a8072b4389 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 71e20c48bf..eb59c8cc8d 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index cf6fa1f30f..fc1477628f 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 128bb29df1..b35d681639 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index e2a09e10b3..5ef9925d16 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index 166587aa6b..3e81a4fdc2 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 45898905d0..dbdf78aec1 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index 0402deab0e..6656c13ec4 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index ff6c86bcb9..7d9e2e2d4d 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 45898905d0..dbdf78aec1 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 9f61140daf..ac7854978a 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index e9ad23b873..27b6f5c8b6 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 58fcca7a6e..51f1427f82 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 58fcca7a6e..51f1427f82 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index a4d4ca066b..af3f7ef306 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index cb5c291036..a5e92f937c 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 9bc73e9947..fbdabf2a32 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -631,7 +631,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { MAX_XYAXIS_ACCEL, MAX_XYAXIS_ACCEL, 100, 200 } +#define DEFAULT_MAX_ACCELERATION { MAX_XYAXIS_ACCEL, MAX_XYAXIS_ACCEL, 10, 200 } /** * Default Acceleration (change/s) change = mm/s diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 14e96f7605..fc2cafd95c 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 91363bb917..ae0d791eb9 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index f690d9335e..2b7ebec3f3 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index d3566efd10..34d97d8d83 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 6a59bd4dbf..7ef674c650 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 3ca2290440..fead01d24d 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index af6fbba0ca..7bee58d836 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 29a75957bd..f21cc63fa1 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index a02e2268aa..ea0b8c5dd8 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 7415412f4a..d3da581bd2 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 91b4eef702..09c173062b 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 32c84639d7..9076cd5afc 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -453,6 +453,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index d2cbf76eff..ae3fb55ad2 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 2ebf20b82d..91898ddfbb 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index a26c030817..29cfc66065 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 47781e1b56..884926824a 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 48d39fe08b..293a543129 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 48d39fe08b..293a543129 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 48d39fe08b..293a543129 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index afa2ac030a..018553c032 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -457,6 +457,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 1469f244d9..20f56d31c9 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -452,6 +452,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 3c225ec073..0f8df2f8bf 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 91999d98f1..ac0bf8cadc 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 001834a8db..66dcabdfc6 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 3f7d68db8d..c303b78001 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -450,6 +450,14 @@ //#define JUNCTION_DEVIATION_INCLUDE_E #endif +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 338c76ffea..3ddf5462c6 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -215,22 +215,6 @@ #define DEFAULT_KEEPALIVE_INTERVAL 2 #endif -#ifdef CPU_32_BIT - /** - * Hidden options for developer - */ - // Double stepping starts at STEP_DOUBLER_FREQUENCY + 1, quad stepping starts at STEP_DOUBLER_FREQUENCY * 2 + 1 - #ifndef STEP_DOUBLER_FREQUENCY - #if ENABLED(LIN_ADVANCE) - #define STEP_DOUBLER_FREQUENCY 60000 // Hz - #else - #define STEP_DOUBLER_FREQUENCY 80000 // Hz - #endif - #endif - // Disable double / quad stepping - //#define DISABLE_MULTI_STEPPING -#endif - /** * Provide a MAX_AUTORETRACT for older configs */ @@ -238,23 +222,6 @@ #define MAX_AUTORETRACT 99 #endif -/** - * MAX_STEP_FREQUENCY differs for TOSHIBA - */ -#if ENABLED(CONFIG_STEPPERS_TOSHIBA) - #ifdef CPU_32_BIT - #define MAX_STEP_FREQUENCY STEP_DOUBLER_FREQUENCY // Max step frequency for Toshiba Stepper Controllers, 96kHz is close to maximum for an Arduino Due - #else - #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers - #endif -#else - #ifdef CPU_32_BIT - #define MAX_STEP_FREQUENCY (STEP_DOUBLER_FREQUENCY * 4) // Max step frequency for the Due is approx. 330kHz - #else - #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) - #endif -#endif - // MS1 MS2 Stepper Driver Microstepping mode table #define MICROSTEP1 LOW,LOW #if ENABLED(HEROIC_STEPPER_DRIVERS) @@ -1346,15 +1313,6 @@ #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT #endif -// Stepper pulse duration, in cycles -#define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND) -#ifdef CPU_32_BIT - // Add additional delay for between direction signal and pulse signal of stepper - #ifndef STEPPER_DIRECTION_DELAY - #define STEPPER_DIRECTION_DELAY 0 // time in microseconds - #endif -#endif - #ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation #undef UI_VOLTAGE_LEVEL #undef RADDS_DISPLAY @@ -1486,4 +1444,132 @@ #define USE_EXECUTE_COMMANDS_IMMEDIATE #endif +// +// Estimate the amount of time the ISR will take to execute +// +#ifdef CPU_32_BIT + + // The base ISR takes 792 cycles + #define ISR_BASE_CYCLES 792UL + + // Linear advance base time is 64 cycles + #if ENABLED(LIN_ADVANCE) + #define ISR_LA_BASE_CYCLES 64UL + #else + #define ISR_LA_BASE_CYCLES 0UL + #endif + + // S curve interpolation adds 40 cycles + #if ENABLED(S_CURVE_ACCELERATION) + #define ISR_S_CURVE_CYCLES 40UL + #else + #define ISR_S_CURVE_CYCLES 0UL + #endif + + // Stepper Loop base cycles + #define ISR_LOOP_BASE_CYCLES 4UL + + // And each stepper takes 16 cycles + #define ISR_STEPPER_CYCLES 16UL + +#else + + // The base ISR takes 752 cycles + #define ISR_BASE_CYCLES 752UL + + // Linear advance base time is 32 cycles + #if ENABLED(LIN_ADVANCE) + #define ISR_LA_BASE_CYCLES 32UL + #else + #define ISR_LA_BASE_CYCLES 0UL + #endif + + // S curve interpolation adds 160 cycles + #if ENABLED(S_CURVE_ACCELERATION) + #define ISR_S_CURVE_CYCLES 160UL + #else + #define ISR_S_CURVE_CYCLES 0UL + #endif + + // Stepper Loop base cycles + #define ISR_LOOP_BASE_CYCLES 32UL + + // And each stepper takes 88 cycles + #define ISR_STEPPER_CYCLES 88UL + +#endif + +// For each stepper, we add its time +#ifdef HAS_X_STEP + #define ISR_X_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_X_STEPPER_CYCLES 0UL +#endif + +// For each stepper, we add its time +#ifdef HAS_Y_STEP + #define ISR_Y_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_Y_STEPPER_CYCLES 0UL +#endif + +// For each stepper, we add its time +#ifdef HAS_Z_STEP + #define ISR_Z_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_Z_STEPPER_CYCLES 0UL +#endif + +// E is always interpolated, even for mixing extruders +#define ISR_E_STEPPER_CYCLES ISR_STEPPER_CYCLES + +// If linear advance is disabled, then the loop also handles them +#if DISABLED(LIN_ADVANCE) && ENABLED(MIXING_EXTRUDER) + #define ISR_MIXING_STEPPER_CYCLES ((MIXING_STEPPERS) * ISR_STEPPER_CYCLES) +#else + #define ISR_MIXING_STEPPER_CYCLES 0UL +#endif + +// And the total minimum loop time is, without including the base +#define MIN_ISR_LOOP_CYCLES (ISR_X_STEPPER_CYCLES + ISR_Y_STEPPER_CYCLES + ISR_Z_STEPPER_CYCLES + ISR_E_STEPPER_CYCLES + ISR_MIXING_STEPPER_CYCLES) + +// But the user could be enforcing a minimum time, so the loop time is +#define ISR_LOOP_CYCLES (ISR_LOOP_BASE_CYCLES + ((MINIMUM_STEPPER_PULSE*2UL) > MIN_ISR_LOOP_CYCLES ? (MINIMUM_STEPPER_PULSE*2UL) : MIN_ISR_LOOP_CYCLES)) + +// If linear advance is enabled, then it is handled separately +#if ENABLED(LIN_ADVANCE) + + // Estimate the minimum LA loop time + #if ENABLED(MIXING_EXTRUDER) + #define MIN_ISR_LA_LOOP_CYCLES ((MIXING_STEPPERS) * (ISR_STEPPER_CYCLES)) + #else + #define MIN_ISR_LA_LOOP_CYCLES ISR_STEPPER_CYCLES + #endif + + // And the real loop time + #define ISR_LA_LOOP_CYCLES ((MINIMUM_STEPPER_PULSE*2UL) > MIN_ISR_LA_LOOP_CYCLES ? (MINIMUM_STEPPER_PULSE*2UL) : MIN_ISR_LA_LOOP_CYCLES) + +#else + #define ISR_LA_LOOP_CYCLES 0UL +#endif + +// Now estimate the total ISR execution time in cycles given a step per ISR multiplier +#define ISR_EXECUTION_CYCLES(rate) (((ISR_BASE_CYCLES + ISR_S_CURVE_CYCLES + (ISR_LOOP_CYCLES * rate) + ISR_LA_BASE_CYCLES + ISR_LA_LOOP_CYCLES)) / rate) + +// The maximum allowable stepping frequency when doing x128-x1 stepping (in Hz) +#define MAX_128X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(128)) +#define MAX_64X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(64)) +#define MAX_32X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(32)) +#define MAX_16X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(16)) +#define MAX_8X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(8)) +#define MAX_4X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(4)) +#define MAX_2X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(2)) +#define MAX_1X_STEP_ISR_FREQUENCY (F_CPU / ISR_EXECUTION_CYCLES(1)) + +// The minimum allowable frequency for step smoothing will be 1/10 of the maximum nominal frequency (in Hz) +#define MIN_STEP_ISR_FREQUENCY MAX_1X_STEP_ISR_FREQUENCY + +// Disable multiple steps per ISR +//#define DISABLE_MULTI_STEPPING + #endif // CONDITIONALS_POST_H diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index af16e6d55f..d1e423c3d0 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -679,9 +679,9 @@ void Planner::init() { return r11 | (uint16_t(r12) << 8) | (uint32_t(r13) << 16); } #else - // All the other 32 CPUs can easily perform the inverse using hardware division, + // All other 32-bit MPUs can easily do inverse using hardware division, // so we don't need to reduce precision or to use assembly language at all. - // This routine, for all the other archs, returns 0x100000000 / d ~= 0xFFFFFFFF / d + // This routine, for all other archs, returns 0x100000000 / d ~= 0xFFFFFFFF / d static FORCE_INLINE uint32_t get_period_inverse(const uint32_t d) { return 0xFFFFFFFF / d; } #endif #endif @@ -1646,10 +1646,16 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Bail if this is a zero-length block if (block->step_event_count < MIN_STEPS_PER_SEGMENT) return false; - // For a mixing extruder, get a magnified step_event_count for each + // For a mixing extruder, get a magnified esteps for each #if ENABLED(MIXING_EXTRUDER) for (uint8_t i = 0; i < MIXING_STEPPERS; i++) - block->mix_event_count[i] = mixing_factor[i] * block->step_event_count; + block->mix_steps[i] = mixing_factor[i] * ( + #if ENABLED(LIN_ADVANCE) + esteps + #else + block->step_event_count + #endif + ); #endif #if FAN_COUNT > 0 diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 8e5d52b098..94dda12ff9 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -108,7 +108,7 @@ typedef struct { uint8_t active_extruder; // The extruder to move (if E move) #if ENABLED(MIXING_EXTRUDER) - uint32_t mix_event_count[MIXING_STEPPERS]; // Scaled step_event_count for the mixing steppers + uint32_t mix_steps[MIXING_STEPPERS]; // Scaled steps[E_AXIS] for the mixing steppers #endif // Settings for the trapezoid generator @@ -130,7 +130,7 @@ typedef struct { // Advance extrusion #if ENABLED(LIN_ADVANCE) bool use_advance_lead; - uint16_t advance_speed, // Timer value for extruder speed offset + uint16_t advance_speed, // STEP timer value for extruder speed offset ISR max_adv_steps, // max. advance steps to get cruising speed pressure (not always nominal_speed!) final_adv_steps; // advance steps due to exit speed float e_D_ratio; diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 6f21d84aaa..bb218c22cc 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -46,6 +46,29 @@ * and Philipp Tiefenbacher. */ +/** + * __________________________ + * /| |\ _________________ ^ + * / | | \ /| |\ | + * / | | \ / | | \ s + * / | | | | | \ p + * / | | | | | \ e + * +-----+------------------------+---+--+---------------+----+ e + * | BLOCK 1 | BLOCK 2 | d + * + * time -----> + * + * The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates + * first block->accelerate_until step_events_completed, then keeps going at constant speed until + * step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. + * The slope of acceleration is calculated using v = u + at where t is the accumulated timer values of the steps so far. + */ + +/** + * Marlin uses the Bresenham algorithm. For a detailed explanation of theory and + * method see https://www.cs.helsinki.fi/group/goa/mallinnus/lines/bresenh.html + */ + /** * Jerk controlled movements planner added Apr 2018 by Eduardo José Tagle. * Equations based on Synthethos TinyG2 sources, but the fixed-point @@ -97,10 +120,14 @@ block_t* Stepper::current_block = NULL; // A pointer to the block currently bei // private: uint8_t Stepper::last_direction_bits = 0, - Stepper::last_movement_extruder = 0xFF, Stepper::axis_did_move; + bool Stepper::abort_current_block; +#if DISABLED(MIXING_EXTRUDER) + uint8_t Stepper::last_moved_extruder = 0xFF; +#endif + #if ENABLED(X_DUAL_ENDSTOPS) bool Stepper::locked_X_motor = false, Stepper::locked_X2_motor = false; #endif @@ -111,19 +138,30 @@ bool Stepper::abort_current_block; bool Stepper::locked_Z_motor = false, Stepper::locked_Z2_motor = false; #endif -/** - * Marlin uses the Bresenham algorithm. For a detailed explanation of theory and - * method see https://www.cs.helsinki.fi/group/goa/mallinnus/lines/bresenh.html - * - * The implementation used here additionally rounds up the starting seed. - */ +uint32_t Stepper::acceleration_time, Stepper::deceleration_time; +uint8_t Stepper::steps_per_isr; -int32_t Stepper::counter_X = 0, - Stepper::counter_Y = 0, - Stepper::counter_Z = 0, - Stepper::counter_E = 0; +#if DISABLED(ADAPTIVE_STEP_SMOOTHING) + constexpr +#endif + uint8_t Stepper::oversampling_factor; -uint32_t Stepper::step_events_completed = 0; // The number of step events executed in the current block +int32_t Stepper::delta_error[XYZE] = { 0 }; + +uint32_t Stepper::advance_dividend[XYZE] = { 0 }, + Stepper::advance_divisor = 0, + Stepper::step_events_completed = 0, // The number of step events executed in the current block + Stepper::accelerate_until, // The point from where we need to stop acceleration + Stepper::decelerate_after, // The point from where we need to start decelerating + Stepper::step_event_count; // The total event count for the current block + +#if ENABLED(MIXING_EXTRUDER) + int32_t Stepper::delta_error_m[MIXING_STEPPERS]; + uint32_t Stepper::advance_dividend_m[MIXING_STEPPERS], + Stepper::advance_divisor_m; +#else + int8_t Stepper::active_extruder; // Active extruder +#endif #if ENABLED(S_CURVE_ACCELERATION) int32_t __attribute__((used)) Stepper::bezier_A __asm__("bezier_A"); // A coefficient in Bézier speed curve with alias for assembler @@ -132,55 +170,38 @@ uint32_t Stepper::step_events_completed = 0; // The number of step events execut uint32_t __attribute__((used)) Stepper::bezier_F __asm__("bezier_F"); // F coefficient in Bézier speed curve with alias for assembler uint32_t __attribute__((used)) Stepper::bezier_AV __asm__("bezier_AV"); // AV coefficient in Bézier speed curve with alias for assembler #ifdef __AVR__ - bool __attribute__((used)) Stepper::A_negative __asm__("A_negative"); // If A coefficient was negative + bool __attribute__((used)) Stepper::A_negative __asm__("A_negative"); // If A coefficient was negative #endif bool Stepper::bezier_2nd_half; // =false If Bézier curve has been initialized or not #endif uint32_t Stepper::nextMainISR = 0; -bool Stepper::all_steps_done = false; #if ENABLED(LIN_ADVANCE) - uint32_t Stepper::LA_decelerate_after; + constexpr uint32_t LA_ADV_NEVER = 0xFFFFFFFF; + uint32_t Stepper::nextAdvanceISR = LA_ADV_NEVER, + Stepper::LA_isr_rate = LA_ADV_NEVER; + uint16_t Stepper::LA_current_adv_steps = 0, + Stepper::LA_final_adv_steps, + Stepper::LA_max_adv_steps; - constexpr uint32_t ADV_NEVER = 0xFFFFFFFF; - uint32_t Stepper::nextAdvanceISR = ADV_NEVER, - Stepper::eISR_Rate = ADV_NEVER; - uint16_t Stepper::current_adv_steps = 0, - Stepper::final_adv_steps, - Stepper::max_adv_steps; + int8_t Stepper::LA_steps = 0; - int8_t Stepper::e_steps = 0; - - #if E_STEPPERS > 1 - int8_t Stepper::LA_active_extruder; // Copy from current executed block. Needed because current_block is set to NULL "too early". - #else - constexpr int8_t Stepper::LA_active_extruder; - #endif - - bool Stepper::use_advance_lead; + bool Stepper::LA_use_advance_lead; #endif // LIN_ADVANCE -uint32_t Stepper::acceleration_time, Stepper::deceleration_time; - -volatile int32_t Stepper::count_position[NUM_AXIS] = { 0 }; -int8_t Stepper::count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; - -#if ENABLED(MIXING_EXTRUDER) - int32_t Stepper::counter_m[MIXING_STEPPERS]; -#endif - -uint32_t Stepper::ticks_nominal; -uint8_t Stepper::step_loops, Stepper::step_loops_nominal; - +int32_t Stepper::ticks_nominal = -1; #if DISABLED(S_CURVE_ACCELERATION) uint32_t Stepper::acc_step_rate; // needed for deceleration start point #endif volatile int32_t Stepper::endstops_trigsteps[XYZ]; +volatile int32_t Stepper::count_position[NUM_AXIS] = { 0 }; +int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 }; + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) #define DUAL_ENDSTOP_APPLY_STEP(A,V) \ if (homing_dual_axis) { \ @@ -213,7 +234,7 @@ volatile int32_t Stepper::endstops_trigsteps[XYZ]; X2_DIR_WRITE(v); \ } \ else { \ - if (current_block->active_extruder) X2_DIR_WRITE(v); else X_DIR_WRITE(v); \ + if (movement_extruder()) X2_DIR_WRITE(v); else X_DIR_WRITE(v); \ } #define X_APPLY_STEP(v,ALWAYS) \ if (extruder_duplication_enabled || ALWAYS) { \ @@ -221,7 +242,7 @@ volatile int32_t Stepper::endstops_trigsteps[XYZ]; X2_STEP_WRITE(v); \ } \ else { \ - if (current_block->active_extruder) X2_STEP_WRITE(v); else X_STEP_WRITE(v); \ + if (movement_extruder()) X2_STEP_WRITE(v); else X_STEP_WRITE(v); \ } #else #define X_APPLY_DIR(v,Q) X_DIR_WRITE(v) @@ -253,26 +274,9 @@ volatile int32_t Stepper::endstops_trigsteps[XYZ]; #endif #if DISABLED(MIXING_EXTRUDER) - #define E_APPLY_STEP(v,Q) E_STEP_WRITE(current_block->active_extruder, v) + #define E_APPLY_STEP(v,Q) E_STEP_WRITE(active_extruder, v) #endif -/** - * __________________________ - * /| |\ _________________ ^ - * / | | \ /| |\ | - * / | | \ / | | \ s - * / | | | | | \ p - * / | | | | | \ e - * +-----+------------------------+---+--+---------------+----+ e - * | BLOCK 1 | BLOCK 2 | d - * - * time -----> - * - * The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates - * first block->accelerate_until step_events_completed, then keeps going at constant speed until - * step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. - * The slope of acceleration is calculated using v = u + at where t is the accumulated timer values of the steps so far. - */ void Stepper::wake_up() { // TCNT1 = 0; ENABLE_STEPPER_DRIVER_INTERRUPT(); @@ -308,14 +312,25 @@ void Stepper::set_directions() { #endif #if DISABLED(LIN_ADVANCE) - if (motor_direction(E_AXIS)) { - REV_E_DIR(current_block->active_extruder); - count_direction[E_AXIS] = -1; - } - else { - NORM_E_DIR(current_block->active_extruder); - count_direction[E_AXIS] = 1; - } + #if ENABLED(MIXING_EXTRUDER) + if (motor_direction(E_AXIS)) { + MIXING_STEPPERS_LOOP(j) REV_E_DIR(j); + count_direction[E_AXIS] = -1; + } + else { + MIXING_STEPPERS_LOOP(j) NORM_E_DIR(j); + count_direction[E_AXIS] = 1; + } + #else + if (motor_direction(E_AXIS)) { + REV_E_DIR(active_extruder); + count_direction[E_AXIS] = -1; + } + else { + NORM_E_DIR(active_extruder); + count_direction[E_AXIS] = 1; + } + #endif #endif // !LIN_ADVANCE } @@ -1128,17 +1143,6 @@ void Stepper::set_directions() { * Stepper Driver Interrupt * * Directly pulses the stepper motors at high frequency. - * - * AVR : - * Timer 1 runs at a base frequency of 2MHz, with this ISR using OCR1A compare mode. - * - * OCR1A Frequency - * 1 2 MHz - * 50 40 KHz - * 100 20 KHz - capped max rate - * 200 10 KHz - nominal max rate - * 2000 1 KHz - sleep rate - * 4000 500 Hz - init rate */ HAL_STEP_TIMER_ISR { @@ -1156,9 +1160,11 @@ HAL_STEP_TIMER_ISR { #endif void Stepper::isr() { - - // Disable interrupts, to avoid ISR preemption while we reprogram the period - DISABLE_ISRS(); + #ifndef __AVR__ + // Disable interrupts, to avoid ISR preemption while we reprogram the period + // (AVR enters the ISR with global interrupts disabled, so no need to do it here) + DISABLE_ISRS(); + #endif // Program timer compare for the maximum period, so it does NOT // flag an interrupt while this ISR is running - So changes from small @@ -1206,7 +1212,7 @@ void Stepper::isr() { #if ENABLED(LIN_ADVANCE) // Compute the time remaining for the advance isr - if (nextAdvanceISR != ADV_NEVER) nextAdvanceISR -= interval; + if (nextAdvanceISR != LA_ADV_NEVER) nextAdvanceISR -= interval; #endif /** @@ -1248,12 +1254,17 @@ void Stepper::isr() { /** * Get the current tick value + margin * Assuming at least 6µs between calls to this ISR... - * On AVR the ISR epilogue is estimated at 40 instructions - close to 2.5µS. - * On ARM the ISR epilogue is estimated at 10 instructions - close to 200nS. - * In either case leave at least 8µS for other tasks to execute - That allows - * up to 100khz stepping rates + * On AVR the ISR epilogue+prologue is estimated at 100 instructions - Give 8µs as margin + * On ARM the ISR epilogue+prologue is estimated at 20 instructions - Give 1µs as margin */ - min_ticks = HAL_timer_get_count(STEP_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * 8); // ISR never takes more than 1ms, so this shouldn't cause trouble + min_ticks = HAL_timer_get_count(STEP_TIMER_NUM) + hal_timer_t( + #ifdef __AVR__ + 8 + #else + 1 + #endif + * (HAL_TICKS_PER_US) + ); /** * NB: If for some reason the stepper monopolizes the MPU, eventually the @@ -1299,97 +1310,34 @@ void Stepper::stepper_pulse_phase_isr() { if (!current_block) return; // Take multiple steps per interrupt (For high speed moves) - all_steps_done = false; - for (uint8_t i = step_loops; i--;) { + for (uint8_t i = steps_per_isr; i--;) { - #define _COUNTER(AXIS) counter_## AXIS #define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP #define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN - // Advance the Bresenham counter; start a pulse if the axis needs a step + // Start an active pulse, if Bresenham says so, and update position #define PULSE_START(AXIS) do{ \ - _COUNTER(AXIS) += current_block->steps[_AXIS(AXIS)]; \ - if (_COUNTER(AXIS) >= 0) { _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), 0); } \ - }while(0) - - // Advance the Bresenham counter; start a pulse if the axis needs a step - #define STEP_TICK(AXIS) do { \ - if (_COUNTER(AXIS) >= 0) { \ - _COUNTER(AXIS) -= current_block->step_event_count; \ + delta_error[_AXIS(AXIS)] += advance_dividend[_AXIS(AXIS)]; \ + if (delta_error[_AXIS(AXIS)] >= 0) { \ + _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), 0); \ count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \ } \ }while(0) - // Stop an active pulse, if any - #define PULSE_STOP(AXIS) _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), 0) + // Stop an active pulse, if any, and adjust error term + #define PULSE_STOP(AXIS) do { \ + if (delta_error[_AXIS(AXIS)] >= 0) { \ + delta_error[_AXIS(AXIS)] -= advance_divisor; \ + _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), 0); \ + } \ + }while(0) - /** - * Estimate the number of cycles that the stepper logic already takes - * up between the start and stop of the X stepper pulse. - * - * Currently this uses very modest estimates of around 5 cycles. - * True values may be derived by careful testing. - * - * Once any delay is added, the cost of the delay code itself - * may be subtracted from this value to get a more accurate delay. - * Delays under 20 cycles (1.25µs) will be very accurate, using NOPs. - * Longer delays use a loop. The resolution is 8 cycles. - */ - #if HAS_X_STEP - #define _CYCLE_APPROX_1 5 - #else - #define _CYCLE_APPROX_1 0 - #endif - #if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define _CYCLE_APPROX_2 _CYCLE_APPROX_1 + 4 - #else - #define _CYCLE_APPROX_2 _CYCLE_APPROX_1 - #endif - #if HAS_Y_STEP - #define _CYCLE_APPROX_3 _CYCLE_APPROX_2 + 5 - #else - #define _CYCLE_APPROX_3 _CYCLE_APPROX_2 - #endif - #if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define _CYCLE_APPROX_4 _CYCLE_APPROX_3 + 4 - #else - #define _CYCLE_APPROX_4 _CYCLE_APPROX_3 - #endif - #if HAS_Z_STEP - #define _CYCLE_APPROX_5 _CYCLE_APPROX_4 + 5 - #else - #define _CYCLE_APPROX_5 _CYCLE_APPROX_4 - #endif - #if ENABLED(Z_DUAL_STEPPER_DRIVERS) - #define _CYCLE_APPROX_6 _CYCLE_APPROX_5 + 4 - #else - #define _CYCLE_APPROX_6 _CYCLE_APPROX_5 - #endif - #if DISABLED(LIN_ADVANCE) - #if ENABLED(MIXING_EXTRUDER) - #define _CYCLE_APPROX_7 _CYCLE_APPROX_6 + (MIXING_STEPPERS) * 6 - #else - #define _CYCLE_APPROX_7 _CYCLE_APPROX_6 + 5 - #endif - #else - #define _CYCLE_APPROX_7 _CYCLE_APPROX_6 - #endif - - #define CYCLES_EATEN_XYZE _CYCLE_APPROX_7 - #define EXTRA_CYCLES_XYZE (STEP_PULSE_CYCLES - (CYCLES_EATEN_XYZE)) - - /** - * If a minimum pulse time was specified get the timer 0 value. - * - * On AVR the TCNT0 timer has an 8x prescaler, so it increments every 8 cycles. - * That's every 0.5µs on 16MHz and every 0.4µs on 20MHz. - * 20 counts of TCNT0 -by itself- is a good pulse delay. - * 10µs = 160 or 200 cycles. - */ - #if EXTRA_CYCLES_XYZE > 20 - hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM); + #if MINIMUM_STEPPER_PULSE > 0 + // Get the timer count and estimate the end of the pulse + hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE)); #endif + // Pulse start #if HAS_X_STEP PULSE_START(X); #endif @@ -1400,64 +1348,48 @@ void Stepper::stepper_pulse_phase_isr() { PULSE_START(Z); #endif + // Pulse E/Mixing extruders #if ENABLED(LIN_ADVANCE) - counter_E += current_block->steps[E_AXIS]; - if (counter_E >= 0) { - #if DISABLED(MIXING_EXTRUDER) - // Don't step E here for mixing extruder - motor_direction(E_AXIS) ? --e_steps : ++e_steps; - #endif + // Tick the E axis, correct error term and update position + delta_error[E_AXIS] += advance_dividend[E_AXIS]; + if (delta_error[E_AXIS] >= 0) { + count_position[E_AXIS] += count_direction[E_AXIS]; + delta_error[E_AXIS] -= advance_divisor; + + // Don't step E here - But remember the number of steps to perform + motor_direction(E_AXIS) ? --LA_steps : ++LA_steps; } - - #if ENABLED(MIXING_EXTRUDER) - // Step mixing steppers proportionally - const bool dir = motor_direction(E_AXIS); - MIXING_STEPPERS_LOOP(j) { - counter_m[j] += current_block->steps[E_AXIS]; - if (counter_m[j] >= 0) { - counter_m[j] -= current_block->mix_event_count[j]; - dir ? --e_steps[j] : ++e_steps[j]; - } - } - #endif - #else // !LIN_ADVANCE - use linear interpolation for E also - #if ENABLED(MIXING_EXTRUDER) - // Keep updating the single E axis - counter_E += current_block->steps[E_AXIS]; - // Tick the counters used for this mix + + // Tick the E axis + delta_error[E_AXIS] += advance_dividend[E_AXIS]; + if (delta_error[E_AXIS] >= 0) { + count_position[E_AXIS] += count_direction[E_AXIS]; + delta_error[E_AXIS] -= advance_divisor; + } + + // Tick the counters used for this mix in proper proportion MIXING_STEPPERS_LOOP(j) { // Step mixing steppers (proportionally) - counter_m[j] += current_block->steps[E_AXIS]; + delta_error_m[j] += advance_dividend_m[j]; // Step when the counter goes over zero - if (counter_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN); + if (delta_error_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN); } + #else // !MIXING_EXTRUDER PULSE_START(E); #endif #endif // !LIN_ADVANCE - #if HAS_X_STEP - STEP_TICK(X); - #endif - #if HAS_Y_STEP - STEP_TICK(Y); - #endif - #if HAS_Z_STEP - STEP_TICK(Z); - #endif - - STEP_TICK(E); // Always tick the single E axis - - // For minimum pulse time wait before stopping pulses - #if EXTRA_CYCLES_XYZE > 20 - while (EXTRA_CYCLES_XYZE > (uint32_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } - pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM); - #elif EXTRA_CYCLES_XYZE > 0 - DELAY_NS(EXTRA_CYCLES_XYZE * NANOSECONDS_PER_CYCLE); + #if MINIMUM_STEPPER_PULSE > 0 + // Just wait for the requested pulse time. + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + // Get the timer count and estimate the end of the pulse for the OFF phase + pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE)); #endif + // Pulse stop #if HAS_X_STEP PULSE_STOP(X); #endif @@ -1471,8 +1403,8 @@ void Stepper::stepper_pulse_phase_isr() { #if DISABLED(LIN_ADVANCE) #if ENABLED(MIXING_EXTRUDER) MIXING_STEPPERS_LOOP(j) { - if (counter_m[j] >= 0) { - counter_m[j] -= current_block->mix_event_count[j]; + if (delta_error_m[j] >= 0) { + delta_error_m[j] -= advance_divisor_m; E_STEP_WRITE(j, INVERT_E_STEP_PIN); } } @@ -1481,18 +1413,14 @@ void Stepper::stepper_pulse_phase_isr() { #endif #endif // !LIN_ADVANCE - if (++step_events_completed >= current_block->step_event_count) { - all_steps_done = true; - break; - } + // If all events done, break loop now + if (++step_events_completed >= step_event_count) break; - // For minimum pulse time wait after stopping pulses also - #if EXTRA_CYCLES_XYZE > 20 - if (i) while (EXTRA_CYCLES_XYZE > (uint32_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } - #elif EXTRA_CYCLES_XYZE > 0 - if (i) DELAY_NS(EXTRA_CYCLES_XYZE * NANOSECONDS_PER_CYCLE); + #if MINIMUM_STEPPER_PULSE + // For minimum pulse time wait after stopping pulses also + // Just wait for the requested pulse time. + if (i) while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } #endif - } // steps_loop } @@ -1508,101 +1436,119 @@ uint32_t Stepper::stepper_block_phase_isr() { // If there is a current block if (current_block) { - // Calculate new timer value - if (step_events_completed <= current_block->accelerate_until) { - - #if ENABLED(S_CURVE_ACCELERATION) - // Get the next speed to use (Jerk limited!) - uint32_t acc_step_rate = - acceleration_time < current_block->acceleration_time - ? _eval_bezier_curve(acceleration_time) - : current_block->cruise_rate; - #else - acc_step_rate = STEP_MULTIPLY(acceleration_time, current_block->acceleration_rate) + current_block->initial_rate; - NOMORE(acc_step_rate, current_block->nominal_rate); - #endif - - // step_rate to timer interval - interval = calc_timer_interval(acc_step_rate); - acceleration_time += interval; - - #if ENABLED(LIN_ADVANCE) - if (current_block->use_advance_lead) { - if (step_events_completed == step_loops || (e_steps && eISR_Rate != current_block->advance_speed)) { - nextAdvanceISR = 0; // Wake up eISR on first acceleration loop and fire ISR if final adv_rate is reached - eISR_Rate = current_block->advance_speed; - } - } - else { - eISR_Rate = ADV_NEVER; - if (e_steps) nextAdvanceISR = 0; - } - #endif // LIN_ADVANCE - } - else if (step_events_completed > current_block->decelerate_after) { - uint32_t step_rate; - - #if ENABLED(S_CURVE_ACCELERATION) - // If this is the 1st time we process the 2nd half of the trapezoid... - if (!bezier_2nd_half) { - // Initialize the Bézier speed curve - _calc_bezier_curve_coeffs(current_block->cruise_rate, current_block->final_rate, current_block->deceleration_time_inverse); - bezier_2nd_half = true; - } - - // Calculate the next speed to use - step_rate = deceleration_time < current_block->deceleration_time - ? _eval_bezier_curve(deceleration_time) - : current_block->final_rate; - #else - - // Using the old trapezoidal control - step_rate = STEP_MULTIPLY(deceleration_time, current_block->acceleration_rate); - if (step_rate < acc_step_rate) { // Still decelerating? - step_rate = acc_step_rate - step_rate; - NOLESS(step_rate, current_block->final_rate); - } - else - step_rate = current_block->final_rate; - #endif - - // step_rate to timer interval - interval = calc_timer_interval(step_rate); - deceleration_time += interval; - - #if ENABLED(LIN_ADVANCE) - if (current_block->use_advance_lead) { - if (step_events_completed <= current_block->decelerate_after + step_loops || (e_steps && eISR_Rate != current_block->advance_speed)) { - nextAdvanceISR = 0; // Wake up eISR on first deceleration loop - eISR_Rate = current_block->advance_speed; - } - } - else { - eISR_Rate = ADV_NEVER; - if (e_steps) nextAdvanceISR = 0; - } - #endif // LIN_ADVANCE - } - else { - - #if ENABLED(LIN_ADVANCE) - // If there are any esteps, fire the next advance_isr "now" - if (e_steps && eISR_Rate != current_block->advance_speed) nextAdvanceISR = 0; - #endif - - // The timer interval is just the nominal value for the nominal speed - interval = ticks_nominal; - - // Ensure this runs at the correct step rate, even if it just came off an acceleration - step_loops = step_loops_nominal; - } - // If current block is finished, reset pointer - if (all_steps_done) { + if (step_events_completed >= step_event_count) { axis_did_move = 0; current_block = NULL; planner.discard_current_block(); } + else { + // Step events not completed yet... + + // Are we in acceleration phase ? + if (step_events_completed <= accelerate_until) { // Calculate new timer value + + #if ENABLED(S_CURVE_ACCELERATION) + // Get the next speed to use (Jerk limited!) + uint32_t acc_step_rate = + acceleration_time < current_block->acceleration_time + ? _eval_bezier_curve(acceleration_time) + : current_block->cruise_rate; + #else + acc_step_rate = STEP_MULTIPLY(acceleration_time, current_block->acceleration_rate) + current_block->initial_rate; + NOMORE(acc_step_rate, current_block->nominal_rate); + #endif + + // acc_step_rate is in steps/second + + // step_rate to timer interval and steps per stepper isr + interval = calc_timer_interval(acc_step_rate, oversampling_factor, &steps_per_isr); + acceleration_time += interval; + + #if ENABLED(LIN_ADVANCE) + if (LA_use_advance_lead) { + // Wake up eISR on first acceleration loop and fire ISR if final adv_rate is reached + if (step_events_completed == steps_per_isr || (LA_steps && LA_isr_rate != current_block->advance_speed)) { + nextAdvanceISR = 0; + LA_isr_rate = current_block->advance_speed; + } + } + else { + LA_isr_rate = LA_ADV_NEVER; + if (LA_steps) nextAdvanceISR = 0; + } + #endif // LIN_ADVANCE + } + // Are we in Deceleration phase ? + else if (step_events_completed > decelerate_after) { + uint32_t step_rate; + + #if ENABLED(S_CURVE_ACCELERATION) + // If this is the 1st time we process the 2nd half of the trapezoid... + if (!bezier_2nd_half) { + // Initialize the Bézier speed curve + _calc_bezier_curve_coeffs(current_block->cruise_rate, current_block->final_rate, current_block->deceleration_time_inverse); + bezier_2nd_half = true; + // The first point starts at cruise rate. Just save evaluation of the Bézier curve + step_rate = current_block->cruise_rate; + } + else { + // Calculate the next speed to use + step_rate = deceleration_time < current_block->deceleration_time + ? _eval_bezier_curve(deceleration_time) + : current_block->final_rate; + } + #else + + // Using the old trapezoidal control + step_rate = STEP_MULTIPLY(deceleration_time, current_block->acceleration_rate); + if (step_rate < acc_step_rate) { // Still decelerating? + step_rate = acc_step_rate - step_rate; + NOLESS(step_rate, current_block->final_rate); + } + else + step_rate = current_block->final_rate; + #endif + + // step_rate is in steps/second + + // step_rate to timer interval and steps per stepper isr + interval = calc_timer_interval(step_rate, oversampling_factor, &steps_per_isr); + deceleration_time += interval; + + #if ENABLED(LIN_ADVANCE) + if (LA_use_advance_lead) { + if (step_events_completed <= decelerate_after + steps_per_isr || + (LA_steps && LA_isr_rate != current_block->advance_speed) + ) { + nextAdvanceISR = 0; // Wake up eISR on first deceleration loop + LA_isr_rate = current_block->advance_speed; + } + } + else { + LA_isr_rate = LA_ADV_NEVER; + if (LA_steps) nextAdvanceISR = 0; + } + #endif // LIN_ADVANCE + } + // We must be in cruise phase otherwise + else { + + #if ENABLED(LIN_ADVANCE) + // If there are any esteps, fire the next advance_isr "now" + if (LA_steps && LA_isr_rate != current_block->advance_speed) nextAdvanceISR = 0; + #endif + + // Calculate the ticks_nominal for this nominal speed, if not done yet + if (ticks_nominal < 0) { + // step_rate to timer interval and loops for the nominal speed + ticks_nominal = calc_timer_interval(current_block->nominal_rate, oversampling_factor, &steps_per_isr); + } + + // The timer interval is just the nominal value for the nominal speed + interval = ticks_nominal; + } + } } // If there is no current block at this point, attempt to pop one from the buffer @@ -1697,25 +1643,82 @@ uint32_t Stepper::stepper_block_phase_isr() { //if (!!current_block->steps[C_AXIS]) SBI(axis_bits, Z_HEAD); axis_did_move = axis_bits; + // No acceleration / deceleration time elapsed so far + acceleration_time = deceleration_time = 0; + + uint8_t oversampling = 0; // Assume we won't use it + #if ENABLED(ADAPTIVE_STEP_SMOOTHING) + // At this point, we must decide if we can use Stepper movement axis smoothing. + uint32_t max_rate = current_block->nominal_rate; // Get the maximum rate (maximum event speed) + while (max_rate < MIN_STEP_ISR_FREQUENCY) { + max_rate <<= 1; + if (max_rate >= MAX_1X_STEP_ISR_FREQUENCY) break; + ++oversampling; + } + oversampling_factor = oversampling; + #endif + + // Based on the oversampling factor, do the calculations + step_event_count = current_block->step_event_count << oversampling; + + // Initialize Bresenham delta errors to 1/2 + delta_error[X_AXIS] = delta_error[Y_AXIS] = delta_error[Z_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + + // Calculate Bresenham dividends + advance_dividend[X_AXIS] = current_block->steps[X_AXIS] << 1; + advance_dividend[Y_AXIS] = current_block->steps[Y_AXIS] << 1; + advance_dividend[Z_AXIS] = current_block->steps[Z_AXIS] << 1; + advance_dividend[E_AXIS] = current_block->steps[E_AXIS] << 1; + + // Calculate Bresenham divisor + advance_divisor = step_event_count << 1; + + // No step events completed so far + step_events_completed = 0; + + // Compute the acceleration and deceleration points + accelerate_until = current_block->accelerate_until << oversampling; + decelerate_after = current_block->decelerate_after << oversampling; + + #if ENABLED(MIXING_EXTRUDER) + const uint32_t e_steps = ( + #if ENABLED(LIN_ADVANCE) + current_block->steps[E_AXIS] + #else + step_event_count + #endif + ); + MIXING_STEPPERS_LOOP(i) { + delta_error_m[i] = -int32_t(e_steps); + advance_dividend_m[i] = current_block->mix_steps[i] << 1; + } + advance_divisor_m = e_steps << 1; + #else + active_extruder = current_block->active_extruder; + #endif + // Initialize the trapezoid generator from the current block. #if ENABLED(LIN_ADVANCE) - #if E_STEPPERS > 1 - if (current_block->active_extruder != last_movement_extruder) { - current_adv_steps = 0; // If the now active extruder wasn't in use during the last move, its pressure is most likely gone. - LA_active_extruder = current_block->active_extruder; - } + #if DISABLED(MIXING_EXTRUDER) && E_STEPPERS > 1 + // If the now active extruder wasn't in use during the last move, its pressure is most likely gone. + if (active_extruder != last_moved_extruder) LA_current_adv_steps = 0; #endif - if ((use_advance_lead = current_block->use_advance_lead)) { - LA_decelerate_after = current_block->decelerate_after; - final_adv_steps = current_block->final_adv_steps; - max_adv_steps = current_block->max_adv_steps; + if ((LA_use_advance_lead = current_block->use_advance_lead)) { + LA_final_adv_steps = current_block->final_adv_steps; + LA_max_adv_steps = current_block->max_adv_steps; } #endif - if (current_block->direction_bits != last_direction_bits || current_block->active_extruder != last_movement_extruder) { + if (current_block->direction_bits != last_direction_bits + #if DISABLED(MIXING_EXTRUDER) + || active_extruder != last_moved_extruder + #endif + ) { last_direction_bits = current_block->direction_bits; - last_movement_extruder = current_block->active_extruder; + #if DISABLED(MIXING_EXTRUDER) + last_moved_extruder = active_extruder; + #endif set_directions(); } @@ -1728,17 +1731,15 @@ uint32_t Stepper::stepper_block_phase_isr() { // on the next call to this ISR, will be discarded. endstops.check_possible_change(); - // No acceleration / deceleration time elapsed so far - acceleration_time = deceleration_time = 0; + #if ENABLED(Z_LATE_ENABLE) + // If delayed Z enable, enable it now. This option will severely interfere with + // timing between pulses when chaining motion between blocks, and it could lead + // to lost steps in both X and Y axis, so avoid using it unless strictly necessary!! + if (current_block->steps[Z_AXIS]) enable_Z(); + #endif - // No step events completed so far - step_events_completed = 0; - - // step_rate to timer interval for the nominal speed - ticks_nominal = calc_timer_interval(current_block->nominal_rate); - - // make a note of the number of step loops required at nominal speed - step_loops_nominal = step_loops; + // Mark the time_nominal as not calculated yet + ticks_nominal = -1; #if DISABLED(S_CURVE_ACCELERATION) // Set as deceleration point the initial rate of the block @@ -1748,24 +1749,12 @@ uint32_t Stepper::stepper_block_phase_isr() { #if ENABLED(S_CURVE_ACCELERATION) // Initialize the Bézier speed curve _calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time_inverse); - - // We have not started the 2nd half of the trapezoid + // We haven't started the 2nd half of the trapezoid bezier_2nd_half = false; #endif - // Initialize Bresenham counters to 1/2 the ceiling, with proper roundup (as explained in the article linked above) - counter_X = counter_Y = counter_Z = counter_E = -int32_t((current_block->step_event_count + 1) >> 1); - #if ENABLED(MIXING_EXTRUDER) - MIXING_STEPPERS_LOOP(i) - counter_m[i] = -int32_t((current_block->mix_event_count[i] + 1) >> 1); - #endif - - #if ENABLED(Z_LATE_ENABLE) - // If delayed Z enable, enable it now. This option will severely interfere with - // timing between pulses when chaining motion between blocks, and it could lead - // to lost steps in both X and Y axis, so avoid using it unless strictly necessary!! - if (current_block->steps[Z_AXIS]) enable_Z(); - #endif + // Calculate the initial timer interval + interval = calc_timer_interval(current_block->initial_rate, oversampling_factor, &steps_per_isr); } } @@ -1775,65 +1764,85 @@ uint32_t Stepper::stepper_block_phase_isr() { #if ENABLED(LIN_ADVANCE) - #define CYCLES_EATEN_E (E_STEPPERS * 5) - #define EXTRA_CYCLES_E (STEP_PULSE_CYCLES - (CYCLES_EATEN_E)) - - // Timer interrupt for E. e_steps is set in the main routine; + // Timer interrupt for E. LA_steps is set in the main routine uint32_t Stepper::advance_isr() { uint32_t interval; - if (use_advance_lead) { - if (step_events_completed > LA_decelerate_after && current_adv_steps > final_adv_steps) { - e_steps--; - current_adv_steps--; - interval = eISR_Rate; + if (LA_use_advance_lead) { + if (step_events_completed > decelerate_after && LA_current_adv_steps > LA_final_adv_steps) { + LA_steps--; + LA_current_adv_steps--; + interval = LA_isr_rate; } - else if (step_events_completed < LA_decelerate_after && current_adv_steps < max_adv_steps) { - //step_events_completed <= (uint32_t)current_block->accelerate_until) { - e_steps++; - current_adv_steps++; - interval = eISR_Rate; + else if (step_events_completed < decelerate_after && LA_current_adv_steps < LA_max_adv_steps) { + //step_events_completed <= (uint32_t)accelerate_until) { + LA_steps++; + LA_current_adv_steps++; + interval = LA_isr_rate; } else - interval = eISR_Rate = ADV_NEVER; + interval = LA_isr_rate = LA_ADV_NEVER; } else - interval = ADV_NEVER; + interval = LA_ADV_NEVER; - if (e_steps >= 0) - NORM_E_DIR(LA_active_extruder); - else - REV_E_DIR(LA_active_extruder); + #if ENABLED(MIXING_EXTRUDER) + if (LA_steps >= 0) + MIXING_STEPPERS_LOOP(j) NORM_E_DIR(j); + else + MIXING_STEPPERS_LOOP(j) REV_E_DIR(j); + #else + if (LA_steps >= 0) + NORM_E_DIR(active_extruder); + else + REV_E_DIR(active_extruder); + #endif // Step E stepper if we have steps - while (e_steps) { + while (LA_steps) { - #if EXTRA_CYCLES_E > 20 - hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM); + #if MINIMUM_STEPPER_PULSE + hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE)); #endif - E_STEP_WRITE(LA_active_extruder, !INVERT_E_STEP_PIN); - - // For minimum pulse time wait before stopping pulses - #if EXTRA_CYCLES_E > 20 - while (EXTRA_CYCLES_E > (hal_timer_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } - pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM); - #elif EXTRA_CYCLES_E > 0 - DELAY_NS(EXTRA_CYCLES_E * NANOSECONDS_PER_CYCLE); + #if ENABLED(MIXING_EXTRUDER) + MIXING_STEPPERS_LOOP(j) { + // Step mixing steppers (proportionally) + delta_error_m[j] += advance_dividend_m[j]; + // Step when the counter goes over zero + if (delta_error_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN); + } + #else + E_STEP_WRITE(active_extruder, !INVERT_E_STEP_PIN); #endif - e_steps < 0 ? ++e_steps : --e_steps; - - E_STEP_WRITE(LA_active_extruder, INVERT_E_STEP_PIN); - - // For minimum pulse time wait before looping - #if EXTRA_CYCLES_E > 20 - if (e_steps) while (EXTRA_CYCLES_E > (hal_timer_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } - #elif EXTRA_CYCLES_E > 0 - if (e_steps) DELAY_NS(EXTRA_CYCLES_E * NANOSECONDS_PER_CYCLE); + #if MINIMUM_STEPPER_PULSE + // Just wait for the requested pulse duration + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + // Get the timer count and estimate the end of the pulse for the OFF phase + pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t((HAL_TICKS_PER_US) * (MINIMUM_STEPPER_PULSE)); #endif - } // e_steps + LA_steps < 0 ? ++LA_steps : --LA_steps; + + #if ENABLED(MIXING_EXTRUDER) + MIXING_STEPPERS_LOOP(j) { + if (delta_error_m[j] >= 0) { + delta_error_m[j] -= advance_divisor_m; + E_STEP_WRITE(j, INVERT_E_STEP_PIN); + } + } + #else + E_STEP_WRITE(active_extruder, INVERT_E_STEP_PIN); + #endif + + #if MINIMUM_STEPPER_PULSE + // For minimum pulse time wait before looping + // Just wait for the requested pulse duration + if (LA_steps) while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + #endif + + } // LA_steps return interval; } @@ -2145,6 +2154,12 @@ void Stepper::report_positions() { #if ENABLED(BABYSTEPPING) + #if MINIMUM_STEPPER_PULSE + #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND) + #else + #define STEP_PULSE_CYCLES 0 + #endif + #if ENABLED(DELTA) #define CYCLES_EATEN_BABYSTEP (2 * 15) #else @@ -2158,8 +2173,8 @@ void Stepper::report_positions() { #define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true) #if EXTRA_CYCLES_BABYSTEP > 20 - #define _SAVE_START const hal_timer_t pulse_start = HAL_timer_get_count(STEP_TIMER_NUM) - #define _PULSE_WAIT while (EXTRA_CYCLES_BABYSTEP > (uint32_t)(HAL_timer_get_count(STEP_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } + #define _SAVE_START const hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM) + #define _PULSE_WAIT while (EXTRA_CYCLES_BABYSTEP > (uint32_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } #else #define _SAVE_START NOOP #if EXTRA_CYCLES_BABYSTEP > 0 diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h index 951847d54f..427b97f80a 100644 --- a/Marlin/src/module/stepper.h +++ b/Marlin/src/module/stepper.h @@ -76,10 +76,14 @@ class Stepper { private: static uint8_t last_direction_bits, // The next stepping-bits to be output - last_movement_extruder, // Last movement extruder, as computed when the last movement was fetched from planner axis_did_move; // Last Movement in the given direction is not null, as computed when the last movement was fetched from planner + static bool abort_current_block; // Signals to the stepper that current block should be aborted + #if DISABLED(MIXING_EXTRUDER) + static uint8_t last_moved_extruder; // Last-moved extruder, as set when the last movement was fetched from planner + #endif + #if ENABLED(X_DUAL_ENDSTOPS) static bool locked_X_motor, locked_X2_motor; #endif @@ -90,9 +94,34 @@ class Stepper { static bool locked_Z_motor, locked_Z2_motor; #endif - // Counter variables for the Bresenham line tracer - static int32_t counter_X, counter_Y, counter_Z, counter_E; - static uint32_t step_events_completed; // The number of step events executed in the current block + static uint32_t acceleration_time, deceleration_time; // time measured in Stepper Timer ticks + static uint8_t steps_per_isr; // Count of steps to perform per Stepper ISR call + + #if ENABLED(ADAPTIVE_STEP_SMOOTHING) + static uint8_t oversampling_factor; // Oversampling factor (log2(multiplier)) to increase temporal resolution of axis + #else + static constexpr uint8_t oversampling_factor = 0; + #endif + + // Delta error variables for the Bresenham line tracer + static int32_t delta_error[XYZE]; + static uint32_t advance_dividend[XYZE], + advance_divisor, + step_events_completed, // The number of step events executed in the current block + accelerate_until, // The point from where we need to stop acceleration + decelerate_after, // The point from where we need to start decelerating + step_event_count; // The total event count for the current block + + // Mixing extruder mix delta_errors for bresenham tracing + #if ENABLED(MIXING_EXTRUDER) + static int32_t delta_error_m[MIXING_STEPPERS]; + static uint32_t advance_dividend_m[MIXING_STEPPERS], + advance_divisor_m; + #define MIXING_STEPPERS_LOOP(VAR) \ + for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) + #else + static int8_t active_extruder; // Active extruder + #endif #if ENABLED(S_CURVE_ACCELERATION) static int32_t bezier_A, // A coefficient in Bézier speed curve @@ -107,33 +136,19 @@ class Stepper { #endif static uint32_t nextMainISR; // time remaining for the next Step ISR - static bool all_steps_done; // all steps done - #if ENABLED(LIN_ADVANCE) - - static uint32_t LA_decelerate_after; // Copy from current executed block. Needed because current_block is set to NULL "too early". - static uint32_t nextAdvanceISR, eISR_Rate; - static uint16_t current_adv_steps, final_adv_steps, max_adv_steps; // Copy from current executed block. Needed because current_block is set to NULL "too early". - static int8_t e_steps; - static bool use_advance_lead; - #if E_STEPPERS > 1 - static int8_t LA_active_extruder; // Copy from current executed block. Needed because current_block is set to NULL "too early". - #else - static constexpr int8_t LA_active_extruder = 0; - #endif - + static uint32_t nextAdvanceISR, LA_isr_rate; + static uint16_t LA_current_adv_steps, LA_final_adv_steps, LA_max_adv_steps; // Copy from current executed block. Needed because current_block is set to NULL "too early". + static int8_t LA_steps; + static bool LA_use_advance_lead; #endif // LIN_ADVANCE - static uint32_t acceleration_time, deceleration_time; - static uint8_t step_loops, step_loops_nominal; - - static uint32_t ticks_nominal; + static int32_t ticks_nominal; #if DISABLED(S_CURVE_ACCELERATION) static uint32_t acc_step_rate; // needed for deceleration start point #endif static volatile int32_t endstops_trigsteps[XYZ]; - static volatile int32_t endstops_stepsTotal, endstops_stepsDone; // // Positions of stepper motors, in step units @@ -145,16 +160,6 @@ class Stepper { // static int8_t count_direction[NUM_AXIS]; - // - // Mixing extruder mix counters - // - #if ENABLED(MIXING_EXTRUDER) - static int32_t counter_m[MIXING_STEPPERS]; - #define MIXING_STEPPERS_LOOP(VAR) \ - for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) \ - if (current_block->mix_event_count[VAR]) - #endif - public: // @@ -201,7 +206,15 @@ class Stepper { FORCE_INLINE static bool axis_is_moving(const AxisEnum axis) { return TEST(axis_did_move, axis); } // The extruder associated to the last movement - FORCE_INLINE static uint8_t movement_extruder() { return last_movement_extruder; } + FORCE_INLINE static uint8_t movement_extruder() { + return + #if ENABLED(MIXING_EXTRUDER) + 0 + #else + last_moved_extruder + #endif + ; + } // Handle a triggered endstop static void endstop_triggered(const AxisEnum axis); @@ -279,34 +292,42 @@ class Stepper { // Set direction bits for all steppers static void set_directions(); - // Limit the speed to 10KHz for AVR - #ifndef STEP_DOUBLER_FREQUENCY - #define STEP_DOUBLER_FREQUENCY 10000 - #endif - - FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate) { + FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate, uint8_t scale, uint8_t* loops) { uint32_t timer; - NOMORE(step_rate, uint32_t(MAX_STEP_FREQUENCY)); + // Scale the frequency, as requested by the caller + step_rate <<= scale; + uint8_t multistep = 1; #if DISABLED(DISABLE_MULTI_STEPPING) - if (step_rate > STEP_DOUBLER_FREQUENCY * 2) { // If steprate > (STEP_DOUBLER_FREQUENCY * 2) kHz >> step 4 times - step_rate >>= 2; - step_loops = 4; - } - else if (step_rate > STEP_DOUBLER_FREQUENCY) { // If steprate > STEP_DOUBLER_FREQUENCY kHz >> step 2 times + + // The stepping frequency limits for each multistepping rate + static const uint32_t limit[] PROGMEM = { + ( MAX_1X_STEP_ISR_FREQUENCY ), + ( MAX_2X_STEP_ISR_FREQUENCY >> 1), + ( MAX_4X_STEP_ISR_FREQUENCY >> 2), + ( MAX_8X_STEP_ISR_FREQUENCY >> 3), + ( MAX_16X_STEP_ISR_FREQUENCY >> 4), + ( MAX_32X_STEP_ISR_FREQUENCY >> 5), + ( MAX_64X_STEP_ISR_FREQUENCY >> 6), + (MAX_128X_STEP_ISR_FREQUENCY >> 7) + }; + + // Select the proper multistepping + uint8_t idx = 0; + while (idx < 7 && step_rate > (uint32_t)pgm_read_dword(&limit[idx])) { step_rate >>= 1; - step_loops = 2; - } - else + multistep <<= 1; + ++idx; + }; + #else + NOMORE(step_rate, uint32_t(MAX_1X_STEP_ISR_FREQUENCY)); #endif - step_loops = 1; + *loops = multistep; #ifdef CPU_32_BIT // In case of high-performance processor, it is able to calculate in real-time - const uint32_t min_time_per_step = (HAL_STEPPER_TIMER_RATE) / ((STEP_DOUBLER_FREQUENCY) * 2); timer = uint32_t(HAL_STEPPER_TIMER_RATE) / step_rate; - NOLESS(timer, min_time_per_step); // (STEP_DOUBLER_FREQUENCY * 2 kHz - this should never happen) #else constexpr uint32_t min_step_rate = F_CPU / 500000U; NOLESS(step_rate, min_step_rate); @@ -324,10 +345,8 @@ class Stepper { timer = (uint16_t)pgm_read_word_near(table_address) - (((uint16_t)pgm_read_word_near(table_address + 2) * (uint8_t)(step_rate & 0x0007)) >> 3); } - if (timer < 100) { // (20kHz - this should never happen) - timer = 100; - SERIAL_ECHOLNPAIR(MSG_STEPPER_TOO_HIGH, step_rate); - } + // (there is no need to limit the timer value here. All limits have been + // applied above, and AVR is able to keep up at 30khz Stepping ISR rate) #endif return timer; diff --git a/docs/Bresenham.md b/docs/Bresenham.md new file mode 100644 index 0000000000..59a2150964 --- /dev/null +++ b/docs/Bresenham.md @@ -0,0 +1,269 @@ +On the Bresenham algorithm as implemented by Marlin: +(Taken from (https://www.cs.helsinki.fi/group/goa/mallinnus/lines/bresenh.html) + +The basic Bresenham algorithm: + +Consider drawing a line on a raster grid where we restrict the allowable slopes of the line to the range 0 <= m <= 1 + +If we further restrict the line-drawing routine so that it always increments x as it plots, it becomes clear that, having plotted a point at (x,y), the routine has a severely limited range of options as to where it may put the next point on the line: + +- It may plot the point (x+1,y), or: +- It may plot the point (x+1,y+1). + +So, working in the first positive octant of the plane, line drawing becomes a matter of deciding between two possibilities at each step. + +We can draw a diagram of the situation which the plotting program finds itself in having plotted (x,y). + +``` + y+1 +--------------* + | / + | / + | / + | / + | y+e+m*--------+- + | /| ^ | + | / | |m | + | / | | | + | / | v | + | y+e*----|----- |m+ε + | /| | ^ | + | / | | |ε | + | / | | | | + |/ | | v v + y *----+----+----------+-- + x x+1 +``` + +In plotting (x,y) the line drawing routine will, in general, be making a compromise between what it would like to draw and what the resolution of the stepper motors actually allows it to draw. Usually the plotted point (x,y) will be in error, the actual, mathematical point on the line will not be addressable on the pixel grid. So we associate an error, ε, with each y ordinate, the real value of y should be y+ε . This error will range from -0.5 to just under +0.5. + +In moving from x to x+1 we increase the value of the true (mathematical) y-ordinate by an amount equal to the slope of the line, m. We will choose to plot (x+1,y) if the difference between this new value and y is less than 0.5 + +``` +y + ε + m < y + 0.5 +``` + +Otherwise we will plot (x+1,y+1). It should be clear that by so doing we minimize the total error between the mathematical line segment and what actually gets drawn on the display. + +The error resulting from this new point can now be written back into ε, this will allow us to repeat the whole process for the next point along the line, at x+2. + +The new value of error can adopt one of two possible values, depending on what new point is plotted. If (x+1,y) is chosen, the new value of error is given by: + +``` +ε[new] = (y + ε + m) - y +``` + +Otherwise, it is: + +``` +ε[new] = (y + ε + m) - (y + 1) +``` + +This gives an algorithm for a DDA which avoids rounding operations, instead using the error variable ε to control plotting: + +``` + ε = 0, y = y[1] + for x = x1 to x2 do + Plot point at (x,y) + if (ε + m < 0.5) + ε = ε + m + else + y = y + 1, ε = ε + m - 1 + endif + endfor +``` + +This still employs floating point values. Consider, however, what happens if we multiply across both sides of the plotting test by Δx and then by 2: + +``` + ε + m < 0.5 + ε + Δy/Δx < 0.5 +2.ε.Δx + 2.Δy < Δx +``` + +All quantities in this inequality are now integral. + +Substitute ε' for ε.Δx . The test becomes: + +``` +2.(ε' + Δy) < Δx +``` + +This gives an integer-only test for deciding which point to plot. + +The update rules for the error on each step may also be cast into ε' form. Consider the floating-point versions of the update rules: + +``` +ε = ε + m +ε = ε + m - 1 +``` + + Multiplying through by Δx yields: + +``` +ε.Δx = ε.Δx + Δy +ε.Δx = ε.Δx + Δy - Δx +``` + +Which is in ε' form: + +``` +ε' = ε' + Δy +ε' = ε' + Δy - Δx +``` + +Using this new ``error'' value, ε' with the new test and update equations gives Bresenham's integer-only line drawing algorithm: + +``` +ε' = 0, y = y[1] +for x = x1 to x2 do + Plot point at (x,y) + if (2.(ε' + Δy) < Δx) + ε' = ε' + Δy + else + y = y + 1, ε' = ε' + Δy - Δx + endif +endfor +``` + +It is a Integer only algorithm - hence efficient (fast). And the Multiplication by 2 can be implemented by left-shift. 0 <= m <= 1 + +### Oversampling Bresenham algorithm: + +Even if Bresenham does NOT lose steps at all, and also does NOT accumulate error, there is a concept i would call "time resolution" - If the quotient between major axis and minor axis (major axis means, in this context, the axis that must create more step pulses compared with the other ones, including the extruder) + +Well, if the quotient result is not an integer, then Bresenham, at some points in the movement of the major axis, must decide that it has to move the minor axis. It is done in such way that after the full major axis movement has executed, it also has executed the full movements of the minor axis. And the minor axis steps were properly distributed evenly along the major axis movement. So good so far. + +But, as said, Bresenham has "discrete" decision points: It can only decide to move (or not to move) minor axis exactly at the moment the major axis moves. And that is not the ideal point (in time) usually. + +With slow movements that are composed of a similar, but not equal number of steps in all axes, the problem worsens, as the decision points are distributed very sparsely, and there are large delays between those decision points. + +It is nearly trivial to extend Bresenham to "oversample" in that situation: Let's do it: + +Assume that we want to use Bresenham to calculate when to step (move in Y direction), but we want to do it, not for integer increments of the X axis, rather than, for fractional increments. + +Let's call 'r' the count of subdivisions we want to split an integer increment of the X axis: + +``` +m = Δy/Δx = increment of y due to the increment of x1 +``` + +Every time we move `1/r` in the X axis, then the Y axis should move `m.1/r` + +But, as stated previously, due to the resolution of the screen, there are 2 choices: + +- It may plot the point `(x+(1/r),y)`, or: +- It may plot the point `(x+(1/r),y+1)`. + +That decision must be made keeping the error as small as possible: + +``` +-0.5 < ε < 0.5 +``` + +So, the proper condition for that decision is (`m/r` is the increment of y due to the fractional `1/r` increment of `x`): + +``` +y + ε + m/r < y + 0.5 +ε + m/r < 0.5 [1] +``` + +Once we did the decision, then the error update conditions are: + +Decision A: +``` +ε[new] = y + ε + m/r - y +ε[new] = ε + m/r [2] +``` + +Decision B: +``` +ε[new] = y + ε + m/r - (y+1) +ε[new] = ε + m/r - 1 [3] +``` + +We replace m in the decision inequality [1] by its definition: + +``` +ε + m/r < 0.5 +ε + ΔY/(ΔX*r) < 0.5 +``` + +Then, we multiply it by `2.Δx.r`: + +``` +ε + ΔY/(ΔX*r) < 0.5 +2.ΔX.ε.r + 2.ΔY < ΔX.r +``` + +If we define `ε' = 2.ε.ΔX.r` then it becomes: + +``` +ε' + 2.ΔY < ΔX.r [4] +``` + +Now, for the update rules, we multiply by 2.r.ΔX + +``` +ε[new] = ε + m/r +2.r.ΔX.ε[new] = 2.r.ΔX.ε + 2.r.ΔX.ΔY/ΔX/r +2.r.ΔX.ε[new] = 2.r.ΔX.ε + 2.ΔY +ε'[new] = ε' + 2.ΔY [6] +``` + +``` +ε[new] = ε + m/r - 1 +2.r.ΔX.ε[new] = 2.r.ΔX.ε + 2.r.ΔX.ΔY/ΔX/r - 1 . 2.r.ΔX +2.r.ΔX.ε[new] = 2.r.ΔX.ε + 2.ΔY - 2.ΔX.r +ε'[new] = ε' + 2.ΔY - 2.ΔX.r [7] +``` + +All expressions, the decision inequality [4], and the update equations [5] and [6] are integer valued. There is no need for floating point arithmetic at all. + +Summarizing: + +``` +Condition equation: + + ε' + 2.ΔY < ΔX.r [4] + +Error update equations: + + ε'[new] = ε' + 2.ΔY [6] + + ε'[new] = ε' + 2.ΔY - 2.ΔX.r [7] +``` + +This can be implemented in C as: + +```cpp + class OversampledBresenham { + private: + long divisor, // stepsX + dividend, // stepsY + advanceDivisor, // advanceX + advanceDividend; // advanceY + int errorAccumulator; // Error accumulator + + public: + unsigned int ticker; + + OversampledBresenhan(const long& inDividend, const long& inDivisor, int rate) { + ticker = 0; + divisor = inDivisor; + dividend = inDividend; + advanceDivisor = divisor * 2 * rate; + advanceDividend = dividend * 2; + errorAccumulator = -divisor * rate; + } + + bool tick() { + errorAccumulator += advanceDividend; + const bool over = errorAccumulator >= 0; + if (over) { + ticker++; + errorAccumulator -= advanceDivisor; + } + return over; + } + }; +```