M256 LCD brightness (#22478)

This commit is contained in:
Scott Lahteine 2021-08-01 14:28:53 -05:00
parent eeac85642f
commit 4b2fdbeeb1
10 changed files with 114 additions and 13 deletions

View File

@ -729,6 +729,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 250: M250(); break; // M250: Set LCD contrast case 250: M250(); break; // M250: Set LCD contrast
#endif #endif
#if HAS_LCD_BRIGHTNESS
case 256: M256(); break; // M256: Set LCD brightness
#endif
#if ENABLED(EXPERIMENTAL_I2CBUS) #if ENABLED(EXPERIMENTAL_I2CBUS)
case 260: M260(); break; // M260: Send data to an i2c slave case 260: M260(); break; // M260: Send data to an i2c slave
case 261: M261(); break; // M261: Request data from an i2c slave case 261: M261(); break; // M261: Request data from an i2c slave

View File

@ -191,6 +191,7 @@
* M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>" (Requires DIRECT_PIN_CONTROL) * M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>" (Requires DIRECT_PIN_CONTROL)
* M240 - Trigger a camera to take a photograph. (Requires PHOTO_GCODE) * M240 - Trigger a camera to take a photograph. (Requires PHOTO_GCODE)
* M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support) * M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M256 - Set LCD brightness: "M256 B<brightness>" (0-255). (Requires an LCD with brightness control)
* M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS) * M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS)
* M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS) * M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
* M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos) * M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
@ -818,6 +819,10 @@ private:
static void M250(); static void M250();
#endif #endif
#if HAS_LCD_BRIGHTNESS
static void M256();
#endif
#if ENABLED(EXPERIMENTAL_I2CBUS) #if ENABLED(EXPERIMENTAL_I2CBUS)
static void M260(); static void M260();
static void M261(); static void M261();

View File

@ -0,0 +1,37 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_LCD_BRIGHTNESS
#include "../gcode.h"
#include "../../lcd/marlinui.h"
/**
* M256: Set the LCD brightness
*/
void GcodeSuite::M256() {
if (parser.seenval('B')) ui.set_brightness(parser.value_int());
SERIAL_ECHOLNPAIR("LCD Brightness: ", ui.brightness);
}
#endif // HAS_LCD_BRIGHTNESS

View File

@ -35,13 +35,13 @@
* M73 P25 ; Set progress to 25% * M73 P25 ; Set progress to 25%
*/ */
void GcodeSuite::M73() { void GcodeSuite::M73() {
if (parser.seen('P')) if (parser.seenval('P'))
ui.set_progress((PROGRESS_SCALE) > 1 ui.set_progress((PROGRESS_SCALE) > 1
? parser.value_float() * (PROGRESS_SCALE) ? parser.value_float() * (PROGRESS_SCALE)
: parser.value_byte() : parser.value_byte()
); );
#if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME) #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
if (parser.seen('R')) ui.set_remaining_time(60 * parser.value_ulong()); if (parser.seenval('R')) ui.set_remaining_time(60 * parser.value_ulong());
#endif #endif
} }

View File

@ -98,6 +98,17 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
} }
#endif #endif
#if HAS_LCD_BRIGHTNESS
uint8_t MarlinUI::brightness = DEFAULT_LCD_BRIGHTNESS;
bool MarlinUI::backlight = true;
void MarlinUI::set_brightness(const uint8_t value) {
backlight = !!value;
if (backlight) brightness = constrain(value, MIN_LCD_BRIGHTNESS, MAX_LCD_BRIGHTNESS);
// Set brightness on enabled LCD here
}
#endif
#if ENABLED(SOUND_MENU_ITEM) #if ENABLED(SOUND_MENU_ITEM)
bool MarlinUI::buzzer_enabled = true; bool MarlinUI::buzzer_enabled = true;
#endif #endif

View File

@ -239,6 +239,22 @@ public:
static void media_changed(const uint8_t old_stat, const uint8_t stat); static void media_changed(const uint8_t old_stat, const uint8_t stat);
#endif #endif
#if HAS_LCD_BRIGHTNESS
#ifndef MIN_LCD_BRIGHTNESS
#define MIN_LCD_BRIGHTNESS 1
#endif
#ifndef MAX_LCD_BRIGHTNESS
#define MAX_LCD_BRIGHTNESS 255
#endif
#ifndef DEFAULT_LCD_BRIGHTNESS
#define DEFAULT_LCD_BRIGHTNESS MAX_LCD_BRIGHTNESS
#endif
static uint8_t brightness;
static bool backlight;
static void set_brightness(const uint8_t value);
FORCE_INLINE static void refresh_brightness() { set_brightness(brightness); }
#endif
#if ENABLED(DWIN_CREALITY_LCD) #if ENABLED(DWIN_CREALITY_LCD)
static void refresh(); static void refresh();
#else #else

View File

@ -36,7 +36,7 @@
*/ */
// Change EEPROM version if the structure changes // Change EEPROM version if the structure changes
#define EEPROM_VERSION "V83" #define EEPROM_VERSION "V84"
#define EEPROM_OFFSET 100 #define EEPROM_OFFSET 100
// Check the integrity of data offsets. // Check the integrity of data offsets.
@ -353,6 +353,11 @@ typedef struct SettingsDataStruct {
// //
int16_t lcd_contrast; // M250 C int16_t lcd_contrast; // M250 C
//
// HAS_LCD_BRIGHTNESS
//
uint8_t lcd_brightness; // M256 B
// //
// Controller fan settings // Controller fan settings
// //
@ -999,17 +1004,19 @@ void MarlinSettings::postprocess() {
// //
{ {
_FIELD_TEST(lcd_contrast); _FIELD_TEST(lcd_contrast);
const int16_t lcd_contrast = TERN(HAS_LCD_CONTRAST, ui.contrast, 127);
const int16_t lcd_contrast =
#if HAS_LCD_CONTRAST
ui.contrast
#else
127
#endif
;
EEPROM_WRITE(lcd_contrast); EEPROM_WRITE(lcd_contrast);
} }
//
// LCD Brightness
//
{
_FIELD_TEST(lcd_brightness);
const uint8_t lcd_brightness = TERN(HAS_LCD_BRIGHTNESS, ui.brightness, 255);
EEPROM_WRITE(lcd_brightness);
}
// //
// Controller Fan // Controller Fan
// //
@ -1846,6 +1853,16 @@ void MarlinSettings::postprocess() {
} }
} }
//
// LCD Brightness
//
{
_FIELD_TEST(lcd_brightness);
uint8_t lcd_brightness;
EEPROM_READ(lcd_brightness);
TERN_(HAS_LCD_BRIGHTNESS, if (!validating) ui.set_brightness(lcd_brightness));
}
// //
// Controller Fan // Controller Fan
// //
@ -2829,6 +2846,11 @@ void MarlinSettings::reset() {
// //
TERN_(HAS_LCD_CONTRAST, ui.set_contrast(DEFAULT_LCD_CONTRAST)); TERN_(HAS_LCD_CONTRAST, ui.set_contrast(DEFAULT_LCD_CONTRAST));
//
// LCD Brightness
//
TERN_(HAS_LCD_BRIGHTNESS, ui.set_brightness(DEFAULT_LCD_BRIGHTNESS));
// //
// Controller Fan // Controller Fan
// //
@ -3406,6 +3428,11 @@ void MarlinSettings::reset() {
CONFIG_ECHO_MSG(" M250 C", ui.contrast); CONFIG_ECHO_MSG(" M250 C", ui.contrast);
#endif #endif
#if HAS_LCD_BRIGHTNESS
CONFIG_ECHO_HEADING("LCD Brightness:");
CONFIG_ECHO_MSG(" M256 B", ui.brightness);
#endif
TERN_(CONTROLLER_FAN_EDITABLE, M710_report(forReplay)); TERN_(CONTROLLER_FAN_EDITABLE, M710_report(forReplay));
#if ENABLED(POWER_LOSS_RECOVERY) #if ENABLED(POWER_LOSS_RECOVERY)

View File

@ -189,6 +189,7 @@ HAS_GCODE_M876 = src_filter=+<src/gcode/host/M876.cpp>
HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp> HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp>
HAS_STATUS_MESSAGE = src_filter=+<src/gcode/lcd/M117.cpp> HAS_STATUS_MESSAGE = src_filter=+<src/gcode/lcd/M117.cpp>
HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp> HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp>
HAS_LCD_BRIGHTNESS = src_filter=+<src/gcode/lcd/M256.cpp>
HAS_BUZZER = src_filter=+<src/gcode/lcd/M300.cpp> HAS_BUZZER = src_filter=+<src/gcode/lcd/M300.cpp>
LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp> LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp> TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>

View File

@ -206,7 +206,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/host/M876.cpp> -<src/gcode/host/M876.cpp>
-<src/gcode/lcd/M0_M1.cpp> -<src/gcode/lcd/M0_M1.cpp>
-<src/gcode/lcd/M117.cpp> -<src/gcode/lcd/M117.cpp>
-<src/gcode/lcd/M250.cpp> -<src/gcode/lcd/M250.cpp> -<src/gcode/lcd/M256.cpp>
-<src/gcode/lcd/M300.cpp> -<src/gcode/lcd/M300.cpp>
-<src/gcode/lcd/M414.cpp> -<src/gcode/lcd/M414.cpp>
-<src/gcode/lcd/M73.cpp> -<src/gcode/lcd/M73.cpp>