MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

format

Browse Source
This commit is contained in:
Bernhard Kubicek 2011-11-20 09:03:42 +01:00
parent 827cd72703
commit 4258841241
1 changed files with 26 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
README.md
View File

@ -1,8 +1,11 @@
WARNING: THIS IN A PROCESS OF HEAVY OVERWORKING.
WARNING:
--------
THIS IN A PROCESS OF HEAVY OVERWORKING.
DO NOT USE THIS ON YOUR MACHINE UNTIL FURTHER NOTICE!!! DO NOT USE THIS ON YOUR MACHINE UNTIL FURTHER NOTICE!!!
=========================================== Quick Information
===================
This RepRap firmware is a mashup between <a href="https://github.com/kliment/Sprinter">Sprinter</a>, <a href="https://github.com/simen/grbl/tree">grbl</a> and many original parts. This RepRap firmware is a mashup between <a href="https://github.com/kliment/Sprinter">Sprinter</a>, <a href="https://github.com/simen/grbl/tree">grbl</a> and many original parts.
Derived from Sprinter and Grbl by Erik van der Zalm. Derived from Sprinter and Grbl by Erik van der Zalm.
@ -40,7 +43,6 @@ This firmware is optimized for Ultimaker's gen6 electronics (including the Ultim
The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.
========================================================================================
Differences and additions to the already good Sprinter firmware: Differences and additions to the already good Sprinter firmware:
================================================================ ================================================================
@ -114,7 +116,6 @@ Interrupt based temperature measurements:
An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures. An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures.
This leads to less blocking in the heater management routine. This leads to less blocking in the heater management routine.
========================================================================================
Non-standard M-Codes, different to an old version of sprinter: Non-standard M-Codes, different to an old version of sprinter:
============================================================== ==============================================================
G2 - CW ARC G2 - CW ARC