From 89a845659a36ed0ef369e1223d013ac52cf2f61e Mon Sep 17 00:00:00 2001 From: esenapaj Date: Fri, 25 Mar 2016 02:13:37 +0900 Subject: [PATCH] Fix spelling PROBABLE ->PROBEABLE This is follow-up to #3069? --- Marlin/Marlin_main.cpp | 2 +- Marlin/SanityCheck.h | 2 +- .../delta/biv2.5/Configuration.h | 10 +++++----- .../delta/generic/Configuration.h | 10 +++++----- .../delta/kossel_mini/Configuration.h | 10 +++++----- .../delta/kossel_pro/Configuration.h | 10 +++++----- .../delta/kossel_xl/Configuration.h | 10 +++++----- 7 files changed, 27 insertions(+), 27 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 27f16b99c4..b796b86a0a 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -3079,7 +3079,7 @@ inline void gcode_G28() { #if ENABLED(DELTA) // Avoid probing the corners (outside the round or hexagon print surface) on a delta printer. float distance_from_center = sqrt(xProbe * xProbe + yProbe * yProbe); - if (distance_from_center > DELTA_PROBABLE_RADIUS) continue; + if (distance_from_center > DELTA_PROBEABLE_RADIUS) continue; #endif //DELTA ProbeAction act; diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index e2802acc0f..9d49792c1c 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -198,7 +198,7 @@ * Check if Probe_Offset * Grid Points is greater than Probing Range */ #if ENABLED(AUTO_BED_LEVELING_GRID) - #ifndef DELTA_PROBABLE_RADIUS + #ifndef DELTA_PROBEABLE_RADIUS // Be sure points are in the right order #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION #error LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION. diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index f026dafbc9..41c59abd3e 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -545,11 +545,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #if ENABLED(AUTO_BED_LEVELING_GRID) // Set the rectangle in which to probe. - #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) - #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS - #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 6aa9be56bd..0a35979a4b 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -545,11 +545,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #if ENABLED(AUTO_BED_LEVELING_GRID) // set the rectangle in which to probe - #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) - #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS - #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index a102ce973a..5cf1d17eb7 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -545,11 +545,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #if ENABLED(AUTO_BED_LEVELING_GRID) // set the rectangle in which to probe - #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) - #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS - #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index a84c5658cb..8d8104bfdb 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -532,11 +532,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #if ENABLED(AUTO_BED_LEVELING_GRID) // set the rectangle in which to probe - #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS-25) - #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS - #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS-25) + #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index abd19f54fa..4e5f754f13 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -537,11 +537,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #if ENABLED(AUTO_BED_LEVELING_GRID) - #define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) - #define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS - #define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS - #define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #define LEFT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -DELTA_PROBEABLE_RADIUS + #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define MIN_PROBE_EDGE 20 // The Z probe minimum square sides can be no smaller than this.