diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 75c86931c7..7472c39a26 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1375,10 +1375,12 @@ //#define TOUCH_UI_800x480 // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define S6_TFT_PINMAP // FYSETC S6 pin mapping + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define S6_TFT_PINMAP // FYSETC S6 pin mapping + //#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, FYSETC Cheetah and Stock boards) EXP1 pin mapping + //#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping //#define OTHER_PIN_LAYOUT // Define pins manually below #if ENABLED(OTHER_PIN_LAYOUT) diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 92c264a66f..14aa031ac6 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -361,7 +361,7 @@ #define HAS_DGUS_LCD 1 #endif -// Extensible UI serial touch screens. (See src/lcd/extensible_ui) +// Extensible UI serial touch screens. (See src/lcd/extui) #if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE) #define IS_EXTUI #define EXTENSIBLE_UI diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp index 42ba64de7c..58008d2449 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp @@ -58,7 +58,7 @@ void CLCD::FontMetrics::load(const uint8_t font) { uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const { uint16_t width = 0; const uint8_t *p = (const uint8_t *) str; - for(;;) { + for (;;) { const uint8_t val = *p++; n--; if (!val || n == 0) break; width += val < 128 ? char_widths[val] : 0; @@ -69,7 +69,7 @@ uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const { uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const { uint16_t width = 0; const uint8_t *p = (const uint8_t *) str; - for(;;) { + for (;;) { const uint8_t val = pgm_read_byte(p++); n--; if (!val || n == 0) break; width += val < 128 ? char_widths[val] : 0; @@ -79,7 +79,7 @@ uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const { /************************** HOST COMMAND FUNCTION *********************************/ -void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD +void CLCD::host_cmd(unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD if (host_command != FTDI::ACTIVE) { host_command |= 0x40; } @@ -92,7 +92,7 @@ void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Send /************************** MEMORY READ FUNCTIONS *********************************/ -void CLCD::spi_read_addr (uint32_t reg_address) { +void CLCD::spi_read_addr(uint32_t reg_address) { spi_send((reg_address >> 16) & 0x3F); // Address [21:16] spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] spi_send((reg_address >> 0) & 0xFF); // Address [7:0] @@ -100,7 +100,7 @@ void CLCD::spi_read_addr (uint32_t reg_address) { } // Write 4-Byte Address, Read Multiple Bytes -void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) { +void CLCD::mem_read_bulk(uint32_t reg_address, uint8_t *data, uint16_t len) { spi_ftdi_select(); spi_read_addr(reg_address); spi_read_bulk (data, len); @@ -108,7 +108,7 @@ void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) { } // Write 4-Byte Address, Read 1-Byte Data -uint8_t CLCD::mem_read_8 (uint32_t reg_address) { +uint8_t CLCD::mem_read_8(uint32_t reg_address) { spi_ftdi_select(); spi_read_addr(reg_address); uint8_t r_data = spi_read_8(); @@ -117,7 +117,7 @@ uint8_t CLCD::mem_read_8 (uint32_t reg_address) { } // Write 4-Byte Address, Read 2-Bytes Data -uint16_t CLCD::mem_read_16 (uint32_t reg_address) { +uint16_t CLCD::mem_read_16(uint32_t reg_address) { using namespace SPI::least_significant_byte_first; spi_ftdi_select(); spi_read_addr(reg_address); @@ -127,7 +127,7 @@ uint16_t CLCD::mem_read_16 (uint32_t reg_address) { } // Write 4-Byte Address, Read 4-Bytes Data -uint32_t CLCD::mem_read_32 (uint32_t reg_address) { +uint32_t CLCD::mem_read_32(uint32_t reg_address) { using namespace SPI::least_significant_byte_first; spi_ftdi_select(); spi_read_addr(reg_address); @@ -147,14 +147,14 @@ static inline uint8_t reverse_byte(uint8_t a) { } static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));} -void CLCD::spi_write_addr (uint32_t reg_address) { +void CLCD::spi_write_addr(uint32_t reg_address) { spi_send((reg_address >> 16) | 0x80); // Address [21:16] spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] spi_send((reg_address >> 0) & 0xFF); // Address [7:0] } // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM -void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { +void CLCD::mem_write_bulk(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { spi_ftdi_select(); spi_write_addr(reg_address); spi_write_bulk(data, len, padding); @@ -162,7 +162,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, } // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM -void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) { +void CLCD::mem_write_bulk(uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) { spi_ftdi_select(); spi_write_addr(reg_address); spi_write_bulk(str, len, padding); @@ -170,7 +170,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, } // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM -void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { +void CLCD::mem_write_pgm(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { spi_ftdi_select(); spi_write_addr(reg_address); spi_write_bulk(data, len, padding); @@ -178,7 +178,7 @@ void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, } // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images) -void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) { +void CLCD::mem_write_xbm(uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) { spi_ftdi_select(); spi_write_addr(reg_address); spi_write_bulk(data, len, padding); @@ -186,7 +186,7 @@ void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, } // Write 3-Byte Address, Write 1-Byte Data -void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) { +void CLCD::mem_write_8(uint32_t reg_address, uint8_t data) { spi_ftdi_select(); spi_write_addr(reg_address); spi_write_8(data); @@ -194,16 +194,16 @@ void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) { } // Write 3-Byte Address, Write 2-Bytes Data -void CLCD::mem_write_16 (uint32_t reg_address, uint16_t data) { +void CLCD::mem_write_16(uint32_t reg_address, uint16_t data) { using namespace SPI::least_significant_byte_first; spi_ftdi_select(); spi_write_addr(reg_address); - spi_write_32(data); + spi_write_16(data); spi_ftdi_deselect(); } // Write 3-Byte Address, Write 4-Bytes Data -void CLCD::mem_write_32 (uint32_t reg_address, uint32_t data) { +void CLCD::mem_write_32(uint32_t reg_address, uint32_t data) { using namespace SPI::least_significant_byte_first; spi_ftdi_select(); spi_write_addr(reg_address); @@ -281,7 +281,7 @@ void CLCD::CommandFifo::text(int16_t x, int16_t y, int16_t font, uint16_t optio } // This sends the a toggle command to the command preprocessor, must be followed by str() -void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) { +void CLCD::CommandFifo::toggle(int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) { struct { int32_t type = CMD_TOGGLE; int16_t x; @@ -303,7 +303,7 @@ void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, u } // This sends the a keys command to the command preprocessor, must be followed by str() -void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) { +void CLCD::CommandFifo::keys(int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) { struct { int32_t type = CMD_KEYS; int16_t x; @@ -324,7 +324,7 @@ void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_ cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms) +void CLCD::CommandFifo::clock(int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms) { struct { int32_t type = CMD_CLOCK; @@ -350,7 +350,7 @@ void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range) +void CLCD::CommandFifo::gauge(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range) { struct { int32_t type = CMD_GAUGE; @@ -376,7 +376,7 @@ void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val) +void CLCD::CommandFifo::dial(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val) { struct { int32_t type = CMD_DIAL; @@ -396,7 +396,7 @@ void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) { +void CLCD::CommandFifo::scrollbar(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) { struct { int32_t type = CMD_SCROLLBAR; int16_t x; @@ -421,7 +421,7 @@ void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, u cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { +void CLCD::CommandFifo::progress(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { struct { int32_t type = CMD_PROGRESS; int16_t x; @@ -444,7 +444,7 @@ void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, ui cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { +void CLCD::CommandFifo::slider(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { struct { int32_t type = CMD_SLIDER; int16_t x; @@ -467,7 +467,7 @@ void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) { +void CLCD::CommandFifo::gradient(int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) { struct { int32_t type = CMD_GRADIENT; int16_t x0; @@ -488,7 +488,7 @@ void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) { +void CLCD::CommandFifo::number(int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) { struct { int32_t type = CMD_NUMBER; int16_t x; @@ -507,7 +507,7 @@ void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t opt cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) { +void CLCD::CommandFifo::memzero(uint32_t ptr, uint32_t size) { struct { uint32_t type = CMD_MEMZERO; uint32_t ptr; @@ -520,7 +520,7 @@ void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) { +void CLCD::CommandFifo::memset(uint32_t ptr, uint32_t val, uint32_t size) { struct { uint32_t type = CMD_MEMSET; uint32_t ptr; @@ -535,7 +535,7 @@ void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) { +void CLCD::CommandFifo::memcpy(uint32_t dst, uint32_t src, uint32_t size) { struct { uint32_t type = CMD_MEMCPY; uint32_t dst; @@ -550,7 +550,7 @@ void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) { +void CLCD::CommandFifo::memcrc(uint32_t ptr, uint32_t num, uint32_t result) { struct { uint32_t type = CMD_MEMCRC; uint32_t ptr; @@ -565,7 +565,7 @@ void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) { +void CLCD::CommandFifo::memwrite(uint32_t ptr, uint32_t value) { struct { uint32_t type = CMD_MEMWRITE; uint32_t ptr; @@ -580,7 +580,7 @@ void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) { +void CLCD::CommandFifo::append(uint32_t ptr, uint32_t size) { struct { uint32_t type = CMD_APPEND; uint32_t ptr; @@ -593,7 +593,7 @@ void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::inflate (uint32_t ptr) { +void CLCD::CommandFifo::inflate(uint32_t ptr) { struct { uint32_t type = CMD_INFLATE; uint32_t ptr; @@ -604,7 +604,7 @@ void CLCD::CommandFifo::inflate (uint32_t ptr) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::getptr (uint32_t result) { +void CLCD::CommandFifo::getptr(uint32_t result) { struct { uint32_t type = CMD_GETPTR; uint32_t result; @@ -696,7 +696,7 @@ void CLCD::CommandFifo::loadimage(uint32_t ptr, uint32_t options) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::getprops (uint32_t ptr, uint32_t width, uint32_t height) { +void CLCD::CommandFifo::getprops(uint32_t ptr, uint32_t width, uint32_t height) { struct { uint32_t type = CMD_GETPROPS; uint32_t ptr; @@ -735,7 +735,7 @@ void CLCD::CommandFifo::rotate(int32_t a) { cmd( &cmd_data, sizeof(cmd_data) ); } -void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) { +void CLCD::CommandFifo::translate(int32_t tx, int32_t ty) { struct { uint32_t type = CMD_TRANSLATE; int32_t tx; @@ -749,7 +749,7 @@ void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) { } #if FTDI_API_LEVEL >= 810 -void CLCD::CommandFifo::setbase (uint8_t base) { +void CLCD::CommandFifo::setbase(uint8_t base) { struct { int32_t type = CMD_SETBASE; uint32_t base; @@ -855,7 +855,7 @@ void CLCD::CommandFifo::playvideo(uint32_t options) { #endif #if FTDI_API_LEVEL >= 810 -void CLCD::CommandFifo::setrotate (uint8_t rotation) { +void CLCD::CommandFifo::setrotate(uint8_t rotation) { struct { uint32_t type = CMD_SETROTATE; uint32_t rotation; @@ -868,7 +868,7 @@ void CLCD::CommandFifo::setrotate (uint8_t rotation) { #endif #if FTDI_API_LEVEL >= 810 -void CLCD::CommandFifo::romfont (uint8_t font, uint8_t romslot) { +void CLCD::CommandFifo::romfont(uint8_t font, uint8_t romslot) { struct { uint32_t type = CMD_ROMFONT; uint32_t font; @@ -1054,18 +1054,12 @@ void CLCD::init() { spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control ftdi_reset(); // Power down/up the FT8xx with the apropriate delays - if (Use_Crystal == 1) { - host_cmd(CLKEXT, 0); - } - else { - host_cmd(CLKINT, 0); - } - + host_cmd(Use_Crystal ? CLKEXT : CLKINT, 0); host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock /* read the device-id until it returns 0x7c or times out, should take less than 150ms */ uint8_t counter; - for(counter = 0; counter < 250; counter++) { + for (counter = 0; counter < 250; counter++) { uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C; if (device_id == 0x7c) { #if ENABLED(TOUCH_UI_DEBUG) @@ -1073,9 +1067,9 @@ void CLCD::init() { #endif break; } - else { + else delay(1); - } + if (counter == 249) { #if ENABLED(TOUCH_UI_DEBUG) SERIAL_ECHO_START(); @@ -1130,7 +1124,7 @@ void CLCD::init() { mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module - mem_write_16(REG::PWM_HZ, 0x00FA); + mem_write_16(REG::PWM_HZ, ENABLED(LCD_FYSETC_TFT81050) ? 0x2710 : 0x00FA); // Turning off dithering seems to help prevent horizontal line artifacts on certain colors mem_write_8(REG::DITHER, 0); diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp index 6621ea3cbf..9506eefc44 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp @@ -27,7 +27,11 @@ /********************************* SPI Functions *********************************/ namespace FTDI { + #ifndef CLCD_USE_SOFT_SPI + #ifndef __AVR__ + SPIClass EVE_SPI(CLCD_SPI_BUS); + #endif SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0); #endif @@ -57,12 +61,12 @@ namespace FTDI { SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO); #else - ::SPI.begin(); + SPI_OBJ.begin(); #endif } #ifdef CLCD_USE_SOFT_SPI - uint8_t SPI::_soft_spi_xfer (uint8_t spiOutByte) { + uint8_t SPI::_soft_spi_xfer(uint8_t spiOutByte) { uint8_t spiIndex = 0x80; uint8_t spiInByte = 0; uint8_t k; @@ -71,8 +75,8 @@ namespace FTDI { for (k = 0; k < 8; k++) { // Output and Read each bit of spiOutByte and spiInByte WRITE(CLCD_SOFT_SPI_MOSI, (spiOutByte & spiIndex) ? 1 : 0); // Output MOSI Bit WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock + if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex; // MISO changes on the falling edge of clock, so sample it before WRITE(CLCD_SOFT_SPI_SCLK, 0); - if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex; spiIndex >>= 1; } interrupts(); @@ -81,7 +85,7 @@ namespace FTDI { #endif #ifdef CLCD_USE_SOFT_SPI - void SPI::_soft_spi_send (uint8_t spiOutByte) { + void SPI::_soft_spi_send(uint8_t spiOutByte) { uint8_t k, spiIndex = 0x80; noInterrupts(); @@ -95,16 +99,12 @@ namespace FTDI { } #endif - void SPI::spi_read_bulk (void *data, uint16_t len) { + void SPI::spi_read_bulk(void *data, uint16_t len) { uint8_t* p = (uint8_t *)data; - #ifndef CLCD_USE_SOFT_SPI - ::SPI.transfer(p, len); - #else - while (len--) *p++ = spi_recv(); - #endif + while (len--) *p++ = spi_recv(); } - bool SPI::spi_verify_bulk (const void *data, uint16_t len) { + bool SPI::spi_verify_bulk(const void *data, uint16_t len) { const uint8_t* p = (const uint8_t *)data; while (len--) if (*p++ != spi_recv()) return false; return true; @@ -113,7 +113,7 @@ namespace FTDI { // CLCD SPI - Chip Select void SPI::spi_ftdi_select() { #ifndef CLCD_USE_SOFT_SPI - ::SPI.beginTransaction(spi_settings); + SPI_OBJ.beginTransaction(spi_settings); #endif WRITE(CLCD_SPI_CS, 0); #ifdef CLCD_SPI_EXTRA_CS @@ -129,25 +129,25 @@ namespace FTDI { WRITE(CLCD_SPI_EXTRA_CS, 1); #endif #ifndef CLCD_USE_SOFT_SPI - ::SPI.endTransaction(); + SPI_OBJ.endTransaction(); #endif } #ifdef SPI_FLASH_SS // Serial SPI Flash SPI - Chip Select - void SPI::spi_flash_select () { + void SPI::spi_flash_select() { #ifndef CLCD_USE_SOFT_SPI - ::SPI.beginTransaction(spi_settings); + SPI_OBJ.beginTransaction(spi_settings); #endif WRITE(SPI_FLASH_SS, 0); delayMicroseconds(1); } // Serial SPI Flash SPI - Chip Deselect - void SPI::spi_flash_deselect () { + void SPI::spi_flash_deselect() { WRITE(SPI_FLASH_SS, 1); #ifndef CLCD_USE_SOFT_SPI - ::SPI.endTransaction(); + SPI_OBJ.endTransaction(); #endif } #endif diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h index 38f0e35d5a..763f5ccb1d 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h @@ -27,6 +27,14 @@ #endif namespace FTDI { + + #if defined(__AVR__) || defined(CLCD_USE_SOFT_SPI) + #define SPI_OBJ ::SPI + #else + extern SPIClass EVE_SPI; + #define SPI_OBJ EVE_SPI + #endif + namespace SPI { #ifndef CLCD_USE_SOFT_SPI extern SPISettings spi_settings; @@ -47,7 +55,7 @@ namespace FTDI { #ifdef CLCD_USE_SOFT_SPI return _soft_spi_xfer(0x00); #else - return ::SPI.transfer(0x00); + SPI_OBJ.transfer(0x00); #endif }; @@ -55,7 +63,7 @@ namespace FTDI { #ifdef CLCD_USE_SOFT_SPI _soft_spi_send(val); #else - ::SPI.transfer(val); + SPI_OBJ.transfer(val); #endif }; diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h index a53ed95159..dcfa290230 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h @@ -30,9 +30,9 @@ class SoundList { public: static const uint8_t n; static inline const char* name(uint8_t val) { - return (const char* ) pgm_read_ptr_near(&list[val].name); + return (const char* ) pgm_read_ptr_far(&list[val].name); } static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) { - return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_near(&list[val].data); + return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_far(&list[val].data); } }; diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h index 1780c587e1..21f4769bea 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h @@ -154,3 +154,12 @@ #define CLCD_SPI_EXTRA_CS SDSS #endif #endif + +#if EITHER(E3_EXP1_PINMAP, GENERIC_EXP2_PINMAP) + #ifndef __MARLIN_FIRMWARE__ + #error "This pin mapping requires Marlin." + #endif + + #define CLCD_MOD_RESET BTN_EN1 + #define CLCD_SPI_CS LCD_PINS_RS +#endif diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp index 5ddc4b650c..48b65608f2 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp @@ -82,7 +82,7 @@ void AboutScreen::onRedraw(draw_mode_t) { ); draw_text_box(cmd, FW_VERS_POS, progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium); draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium); - draw_text_box(cmd, INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny); + draw_text_box(cmd.tag(3), INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny); cmd.font(font_medium) .colors(normal_btn) diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp index d893518275..7f179aa6f0 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp @@ -74,7 +74,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { #define EDGE_R 30 .font(font_small) .tag(0) + #if DISABLED(LCD_FYSETC_TFT81050) .text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY) + #endif .text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY) .text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY); #if DISABLED(TOUCH_UI_NO_BOOTSCREEN) @@ -93,7 +95,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { cmd.font(font_medium) #define EDGE_R 30 .colors(ui_slider) + #if DISABLED(LCD_FYSETC_TFT81050) .tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128) + #endif .tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF) .colors(ui_toggle) .tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled()) diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index be3f33ebfd..71d8813ed9 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -721,3 +721,47 @@ #define BTN_ENC 63 #endif #endif + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue." + + /** FYSECT TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK + * (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS + * (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI + * RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET + * NC | 9 10| GND GND | 9 10| 5V + * ----- ----- + * EXP2 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP2-1 ----------- EXP1-10 + * EXP2-2 ----------- EXP1-9 + * EXP2-4 ----------- EXP1-8 + * EXP2-4 ----------- EXP1-7 + * EXP2-3 ----------- EXP1-6 + * EXP2-6 ----------- EXP1-5 + * EXP2-7 ----------- EXP1-4 + * EXP2-8 ----------- EXP1-3 + * EXP2-1 ----------- EXP1-2 + * EXT1-10 ----------- EXP1-1 + * + */ + + #define BEEPER_PIN 37 + + #define BTN_EN1 31 + #define LCD_PINS_RS 33 + + #define SD_DETECT_PIN 49 + + #define KILL_PIN -1 + +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index 569e29a96a..dc19373c18 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -47,20 +47,20 @@ // // Limit Switches // -#define X_STOP_PIN PC1 // X-STOP -#define Y_STOP_PIN PC0 // Y-STOP -#define Z_STOP_PIN PC15 // Z-STOP +#define X_STOP_PIN PC1 // "X-STOP" +#define Y_STOP_PIN PC0 // "Y-STOP" +#define Z_STOP_PIN PC15 // "Z-STOP" // // Z Probe must be this pin // -#define Z_MIN_PROBE_PIN PC14 // PROBE +#define Z_MIN_PROBE_PIN PC14 // "PROBE" // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PC2 // E0-STOP + #define FIL_RUNOUT_PIN PC2 // "E0-STOP" #endif // @@ -149,9 +149,9 @@ // // Heaters / Fans // -#define HEATER_0_PIN PC8 // HE -#define HEATER_BED_PIN PC9 // HB -#define FAN_PIN PA8 // FAN0 +#define HEATER_0_PIN PC8 // "HE" +#define HEATER_BED_PIN PC9 // "HB" +#define FAN_PIN PA8 // "FAN0" // // USB connect control @@ -159,8 +159,6 @@ #define USB_CONNECT_PIN PC13 #define USB_CONNECT_INVERTING false -#define SD_DETECT_PIN PC4 - /** * _____ * 5V | 1 2 | GND @@ -182,18 +180,31 @@ #define EXPA1_10_PIN PA15 #if HAS_SPI_LCD - #define BTN_ENC EXPA1_09_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN #if ENABLED(CR10_STOCKDISPLAY) #define BEEPER_PIN EXPA1_10_PIN + #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_ENABLE EXPA1_03_PIN #define LCD_PINS_D4 EXPA1_05_PIN + #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! + + #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue." + + #define LCD_PINS_RS EXPA1_05_PIN + #define LCD_PINS_ENABLE EXPA1_09_PIN + #define LCD_PINS_D4 EXPA1_04_PIN + #define LCD_PINS_D5 EXPA1_06_PIN + #define LCD_PINS_D6 EXPA1_08_PIN + #define LCD_PINS_D7 EXPA1_10_PIN + #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! + #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) /** Creality Ender-2 display pinout @@ -207,6 +218,10 @@ * EXP1 */ + #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_A0 EXPA1_05_PIN #define DOGLCD_SCK EXPA1_10_PIN @@ -215,17 +230,71 @@ #define LCD_BACKLIGHT_PIN -1 #else - #error "Only CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP." + #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP." #endif #endif // HAS_SPI_LCD +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue." + + /** FYSECT TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET + * (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- EXP1-5 + * SP11-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- EXP1-8 + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXT1-10 ----------- EXP1-4 + * + */ + + #define CLCD_SPI_BUS 1 // SPI1 connector + + #define BEEPER_PIN EXPA1_09_PIN + + #define BTN_EN1 EXPA1_08_PIN + #define LCD_PINS_RS EXPA1_04_PIN + +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 + // // SD Support // + #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif -#define ON_BOARD_SPI_DEVICE 1 //SPI1 +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PC4 +#endif + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN EXPA1_10_PIN + #define SS_PIN EXPA1_06_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." +#endif + +#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h index 5896f38f3d..7dffe76de1 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h @@ -40,19 +40,19 @@ // // Servos // -#define SERVO0_PIN PA1 +#define SERVO0_PIN PA1 // "SERVOS" // // Limit Switches // -#define X_STOP_PIN PC0 -#define Y_STOP_PIN PC1 -#define Z_STOP_PIN PC2 +#define X_STOP_PIN PC0 // "X-STOP" +#define Y_STOP_PIN PC1 // "Y-STOP" +#define Z_STOP_PIN PC2 // "Z-STOP" // -// Z Probe must be this pins +// Z Probe must be this pin // -#define Z_MIN_PROBE_PIN PC14 +#define Z_MIN_PROBE_PIN PC14 // "PROBE" // // Filament Runout Sensor @@ -83,15 +83,15 @@ // // Temperature Sensors // -#define TEMP_0_PIN PA0 // Analog Input -#define TEMP_BED_PIN PC3 // Analog Input +#define TEMP_0_PIN PA0 // Analog Input "TH0" +#define TEMP_BED_PIN PC3 // Analog Input "TB0" // // Heaters / Fans // -#define HEATER_0_PIN PC8 // EXTRUDER -#define HEATER_BED_PIN PC9 // BED -#define FAN_PIN PA8 +#define HEATER_0_PIN PC8 // "HE" +#define HEATER_BED_PIN PC9 // "HB" +#define FAN_PIN PA8 // "FAN0" // // USB connect control @@ -99,8 +99,6 @@ #define USB_CONNECT_PIN PC13 #define USB_CONNECT_INVERTING false -#define SD_DETECT_PIN PC4 - /** * _____ * 5V | 1 2 | GND @@ -127,9 +125,9 @@ #define BEEPER_PIN EXPA1_10_PIN + #define BTN_ENC EXPA1_09_PIN #define BTN_EN1 EXPA1_08_PIN #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN #define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_ENABLE EXPA1_03_PIN @@ -159,9 +157,10 @@ * ----- * EXP1 */ + + #define BTN_ENC EXPA1_09_PIN #define BTN_EN1 EXPA1_08_PIN #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN #define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_A0 EXPA1_05_PIN @@ -171,19 +170,73 @@ #define LCD_BACKLIGHT_PIN -1 #else - - #error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BIGTREE_SKR_MINI_E3." - + #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3." #endif #endif // HAS_SPI_LCD +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue." + + /** FYSECT TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET + * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- EXP1-5 + * SPI1-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- EXP1-8 + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXP1-10 ----------- EXP1-4 + * + */ + + #define CLCD_SPI_BUS 1 // SPI1 connector + + #define BEEPER_PIN EXPA1_09_PIN + + #define BTN_EN1 EXPA1_08_PIN + #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN + +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 + // // SD Support // + #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PC4 +#endif + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN EXPA1_10_PIN + #define SS_PIN EXPA1_06_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3." +#endif + #define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card