Adjust spacing in block_t

This commit is contained in:
Scott Lahteine 2016-06-09 15:31:08 -07:00
parent 80ab749563
commit 446515ab79

View File

@ -58,9 +58,9 @@ typedef struct {
long steps[NUM_AXIS]; // Step count along each axis long steps[NUM_AXIS]; // Step count along each axis
unsigned long step_event_count; // The number of step events required to complete this block unsigned long step_event_count; // The number of step events required to complete this block
long accelerate_until; // The index of the step event on which to stop acceleration long accelerate_until, // The index of the step event on which to stop acceleration
long decelerate_after; // The index of the step event on which to start decelerating decelerate_after, // The index of the step event on which to start decelerating
long acceleration_rate; // The acceleration rate used for acceleration calculation acceleration_rate; // The acceleration rate used for acceleration calculation
unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h) unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h)
@ -72,27 +72,26 @@ typedef struct {
#endif #endif
// Fields used by the motion planner to manage acceleration // Fields used by the motion planner to manage acceleration
float nominal_speed; // The nominal speed for this block in mm/sec float nominal_speed, // The nominal speed for this block in mm/sec
float entry_speed; // Entry speed at previous-current junction in mm/sec entry_speed, // Entry speed at previous-current junction in mm/sec
float max_entry_speed; // Maximum allowable junction entry speed in mm/sec max_entry_speed, // Maximum allowable junction entry speed in mm/sec
float millimeters; // The total travel of this block in mm millimeters, // The total travel of this block in mm
float acceleration; // acceleration mm/sec^2 acceleration; // acceleration mm/sec^2
unsigned char recalculate_flag; // Planner flag to recalculate trapezoids on entry junction unsigned char recalculate_flag, // Planner flag to recalculate trapezoids on entry junction
unsigned char nominal_length_flag; // Planner flag for nominal speed always reached nominal_length_flag; // Planner flag for nominal speed always reached
// Settings for the trapezoid generator // Settings for the trapezoid generator
unsigned long nominal_rate; // The nominal step rate for this block in step_events/sec unsigned long nominal_rate, // The nominal step rate for this block in step_events/sec
unsigned long initial_rate; // The jerk-adjusted step rate at start of block initial_rate, // The jerk-adjusted step rate at start of block
unsigned long final_rate; // The minimal rate at exit final_rate, // The minimal rate at exit
unsigned long acceleration_steps_per_s2; // acceleration steps/sec^2 acceleration_steps_per_s2; // acceleration steps/sec^2
#if FAN_COUNT > 0 #if FAN_COUNT > 0
unsigned long fan_speed[FAN_COUNT]; unsigned long fan_speed[FAN_COUNT];
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
unsigned long valve_pressure; unsigned long valve_pressure, e_to_p_pressure;
unsigned long e_to_p_pressure;
#endif #endif
volatile char busy; volatile char busy;