diff --git a/Marlin/Makefile b/Marlin/Makefile index 4c8137f335..222e60d620 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -122,188 +122,194 @@ ifeq ($(HARDWARE_MOTHERBOARD),0) # # MEGA/RAMPS up to 1.2 -else ifeq ($(HARDWARE_MOTHERBOARD),3) +else ifeq ($(HARDWARE_MOTHERBOARD),1000) # RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),33) +else ifeq ($(HARDWARE_MOTHERBOARD),1010) # RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),34) +else ifeq ($(HARDWARE_MOTHERBOARD),1011) # RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1) -else ifeq ($(HARDWARE_MOTHERBOARD),35) +else ifeq ($(HARDWARE_MOTHERBOARD),1012) # RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),36) +else ifeq ($(HARDWARE_MOTHERBOARD),1013) # RAMPS 1.3 (Power outputs: Spindle, Controller Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),38) +else ifeq ($(HARDWARE_MOTHERBOARD),1014) # RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),43) +else ifeq ($(HARDWARE_MOTHERBOARD),1020) # RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),44) +else ifeq ($(HARDWARE_MOTHERBOARD),1021) # RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) -else ifeq ($(HARDWARE_MOTHERBOARD),45) +else ifeq ($(HARDWARE_MOTHERBOARD),1022) # RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),46) +else ifeq ($(HARDWARE_MOTHERBOARD),1023) # RAMPS 1.4 (Power outputs: Spindle, Controller Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),48) +else ifeq ($(HARDWARE_MOTHERBOARD),1024) # RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),143) +else ifeq ($(HARDWARE_MOTHERBOARD),1030) # RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed) -else ifeq ($(HARDWARE_MOTHERBOARD),144) +else ifeq ($(HARDWARE_MOTHERBOARD),1031) # RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1) -else ifeq ($(HARDWARE_MOTHERBOARD),145) +else ifeq ($(HARDWARE_MOTHERBOARD),1032) # RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),146) +else ifeq ($(HARDWARE_MOTHERBOARD),1033) # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan) -else ifeq ($(HARDWARE_MOTHERBOARD),148) +else ifeq ($(HARDWARE_MOTHERBOARD),1034) # # RAMPS Derivatives - ATmega1280, ATmega2560 # # 3Drag Controller -else ifeq ($(HARDWARE_MOTHERBOARD),77) +else ifeq ($(HARDWARE_MOTHERBOARD),1100) # Velleman K8200 Controller (derived from 3Drag Controller) -else ifeq ($(HARDWARE_MOTHERBOARD),78) +else ifeq ($(HARDWARE_MOTHERBOARD),1101) # Velleman K8400 Controller (derived from 3Drag Controller) -else ifeq ($(HARDWARE_MOTHERBOARD),79) +else ifeq ($(HARDWARE_MOTHERBOARD),1102) # 2PrintBeta BAM&DICE with STK drivers -else ifeq ($(HARDWARE_MOTHERBOARD),401) +else ifeq ($(HARDWARE_MOTHERBOARD),1103) # 2PrintBeta BAM&DICE Due with STK drivers -else ifeq ($(HARDWARE_MOTHERBOARD),402) +else ifeq ($(HARDWARE_MOTHERBOARD),1104) # MKS BASE v1.0 -else ifeq ($(HARDWARE_MOTHERBOARD),40) +else ifeq ($(HARDWARE_MOTHERBOARD),1105) +# MKS v1.4 with A4982 stepper drivers +else ifeq ($(HARDWARE_MOTHERBOARD),1106) # MKS v1.5 with Allegro A4982 stepper drivers -else ifeq ($(HARDWARE_MOTHERBOARD),405) +else ifeq ($(HARDWARE_MOTHERBOARD),1107) # MKS BASE 1.0 with Heroic HR4982 stepper drivers -else ifeq ($(HARDWARE_MOTHERBOARD),41) +else ifeq ($(HARDWARE_MOTHERBOARD),1108) # MKS GEN v1.3 or 1.4 -else ifeq ($(HARDWARE_MOTHERBOARD),47) +else ifeq ($(HARDWARE_MOTHERBOARD),1109) # MKS GEN L -else ifeq ($(HARDWARE_MOTHERBOARD),53) +else ifeq ($(HARDWARE_MOTHERBOARD),1110) # zrib V2.0 control board (Chinese knock off RAMPS replica) -else ifeq ($(HARDWARE_MOTHERBOARD),504) +else ifeq ($(HARDWARE_MOTHERBOARD),1111) +# Bigtreetech or BIQU KFB2.0 +else ifeq ($(HARDWARE_MOTHERBOARD),1112) # Felix 2.0+ Electronics Board (RAMPS like) -else ifeq ($(HARDWARE_MOTHERBOARD),37) +else ifeq ($(HARDWARE_MOTHERBOARD),1113) # Invent-A-Part RigidBoard -else ifeq ($(HARDWARE_MOTHERBOARD),42) +else ifeq ($(HARDWARE_MOTHERBOARD),1114) # Invent-A-Part RigidBoard V2 -else ifeq ($(HARDWARE_MOTHERBOARD),52) +else ifeq ($(HARDWARE_MOTHERBOARD),1115) # Sainsmart 2-in-1 board -else ifeq ($(HARDWARE_MOTHERBOARD),49) +else ifeq ($(HARDWARE_MOTHERBOARD),1116) # Ultimaker -else ifeq ($(HARDWARE_MOTHERBOARD),7) +else ifeq ($(HARDWARE_MOTHERBOARD),1117) # Ultimaker (Older electronics. Pre 1.5.4. This is rare) -else ifeq ($(HARDWARE_MOTHERBOARD),71) +else ifeq ($(HARDWARE_MOTHERBOARD),1118) MCU ?= atmega1280 # Azteeg X3 -else ifeq ($(HARDWARE_MOTHERBOARD),67) +else ifeq ($(HARDWARE_MOTHERBOARD),1119) # Azteeg X3 Pro -else ifeq ($(HARDWARE_MOTHERBOARD),68) +else ifeq ($(HARDWARE_MOTHERBOARD),1120) # Ultimainboard 2.x (Uses TEMP_SENSOR 20) -else ifeq ($(HARDWARE_MOTHERBOARD),72) +else ifeq ($(HARDWARE_MOTHERBOARD),1121) # Rumba -else ifeq ($(HARDWARE_MOTHERBOARD),80) +else ifeq ($(HARDWARE_MOTHERBOARD),1122) # Raise3D Rumba -else ifeq ($(HARDWARE_MOTHERBOARD),333) +else ifeq ($(HARDWARE_MOTHERBOARD),1123) # Rapide Lite RL200 Rumba -else ifeq ($(HARDWARE_MOTHERBOARD),801) +else ifeq ($(HARDWARE_MOTHERBOARD),1124) # Formbot T-Rex 2 Plus -else ifeq ($(HARDWARE_MOTHERBOARD),95) +else ifeq ($(HARDWARE_MOTHERBOARD),1125) # Formbot T-Rex 3 -else ifeq ($(HARDWARE_MOTHERBOARD),96) +else ifeq ($(HARDWARE_MOTHERBOARD),1126) # Formbot Raptor -else ifeq ($(HARDWARE_MOTHERBOARD),97) +else ifeq ($(HARDWARE_MOTHERBOARD),1127) # Formbot Raptor 2 -else ifeq ($(HARDWARE_MOTHERBOARD),98) +else ifeq ($(HARDWARE_MOTHERBOARD),1128) # bq ZUM Mega 3D -else ifeq ($(HARDWARE_MOTHERBOARD),503) +else ifeq ($(HARDWARE_MOTHERBOARD),1129) # MakeBoard Mini v2.1.2 is a control board sold by MicroMake -else ifeq ($(HARDWARE_MOTHERBOARD),431) +else ifeq ($(HARDWARE_MOTHERBOARD),1130) # TriGorilla Anycubic version 1.3 based on RAMPS EFB -else ifeq ($(HARDWARE_MOTHERBOARD),343) +else ifeq ($(HARDWARE_MOTHERBOARD),1131) # TriGorilla Anycubic version 1.4 based on RAMPS EFB -else ifeq ($(HARDWARE_MOTHERBOARD),443) +else ifeq ($(HARDWARE_MOTHERBOARD),1132) # TriGorilla Anycubic version 1.4 Rev 1.1 -else ifeq ($(HARDWARE_MOTHERBOARD),444) +else ifeq ($(HARDWARE_MOTHERBOARD),1133) # Creality: Ender-4, CR-8 -else ifeq ($(HARDWARE_MOTHERBOARD),243) +else ifeq ($(HARDWARE_MOTHERBOARD),1134) # Creality: CR10S, CR20, CR-X -else ifeq ($(HARDWARE_MOTHERBOARD),244) +else ifeq ($(HARDWARE_MOTHERBOARD),1135) # Dagoma F5 -else ifeq ($(HARDWARE_MOTHERBOARD),245) +else ifeq ($(HARDWARE_MOTHERBOARD),1136) # Fysetc F6 -else ifeq ($(HARDWARE_MOTHERBOARD),541) +else ifeq ($(HARDWARE_MOTHERBOARD),1137) # Duplicator i3 Plus -else ifeq ($(HARDWARE_MOTHERBOARD),31) +else ifeq ($(HARDWARE_MOTHERBOARD),1138) # VORON -else ifeq ($(HARDWARE_MOTHERBOARD),441) +else ifeq ($(HARDWARE_MOTHERBOARD),1139) # TRONXY V3 1.0 -else ifeq ($(HARDWARE_MOTHERBOARD),442) +else ifeq ($(HARDWARE_MOTHERBOARD),1140) # Z-Bolt X Series -else ifeq ($(HARDWARE_MOTHERBOARD),550) +else ifeq ($(HARDWARE_MOTHERBOARD),1141) # # Other ATmega1280, ATmega2560 # # Cartesio CN Controls V11 -else ifeq ($(HARDWARE_MOTHERBOARD),111) +else ifeq ($(HARDWARE_MOTHERBOARD),1200) # Cartesio CN Controls V12 -else ifeq ($(HARDWARE_MOTHERBOARD),112) +else ifeq ($(HARDWARE_MOTHERBOARD),1201) # Cheaptronic v1.0 -else ifeq ($(HARDWARE_MOTHERBOARD),2) +else ifeq ($(HARDWARE_MOTHERBOARD),1202) # Cheaptronic v2.0 -else ifeq ($(HARDWARE_MOTHERBOARD),21) +else ifeq ($(HARDWARE_MOTHERBOARD),1203) # Makerbot Mightyboard Revision E -else ifeq ($(HARDWARE_MOTHERBOARD),200) +else ifeq ($(HARDWARE_MOTHERBOARD),1204) # Megatronics -else ifeq ($(HARDWARE_MOTHERBOARD),70) +else ifeq ($(HARDWARE_MOTHERBOARD),1205) # Megatronics v2.0 -else ifeq ($(HARDWARE_MOTHERBOARD),701) +else ifeq ($(HARDWARE_MOTHERBOARD),1206) # Megatronics v3.0 -else ifeq ($(HARDWARE_MOTHERBOARD),703) +else ifeq ($(HARDWARE_MOTHERBOARD),1207) # Megatronics v3.1 -else ifeq ($(HARDWARE_MOTHERBOARD),704) +else ifeq ($(HARDWARE_MOTHERBOARD),1208) +# Megatronics v3.2 +else ifeq ($(HARDWARE_MOTHERBOARD),1209) # Rambo -else ifeq ($(HARDWARE_MOTHERBOARD),301) +else ifeq ($(HARDWARE_MOTHERBOARD),1210) # Mini-Rambo -else ifeq ($(HARDWARE_MOTHERBOARD),302) +else ifeq ($(HARDWARE_MOTHERBOARD),1211) # Mini-Rambo 1.0a -else ifeq ($(HARDWARE_MOTHERBOARD),303) +else ifeq ($(HARDWARE_MOTHERBOARD),1212) # Einsy Rambo -else ifeq ($(HARDWARE_MOTHERBOARD),304) +else ifeq ($(HARDWARE_MOTHERBOARD),1213) # Einsy Retro -else ifeq ($(HARDWARE_MOTHERBOARD),305) +else ifeq ($(HARDWARE_MOTHERBOARD),1214) # Elefu Ra Board (v3) -else ifeq ($(HARDWARE_MOTHERBOARD),23) +else ifeq ($(HARDWARE_MOTHERBOARD),1215) # Leapfrog -else ifeq ($(HARDWARE_MOTHERBOARD),999) +else ifeq ($(HARDWARE_MOTHERBOARD),1216) # Mega controller -else ifeq ($(HARDWARE_MOTHERBOARD),310) +else ifeq ($(HARDWARE_MOTHERBOARD),1217) # abee Scoovo X9H -else ifeq ($(HARDWARE_MOTHERBOARD),321) +else ifeq ($(HARDWARE_MOTHERBOARD),1218) # Geeetech GT2560 Rev B for Mecreator2 -else ifeq ($(HARDWARE_MOTHERBOARD),73) +else ifeq ($(HARDWARE_MOTHERBOARD),1219) # Geeetech GT2560 Rev. A -else ifeq ($(HARDWARE_MOTHERBOARD),74) +else ifeq ($(HARDWARE_MOTHERBOARD),1220) # Geeetech GT2560 Rev. A+ (with auto level probe) -else ifeq ($(HARDWARE_MOTHERBOARD),75) +else ifeq ($(HARDWARE_MOTHERBOARD),1221) # Geeetech GT2560 Rev B for A10(M/D) -else ifeq ($(HARDWARE_MOTHERBOARD),76) +else ifeq ($(HARDWARE_MOTHERBOARD),1222) # Geeetech GT2560 Rev B for A20(M/D) -else ifeq ($(HARDWARE_MOTHERBOARD),86) +else ifeq ($(HARDWARE_MOTHERBOARD),1223) # Einstart retrofit -else ifeq ($(HARDWARE_MOTHERBOARD),666) +else ifeq ($(HARDWARE_MOTHERBOARD),1224) # # ATmega1281, ATmega2561 # -else ifeq ($(HARDWARE_MOTHERBOARD),702) +else ifeq ($(HARDWARE_MOTHERBOARD),1300) MCU ?= atmega1281 -else ifeq ($(HARDWARE_MOTHERBOARD),25) +else ifeq ($(HARDWARE_MOTHERBOARD),1310) MCU ?= atmega1281 # @@ -311,43 +317,43 @@ else ifeq ($(HARDWARE_MOTHERBOARD),25) # # Sanguinololu < 1.2 -else ifeq ($(HARDWARE_MOTHERBOARD),6) +else ifeq ($(HARDWARE_MOTHERBOARD),1400) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Sanguinololu 1.2 and above -else ifeq ($(HARDWARE_MOTHERBOARD),62) +else ifeq ($(HARDWARE_MOTHERBOARD),1401) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Melzi -else ifeq ($(HARDWARE_MOTHERBOARD),63) +else ifeq ($(HARDWARE_MOTHERBOARD),1402) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Melzi with ATmega1284 (MaKr3d version) -else ifeq ($(HARDWARE_MOTHERBOARD),66) +else ifeq ($(HARDWARE_MOTHERBOARD),1403) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # Melzi Creality3D board (for CR-10 etc) -else ifeq ($(HARDWARE_MOTHERBOARD),89) +else ifeq ($(HARDWARE_MOTHERBOARD),1404) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # Melzi Malyan M150 board -else ifeq ($(HARDWARE_MOTHERBOARD),92) +else ifeq ($(HARDWARE_MOTHERBOARD),1405) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # Tronxy X5S -else ifeq ($(HARDWARE_MOTHERBOARD),505) +else ifeq ($(HARDWARE_MOTHERBOARD),1406) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # STB V1.1 -else ifeq ($(HARDWARE_MOTHERBOARD),64) +else ifeq ($(HARDWARE_MOTHERBOARD),1407) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # Azteeg X1 -else ifeq ($(HARDWARE_MOTHERBOARD),65) +else ifeq ($(HARDWARE_MOTHERBOARD),1408) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p # Anet 1.0 (Melzi clone) -else ifeq ($(HARDWARE_MOTHERBOARD),69) +else ifeq ($(HARDWARE_MOTHERBOARD),1409) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega1284p @@ -356,51 +362,51 @@ else ifeq ($(HARDWARE_MOTHERBOARD),69) # # Gen3 Monolithic Electronics -else ifeq ($(HARDWARE_MOTHERBOARD),22) +else ifeq ($(HARDWARE_MOTHERBOARD),1500) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Gen3+ -else ifeq ($(HARDWARE_MOTHERBOARD),9) +else ifeq ($(HARDWARE_MOTHERBOARD),1501) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Gen6 -else ifeq ($(HARDWARE_MOTHERBOARD),5) +else ifeq ($(HARDWARE_MOTHERBOARD),1502) HARDWARE_VARIANT ?= Gen6 MCU ?= atmega644p # Gen6 deluxe -else ifeq ($(HARDWARE_MOTHERBOARD),51) +else ifeq ($(HARDWARE_MOTHERBOARD),1503) HARDWARE_VARIANT ?= Gen6 MCU ?= atmega644p # Gen7 custom (Alfons3 Version) -else ifeq ($(HARDWARE_MOTHERBOARD),10) +else ifeq ($(HARDWARE_MOTHERBOARD),1504) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644 F_CPU ?= 20000000 # Gen7 v1.1, v1.2 -else ifeq ($(HARDWARE_MOTHERBOARD),11) +else ifeq ($(HARDWARE_MOTHERBOARD),1505) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644p F_CPU ?= 20000000 # Gen7 v1.3 -else ifeq ($(HARDWARE_MOTHERBOARD),12) +else ifeq ($(HARDWARE_MOTHERBOARD),1506) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega644p F_CPU ?= 20000000 # Gen7 v1.4 -else ifeq ($(HARDWARE_MOTHERBOARD),13) +else ifeq ($(HARDWARE_MOTHERBOARD),1507) HARDWARE_VARIANT ?= Gen7 MCU ?= atmega1284p F_CPU ?= 20000000 # Alpha OMCA board -else ifeq ($(HARDWARE_MOTHERBOARD),90) +else ifeq ($(HARDWARE_MOTHERBOARD),1508) HARDWARE_VARIANT ?= SanguinoA MCU ?= atmega644 # Final OMCA board -else ifeq ($(HARDWARE_MOTHERBOARD),91) +else ifeq ($(HARDWARE_MOTHERBOARD),1509) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p # Sethi 3D_1 -else ifeq ($(HARDWARE_MOTHERBOARD),20) +else ifeq ($(HARDWARE_MOTHERBOARD),1510) HARDWARE_VARIANT ?= Sanguino MCU ?= atmega644p @@ -409,46 +415,46 @@ else ifeq ($(HARDWARE_MOTHERBOARD),20) # # Teensylu -else ifeq ($(HARDWARE_MOTHERBOARD),8) +else ifeq ($(HARDWARE_MOTHERBOARD),1600) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # Printrboard (AT90USB1286) -else ifeq ($(HARDWARE_MOTHERBOARD),81) +else ifeq ($(HARDWARE_MOTHERBOARD),1601) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # Printrboard Revision F (AT90USB1286) -else ifeq ($(HARDWARE_MOTHERBOARD),811) +else ifeq ($(HARDWARE_MOTHERBOARD),1602) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # Brainwave (AT90USB646) -else ifeq ($(HARDWARE_MOTHERBOARD),82) +else ifeq ($(HARDWARE_MOTHERBOARD),1603) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb646 # Brainwave Pro (AT90USB1286) -else ifeq ($(HARDWARE_MOTHERBOARD),83) +else ifeq ($(HARDWARE_MOTHERBOARD),1604) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # SAV Mk-I (AT90USB1286) -else ifeq ($(HARDWARE_MOTHERBOARD),84) +else ifeq ($(HARDWARE_MOTHERBOARD),1605) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # Teensy++2.0 (AT90USB1286) -else ifeq ($(HARDWARE_MOTHERBOARD),85) +else ifeq ($(HARDWARE_MOTHERBOARD),1606) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # 5DPrint D8 Driver Board -else ifeq ($(HARDWARE_MOTHERBOARD),88) +else ifeq ($(HARDWARE_MOTHERBOARD),1607) HARDWARE_VARIANT ?= Teensy MCU ?= at90usb1286 # UltiMachine Archim1 (with DRV8825 drivers) -else ifeq ($(HARDWARE_MOTHERBOARD),1591) +else ifeq ($(HARDWARE_MOTHERBOARD),3023) HARDWARE_VARIANT ?= archim MCPU = cortex-m3 F_CPU = 84000000L IS_MCU = 0 # UltiMachine Archim2 (with TMC2130 drivers) -else ifeq ($(HARDWARE_MOTHERBOARD),1592) +else ifeq ($(HARDWARE_MOTHERBOARD),3024) HARDWARE_VARIANT ?= archim MCPU = cortex-m3 F_CPU = 84000000L diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index b8a2530dd0..02f6c62cf6 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -27,265 +27,265 @@ // RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560 // -#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2 +#define BOARD_RAMPS_OLD 1000 // MEGA/RAMPS up to 1.2 -#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS_13_EFB 1010 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_13_EEB 1011 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_13_EFF 1012 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_13_EEF 1013 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_13_SF 1014 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan) -#define BOARD_RAMPS_14_EFB 43 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_14_EEB 44 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_14_EFF 45 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_14_EEF 46 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_14_SF 48 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS_14_EFB 1020 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_14_EEB 1021 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_14_EFF 1022 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_14_EEF 1023 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_14_SF 1024 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan) -#define BOARD_RAMPS_PLUS_EFB 143 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_PLUS_EEB 144 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_PLUS_EFF 145 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_PLUS_EEF 146 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_PLUS_SF 148 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS_PLUS_EFB 1030 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_PLUS_EEB 1031 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_PLUS_EFF 1032 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_PLUS_EEF 1033 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_PLUS_SF 1034 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan) // // RAMPS Derivatives - ATmega1280, ATmega2560 // -#define BOARD_3DRAG 77 // 3Drag Controller -#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller) -#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller) -#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers -#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers -#define BOARD_MKS_BASE 40 // MKS BASE v1.0 -#define BOARD_MKS_BASE_14 404 // MKS v1.4 A4982 stepper drivers -#define BOARD_MKS_BASE_15 405 // MKS v1.5 with Allegro A4982 stepper drivers -#define BOARD_MKS_BASE_HEROIC 41 // MKS BASE 1.0 with Heroic HR4982 stepper drivers -#define BOARD_MKS_GEN_13 47 // MKS GEN v1.3 or 1.4 -#define BOARD_MKS_GEN_L 53 // MKS GEN L -#define BOARD_KFB_2 136 // Bigtreetech or BIQU KFB2.0 -#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica) -#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like) -#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard -#define BOARD_RIGIDBOARD_V2 52 // Invent-A-Part RigidBoard V2 -#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board -#define BOARD_ULTIMAKER 7 // Ultimaker -#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) -#define BOARD_AZTEEG_X3 67 // Azteeg X3 -#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro -#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) -#define BOARD_RUMBA 80 // Rumba -#define BOARD_RUMBA_RAISE3D 333 // Raise3D N series Rumba derivative -#define BOARD_RL200 801 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) -#define BOARD_FORMBOT_TREX2PLUS 95 // Formbot T-Rex 2 Plus -#define BOARD_FORMBOT_TREX3 96 // Formbot T-Rex 3 -#define BOARD_FORMBOT_RAPTOR 97 // Formbot Raptor -#define BOARD_FORMBOT_RAPTOR2 98 // Formbot Raptor 2 -#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D -#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake -#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB -#define BOARD_TRIGORILLA_14 443 // ... Ver 1.4 -#define BOARD_TRIGORILLA_14_11 444 // ... Rev 1.1 (new servo pin order) -#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 -#define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X -#define BOARD_RAMPS_DAGOMA 245 // Dagoma F5 -#define BOARD_FYSETC_F6_13 541 // Fysetc F6 -#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus -#define BOARD_VORON 441 // VORON Design -#define BOARD_TRONXY_V3_1_0 442 // Tronxy TRONXY-V3-1.0 -#define BOARD_Z_BOLT_X_SERIES 550 // Z-Bolt X Series +#define BOARD_3DRAG 1100 // 3Drag Controller +#define BOARD_K8200 1101 // Velleman K8200 Controller (derived from 3Drag Controller) +#define BOARD_K8400 1102 // Velleman K8400 Controller (derived from 3Drag Controller) +#define BOARD_BAM_DICE 1103 // 2PrintBeta BAM&DICE with STK drivers +#define BOARD_BAM_DICE_DUE 1104 // 2PrintBeta BAM&DICE Due with STK drivers +#define BOARD_MKS_BASE 1105 // MKS BASE v1.0 +#define BOARD_MKS_BASE_14 1106 // MKS v1.4 with A4982 stepper drivers +#define BOARD_MKS_BASE_15 1107 // MKS v1.5 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_HEROIC 1108 // MKS BASE 1.0 with Heroic HR4982 stepper drivers +#define BOARD_MKS_GEN_13 1109 // MKS GEN v1.3 or 1.4 +#define BOARD_MKS_GEN_L 1110 // MKS GEN L +#define BOARD_KFB_2 1111 // Bigtreetech or BIQU KFB2.0 +#define BOARD_ZRIB_V20 1112 // zrib V2.0 control board (Chinese knock off RAMPS replica) +#define BOARD_FELIX2 1113 // Felix 2.0+ Electronics Board (RAMPS like) +#define BOARD_RIGIDBOARD 1114 // Invent-A-Part RigidBoard +#define BOARD_RIGIDBOARD_V2 1115 // Invent-A-Part RigidBoard V2 +#define BOARD_SAINSMART_2IN1 1116 // Sainsmart 2-in-1 board +#define BOARD_ULTIMAKER 1117 // Ultimaker +#define BOARD_ULTIMAKER_OLD 1118 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) +#define BOARD_AZTEEG_X3 1119 // Azteeg X3 +#define BOARD_AZTEEG_X3_PRO 1120 // Azteeg X3 Pro +#define BOARD_ULTIMAIN_2 1121 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) +#define BOARD_RUMBA 1122 // Rumba +#define BOARD_RUMBA_RAISE3D 1123 // Raise3D N series Rumba derivative +#define BOARD_RL200 1124 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) +#define BOARD_FORMBOT_TREX2PLUS 1125 // Formbot T-Rex 2 Plus +#define BOARD_FORMBOT_TREX3 1126 // Formbot T-Rex 3 +#define BOARD_FORMBOT_RAPTOR 1127 // Formbot Raptor +#define BOARD_FORMBOT_RAPTOR2 1128 // Formbot Raptor 2 +#define BOARD_BQ_ZUM_MEGA_3D 1129 // bq ZUM Mega 3D +#define BOARD_MAKEBOARD_MINI 1130 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake +#define BOARD_TRIGORILLA_13 1131 // TriGorilla Anycubic version 1.3-based on RAMPS EFB +#define BOARD_TRIGORILLA_14 1132 // ... Ver 1.4 +#define BOARD_TRIGORILLA_14_11 1133 // ... Rev 1.1 (new servo pin order) +#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8 +#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X +#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5 +#define BOARD_FYSETC_F6_13 1137 // Fysetc F6 +#define BOARD_DUPLICATOR_I3_PLUS 1138 // Wanhao Duplicator i3 Plus +#define BOARD_VORON 1139 // VORON Design +#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0 +#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series // // Other ATmega1280, ATmega2560 // -#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11 -#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12 -#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 -#define BOARD_CHEAPTRONIC_V2 21 // Cheaptronic v2.0 -#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E -#define BOARD_MEGATRONICS 70 // Megatronics -#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0 -#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0 -#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1 -#define BOARD_MEGATRONICS_32 705 // Megatronics v3.2 -#define BOARD_RAMBO 301 // Rambo -#define BOARD_MINIRAMBO 302 // Mini-Rambo -#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a -#define BOARD_EINSY_RAMBO 304 // Einsy Rambo -#define BOARD_EINSY_RETRO 305 // Einsy Retro -#define BOARD_ELEFU_3 23 // Elefu Ra Board (v3) -#define BOARD_LEAPFROG 999 // Leapfrog -#define BOARD_MEGACONTROLLER 310 // Mega controller -#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H -#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A -#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe) -#define BOARD_GT2560_V3 76 // Geeetech GT2560 Rev B for A10(M/D) -#define BOARD_GT2560_V3_MC2 73 // Geeetech GT2560 Rev B for Mecreator2 -#define BOARD_GT2560_V3_A20 86 // Geeetech GT2560 Rev B for A20(M/D) -#define BOARD_EINSTART_S 666 // Einstart retrofit +#define BOARD_CNCONTROLS_11 1200 // Cartesio CN Controls V11 +#define BOARD_CNCONTROLS_12 1201 // Cartesio CN Controls V12 +#define BOARD_CHEAPTRONIC 1202 // Cheaptronic v1.0 +#define BOARD_CHEAPTRONIC_V2 1203 // Cheaptronic v2.0 +#define BOARD_MIGHTYBOARD_REVE 1204 // Makerbot Mightyboard Revision E +#define BOARD_MEGATRONICS 1205 // Megatronics +#define BOARD_MEGATRONICS_2 1206 // Megatronics v2.0 +#define BOARD_MEGATRONICS_3 1207 // Megatronics v3.0 +#define BOARD_MEGATRONICS_31 1208 // Megatronics v3.1 +#define BOARD_MEGATRONICS_32 1209 // Megatronics v3.2 +#define BOARD_RAMBO 1210 // Rambo +#define BOARD_MINIRAMBO 1211 // Mini-Rambo +#define BOARD_MINIRAMBO_10A 1212 // Mini-Rambo 1.0a +#define BOARD_EINSY_RAMBO 1213 // Einsy Rambo +#define BOARD_EINSY_RETRO 1214 // Einsy Retro +#define BOARD_ELEFU_3 1215 // Elefu Ra Board (v3) +#define BOARD_LEAPFROG 1216 // Leapfrog +#define BOARD_MEGACONTROLLER 1217 // Mega controller +#define BOARD_SCOOVO_X9H 1218 // abee Scoovo X9H +#define BOARD_GT2560_REV_A 1219 // Geeetech GT2560 Rev. A +#define BOARD_GT2560_REV_A_PLUS 1220 // Geeetech GT2560 Rev. A+ (with auto level probe) +#define BOARD_GT2560_V3 1221 // Geeetech GT2560 Rev B for A10(M/D) +#define BOARD_GT2560_V3_MC2 1222 // Geeetech GT2560 Rev B for Mecreator2 +#define BOARD_GT2560_V3_A20 1223 // Geeetech GT2560 Rev B for A20(M/D) +#define BOARD_EINSTART_S 1224 // Einstart retrofit // // ATmega1281, ATmega2561 // -#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1 -#define BOARD_SILVER_GATE 25 // Silvergate v1.0 +#define BOARD_MINITRONICS 1300 // Minitronics v1.0/1.1 +#define BOARD_SILVER_GATE 1301 // Silvergate v1.0 // // Sanguinololu and Derivatives - ATmega644P, ATmega1284P // -#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2 -#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above -#define BOARD_MELZI 63 // Melzi -#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version) -#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc) -#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board -#define BOARD_MELZI_TRONXY 505 // Tronxy X5S -#define BOARD_STB_11 64 // STB V1.1 -#define BOARD_AZTEEG_X1 65 // Azteeg X1 -#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone) +#define BOARD_SANGUINOLOLU_11 1400 // Sanguinololu < 1.2 +#define BOARD_SANGUINOLOLU_12 1401 // Sanguinololu 1.2 and above +#define BOARD_MELZI 1402 // Melzi +#define BOARD_MELZI_MAKR3D 1403 // Melzi with ATmega1284 (MaKr3d version) +#define BOARD_MELZI_CREALITY 1404 // Melzi Creality3D board (for CR-10 etc) +#define BOARD_MELZI_MALYAN 1405 // Melzi Malyan M150 board +#define BOARD_MELZI_TRONXY 1406 // Tronxy X5S +#define BOARD_STB_11 1407 // STB V1.1 +#define BOARD_AZTEEG_X1 1408 // Azteeg X1 +#define BOARD_ANET_10 1409 // Anet 1.0 (Melzi clone) // // Other ATmega644P, ATmega644, ATmega1284P // -#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics -#define BOARD_GEN3_PLUS 9 // Gen3+ -#define BOARD_GEN6 5 // Gen6 -#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe -#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" -#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2 -#define BOARD_GEN7_13 12 // Gen7 v1.3 -#define BOARD_GEN7_14 13 // Gen7 v1.4 -#define BOARD_OMCA_A 90 // Alpha OMCA board -#define BOARD_OMCA 91 // Final OMCA board -#define BOARD_SETHI 20 // Sethi 3D_1 +#define BOARD_GEN3_MONOLITHIC 1500 // Gen3 Monolithic Electronics +#define BOARD_GEN3_PLUS 1501 // Gen3+ +#define BOARD_GEN6 1502 // Gen6 +#define BOARD_GEN6_DELUXE 1503 // Gen6 deluxe +#define BOARD_GEN7_CUSTOM 1504 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" +#define BOARD_GEN7_12 1505 // Gen7 v1.1, v1.2 +#define BOARD_GEN7_13 1506 // Gen7 v1.3 +#define BOARD_GEN7_14 1507 // Gen7 v1.4 +#define BOARD_OMCA_A 1508 // Alpha OMCA board +#define BOARD_OMCA 1509 // Final OMCA board +#define BOARD_SETHI 1510 // Sethi 3D_1 // // Teensyduino - AT90USB1286, AT90USB1286P // -#define BOARD_TEENSYLU 8 // Teensylu -#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286) -#define BOARD_PRINTRBOARD_REVF 811 // Printrboard Revision F (AT90USB1286) -#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646) -#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286) -#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286) -#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) -#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board +#define BOARD_TEENSYLU 1600 // Teensylu +#define BOARD_PRINTRBOARD 1601 // Printrboard (AT90USB1286) +#define BOARD_PRINTRBOARD_REVF 1602 // Printrboard Revision F (AT90USB1286) +#define BOARD_BRAINWAVE 1603 // Brainwave (AT90USB646) +#define BOARD_BRAINWAVE_PRO 1604 // Brainwave Pro (AT90USB1286) +#define BOARD_SAV_MKI 1605 // SAV Mk-I (AT90USB1286) +#define BOARD_TEENSY2 1606 // Teensy++2.0 (AT90USB1286) +#define BOARD_5DPRINT 1607 // 5DPrint D8 Driver Board // // LPC1768 ARM Cortex M3 // -#define BOARD_RAMPS_14_RE_ARM_EFB 1743 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_14_RE_ARM_EEB 1744 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_14_RE_ARM_EFF 1745 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_14_RE_ARM_EEF 1746 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_14_RE_ARM_SF 1748 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan) -#define BOARD_MKS_SBASE 1750 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan) -#define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini -#define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan) -#define BOARD_BIQU_BQ111_A4 1753 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed) -#define BOARD_SELENA_COMPACT 1754 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1) -#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix -#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini -#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard -#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan) -#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed) -#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver) -#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed) -#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) -#define BOARD_MKS_SGEN 1763 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan) -#define BOARD_MKS_SGEN_L 1764 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_RAMPS_14_RE_ARM_EFB 2000 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_14_RE_ARM_EEB 2001 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_14_RE_ARM_EFF 2002 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_14_RE_ARM_EEF 2003 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_14_RE_ARM_SF 2004 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan) +#define BOARD_MKS_SBASE 2005 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_AZSMZ_MINI 2006 // AZSMZ Mini +#define BOARD_AZTEEG_X5_GT 2007 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_BIQU_BQ111_A4 2008 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed) +#define BOARD_SELENA_COMPACT 2009 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1) +#define BOARD_COHESION3D_REMIX 2010 // Cohesion3D ReMix +#define BOARD_COHESION3D_MINI 2011 // Cohesion3D Mini +#define BOARD_SMOOTHIEBOARD 2012 // Smoothieboard +#define BOARD_AZTEEG_X5_MINI_WIFI 2013 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan) +#define BOARD_BIQU_SKR_V1_1 2014 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed) +#define BOARD_BIQU_B300_V1_0 2015 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver) +#define BOARD_BIGTREE_SKR_V1_3 2016 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed) +#define BOARD_AZTEEG_X5_MINI 2017 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) +#define BOARD_MKS_SGEN 2018 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_MKS_SGEN_L 2019 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan) // // SAM3X8E ARM Cortex M3 // -#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE -#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE -#define BOARD_RADDS 1502 // RADDS -#define BOARD_RAMPS_FD_V1 1503 // RAMPS-FD v1 -#define BOARD_RAMPS_FD_V2 1504 // RAMPS-FD v2 -#define BOARD_RAMPS_SMART_EFB 1523 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_SMART_EEB 1524 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_SMART_EFF 1525 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_SMART_EEF 1526 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_SMART_SF 1528 // RAMPS-SMART (Power outputs: Spindle, Controller Fan) -#define BOARD_RAMPS_DUO_EFB 1533 // RAMPS Duo (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS_DUO_EEB 1534 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS_DUO_EFF 1535 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS_DUO_EEF 1536 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS_DUO_SF 1538 // RAMPS Duo (Power outputs: Spindle, Controller Fan) -#define BOARD_RAMPS4DUE_EFB 1543 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed) -#define BOARD_RAMPS4DUE_EEB 1544 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed) -#define BOARD_RAMPS4DUE_EFF 1545 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1) -#define BOARD_RAMPS4DUE_EEF 1546 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan) -#define BOARD_RAMPS4DUE_SF 1548 // RAMPS4DUE (Power outputs: Spindle, Controller Fan) -#define BOARD_RURAMPS4D_11 1550 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed) -#define BOARD_RURAMPS4D_13 1551 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed) -#define BOARD_ULTRATRONICS_PRO 1560 // ReprapWorld Ultratronics Pro V1.0 -#define BOARD_ARCHIM1 1591 // UltiMachine Archim1 (with DRV8825 drivers) -#define BOARD_ARCHIM2 1592 // UltiMachine Archim2 (with TMC2130 drivers) -#define BOARD_ALLIGATOR 1602 // Alligator Board R2 +#define BOARD_DUE3DOM 3000 // DUE3DOM for Arduino DUE +#define BOARD_DUE3DOM_MINI 3001 // DUE3DOM MINI for Arduino DUE +#define BOARD_RADDS 3002 // RADDS +#define BOARD_RAMPS_FD_V1 3003 // RAMPS-FD v1 +#define BOARD_RAMPS_FD_V2 3004 // RAMPS-FD v2 +#define BOARD_RAMPS_SMART_EFB 3005 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_SMART_EEB 3006 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_SMART_EFF 3007 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_SMART_EEF 3008 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_SMART_SF 3009 // RAMPS-SMART (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS_DUO_EFB 3010 // RAMPS Duo (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_DUO_EEB 3011 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_DUO_EFF 3012 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_DUO_EEF 3013 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_DUO_SF 3014 // RAMPS Duo (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS4DUE_EFB 3015 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS4DUE_EEB 3016 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS4DUE_EFF 3017 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS4DUE_EEF 3018 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS4DUE_SF 3019 // RAMPS4DUE (Power outputs: Spindle, Controller Fan) +#define BOARD_RURAMPS4D_11 3020 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed) +#define BOARD_RURAMPS4D_13 3021 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed) +#define BOARD_ULTRATRONICS_PRO 3022 // ReprapWorld Ultratronics Pro V1.0 +#define BOARD_ARCHIM1 3023 // UltiMachine Archim1 (with DRV8825 drivers) +#define BOARD_ARCHIM2 3024 // UltiMachine Archim2 (with TMC2130 drivers) +#define BOARD_ALLIGATOR 3025 // Alligator Board R2 // // SAM3X8C ARM Cortex M3 // -#define BOARD_PRINTRBOARD_G2 1620 // PRINTRBOARD G2 -#define BOARD_ADSK 1610 // Arduino DUE Shield Kit (ADSK) +#define BOARD_PRINTRBOARD_G2 3100 // PRINTRBOARD G2 +#define BOARD_ADSK 3101 // Arduino DUE Shield Kit (ADSK) // // STM32 ARM Cortex-M3 // -#define BOARD_STM32F1R 1800 // STM32R Libmaple based STM32F1 controller -#define BOARD_MALYAN_M200 1801 // STM32C8T6 Libmaple based stm32f1 controller -#define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller -#define BOARD_GTM32_PRO_VB 1805 // STM32F103VET6 controller -#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller -#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6 -#define BOARD_MKS_ROBIN_MINI 1813 // MKS Robin Mini / STM32F103VET6 -#define BOARD_MKS_ROBIN_NANO 1812 // MKS Robin Nano / STM32F103VET6 -#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // BigTreeTech SKR Mini v1.1 / STM32F103RC -#define BOARD_BIGTREE_SKR_MINI_E3 1815 // BigTreeTech SKR Mini E3 / STM32F103RC -#define BOARD_JGAURORA_A5S_A1 1820 // JGAurora A5S A1 / STM32F103ZET6 -#define BOARD_FYSETC_AIO_II 1890 // FYSETC AIO_II -#define BOARD_FYSETC_CHEETAH 1891 // FYSETC CHEETAH +#define BOARD_STM32F1R 4000 // STM32R Libmaple-based STM32F1 controller +#define BOARD_MALYAN_M200 4001 // STM32C8T6 Libmaple-based STM32F1 controller +#define BOARD_STM3R_MINI 4002 // STM32 Libmaple-based STM32F1 controller +#define BOARD_GTM32_PRO_VB 4003 // STM32F103VET6 controller +#define BOARD_MORPHEUS 4004 // STM32F103C8 / STM32F103CB Libmaple-based STM32F1 controller +#define BOARD_MKS_ROBIN 4005 // MKS Robin (STM32F103ZET6) +#define BOARD_MKS_ROBIN_MINI 4006 // MKS Robin Mini (STM32F103VET6) +#define BOARD_MKS_ROBIN_NANO 4007 // MKS Robin Nano (STM32F103VET6) +#define BOARD_BIGTREE_SKR_MINI_V1_1 4008 // BigTreeTech SKR Mini v1.1 (STM32F103RC) +#define BOARD_BIGTREE_SKR_MINI_E3 4009 // BigTreeTech SKR Mini E3 (STM32F103RC) +#define BOARD_JGAURORA_A5S_A1 4010 // JGAurora A5S A1 (STM32F103ZET6) +#define BOARD_FYSETC_AIO_II 4011 // FYSETC AIO_II +#define BOARD_FYSETC_CHEETAH 4012 // FYSETC CHEETAH // // STM32 ARM Cortex-M4F // -#define BOARD_TEENSY31_32 1552 // Teensy3.1 and Teensy3.2 -#define BOARD_TEENSY35_36 841 // Teensy3.5 and Teensy3.6 -#define BOARD_BEAST 1802 // STM32FxxxVxT6 Libmaple based stm32f4 controller -#define BOARD_STM32F4 1804 // STM32 STM32GENERIC based STM32F4 controller -#define BOARD_ARMED 1807 // Arm'ed STM32F4 based controller -#define BOARD_RUMBA32 1809 // RUMBA32 STM32F4 based controller -#define BOARD_BLACK_STM32F407VE 1810 // BLACK_STM32F407VE -#define BOARD_BLACK_STM32F407ZE 1811 // BLACK_STM32F407ZE -#define BOARD_STEVAL 1866 // STEVAL-3DP001V1 3D PRINTER BOARD +#define BOARD_TEENSY31_32 4100 // Teensy3.1 and Teensy3.2 +#define BOARD_TEENSY35_36 4101 // Teensy3.5 and Teensy3.6 +#define BOARD_BEAST 4102 // STM32F4xxVxT6 Libmaple-based STM32F4 controller +#define BOARD_STM32F4 4103 // STM32 STM32GENERIC-based STM32F4 controller +#define BOARD_ARMED 4104 // Arm'ed STM32F4-based controller +#define BOARD_RUMBA32 4105 // RUMBA32 STM32F4-based controller +#define BOARD_BLACK_STM32F407VE 4106 // BLACK_STM32F407VE +#define BOARD_BLACK_STM32F407ZE 4107 // BLACK_STM32F407ZE +#define BOARD_STEVAL 4108 // STEVAL-3DP001V1 3D PRINTER BOARD // // ARM Cortex M7 // -#define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan) -#define BOARD_REMRAM_V1 1862 // RemRam v1 +#define BOARD_THE_BORG 5000 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan) +#define BOARD_REMRAM_V1 5001 // RemRam v1 // // Espressif ESP32 WiFi // -#define BOARD_ESP32 1900 +#define BOARD_ESP32 6000 // // Simulations // -#define BOARD_LINUX_RAMPS 2000 +#define BOARD_LINUX_RAMPS 9999 #define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)