Merge Rigidbot Configuration (PR#2579)
This commit is contained in:
Richard Wackerbarth
commit
3cfe1dce1f
@ -82,7 +82,7 @@ Here are some standard links for getting your machine calibrated:
|
||||
|
||||
// This defines the number of extruders
|
||||
// :[1,2,3,4]
|
||||
#define EXTRUDERS 2
|
||||
#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders
|
||||
|
||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
@ -144,11 +144,11 @@ Here are some standard links for getting your machine calibrated:
|
||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||
// :{ '0': "Not used", '4': "10k !! do not use for a hotend. Bad resolution at high temp. !!", '1': "100k / 4.7k - EPCOS", '51': "100k / 1k - EPCOS", '6': "100k / 4.7k EPCOS - Not as accurate as Table 1", '5': "100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '7': "100k / 4.7k Honeywell 135-104LAG-J01", '71': "100k / 4.7k Honeywell 135-104LAF-J01", '8': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9': "100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10': "100k / 4.7k RS 198-961", '11': "100k / 4.7k beta 3950 1%", '12': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13': "100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '60': "100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '55': "100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '2': "200k / 4.7k - ATC Semitec 204GT-2", '52': "200k / 1k - ATC Semitec 204GT-2", '-2': "Thermocouple + MAX6675 (only for sensor 0)", '-1': "Thermocouple + AD595", '3': "Mendel-parts / 4.7k", '1047': "Pt1000 / 4.7k", '1010': "Pt1000 / 1k (non standard)", '20': "PT100 (Ultimainboard V2.x)", '147': "Pt100 / 4.7k", '110': "Pt100 / 1k (non-standard)", '998': "Dummy 1", '999': "Dummy 2" }
|
||||
#define TEMP_SENSOR_0 5 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
|
||||
#define TEMP_SENSOR_1 5 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
|
||||
#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
|
||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||
@ -207,10 +207,16 @@ Here are some standard links for getting your machine calibrated:
|
||||
#define K1 0.95 //smoothing factor within the PID
|
||||
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
// DGlass3D/E3Dv6
|
||||
#define DEFAULT_Kp 38.59 //Base DGlass3D/E3Dv6 = 10 ; RigidBot redesigned = 16.17
|
||||
#define DEFAULT_Ki 4.21 //Base DGlass3D/E3Dv6 = 0.85 ; RigidBot redesigned = 0.85
|
||||
#define DEFAULT_Kd 88.41 //Base DGlass3D/E3Dv6 = 245 ; RigidBot redesigned = 76.55
|
||||
|
||||
// Rigidbot hotend
|
||||
#define DEFAULT_Kp 16.17
|
||||
#define DEFAULT_Ki 0.85
|
||||
#define DEFAULT_Kd 76.55
|
||||
|
||||
// Base DGlass3D/E3Dv6 hotend
|
||||
// #define DEFAULT_Kp 10
|
||||
// #define DEFAULT_Ki 0.85
|
||||
// #define DEFAULT_Kd 245
|
||||
|
||||
#endif // PIDTEMP
|
||||
|
||||
@ -298,7 +304,7 @@ Here are some standard links for getting your machine calibrated:
|
||||
// coarse Endstop Settings
|
||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
||||
#ifndef ENDSTOPPULLUPS
|
||||
#if DISABLED(ENDSTOPPULLUPS)
|
||||
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
// #define ENDSTOPPULLUP_XMAX
|
||||
// #define ENDSTOPPULLUP_YMAX
|
||||
@ -377,9 +383,9 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS 406 // RigidBot Big
|
||||
#define Y_MAX_POS 304 // RigidBot Big
|
||||
#define Z_MAX_POS 254 // RigidBot Big
|
||||
#define X_MAX_POS 254 // RigidBot regular is 254mm, RigitBot Big is 406mm
|
||||
#define Y_MAX_POS 248 // RigidBot regular is 248mm, RigitBot Big is 304mm
|
||||
#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm
|
||||
|
||||
//===========================================================================
|
||||
//========================= Filament Runout Sensor ==========================
|
||||
@ -543,11 +549,12 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
|
||||
* MOVEMENT SETTINGS
|
||||
*/
|
||||
|
||||
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
|
||||
#define HOMING_FEEDRATE {50*60, 50*60, 15*60, 0} // set the homing speeds (mm/min)
|
||||
|
||||
// default settings
|
||||
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100.06,50.06,1600,76} // default steps per unit for RigidBot with 16-teth pulleys, HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {44.3090, 22.1545, 1600, 53.5} // default steps per unit for RigidBot with standard hardware
|
||||
// default steps for 16-teth polleys {100.06,50.06,1600,76}, HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
|
||||
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec)
|
||||
#define DEFAULT_MAX_ACCELERATION {800, 800, 100, 10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
||||
|
||||
@ -592,6 +599,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
|
||||
#define EEPROM_CHITCHAT // Please keep turned on if you can.
|
||||
#endif
|
||||
|
||||
//
|
||||
// M100 Free Memory Watcher
|
||||
//
|
||||
//#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
|
||||
|
||||
// @section temperature
|
||||
|
||||
// Preheat Constants
|
||||
@ -614,8 +626,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
|
||||
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||
// See also documentation/LCDLanguageFont.md
|
||||
//#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||
#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||
|
||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||
|
||||
Loading…
Reference in New Issue
Block a user