MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Apply remaining ENABLED/DISABLED conditionals

Browse Source
This commit is contained in:
Scott Lahteine 2015-08-03 12:30:37 -07:00 committed by Richard Wackerbarth
parent 4a72d2ba9c
commit 46453905d6
29 changed files with 61 additions and 61 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Conditionals.h
View File

@ -75,7 +75,7 @@
#define NEWPANEL #define NEWPANEL
#endif #endif
#ifdef MINIPANEL #if ENABLED(MINIPANEL)
#define DOGLCD #define DOGLCD
#define SDSUPPORT #define SDSUPPORT
#define ULTIPANEL #define ULTIPANEL

6
Marlin/M100_Free_Mem_Chk.cpp
View File

@ -23,7 +23,7 @@
#include "Marlin.h" #include "Marlin.h"
#ifdef M100_FREE_MEMORY_WATCHER #if ENABLED(M100_FREE_MEMORY_WATCHER)
extern void *__brkval; extern void *__brkval;
extern size_t __heap_start, __heap_end, __flp; extern size_t __heap_start, __heap_end, __flp;
@ -73,7 +73,7 @@ int i, j, n;
// the right hand column to help spotting them. // the right hand column to help spotting them.
// //
#ifdef M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command #if ENABLED(M100_FREE_MEMORY_DUMPER) // Disable to remove Dump sub-command
if ( code_seen('D') ) { if ( code_seen('D') ) {
ptr = (unsigned char *) __brkval; ptr = (unsigned char *) __brkval;
@ -163,7 +163,7 @@ int i, j, n;
// M100 C x Corrupts x locations in the free memory pool and reports the locations of the corruption. // M100 C x Corrupts x locations in the free memory pool and reports the locations of the corruption.
// This is useful to check the correctness of the M100 D and the M100 F commands. // This is useful to check the correctness of the M100 D and the M100 F commands.
// //
#ifdef M100_FREE_MEMORY_CORRUPTOR #if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
if ( code_seen('C') ) { if ( code_seen('C') ) {
int x; // x gets the # of locations to corrupt within the memory pool int x; // x gets the # of locations to corrupt within the memory pool
x = code_value(); x = code_value();

14
Marlin/Marlin_main.cpp
View File

@ -4900,7 +4900,7 @@ inline void gcode_M503() {
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE); LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
millis_t next_tick = 0; millis_t next_tick = 0;
while (!lcd_clicked()) { while (!lcd_clicked()) {
#ifndef AUTO_FILAMENT_CHANGE #if DISABLED(AUTO_FILAMENT_CHANGE)
millis_t ms = millis(); millis_t ms = millis();
if (ms >= next_tick) { if (ms >= next_tick) {
lcd_quick_feedback(); lcd_quick_feedback();
@ -4918,7 +4918,7 @@ inline void gcode_M503() {
} // while(!lcd_clicked) } // while(!lcd_clicked)
lcd_quick_feedback(); // click sound feedback lcd_quick_feedback(); // click sound feedback
#ifdef AUTO_FILAMENT_CHANGE #if ENABLED(AUTO_FILAMENT_CHANGE)
current_position[E_AXIS] = 0; current_position[E_AXIS] = 0;
st_synchronize(); st_synchronize();
#endif #endif
@ -5377,7 +5377,7 @@ void process_next_command() {
break; break;
#endif // ENABLE_AUTO_BED_LEVELING && Z_PROBE_REPEATABILITY_TEST #endif // ENABLE_AUTO_BED_LEVELING && Z_PROBE_REPEATABILITY_TEST
#ifdef M100_FREE_MEMORY_WATCHER #if ENABLED(M100_FREE_MEMORY_WATCHER)
case 100: case 100:
gcode_M100(); gcode_M100();
break; break;
@ -6228,9 +6228,9 @@ void plan_arc(
clamp_to_software_endstops(arc_target); clamp_to_software_endstops(arc_target);
#if defined(DELTA) || defined(SCARA) #if ENABLED(DELTA) || ENABLED(SCARA)
calculate_delta(arc_target); calculate_delta(arc_target);
#ifdef ENABLE_AUTO_BED_LEVELING #if ENABLED(ENABLE_AUTO_BED_LEVELING)
adjust_delta(arc_target); adjust_delta(arc_target);
#endif #endif
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], arc_target[E_AXIS], feed_rate, active_extruder); plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], arc_target[E_AXIS], feed_rate, active_extruder);
@ -6240,9 +6240,9 @@ void plan_arc(
} }
// Ensure last segment arrives at target location. // Ensure last segment arrives at target location.
#if defined(DELTA) || defined(SCARA) #if ENABLED(DELTA) || ENABLED(SCARA)
calculate_delta(target); calculate_delta(target);
#ifdef ENABLE_AUTO_BED_LEVELING #if ENABLED(ENABLE_AUTO_BED_LEVELING)
adjust_delta(target); adjust_delta(target);
#endif #endif
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], target[E_AXIS], feed_rate, active_extruder); plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], target[E_AXIS], feed_rate, active_extruder);

2
Marlin/buzzer.cpp
View File

@ -9,7 +9,7 @@
lcd_buzz(duration, freq); lcd_buzz(duration, freq);
#elif PIN_EXISTS(BEEPER) // on-board buzzers have no further condition #elif PIN_EXISTS(BEEPER) // on-board buzzers have no further condition
SET_OUTPUT(BEEPER_PIN); SET_OUTPUT(BEEPER_PIN);
#ifdef SPEAKER // a speaker needs a AC ore a pulsed DC #if ENABLED(SPEAKER) // a speaker needs a AC ore a pulsed DC
//tone(BEEPER_PIN, freq, duration); // needs a PWMable pin //tone(BEEPER_PIN, freq, duration); // needs a PWMable pin
unsigned int delay = 1000000 / freq / 2; unsigned int delay = 1000000 / freq / 2;
int i = duration * freq / 1000; int i = duration * freq / 1000;

6
Marlin/dogm_lcd_implementation.h
View File

@ -125,10 +125,10 @@
#elif ENABLED(U8GLIB_LM6059_AF) #elif ENABLED(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);
#elif defined U8GLIB_SSD1306 #elif ENABLED(U8GLIB_SSD1306)
// Generic support for SSD1306 OLED I2C LCDs // Generic support for SSD1306 OLED I2C LCDs
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);
#elif defined(MINIPANEL) #elif ENABLED(MINIPANEL)
// The MINIPanel display // The MINIPanel display
U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0); U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else #else
@ -206,7 +206,7 @@ static void lcd_implementation_init() {
pinMode(LCD_PIN_RESET, OUTPUT); pinMode(LCD_PIN_RESET, OUTPUT);
digitalWrite(LCD_PIN_RESET, HIGH); digitalWrite(LCD_PIN_RESET, HIGH);
#endif #endif
#ifndef MINIPANEL//setContrast not working for Mini Panel #if DISABLED(MINIPANEL) // setContrast not working for Mini Panel
u8g.setContrast(lcd_contrast); u8g.setContrast(lcd_contrast);
#endif #endif
// FIXME: remove this workaround // FIXME: remove this workaround

2
Marlin/example_configurations/Felix/Configuration.h
View File

@ -301,7 +301,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

4
Marlin/example_configurations/Felix/Configuration_DUAL.h
View File

@ -286,7 +286,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX
@ -727,7 +727,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// With this option servos are powered only during movement, then turned off to prevent jitter. // With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
#ifdef DEACTIVATE_SERVOS_AFTER_MOVE #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
// Delay (in microseconds) before turning the servo off. This depends on the servo speed. // Delay (in microseconds) before turning the servo off. This depends on the servo speed.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.

2
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -311,7 +311,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/K8200/Configuration.h
View File

@ -307,7 +307,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -319,7 +319,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -327,7 +327,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors //#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -311,7 +311,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -319,7 +319,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/delta/biv2.5/Configuration.h
View File

@ -354,7 +354,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -354,7 +354,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -354,7 +354,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -341,7 +341,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/makibox/Configuration.h
View File

@ -322,7 +322,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -309,7 +309,7 @@ Here are some standard links for getting your machine calibrated:
// coarse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX

2
Marlin/pins_MEGACONTROLLER.h
View File

@ -80,7 +80,7 @@
#define TEMP_BED_PIN 1 // ANALOG NUMBERING #define TEMP_BED_PIN 1 // ANALOG NUMBERING
#endif #endif
#ifdef MINIPANEL #if ENABLED(MINIPANEL)
#define BEEPER_PIN 46 #define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47 #define DOGLCD_A0 47

2
Marlin/pins_MEGATRONICS.h
View File

@ -60,7 +60,7 @@
#define BEEPER_PIN 33 // AUX-4 #define BEEPER_PIN 33 // AUX-4
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17

2
Marlin/pins_PRINTRBOARD.h
View File

@ -45,7 +45,7 @@
#endif #endif
#define X_STOP_PIN 35 #define X_STOP_PIN 35
#ifdef SDSUPPORT #if ENABLED(SDSUPPORT)
#define Y_STOP_PIN 37 // Move Ystop to Estop socket #define Y_STOP_PIN 37 // Move Ystop to Estop socket
#else #else
#define Y_STOP_PIN 8 // Ystop in Ystop socket #define Y_STOP_PIN 8 // Ystop in Ystop socket

2
Marlin/pins_RAMPS_13.h
View File

@ -182,7 +182,7 @@
#define DOGLCD_CS 29 #define DOGLCD_CS 29
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#define LCD_PIN_BL 33 #define LCD_PIN_BL 33
#elif defined(MINIPANEL) #elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42 #define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44

8
Marlin/pins_RIGIDBOARD.h
View File

@ -46,7 +46,7 @@
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 22 #define SD_DETECT_PIN 22
#elif defined(REPRAP_DISCOUNT_SMART_CONTROLLER) #elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN -1 #define BEEPER_PIN -1
@ -61,10 +61,10 @@
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
#undef MAX6675_SS #undef MAX6675_SS
#ifndef SDSUPPORT #if ENABLED(SDSUPPORT)
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#else
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#endif #endif
// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3 // RigidBot swaps E0 / E1 plugs vs RAMPS 1.3

12
Marlin/planner.cpp
View File

@ -542,7 +542,7 @@ float junction_deviation = 0.1;
block->steps[A_AXIS] = labs(dx + dy); block->steps[A_AXIS] = labs(dx + dy);
block->steps[B_AXIS] = labs(dx - dy); block->steps[B_AXIS] = labs(dx - dy);
block->steps[Z_AXIS] = labs(dz); block->steps[Z_AXIS] = labs(dz);
#elif defined(COREXZ) #elif ENABLED(COREXZ)
// corexz planning // corexz planning
block->steps[A_AXIS] = labs(dx + dz); block->steps[A_AXIS] = labs(dx + dz);
block->steps[Y_AXIS] = labs(dy); block->steps[Y_AXIS] = labs(dy);
@ -577,7 +577,7 @@ float junction_deviation = 0.1;
if (dz < 0) db |= BIT(Z_AXIS); if (dz < 0) db |= BIT(Z_AXIS);
if (dx + dy < 0) db |= BIT(A_AXIS); // Motor A direction if (dx + dy < 0) db |= BIT(A_AXIS); // Motor A direction
if (dx - dy < 0) db |= BIT(B_AXIS); // Motor B direction if (dx - dy < 0) db |= BIT(B_AXIS); // Motor B direction
#elif defined(COREXZ) #elif ENABLED(COREXZ)
if (dx < 0) db |= BIT(X_HEAD); // Save the real Extruder (head) direction in X Axis if (dx < 0) db |= BIT(X_HEAD); // Save the real Extruder (head) direction in X Axis
if (dy < 0) db |= BIT(Y_AXIS); if (dy < 0) db |= BIT(Y_AXIS);
if (dz < 0) db |= BIT(Z_HEAD); // ...and Z if (dz < 0) db |= BIT(Z_HEAD); // ...and Z
@ -599,10 +599,10 @@ float junction_deviation = 0.1;
enable_x(); enable_x();
enable_y(); enable_y();
} }
#ifndef Z_LATE_ENABLE #if DISABLED(Z_LATE_ENABLE)
if (block->steps[Z_AXIS]) enable_z(); if (block->steps[Z_AXIS]) enable_z();
#endif #endif
#elif defined(COREXZ) #elif ENABLED(COREXZ)
if (block->steps[A_AXIS] || block->steps[C_AXIS]) { if (block->steps[A_AXIS] || block->steps[C_AXIS]) {
enable_x(); enable_x();
enable_z(); enable_z();
@ -611,7 +611,7 @@ float junction_deviation = 0.1;
#else #else
if (block->steps[X_AXIS]) enable_x(); if (block->steps[X_AXIS]) enable_x();
if (block->steps[Y_AXIS]) enable_y(); if (block->steps[Y_AXIS]) enable_y();
#ifndef Z_LATE_ENABLE #if DISABLED(Z_LATE_ENABLE)
if (block->steps[Z_AXIS]) enable_z(); if (block->steps[Z_AXIS]) enable_z();
#endif #endif
#endif #endif
@ -700,7 +700,7 @@ float junction_deviation = 0.1;
delta_mm[Z_AXIS] = dz / axis_steps_per_unit[Z_AXIS]; delta_mm[Z_AXIS] = dz / axis_steps_per_unit[Z_AXIS];
delta_mm[A_AXIS] = (dx + dy) / axis_steps_per_unit[A_AXIS]; delta_mm[A_AXIS] = (dx + dy) / axis_steps_per_unit[A_AXIS];
delta_mm[B_AXIS] = (dx - dy) / axis_steps_per_unit[B_AXIS]; delta_mm[B_AXIS] = (dx - dy) / axis_steps_per_unit[B_AXIS];
#elif defined(COREXZ) #elif ENABLED(COREXZ)
float delta_mm[6]; float delta_mm[6];
delta_mm[X_HEAD] = dx / axis_steps_per_unit[A_AXIS]; delta_mm[X_HEAD] = dx / axis_steps_per_unit[A_AXIS];
delta_mm[Y_AXIS] = dy / axis_steps_per_unit[Y_AXIS]; delta_mm[Y_AXIS] = dy / axis_steps_per_unit[Y_AXIS];

2
Marlin/servo.cpp
View File

@ -307,7 +307,7 @@ bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; }
void Servo::move(int value) { void Servo::move(int value) {
if (this->attach(0) >= 0) { if (this->attach(0) >= 0) {
this->write(value); this->write(value);
#ifdef DEACTIVATE_SERVOS_AFTER_MOVE #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
delay(SERVO_DEACTIVATION_DELAY); delay(SERVO_DEACTIVATION_DELAY);
this->detach(); this->detach();
#endif #endif

28
Marlin/stepper.cpp
View File

@ -289,7 +289,7 @@ void enable_endstops(bool check) { check_endstops = check; }
// Check endstops // Check endstops
inline void update_endstops() { inline void update_endstops() {
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
uint16_t uint16_t
#else #else
byte byte
@ -317,12 +317,12 @@ inline void update_endstops() {
step_events_completed = current_block->step_event_count; \ step_events_completed = current_block->step_event_count; \
} }
#ifdef COREXY #if ENABLED(COREXY)
// Head direction in -X axis for CoreXY bots. // Head direction in -X axis for CoreXY bots.
// If DeltaX == -DeltaY, the movement is only in Y axis // If DeltaX == -DeltaY, the movement is only in Y axis
if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) == TEST(out_bits, B_AXIS))) { if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) == TEST(out_bits, B_AXIS))) {
if (TEST(out_bits, X_HEAD)) if (TEST(out_bits, X_HEAD))
#elif defined(COREXZ) #elif ENABLED(COREXZ)
// Head direction in -X axis for CoreXZ bots. // Head direction in -X axis for CoreXZ bots.
// If DeltaX == -DeltaZ, the movement is only in Z axis // If DeltaX == -DeltaZ, the movement is only in Z axis
if ((current_block->steps[A_AXIS] != current_block->steps[C_AXIS]) || (TEST(out_bits, A_AXIS) == TEST(out_bits, C_AXIS))) { if ((current_block->steps[A_AXIS] != current_block->steps[C_AXIS]) || (TEST(out_bits, A_AXIS) == TEST(out_bits, C_AXIS))) {
@ -331,7 +331,7 @@ inline void update_endstops() {
if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular Cartesian bot) if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular Cartesian bot)
#endif #endif
{ // -direction { // -direction
#ifdef DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE)
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1)) if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1))
#endif #endif
@ -342,7 +342,7 @@ inline void update_endstops() {
} }
} }
else { // +direction else { // +direction
#ifdef DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE)
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1)) if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1))
#endif #endif
@ -352,11 +352,11 @@ inline void update_endstops() {
#endif #endif
} }
} }
#if defined(COREXY) || defined(COREXZ) #if ENABLED(COREXY) || ENABLED(COREXZ)
} }
#endif #endif
#ifdef COREXY #if ENABLED(COREXY)
// Head direction in -Y axis for CoreXY bots. // Head direction in -Y axis for CoreXY bots.
// If DeltaX == DeltaY, the movement is only in X axis // If DeltaX == DeltaY, the movement is only in X axis
if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) != TEST(out_bits, B_AXIS))) { if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) != TEST(out_bits, B_AXIS))) {
@ -374,11 +374,11 @@ inline void update_endstops() {
UPDATE_ENDSTOP(Y, MAX); UPDATE_ENDSTOP(Y, MAX);
#endif #endif
} }
#if defined(COREXY) #if ENABLED(COREXY)
} }
#endif #endif
#ifdef COREXZ #if ENABLED(COREXZ)
// Head direction in -Z axis for CoreXZ bots. // Head direction in -Z axis for CoreXZ bots.
// If DeltaX == DeltaZ, the movement is only in X axis // If DeltaX == DeltaZ, the movement is only in X axis
if ((current_block->steps[A_AXIS] != current_block->steps[C_AXIS]) || (TEST(out_bits, A_AXIS) != TEST(out_bits, C_AXIS))) { if ((current_block->steps[A_AXIS] != current_block->steps[C_AXIS]) || (TEST(out_bits, A_AXIS) != TEST(out_bits, C_AXIS))) {
@ -389,7 +389,7 @@ inline void update_endstops() {
{ // z -direction { // z -direction
#if HAS_Z_MIN #if HAS_Z_MIN
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
SET_ENDSTOP_BIT(Z, MIN); SET_ENDSTOP_BIT(Z, MIN);
#if HAS_Z2_MIN #if HAS_Z2_MIN
SET_ENDSTOP_BIT(Z2, MIN); SET_ENDSTOP_BIT(Z2, MIN);
@ -411,7 +411,7 @@ inline void update_endstops() {
#endif // !Z_DUAL_ENDSTOPS #endif // !Z_DUAL_ENDSTOPS
#endif // Z_MIN_PIN #endif // Z_MIN_PIN
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
UPDATE_ENDSTOP(Z, PROBE); UPDATE_ENDSTOP(Z, PROBE);
if (TEST_ENDSTOP(Z_PROBE)) if (TEST_ENDSTOP(Z_PROBE))
@ -424,7 +424,7 @@ inline void update_endstops() {
else { // z +direction else { // z +direction
#if HAS_Z_MAX #if HAS_Z_MAX
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
SET_ENDSTOP_BIT(Z, MAX); SET_ENDSTOP_BIT(Z, MAX);
#if HAS_Z2_MAX #if HAS_Z2_MAX
@ -449,7 +449,7 @@ inline void update_endstops() {
#endif // !Z_DUAL_ENDSTOPS #endif // !Z_DUAL_ENDSTOPS
#endif // Z_MAX_PIN #endif // Z_MAX_PIN
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
UPDATE_ENDSTOP(Z, PROBE); UPDATE_ENDSTOP(Z, PROBE);
if (TEST_ENDSTOP(Z_PROBE)) if (TEST_ENDSTOP(Z_PROBE))
@ -459,7 +459,7 @@ inline void update_endstops() {
} }
#endif #endif
} }
#if defined(COREXZ) #if ENABLED(COREXZ)
} }
#endif #endif
old_endstop_bits = current_endstop_bits; old_endstop_bits = current_endstop_bits;

2
Marlin/ultralcd.cpp
View File

@ -275,7 +275,7 @@ static void lcd_status_screen() {
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
millis_t ms = millis(); millis_t ms = millis();
#ifndef PROGRESS_MSG_ONCE #if DISABLED(PROGRESS_MSG_ONCE)
if (ms > progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) { if (ms > progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
progress_bar_ms = ms; progress_bar_ms = ms;
} }

2
Marlin/ultralcd_implementation_hitachi_HD44780.h
View File

@ -6,7 +6,7 @@
* When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters. * When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/ **/
//#ifndef REPRAPWORLD_KEYPAD //#if DISABLED(REPRAPWORLD_KEYPAD)
// extern volatile uint8_t buttons; //the last checked buttons in a bit array. // extern volatile uint8_t buttons; //the last checked buttons in a bit array.
//#else //#else
extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array. extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array.