MKS Robin new 320x240 TFT Color UI support (#18985)
This commit is contained in:
Anders Sahlman
Scott Lahteine
parent
489143f160
commit
3e2b272239
@ -38,8 +38,12 @@
|
||||
#define ILI9341_ORIENTATION_LEFT ILI9341_MADCTL_MY | ILI9341_MADCTL_MX | ILI9341_MADCTL_MV // 320x240 ; Cable on the left side
|
||||
#define ILI9341_ORIENTATION_DOWN ILI9341_MADCTL_MX // 240x320 ; Cable on the upper side
|
||||
|
||||
#define ILI9341_COLOR_BGR
|
||||
#define ILI9341_ORIENTATION ILI9341_ORIENTATION_LEFT
|
||||
#ifndef ILI9341_COLOR_RGB
|
||||
#define ILI9341_COLOR_BGR
|
||||
#endif
|
||||
#ifndef ILI9341_ORIENTATION
|
||||
#define ILI9341_ORIENTATION ILI9341_ORIENTATION_LEFT
|
||||
#endif
|
||||
#define ILI9341_MADCTL_DATA (ILI9341_ORIENTATION | TERN(ILI9341_COLOR_BGR, ILI9341_MADCTL_BGR, ILI9341_MADCTL_RGB))
|
||||
|
||||
#define ILI9341_NOP 0x00 // No Operation
|
||||
|
||||
@ -38,7 +38,9 @@
|
||||
#define ILI9488_ORIENTATION_LEFT ILI9488_MADCTL_MY | ILI9488_MADCTL_MX | ILI9488_MADCTL_MV // 480x320 ; Cable on the left side
|
||||
#define ILI9488_ORIENTATION_DOWN ILI9488_MADCTL_MX // 320x480 ; Cable on the upper side
|
||||
|
||||
#define ILI9488_COLOR_BGR
|
||||
#ifndef ILI9488_COLOR_RGB
|
||||
#define ILI9488_COLOR_BGR
|
||||
#endif
|
||||
#ifndef ILI9488_ORIENTATION
|
||||
#define ILI9488_ORIENTATION ILI9488_ORIENTATION_LEFT
|
||||
#endif
|
||||
|
||||
@ -22,34 +22,33 @@
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* MKS Robin MINI (STM32F130VET6) board pin assignments
|
||||
* MKS Robin mini (STM32F130VET6) board pin assignments
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1__
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "MKS Robin mini supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||
#error "MKS Robin mini only supports 1 hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "MKS Robin mini"
|
||||
#define BOARD_INFO_NAME "MKS Robin Mini"
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
// 2K in a AT24C16N
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Note: MKS Robin mini board is using SPI2 interface.
|
||||
//
|
||||
#define SPI_MODULE 2
|
||||
#define ENABLE_SPI2
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
@ -82,6 +81,15 @@
|
||||
#define E0_STEP_PIN PD6
|
||||
#define E0_DIR_PIN PD3
|
||||
|
||||
|
||||
// Motor current PWM pins
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN PA6
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN PA7
|
||||
#define MOTOR_CURRENT_PWM_E_PIN PB0
|
||||
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
||||
#ifndef DEFAULT_PWM_MOTOR_CURRENT
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
|
||||
#endif
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
@ -91,64 +99,102 @@
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC3 // HEATER1
|
||||
#define HEATER_BED_PIN PA0 // HOT BED
|
||||
#define HEATER_0_PIN PC3
|
||||
#define HEATER_BED_PIN PA0
|
||||
|
||||
#define FAN_PIN PB1 // FAN
|
||||
|
||||
//
|
||||
// Thermocouples
|
||||
//
|
||||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
||||
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define POWER_LOSS_PIN PA2 // PW_DET
|
||||
#define PS_ON_PIN PA3 // PW_OFF
|
||||
|
||||
//#define LED_PIN PB2
|
||||
#define SERVO0_PIN PA8 // Enable BLTOUCH support on IO0 (WIFI connector)
|
||||
|
||||
#define MT_DET_1_PIN PA4
|
||||
#define MT_DET_PIN_INVERTING false
|
||||
|
||||
#define WIFI_IO0_PIN PC13
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#define SDIO_SUPPORT
|
||||
#define SDIO_CLOCK 4500000 // 4.5 MHz
|
||||
#define SD_DETECT_PIN PD12
|
||||
#define ONBOARD_SD_CS_PIN PC11
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#define BEEPER_PIN PC5
|
||||
#define SD_DETECT_PIN PD12
|
||||
|
||||
/**
|
||||
* Note: MKS Robin TFT screens use various TFT controllers.
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN'
|
||||
* to let the bootloader init the screen.
|
||||
*/
|
||||
#define XPT2046_X_CALIBRATION 12033
|
||||
#define XPT2046_Y_CALIBRATION -9047
|
||||
#define XPT2046_X_OFFSET -30
|
||||
#define XPT2046_Y_OFFSET 254
|
||||
|
||||
#if ENABLED(FSMC_GRAPHICAL_TFT)
|
||||
|
||||
#define FSMC_CS_PIN PD7 // NE4
|
||||
#define FSMC_RS_PIN PD11 // A0
|
||||
|
||||
#define LCD_RESET_PIN PC6
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define LCD_RESET_PIN PC6 // FSMC_RST
|
||||
#define LCD_BACKLIGHT_PIN PD13
|
||||
|
||||
#if NEED_TOUCH_PINS
|
||||
#define TOUCH_CS_PIN PC2
|
||||
#define TOUCH_SCK_PIN PB13
|
||||
#define TOUCH_MOSI_PIN PB15
|
||||
#define TOUCH_MISO_PIN PB14
|
||||
#define TOUCH_CS_PIN PC2 // SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
|
||||
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
|
||||
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
|
||||
#endif
|
||||
|
||||
#elif ENABLED(TFT_320x240) //TFT32/28
|
||||
|
||||
#define TFT_RESET_PIN PC6
|
||||
#define TFT_BACKLIGHT_PIN PD13
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_CS_PIN PD7
|
||||
#define FSMC_RS_PIN PD11
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define TOUCH_CS_PIN PC2 // SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
|
||||
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
|
||||
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
|
||||
|
||||
#define TFT_DRIVER ILI9341
|
||||
#define TFT_BUFFER_SIZE 14400
|
||||
|
||||
// YV for normal screen mounting
|
||||
#define ILI9341_ORIENTATION ILI9341_MADCTL_MY | ILI9341_MADCTL_MV
|
||||
// XV for 180° rotated screen mounting
|
||||
//#define ILI9341_ORIENTATION ILI9341_MADCTL_MX | ILI9341_MADCTL_MV
|
||||
|
||||
#define ILI9341_COLOR_RGB
|
||||
#endif
|
||||
|
||||
// Motor current PWM pins
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN PA6
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN PA7
|
||||
#define MOTOR_CURRENT_PWM_E_PIN PB0
|
||||
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 1030, 1030, 1030 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically.
|
||||
|
||||
// This is a kind of workaround in case native marlin "digipot" interface won't work.
|
||||
// Required to enable related code in STM32F1/HAL.cpp
|
||||
//#ifndef MKS_ROBIN_MINI_VREF_PWM
|
||||
// #define MKS_ROBIN_MINI_VREF_PWM
|
||||
//#endif
|
||||
|
||||
//#define VREF_XY_PIN PA6
|
||||
//#define VREF_Z_PIN PA7
|
||||
//#define VREF_E1_PIN PB0
|
||||
#define HAS_SPI_FLASH 1
|
||||
#define SPI_FLASH_SIZE 0x1000000 // 16MB
|
||||
#if HAS_SPI_FLASH
|
||||
#define W25QXX_CS_PIN PB12 // Flash chip-select
|
||||
#define W25QXX_MOSI_PIN PB15
|
||||
#define W25QXX_MISO_PIN PB14
|
||||
#define W25QXX_SCK_PIN PB13
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user