diff --git a/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp b/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp index 0f17ed1ac7..f8005f2423 100644 --- a/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp +++ b/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp @@ -1,250 +1,271 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ #ifdef __AVR__ #include "../../inc/MarlinConfigPre.h" -/** - * get_pwm_timer - * Grabs timer information and registers of the provided pin - * returns Timer struct containing this information - * Used by set_pwm_frequency, set_pwm_duty - * - */ #if ENABLED(FAST_PWM_FAN) + #include "HAL.h" - struct Timer { - volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer - volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer - volatile uint16_t* ICRn; // max 1 ICR register per timer - uint8_t n; // the timer number [0->5] - uint8_t q; // the timer output [0->2] (A->C) - }; +struct Timer { + volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer + volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer + volatile uint16_t* ICRn; // max 1 ICR register per timer + uint8_t n; // the timer number [0->5] + uint8_t q; // the timer output [0->2] (A->C) +}; - Timer get_pwm_timer(pin_t pin) { - uint8_t q = 0; - switch (digitalPinToTimer(pin)) { - // Protect reserved timers (TIMER0 & TIMER1) - #ifdef TCCR0A - #if !AVR_AT90USB1286_FAMILY - case TIMER0A: - #endif - case TIMER0B: +/** + * get_pwm_timer + * Get the timer information and register of the provided pin. + * Return a Timer struct containing this information. + * Used by set_pwm_frequency, set_pwm_duty + */ +Timer get_pwm_timer(const pin_t pin) { + uint8_t q = 0; + switch (digitalPinToTimer(pin)) { + // Protect reserved timers (TIMER0 & TIMER1) + #ifdef TCCR0A + #if !AVR_AT90USB1286_FAMILY + case TIMER0A: #endif - #ifdef TCCR1A - case TIMER1A: case TIMER1B: - #endif - break; - #if defined(TCCR2) || defined(TCCR2A) - #ifdef TCCR2 - case TIMER2: { + case TIMER0B: + #endif + #ifdef TCCR1A + case TIMER1A: case TIMER1B: + #endif + break; + #if defined(TCCR2) || defined(TCCR2A) + #ifdef TCCR2 + case TIMER2: { + Timer timer = { + /*TCCRnQ*/ { &TCCR2, nullptr, nullptr}, + /*OCRnQ*/ { (uint16_t*)&OCR2, nullptr, nullptr}, + /*ICRn*/ nullptr, + /*n, q*/ 2, 0 + }; + } + #elif defined TCCR2A + #if ENABLED(USE_OCR2A_AS_TOP) + case TIMER2A: break; // protect TIMER2A + case TIMER2B: { Timer timer = { - /*TCCRnQ*/ { &TCCR2, nullptr, nullptr}, - /*OCRnQ*/ { (uint16_t*)&OCR2, nullptr, nullptr}, + /*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr}, + /*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr}, /*ICRn*/ nullptr, - /*n, q*/ 2, 0 + /*n, q*/ 2, 1 }; + return timer; + } + #else + case TIMER2B: ++q; + case TIMER2A: { + Timer timer = { + /*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr}, + /*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr}, + /*ICRn*/ nullptr, + 2, q + }; + return timer; } - #elif defined TCCR2A - #if ENABLED(USE_OCR2A_AS_TOP) - case TIMER2A: break; // protect TIMER2A - case TIMER2B: { - Timer timer = { - /*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr}, - /*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr}, - /*ICRn*/ nullptr, - /*n, q*/ 2, 1 - }; - return timer; - } - #else - case TIMER2B: ++q; - case TIMER2A: { - Timer timer = { - /*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr}, - /*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr}, - /*ICRn*/ nullptr, - 2, q - }; - return timer; - } - #endif #endif #endif - #ifdef TCCR3A - case TIMER3C: ++q; - case TIMER3B: ++q; - case TIMER3A: { - Timer timer = { - /*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C}, - /*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C}, - /*ICRn*/ &ICR3, - /*n, q*/ 3, q - }; - return timer; - } - #endif - #ifdef TCCR4A - case TIMER4C: ++q; - case TIMER4B: ++q; - case TIMER4A: { - Timer timer = { - /*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C}, - /*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C}, - /*ICRn*/ &ICR4, - /*n, q*/ 4, q - }; - return timer; - } - #endif - #ifdef TCCR5A - case TIMER5C: ++q; - case TIMER5B: ++q; - case TIMER5A: { - Timer timer = { - /*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C}, - /*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C }, - /*ICRn*/ &ICR5, - /*n, q*/ 5, q - }; - return timer; - } - #endif - } - Timer timer = { - /*TCCRnQ*/ { nullptr, nullptr, nullptr}, - /*OCRnQ*/ { nullptr, nullptr, nullptr}, - /*ICRn*/ nullptr, - 0, 0 - }; - return timer; + #endif + #ifdef TCCR3A + case TIMER3C: ++q; + case TIMER3B: ++q; + case TIMER3A: { + Timer timer = { + /*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C}, + /*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C}, + /*ICRn*/ &ICR3, + /*n, q*/ 3, q + }; + return timer; + } + #endif + #ifdef TCCR4A + case TIMER4C: ++q; + case TIMER4B: ++q; + case TIMER4A: { + Timer timer = { + /*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C}, + /*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C}, + /*ICRn*/ &ICR4, + /*n, q*/ 4, q + }; + return timer; + } + #endif + #ifdef TCCR5A + case TIMER5C: ++q; + case TIMER5B: ++q; + case TIMER5A: { + Timer timer = { + /*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C}, + /*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C }, + /*ICRn*/ &ICR5, + /*n, q*/ 5, q + }; + return timer; + } + #endif } + Timer timer = { + /*TCCRnQ*/ { nullptr, nullptr, nullptr}, + /*OCRnQ*/ { nullptr, nullptr, nullptr}, + /*ICRn*/ nullptr, + 0, 0 + }; + return timer; +} - void set_pwm_frequency(const pin_t pin, int f_desired) { - Timer timer = get_pwm_timer(pin); - if (timer.n == 0) return; // Don't proceed if protected timer or not recognised - uint16_t size; - if (timer.n == 2) size = 255; else size = 65535; +void set_pwm_frequency(const pin_t pin, int f_desired) { + Timer timer = get_pwm_timer(pin); + if (timer.n == 0) return; // Don't proceed if protected timer or not recognised + uint16_t size; + if (timer.n == 2) size = 255; else size = 65535; - uint16_t res = 255; // resolution (TOP value) - uint8_t j = 0; // prescaler index - uint8_t wgm = 1; // waveform generation mode + uint16_t res = 255; // resolution (TOP value) + uint8_t j = 0; // prescaler index + uint8_t wgm = 1; // waveform generation mode - // Calculating the prescaler and resolution to use to achieve closest frequency - if (f_desired != 0) { - int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable - uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 }; + // Calculating the prescaler and resolution to use to achieve closest frequency + if (f_desired != 0) { + int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable + uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 }; - // loop over prescaler values - for (uint8_t i = 1; i < 8; i++) { - uint16_t res_temp_fast = 255, res_temp_phase_correct = 255; - if (timer.n == 2) { - // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP - #if ENABLED(USE_OCR2A_AS_TOP) - const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired); - res_temp_fast = rtf - 1; - res_temp_phase_correct = rtf / 2; - #endif - } - else { - // Skip TIMER2 specific prescalers when not TIMER2 - if (i == 3 || i == 5) continue; + // loop over prescaler values + for (uint8_t i = 1; i < 8; i++) { + uint16_t res_temp_fast = 255, res_temp_phase_correct = 255; + if (timer.n == 2) { + // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP + #if ENABLED(USE_OCR2A_AS_TOP) const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired); res_temp_fast = rtf - 1; res_temp_phase_correct = rtf / 2; - } + #endif + } + else { + // Skip TIMER2 specific prescalers when not TIMER2 + if (i == 3 || i == 5) continue; + const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired); + res_temp_fast = rtf - 1; + res_temp_phase_correct = rtf / 2; + } - LIMIT(res_temp_fast, 1u, size); - LIMIT(res_temp_phase_correct, 1u, size); - // Calculate frequencies of test prescaler and resolution values - const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)), - f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct), - f_diff = ABS(f - f_desired), - f_fast_diff = ABS(f_temp_fast - f_desired), - f_phase_diff = ABS(f_temp_phase_correct - f_desired); + LIMIT(res_temp_fast, 1u, size); + LIMIT(res_temp_phase_correct, 1u, size); + // Calculate frequencies of test prescaler and resolution values + const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)), + f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct), + f_diff = ABS(f - f_desired), + f_fast_diff = ABS(f_temp_fast - f_desired), + f_phase_diff = ABS(f_temp_phase_correct - f_desired); - // If FAST values are closest to desired f - if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) { - // Remember this combination - f = f_temp_fast; - res = res_temp_fast; - j = i; - // Set the Wave Generation Mode to FAST PWM - if (timer.n == 2) { - wgm = ( - #if ENABLED(USE_OCR2A_AS_TOP) - WGM2_FAST_PWM_OCR2A - #else - WGM2_FAST_PWM - #endif - ); - } - else wgm = WGM_FAST_PWM_ICRn; + // If FAST values are closest to desired f + if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) { + // Remember this combination + f = f_temp_fast; + res = res_temp_fast; + j = i; + // Set the Wave Generation Mode to FAST PWM + if (timer.n == 2) { + wgm = ( + #if ENABLED(USE_OCR2A_AS_TOP) + WGM2_FAST_PWM_OCR2A + #else + WGM2_FAST_PWM + #endif + ); } - // If PHASE CORRECT values are closes to desired f - else if (f_phase_diff < f_diff) { - f = f_temp_phase_correct; - res = res_temp_phase_correct; - j = i; - // Set the Wave Generation Mode to PWM PHASE CORRECT - if (timer.n == 2) { - wgm = ( - #if ENABLED(USE_OCR2A_AS_TOP) - WGM2_PWM_PC_OCR2A - #else - WGM2_PWM_PC - #endif - ); - } - else wgm = WGM_PWM_PC_ICRn; + else wgm = WGM_FAST_PWM_ICRn; + } + // If PHASE CORRECT values are closes to desired f + else if (f_phase_diff < f_diff) { + f = f_temp_phase_correct; + res = res_temp_phase_correct; + j = i; + // Set the Wave Generation Mode to PWM PHASE CORRECT + if (timer.n == 2) { + wgm = ( + #if ENABLED(USE_OCR2A_AS_TOP) + WGM2_PWM_PC_OCR2A + #else + WGM2_PWM_PC + #endif + ); } + else wgm = WGM_PWM_PC_ICRn; } } - _SET_WGMnQ(timer.TCCRnQ, wgm); - _SET_CSn(timer.TCCRnQ, j); + } + _SET_WGMnQ(timer.TCCRnQ, wgm); + _SET_CSn(timer.TCCRnQ, j); - if (timer.n == 2) { - #if ENABLED(USE_OCR2A_AS_TOP) - _SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res - #endif + if (timer.n == 2) { + #if ENABLED(USE_OCR2A_AS_TOP) + _SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res + #endif + } + else + _SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res +} + +void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { + // If v is 0 or v_size (max), digitalWrite to LOW or HIGH. + // Note that digitalWrite also disables pwm output for us (sets COM bit to 0) + if (v == 0) + digitalWrite(pin, invert); + else if (v == v_size) + digitalWrite(pin, !invert); + else { + Timer timer = get_pwm_timer(pin); + if (timer.n == 0) return; // Don't proceed if protected timer or not recognised + // Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted) + _SET_COMnQ(timer.TCCRnQ, (timer.q + #ifdef TCCR2 + + (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro + #endif + ), COM_CLEAR_SET + invert + ); + + uint16_t top; + if (timer.n == 2) { // if TIMER2 + top = ( + #if ENABLED(USE_OCR2A_AS_TOP) + *timer.OCRnQ[0] // top = OCR2A + #else + 255 // top = 0xFF (max) + #endif + ); } else - _SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res - } - - void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { - // If v is 0 or v_size (max), digitalWrite to LOW or HIGH. - // Note that digitalWrite also disables pwm output for us (sets COM bit to 0) - if (v == 0) - digitalWrite(pin, invert); - else if (v == v_size) - digitalWrite(pin, !invert); - else { - Timer timer = get_pwm_timer(pin); - if (timer.n == 0) return; // Don't proceed if protected timer or not recognised - // Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted) - _SET_COMnQ(timer.TCCRnQ, (timer.q - #ifdef TCCR2 - + (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro - #endif - ), COM_CLEAR_SET + invert - ); - - uint16_t top; - if (timer.n == 2) { // if TIMER2 - top = ( - #if ENABLED(USE_OCR2A_AS_TOP) - *timer.OCRnQ[0] // top = OCR2A - #else - 255 // top = 0xFF (max) - #endif - ); - } - else - top = *timer.ICRn; // top = ICRn - - _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value - } + top = *timer.ICRn; // top = ICRn + + _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value } +} #endif // FAST_PWM_FAN #endif // __AVR__