From 48d7036874e55131847360e5693d9807ee0e5184 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Mar 2018 19:01:42 -0500 Subject: [PATCH] Consolidate smart stepper driver initialization --- Marlin/src/feature/power.cpp | 5 + Marlin/src/gcode/control/M80_M81.cpp | 11 +- Marlin/src/module/stepper.cpp | 25 --- Marlin/src/module/stepper_indirection.cpp | 201 ++++++++++++++-------- Marlin/src/module/stepper_indirection.h | 77 +++++---- 5 files changed, 173 insertions(+), 146 deletions(-) diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index 6e5ba9d43f..72b2504cc0 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -88,6 +88,11 @@ void Power::check() { void Power::power_on() { lastPowerOn = millis(); PSU_PIN_ON(); + + #if HAS_TRINAMIC + delay(100); // Wait for power to settle + restore_stepper_drivers(); + #endif } void Power::power_off() { diff --git a/Marlin/src/gcode/control/M80_M81.cpp b/Marlin/src/gcode/control/M80_M81.cpp index eee197dbbd..59ae933221 100644 --- a/Marlin/src/gcode/control/M80_M81.cpp +++ b/Marlin/src/gcode/control/M80_M81.cpp @@ -76,14 +76,9 @@ OUT_WRITE(SUICIDE_PIN, HIGH); #endif - #if ENABLED(HAVE_TMC2130) - delay(100); - tmc2130_init(); // Settings only stick when the driver has power - #endif - - #if ENABLED(HAVE_TMC2208) - delay(100); - tmc2208_init(); + #if DISABLED(AUTO_POWER_CONTROL) + delay(100); // Wait for power to settle + restore_stepper_drivers(); #endif #if ENABLED(ULTIPANEL) diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 60305919b8..bdb25bbf6a 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -921,31 +921,6 @@ void Stepper::init() { microstep_init(); #endif - // Init TMC Steppers - #if ENABLED(HAVE_TMC26X) - tmc26x_init(); - #endif - - // Init TMC2130 Steppers - #if ENABLED(HAVE_TMC2130) - tmc2130_init(); - #endif - - // Init TMC2208 Steppers - #if ENABLED(HAVE_TMC2208) - tmc2208_init(); - #endif - - // TRAMS, TMC2130 and TMC2208 advanced settings - #if HAS_TRINAMIC - TMC_ADV() - #endif - - // Init L6470 Steppers - #if ENABLED(HAVE_L6470DRIVER) - L6470_init(); - #endif - // Init Dir Pins #if HAS_X_DIR X_DIR_INIT; diff --git a/Marlin/src/module/stepper_indirection.cpp b/Marlin/src/module/stepper_indirection.cpp index e92ad8826c..1e54fc8768 100644 --- a/Marlin/src/module/stepper_indirection.cpp +++ b/Marlin/src/module/stepper_indirection.cpp @@ -47,83 +47,82 @@ #include #endif - #define _TMC_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_ENABLE_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR) + #define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_ENABLE_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR) #if ENABLED(X_IS_TMC26X) - _TMC_DEFINE(X); + _TMC26X_DEFINE(X); #endif #if ENABLED(X2_IS_TMC26X) - _TMC_DEFINE(X2); + _TMC26X_DEFINE(X2); #endif #if ENABLED(Y_IS_TMC26X) - _TMC_DEFINE(Y); + _TMC26X_DEFINE(Y); #endif #if ENABLED(Y2_IS_TMC26X) - _TMC_DEFINE(Y2); + _TMC26X_DEFINE(Y2); #endif #if ENABLED(Z_IS_TMC26X) - _TMC_DEFINE(Z); + _TMC26X_DEFINE(Z); #endif #if ENABLED(Z2_IS_TMC26X) - _TMC_DEFINE(Z2); + _TMC26X_DEFINE(Z2); #endif #if ENABLED(E0_IS_TMC26X) - _TMC_DEFINE(E0); + _TMC26X_DEFINE(E0); #endif #if ENABLED(E1_IS_TMC26X) - _TMC_DEFINE(E1); + _TMC26X_DEFINE(E1); #endif #if ENABLED(E2_IS_TMC26X) - _TMC_DEFINE(E2); + _TMC26X_DEFINE(E2); #endif #if ENABLED(E3_IS_TMC26X) - _TMC_DEFINE(E3); + _TMC26X_DEFINE(E3); #endif #if ENABLED(E4_IS_TMC26X) - _TMC_DEFINE(E4); + _TMC26X_DEFINE(E4); #endif - #define _TMC_INIT(A) do{ \ + #define _TMC26X_INIT(A) do{ \ stepper##A.setMicrosteps(A##_MICROSTEPS); \ stepper##A.start(); \ }while(0) - void tmc26x_init() { + void tmc26x_init_to_defaults() { #if ENABLED(X_IS_TMC26X) - _TMC_INIT(X); + _TMC26X_INIT(X); #endif #if ENABLED(X2_IS_TMC26X) - _TMC_INIT(X2); + _TMC26X_INIT(X2); #endif #if ENABLED(Y_IS_TMC26X) - _TMC_INIT(Y); + _TMC26X_INIT(Y); #endif #if ENABLED(Y2_IS_TMC26X) - _TMC_INIT(Y2); + _TMC26X_INIT(Y2); #endif #if ENABLED(Z_IS_TMC26X) - _TMC_INIT(Z); + _TMC26X_INIT(Z); #endif #if ENABLED(Z2_IS_TMC26X) - _TMC_INIT(Z2); + _TMC26X_INIT(Z2); #endif #if ENABLED(E0_IS_TMC26X) - _TMC_INIT(E0); + _TMC26X_INIT(E0); #endif #if ENABLED(E1_IS_TMC26X) - _TMC_INIT(E1); + _TMC26X_INIT(E1); #endif #if ENABLED(E2_IS_TMC26X) - _TMC_INIT(E2); + _TMC26X_INIT(E2); #endif #if ENABLED(E3_IS_TMC26X) - _TMC_INIT(E3); + _TMC26X_INIT(E3); #endif #if ENABLED(E4_IS_TMC26X) - _TMC_INIT(E4); + _TMC26X_INIT(E4); #endif } - #endif // HAVE_TMC26X // @@ -180,9 +179,9 @@ // Use internal reference voltage for current calculations. This is the default. // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) // https://www.trinamic.com/products/integrated-circuits/details/tmc2130/ - void tmc2130_init(TMC2130Stepper &st, const uint16_t microsteps, const uint32_t thrs, const float spmm) { + void tmc2130_init(TMC2130Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) { st.begin(); - st.setCurrent(st.getCurrent(), R_SENSE, HOLD_MULTIPLIER); + st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER); st.microsteps(microsteps); st.blank_time(24); st.off_time(5); // Only enables the driver if used with stealthChop @@ -209,9 +208,9 @@ st.GSTAT(); // Clear GSTAT } - #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) + #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) - void tmc2130_init() { + void tmc2130_init_to_defaults() { #if ENABLED(X_IS_TMC2130) _TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]); #endif @@ -234,34 +233,45 @@ _TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); #endif #if ENABLED(E1_IS_TMC2130) - _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 1 - #endif - ]); + { constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E2_IS_TMC2130) - _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 2 - #endif - ]); + { constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E3_IS_TMC2130) - _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 3 - #endif - ]); + { constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E4_IS_TMC2130) - _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 4 - #endif - ]); + { constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } #endif + #if ENABLED(SENSORLESS_HOMING) + #define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY); + #ifdef X_HOMING_SENSITIVITY + #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) + stepperX.sgt(X_HOMING_SENSITIVITY); + #endif + #if ENABLED(X2_IS_TMC2130) + stepperX2.sgt(X_HOMING_SENSITIVITY); + #endif + #endif + #ifdef Y_HOMING_SENSITIVITY + #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) + stepperY.sgt(Y_HOMING_SENSITIVITY); + #endif + #if ENABLED(Y2_IS_TMC2130) + stepperY2.sgt(Y_HOMING_SENSITIVITY); + #endif + #endif + #ifdef Z_HOMING_SENSITIVITY + #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) + stepperZ.sgt(Z_HOMING_SENSITIVITY); + #endif + #if ENABLED(Z2_IS_TMC2130) + stepperZ2.sgt(Z_HOMING_SENSITIVITY); + #endif + #endif + #endif } #endif // HAVE_TMC2130 @@ -396,11 +406,11 @@ // Use internal reference voltage for current calculations. This is the default. // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) - void tmc2208_init(TMC2208Stepper &st, const uint16_t microsteps, const uint32_t thrs, const float spmm) { + void tmc2208_init(TMC2208Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) { st.pdn_disable(true); // Use UART st.mstep_reg_select(true); // Select microsteps with UART st.I_scale_analog(false); - st.rms_current(st.getCurrent(), HOLD_MULTIPLIER, R_SENSE); + st.rms_current(mA, HOLD_MULTIPLIER, R_SENSE); st.microsteps(microsteps); st.blank_time(24); st.toff(5); @@ -430,9 +440,9 @@ delay(200); } - #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) + #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) - void tmc2208_init() { + void tmc2208_init_to_defaults() { #if ENABLED(X_IS_TMC2208) _TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]); #endif @@ -455,36 +465,76 @@ _TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); #endif #if ENABLED(E1_IS_TMC2208) - _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 1 - #endif - ]); + { constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E2_IS_TMC2208) - _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 2 - #endif - ]); + { constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E3_IS_TMC2208) - _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 3 - #endif - ]); + { constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(E4_IS_TMC2208) - _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS - #if ENABLED(DISTINCT_E_FACTORS) - + 4 - #endif - ]); + { constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } #endif } #endif // HAVE_TMC2208 +void restore_stepper_drivers() { + #if X_IS_TRINAMIC + stepperX.push(); + #endif + #if X2_IS_TRINAMIC + stepperX2.push(); + #endif + #if Y_IS_TRINAMIC + stepperY.push(); + #endif + #if Y2_IS_TRINAMIC + stepperY2.push(); + #endif + #if Z_IS_TRINAMIC + stepperZ.push(); + #endif + #if Z2_IS_TRINAMIC + stepperZ2.push(); + #endif + #if E0_IS_TRINAMIC + stepperE0.push(); + #endif + #if E1_IS_TRINAMIC + stepperE1.push(); + #endif + #if E2_IS_TRINAMIC + stepperE2.push(); + #endif + #if E3_IS_TRINAMIC + stepperE3.push(); + #endif + #if E4_IS_TRINAMIC + stepperE4.push(); + #endif +} + +void reset_stepper_drivers() { + #if ENABLED(HAVE_TMC26X) + tmc26x_init_to_defaults(); + #endif + #if ENABLED(HAVE_TMC2130) + delay(100); + tmc2130_init_to_defaults(); + #endif + #if ENABLED(HAVE_TMC2208) + delay(100); + tmc2208_init_to_defaults(); + #endif + #ifdef TMC_ADV + TMC_ADV() + #endif + #if ENABLED(HAVE_L6470DRIVER) + L6470_init_to_defaults(); + #endif +} + // // L6470 Driver objects and inits // @@ -538,7 +588,7 @@ stepper##A.setStallCurrent(A##_STALLCURRENT); \ }while(0) - void L6470_init() { + void L6470_init_to_defaults() { #if ENABLED(X_IS_L6470) _L6470_INIT(X); #endif @@ -575,4 +625,3 @@ } #endif // HAVE_L6470DRIVER - diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h index 6a4126e5b7..3342337340 100644 --- a/Marlin/src/module/stepper_indirection.h +++ b/Marlin/src/module/stepper_indirection.h @@ -54,29 +54,32 @@ #else #include #endif - void tmc26x_init(); + void tmc26x_init_to_defaults(); #endif #if ENABLED(HAVE_TMC2130) #include - void tmc2130_init(); + void tmc2130_init_to_defaults(); #endif #if ENABLED(HAVE_TMC2208) #include void tmc2208_serial_begin(); - void tmc2208_init(); + void tmc2208_init_to_defaults(); #endif // L6470 has STEP on normal pins, but DIR/ENABLE via SPI #if ENABLED(HAVE_L6470DRIVER) #include #include - void L6470_init(); + void L6470_init_to_defaults(); #endif +void restore_stepper_drivers(); // Called by PSU_ON +void reset_stepper_drivers(); // Called by settings.load / settings.reset + // X Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(X_IS_L6470) +#if ENABLED(X_IS_L6470) extern L6470 stepperX; #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0) @@ -91,9 +94,9 @@ #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE) #define X_ENABLE_READ stepperX.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(X_IS_TMC2130) + #if ENABLED(X_IS_TMC2130) extern TMC2130Stepper stepperX; - #elif ENABLED(HAVE_TMC2208) && ENABLED(X_IS_TMC2208) + #elif ENABLED(X_IS_TMC2208) extern TMC2208Stepper stepperX; #endif #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN) @@ -109,7 +112,7 @@ #define X_STEP_READ READ(X_STEP_PIN) // Y Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(Y_IS_L6470) +#if ENABLED(Y_IS_L6470) extern L6470 stepperY; #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0) @@ -124,9 +127,9 @@ #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE) #define Y_ENABLE_READ stepperY.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(Y_IS_TMC2130) + #if ENABLED(Y_IS_TMC2130) extern TMC2130Stepper stepperY; - #elif ENABLED(HAVE_TMC2208) && ENABLED(Y_IS_TMC2208) + #elif ENABLED(Y_IS_TMC2208) extern TMC2208Stepper stepperY; #endif #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN) @@ -142,7 +145,7 @@ #define Y_STEP_READ READ(Y_STEP_PIN) // Z Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(Z_IS_L6470) +#if ENABLED(Z_IS_L6470) extern L6470 stepperZ; #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0) @@ -157,9 +160,9 @@ #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE) #define Z_ENABLE_READ stepperZ.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(Z_IS_TMC2130) + #if ENABLED(Z_IS_TMC2130) extern TMC2130Stepper stepperZ; - #elif ENABLED(HAVE_TMC2208) && ENABLED(Z_IS_TMC2208) + #elif ENABLED(Z_IS_TMC2208) extern TMC2208Stepper stepperZ; #endif #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN) @@ -176,7 +179,7 @@ // X2 Stepper #if HAS_X2_ENABLE - #if ENABLED(HAVE_L6470DRIVER) && ENABLED(X2_IS_L6470) + #if ENABLED(X2_IS_L6470) extern L6470 stepperX2; #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0) @@ -191,9 +194,9 @@ #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE) #define X2_ENABLE_READ stepperX2.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(X2_IS_TMC2130) + #if ENABLED(X2_IS_TMC2130) extern TMC2130Stepper stepperX2; - #elif ENABLED(HAVE_TMC2208) && ENABLED(X2_IS_TMC2208) + #elif ENABLED(X2_IS_TMC2208) extern TMC2208Stepper stepperX2; #endif #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN) @@ -211,7 +214,7 @@ // Y2 Stepper #if HAS_Y2_ENABLE - #if ENABLED(HAVE_L6470DRIVER) && ENABLED(Y2_IS_L6470) + #if ENABLED(Y2_IS_L6470) extern L6470 stepperY2; #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0) @@ -226,9 +229,9 @@ #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE) #define Y2_ENABLE_READ stepperY2.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(Y2_IS_TMC2130) + #if ENABLED(Y2_IS_TMC2130) extern TMC2130Stepper stepperY2; - #elif ENABLED(HAVE_TMC2208) && ENABLED(Y2_IS_TMC2208) + #elif ENABLED(Y2_IS_TMC2208) extern TMC2208Stepper stepperY2; #endif #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN) @@ -246,7 +249,7 @@ // Z2 Stepper #if HAS_Z2_ENABLE - #if ENABLED(HAVE_L6470DRIVER) && ENABLED(Z2_IS_L6470) + #if ENABLED(Z2_IS_L6470) extern L6470 stepperZ2; #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0) @@ -261,9 +264,9 @@ #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE) #define Z2_ENABLE_READ stepperZ2.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(Z2_IS_TMC2130) + #if ENABLED(Z2_IS_TMC2130) extern TMC2130Stepper stepperZ2; - #elif ENABLED(HAVE_TMC2208) && ENABLED(Z2_IS_TMC2208) + #elif ENABLED(Z2_IS_TMC2208) extern TMC2208Stepper stepperZ2; #endif #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN) @@ -280,7 +283,7 @@ #endif // E0 Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E0_IS_L6470) +#if ENABLED(E0_IS_L6470) extern L6470 stepperE0; #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0) @@ -295,9 +298,9 @@ #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE) #define E0_ENABLE_READ stepperE0.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(E0_IS_TMC2130) + #if ENABLED(E0_IS_TMC2130) extern TMC2130Stepper stepperE0; - #elif ENABLED(HAVE_TMC2208) && ENABLED(E0_IS_TMC2208) + #elif ENABLED(E0_IS_TMC2208) extern TMC2208Stepper stepperE0; #endif #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN) @@ -313,7 +316,7 @@ #define E0_STEP_READ READ(E0_STEP_PIN) // E1 Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E1_IS_L6470) +#if ENABLED(E1_IS_L6470) extern L6470 stepperE1; #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0) @@ -328,9 +331,9 @@ #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE) #define E1_ENABLE_READ stepperE1.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(E1_IS_TMC2130) + #if ENABLED(E1_IS_TMC2130) extern TMC2130Stepper stepperE1; - #elif ENABLED(HAVE_TMC2208) && ENABLED(E1_IS_TMC2208) + #elif ENABLED(E1_IS_TMC2208) extern TMC2208Stepper stepperE1; #endif #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN) @@ -346,7 +349,7 @@ #define E1_STEP_READ READ(E1_STEP_PIN) // E2 Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E2_IS_L6470) +#if ENABLED(E2_IS_L6470) extern L6470 stepperE2; #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0) @@ -361,9 +364,9 @@ #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE) #define E2_ENABLE_READ stepperE2.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(E2_IS_TMC2130) + #if ENABLED(E2_IS_TMC2130) extern TMC2130Stepper stepperE2; - #elif ENABLED(HAVE_TMC2208) && ENABLED(E2_IS_TMC2208) + #elif ENABLED(E2_IS_TMC2208) extern TMC2208Stepper stepperE2; #endif #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN) @@ -379,7 +382,7 @@ #define E2_STEP_READ READ(E2_STEP_PIN) // E3 Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E3_IS_L6470) +#if ENABLED(E3_IS_L6470) extern L6470 stepperE3; #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0) @@ -394,9 +397,9 @@ #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE) #define E3_ENABLE_READ stepperE3.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(E3_IS_TMC2130) + #if ENABLED(E3_IS_TMC2130) extern TMC2130Stepper stepperE3; - #elif ENABLED(HAVE_TMC2208) && ENABLED(E3_IS_TMC2208) + #elif ENABLED(E3_IS_TMC2208) extern TMC2208Stepper stepperE3; #endif #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN) @@ -412,7 +415,7 @@ #define E3_STEP_READ READ(E3_STEP_PIN) // E4 Stepper -#if ENABLED(HAVE_L6470DRIVER) && ENABLED(E4_IS_L6470) +#if ENABLED(E4_IS_L6470) extern L6470 stepperE4; #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0) @@ -427,9 +430,9 @@ #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE) #define E4_ENABLE_READ stepperE4.isEnabled() #else - #if ENABLED(HAVE_TMC2130) && ENABLED(E4_IS_TMC2130) + #if ENABLED(E4_IS_TMC2130) extern TMC2130Stepper stepperE4; - #elif ENABLED(HAVE_TMC2208) && ENABLED(E4_IS_TMC2208) + #elif ENABLED(E4_IS_TMC2208) extern TMC2208Stepper stepperE4; #endif #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)