From 424b9a83cd98e33365b6048feb005c760ced13ed Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 22 Feb 2018 03:00:47 -0600 Subject: [PATCH] Slovak language update From @rmoravcik at #9760 --- Marlin/src/lcd/language/language_sk_utf8.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/Marlin/src/lcd/language/language_sk_utf8.h b/Marlin/src/lcd/language/language_sk_utf8.h index 601e30d3a6..97a36f9ebe 100644 --- a/Marlin/src/lcd/language/language_sk_utf8.h +++ b/Marlin/src/lcd/language/language_sk_utf8.h @@ -80,6 +80,8 @@ #define MSG_MOVE_AXIS _UxGT("Posunúť osy") #define MSG_BED_LEVELING _UxGT("Vyrovnať podložku") #define MSG_LEVEL_BED _UxGT("Vyrovnať podložku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnať rohy") +#define MSG_NEXT_CORNER _UxGT("Ďalší roh") #define MSG_EDITING_STOPPED _UxGT("Koniec úprav siete") #define MSG_UBL_DOING_G29 _UxGT("Vykonávam G29") @@ -97,6 +99,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Úprava sieťe bodov") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upraviť vlastnú sieť") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladiť sieť bodov") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Koniec úprav siete") @@ -136,11 +139,34 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Pamaťový slot") #define MSG_UBL_LOAD_MESH _UxGT("Načítať sieť bodov") #define MSG_UBL_SAVE_MESH _UxGT("Uložiť sieť bodov") +#define MSG_MESH_LOADED _UxGT("Sieť %i načítaná") +#define MSG_MESH_SAVED _UxGT("Sieť %i uložená") +#define MSG_NO_STORAGE _UxGT("Nedostatok miesta") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložiť UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnoviť UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Koniec Z-Offsetu") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupne") +#define MSG_LED_CONTROL _UxGT("Nastavenie LED") +#define MSG_LEDS_ON _UxGT("Zapnúť svetlo") +#define MSG_LEDS_OFF _UxGT("Vypnúť svetlo") +#define MSG_LED_PRESETS _UxGT("Prednastavené farby") +#define MSG_SET_LEDS_RED _UxGT("Červená") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranžová") +#define MSG_SET_LEDS_YELLOW _UxGT("Žltá") +#define MSG_SET_LEDS_GREEN _UxGT("Zelená") +#define MSG_SET_LEDS_BLUE _UxGT("Modrá") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialová") +#define MSG_SET_LEDS_WHITE _UxGT("Biela") +#define MSG_SET_LEDS_DEFAULT _UxGT("Obnoviť nastavenie") +#define MSG_CUSTOM_LEDS _UxGT("Vlastná farba") +#define MSG_INTENSITY_R _UxGT("Inten. červenej") +#define MSG_INTENSITY_G _UxGT("Inten. zelenej") +#define MSG_INTENSITY_B _UxGT("Inten. modrej") +#define MSG_INTENSITY_W _UxGT("Inten. bielej") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + #define MSG_USER_MENU _UxGT("Vlastné príkazy") #define MSG_MOVING _UxGT("Posun...") #define MSG_FREE_XY _UxGT("Uvolniť XY") @@ -156,6 +182,7 @@ #define MSG_NOZZLE _UxGT("Tryska") #define MSG_BED _UxGT("Podložka") #define MSG_FAN_SPEED _UxGT("Rýchlosť vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rýchlosť ex. vent.") #define MSG_FLOW _UxGT("Prietok") #define MSG_CONTROL _UxGT("Ovládanie") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") @@ -210,6 +237,8 @@ #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Priem.") +#define MSG_FILAMENT_UNLOAD _UxGT("Vysunúť mm") +#define MSG_FILAMENT_LOAD _UxGT("Zaviesť mm") #define MSG_ADVANCE_K _UxGT("K pro posun") #define MSG_CONTRAST _UxGT("Kontrast LCD") #define MSG_STORE_EEPROM _UxGT("Uložiť nastavenie") @@ -240,11 +269,17 @@ #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Vymeniť filament") +#define MSG_FILAMENTLOAD _UxGT("Zaviesť filament") +#define MSG_FILAMENTUNLOAD _UxGT("Vysunúť filament") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunúť všetko") + #define MSG_INIT_SDCARD _UxGT("Načítať SD kartu") #define MSG_CNG_SDCARD _UxGT("Vymeniť SD kartu") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor skosenia") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") @@ -279,8 +314,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovať Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovať Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovať Stred") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastavenia") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrácia") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Výška") +#define MSG_DELTA_RADIUS _UxGT("Polomer") #define MSG_INFO_MENU _UxGT("O tlačiarni") #define MSG_INFO_PRINTER_MENU _UxGT("Info o tlačiarni") #define MSG_3POINT_LEVELING _UxGT("3-bodové rovnanie") @@ -319,9 +358,15 @@ #define MSG_DAC_EEPROM_WRITE _UxGT("Uložiť do EEPROM") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PAUZA TLAČE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENIE FILAMENTU") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTIE FILAMENTU") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽN. POKRAČ.:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačiť viacej") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnoviť tlač") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkovanie zlyhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrácia zlyhala") +#define MSG_M600_TOO_COLD _UxGT("M600: Príliž studený") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed @@ -341,6 +386,8 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čakajte prosím") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedenie") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Čakajte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačenie") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čakajte prosím") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračovanie") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tlače") @@ -351,6 +398,7 @@ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, kliknite") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Ohrev...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádzanie...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačovanie...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračovanie...") #endif // LCD_HEIGHT < 4