diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index 1f295a65a5..363a5e5003 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -179,6 +179,9 @@ void manage_inactivity(bool ignore_stepper_queue=false);
   #define disable_e3() /* nothing */
 #endif
 
+void enable_all_steppers();
+void disable_all_steppers();
+
 enum AxisEnum {X_AXIS=0, Y_AXIS=1, A_AXIS=0, B_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
 //X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots.
 
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 46256b420f..bc6ea3c137 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -110,6 +110,7 @@
 //        Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include).
 //        The '#' is necessary when calling from within sd files, as it stops buffer prereading
 // M42  - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
+// M48  - Measure Z_Probe repeatability. M48 [n # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel]
 // M80  - Turn on Power Supply
 // M81  - Turn off Power Supply
 // M82  - Set E codes absolute (default)
@@ -2569,13 +2570,7 @@ inline void gcode_G92() {
  */
 inline void gcode_M17() {
   LCD_MESSAGEPGM(MSG_NO_MOVE);
-  enable_x();
-  enable_y();
-  enable_z();
-  enable_e0();
-  enable_e1();
-  enable_e2();
-  enable_e3();
+  enable_all_steppers();
 }
 
 #ifdef SDSUPPORT
@@ -3055,26 +3050,29 @@ inline void gcode_M104() {
 inline void gcode_M105() {
   if (setTargetedHotend(105)) return;
 
-  #if HAS_TEMP_0
-    SERIAL_PROTOCOLPGM("ok T:");
-    SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
-    SERIAL_PROTOCOLPGM(" /");
-    SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
+  #if HAS_TEMP_0 || HAS_TEMP_BED
+    SERIAL_PROTOCOLPGM("ok");
+    #if HAS_TEMP_0
+      SERIAL_PROTOCOLPGM(" T:");
+      SERIAL_PROTOCOL_F(degHotend(tmp_extruder), 1);
+      SERIAL_PROTOCOLPGM(" /");
+      SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder), 1);
+    #endif
     #if HAS_TEMP_BED
       SERIAL_PROTOCOLPGM(" B:");
-      SERIAL_PROTOCOL_F(degBed(),1);
+      SERIAL_PROTOCOL_F(degBed(), 1);
       SERIAL_PROTOCOLPGM(" /");
-      SERIAL_PROTOCOL_F(degTargetBed(),1);
-    #endif // HAS_TEMP_BED
-    for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
+      SERIAL_PROTOCOL_F(degTargetBed(), 1);
+    #endif
+    for (int8_t e = 0; e < EXTRUDERS; ++e) {
       SERIAL_PROTOCOLPGM(" T");
-      SERIAL_PROTOCOL(cur_extruder);
+      SERIAL_PROTOCOL(e);
       SERIAL_PROTOCOLPGM(":");
-      SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
+      SERIAL_PROTOCOL_F(degHotend(e), 1);
       SERIAL_PROTOCOLPGM(" /");
-      SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1);
+      SERIAL_PROTOCOL_F(degTargetHotend(e), 1);
     }
-  #else // !HAS_TEMP_0
+  #else // !HAS_TEMP_0 && !HAS_TEMP_BED
     SERIAL_ERROR_START;
     SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
   #endif
@@ -3112,7 +3110,7 @@ inline void gcode_M105() {
     }
   #endif
 
-  SERIAL_PROTOCOLLN("");
+  SERIAL_EOL;
 }
 
 #if HAS_FAN
@@ -3127,7 +3125,7 @@ inline void gcode_M105() {
    */
   inline void gcode_M107() { fanSpeed = 0; }
 
-#endif //FAN_PIN
+#endif // HAS_FAN
 
 /**
  * M109: Wait for extruder(s) to reach temperature
@@ -3185,10 +3183,10 @@ inline void gcode_M109() {
             SERIAL_PROTOCOLLN( timetemp );
           }
           else {
-            SERIAL_PROTOCOLLN( "?" );
+            SERIAL_PROTOCOLLNPGM("?");
           }
         #else
-          SERIAL_PROTOCOLLN("");
+          SERIAL_EOL;
         #endif
         timetemp = millis();
       }
@@ -3240,7 +3238,7 @@ inline void gcode_M109() {
         SERIAL_PROTOCOL((int)active_extruder);
         SERIAL_PROTOCOLPGM(" B:");
         SERIAL_PROTOCOL_F(degBed(), 1);
-        SERIAL_PROTOCOLLN("");
+        SERIAL_EOL;
       }
       manage_heater();
       manage_inactivity();
@@ -3441,27 +3439,26 @@ inline void gcode_M114() {
   SERIAL_PROTOCOLPGM(" Z:");
   SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]);
 
-  SERIAL_PROTOCOLLN("");
+  SERIAL_EOL;
 
   #ifdef SCARA
     SERIAL_PROTOCOLPGM("SCARA Theta:");
     SERIAL_PROTOCOL(delta[X_AXIS]);
     SERIAL_PROTOCOLPGM("   Psi+Theta:");
     SERIAL_PROTOCOL(delta[Y_AXIS]);
-    SERIAL_PROTOCOLLN("");
+    SERIAL_EOL;
     
     SERIAL_PROTOCOLPGM("SCARA Cal - Theta:");
     SERIAL_PROTOCOL(delta[X_AXIS]+home_offset[X_AXIS]);
     SERIAL_PROTOCOLPGM("   Psi+Theta (90):");
     SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+home_offset[Y_AXIS]);
-    SERIAL_PROTOCOLLN("");
+    SERIAL_EOL;
     
     SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:");
     SERIAL_PROTOCOL(delta[X_AXIS]/90*axis_steps_per_unit[X_AXIS]);
     SERIAL_PROTOCOLPGM("   Psi+Theta:");
     SERIAL_PROTOCOL((delta[Y_AXIS]-delta[X_AXIS])/90*axis_steps_per_unit[Y_AXIS]);
-    SERIAL_PROTOCOLLN("");
-    SERIAL_PROTOCOLLN("");
+    SERIAL_EOL; SERIAL_EOL;
   #endif
 }
 
@@ -3907,7 +3904,7 @@ inline void gcode_M226() {
       SERIAL_PROTOCOL(servo_index);
       SERIAL_PROTOCOL(": ");
       SERIAL_PROTOCOL(servos[servo_index].read());
-      SERIAL_PROTOCOLLN("");
+      SERIAL_EOL;
     }
   }
 
@@ -3975,7 +3972,7 @@ inline void gcode_M226() {
         //Kc does not have scaling applied above, or in resetting defaults
         SERIAL_PROTOCOL(PID_PARAM(Kc, e));
       #endif
-      SERIAL_PROTOCOLLN("");    
+      SERIAL_EOL;    
     }
     else {
       SERIAL_ECHO_START;
@@ -4000,7 +3997,7 @@ inline void gcode_M226() {
     SERIAL_PROTOCOL(unscalePID_i(bedKi));
     SERIAL_PROTOCOL(" d:");
     SERIAL_PROTOCOL(unscalePID_d(bedKd));
-    SERIAL_PROTOCOLLN("");
+    SERIAL_EOL;
   }
 
 #endif // PIDTEMPBED
@@ -4050,7 +4047,7 @@ inline void gcode_M226() {
     if (code_seen('C')) lcd_setcontrast(code_value_long() & 0x3F);
     SERIAL_PROTOCOLPGM("lcd contrast value: ");
     SERIAL_PROTOCOL(lcd_contrast);
-    SERIAL_PROTOCOLLN("");
+    SERIAL_EOL;
   }
 
 #endif // DOGLCD
@@ -4323,7 +4320,7 @@ inline void gcode_M503() {
         zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
         SERIAL_ECHO_START;
         SERIAL_ECHOLNPGM(MSG_ZPROBE_ZOFFSET " " MSG_OK);
-        SERIAL_PROTOCOLLN("");
+        SERIAL_EOL;
       }
       else {
         SERIAL_ECHO_START;
@@ -4332,14 +4329,14 @@ inline void gcode_M503() {
         SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN);
         SERIAL_ECHOPGM(MSG_Z_MAX);
         SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX);
-        SERIAL_PROTOCOLLN("");
+        SERIAL_EOL;
       }
     }
     else {
       SERIAL_ECHO_START;
       SERIAL_ECHOLNPGM(MSG_ZPROBE_ZOFFSET " : ");
       SERIAL_ECHO(-zprobe_zoffset);
-      SERIAL_PROTOCOLLN("");
+      SERIAL_EOL;
     }
   }
 
@@ -5693,7 +5690,17 @@ void handle_status_leds(void) {
 }
 #endif
 
-void disable_all_axes() {
+void enable_all_steppers() {
+  enable_x();
+  enable_y();
+  enable_z();
+  enable_e0();
+  enable_e1();
+  enable_e2();
+  enable_e3();
+}
+
+void disable_all_steppers() {
   disable_x();
   disable_y();
   disable_z();
@@ -5721,7 +5728,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
 
   if (stepper_inactive_time && ms > previous_millis_cmd + stepper_inactive_time
       && !ignore_stepper_queue && !blocks_queued())
-    disable_all_axes();
+    disable_all_steppers();
 
   #ifdef CHDK //Check if pin should be set to LOW after M240 set it to HIGH
     if (chdkActive && ms > chdkHigh + CHDK_DELAY) {
@@ -5809,7 +5816,7 @@ void kill()
   cli(); // Stop interrupts
   disable_heater();
 
-  disable_all_axes();
+  disable_all_steppers();
 
   #if HAS_POWER_SWITCH
     pinMode(PS_ON_PIN, INPUT);
diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp
index d7d33c170e..8d8d2e3c4e 100644
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@@ -614,7 +614,7 @@ float junction_deviation = 0.1;
         #if EXTRUDERS > 1
           case 1:
             enable_e1();
-            g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE*2;
+            g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE * 2;
             if (g_uc_extruder_last_move[0] == 0) disable_e0();
             #if EXTRUDERS > 2
               if (g_uc_extruder_last_move[2] == 0) disable_e2();
@@ -626,7 +626,7 @@ float junction_deviation = 0.1;
           #if EXTRUDERS > 2
             case 2:
               enable_e2();
-              g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE*2;
+              g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE * 2;
               if (g_uc_extruder_last_move[0] == 0) disable_e0();
               if (g_uc_extruder_last_move[1] == 0) disable_e1();
               #if EXTRUDERS > 3
@@ -636,7 +636,7 @@ float junction_deviation = 0.1;
             #if EXTRUDERS > 3
               case 3:
                 enable_e3();
-                g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2;
+                g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE * 2;
                 if (g_uc_extruder_last_move[0] == 0) disable_e0();
                 if (g_uc_extruder_last_move[1] == 0) disable_e1();
                 if (g_uc_extruder_last_move[2] == 0) disable_e2();
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 6f12bc9b22..ba4a4e9671 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -1127,13 +1127,7 @@ long st_get_position(uint8_t axis) {
 
 void finishAndDisableSteppers() {
   st_synchronize();
-  disable_x();
-  disable_y();
-  disable_z();
-  disable_e0();
-  disable_e1();
-  disable_e2();
-  disable_e3();
+  disable_all_steppers();
 }
 
 void quickStop() {
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index b59ff29df0..c0e427a655 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -1,5 +1,5 @@
 /*
-  temperature.c - temperature control
+  temperature.cpp - temperature control
   Part of Marlin
   
  Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,18 +16,7 @@
  
  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- This firmware is a mashup between Sprinter and grbl.
-  (https://github.com/kliment/Sprinter)
-  (https://github.com/simen/grbl/tree)
- 
- It has preliminary support for Matthew Roberts advance algorithm 
-    http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
-
- */
-
+*/
 
 #include "Marlin.h"
 #include "ultralcd.h"
@@ -87,14 +76,15 @@ unsigned char soft_pwm_bed;
 #define HAS_HEATER_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0)
 #define HAS_BED_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_BED_PERIOD) && THERMAL_RUNAWAY_PROTECTION_BED_PERIOD > 0 && TEMP_SENSOR_BED != 0)
 #if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
+  enum TRState { TRInactive, TRFirstHeating, TRStable };
   static bool thermal_runaway = false;
-  void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
+  void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
   #if HAS_HEATER_THERMAL_PROTECTION
-    static int thermal_runaway_state_machine[4]; // = {0,0,0,0};
+    static TRState thermal_runaway_state_machine[4] = { TRInactive, TRInactive, TRInactive, TRInactive };
     static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0};
   #endif
   #if HAS_BED_THERMAL_PROTECTION
-    static int thermal_runaway_bed_state_machine;
+    static TRState thermal_runaway_bed_state_machine = { TRInactive, TRInactive, TRInactive, TRInactive };
     static unsigned long thermal_runaway_bed_timer;
   #endif
 #endif
@@ -238,7 +228,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
     soft_pwm[extruder] = bias = d = PID_MAX / 2;
 
   // PID Tuning loop
-  for(;;) {
+  for (;;) {
 
     unsigned long ms = millis();
 
@@ -609,7 +599,7 @@ void manage_heater() {
   // Loop through all extruders
   for (int e = 0; e < EXTRUDERS; e++) {
 
-    #if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
+    #if HAS_HEATER_THERMAL_PROTECTION
       thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_RUNAWAY_PROTECTION_PERIOD, THERMAL_RUNAWAY_PROTECTION_HYSTERESIS);
     #endif
 
@@ -637,7 +627,7 @@ void manage_heater() {
         disable_heater();
         _temp_error(0, PSTR(MSG_EXTRUDER_SWITCHED_OFF), PSTR(MSG_ERR_REDUNDANT_TEMP));
       }
-    #endif //TEMP_SENSOR_1_AS_REDUNDANT
+    #endif // TEMP_SENSOR_1_AS_REDUNDANT
 
   } // Extruders Loop
 
@@ -656,7 +646,7 @@ void manage_heater() {
   #if TEMP_SENSOR_BED != 0
   
     #if HAS_BED_THERMAL_PROTECTION
-      thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, 9, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS);
+      thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS);
     #endif
 
     #ifdef PIDTEMPBED
@@ -1014,69 +1004,76 @@ void setWatch() {
 }
 
 #if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
-void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc)
-{
-/*
-      SERIAL_ECHO_START;
-      SERIAL_ECHO("Thermal Thermal Runaway Running. Heater ID:");
-      SERIAL_ECHO(heater_id);
-      SERIAL_ECHO(" ;  State:");
-      SERIAL_ECHO(*state);
-      SERIAL_ECHO(" ;  Timer:");
-      SERIAL_ECHO(*timer);
-      SERIAL_ECHO(" ;  Temperature:");
-      SERIAL_ECHO(temperature);
-      SERIAL_ECHO(" ;  Target Temp:");
-      SERIAL_ECHO(target_temperature);
-      SERIAL_ECHOLN("");    
-*/
-  if ((target_temperature == 0) || thermal_runaway)
-  {
-    *state = 0;
-    *timer = 0;
-    return;
-  }
-  switch (*state)
-  {
-    case 0: // "Heater Inactive" state
-      if (target_temperature > 0) *state = 1;
-      break;
-    case 1: // "First Heating" state
-      if (temperature >= target_temperature) *state = 2;
-      break;
-    case 2: // "Temperature Stable" state
-    {
-      unsigned long ms = millis();
-      if (temperature >= (target_temperature - hysteresis_degc))
-      {
-        *timer = ms;
-      } 
-      else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000)
-      {
-        SERIAL_ERROR_START;
-        SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
-        SERIAL_ERRORLN((int)heater_id);
-        LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); // translatable
-        thermal_runaway = true;
-        while(1)
-        {
-          disable_heater();
-          disable_x();
-          disable_y();
-          disable_z();
-          disable_e0();
-          disable_e1();
-          disable_e2();
-          disable_e3();
-          manage_heater();
-          lcd_update();
-        }
-      }
-    } break;
-  }
-}
-#endif //THERMAL_RUNAWAY_PROTECTION_PERIOD
 
+  void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) {
+
+    static int tr_target_temperature[EXTRUDERS+1];
+
+    /*
+        SERIAL_ECHO_START;
+        SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: ");
+        if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHOPGM(heater_id);
+        SERIAL_ECHOPGM(" ;  State:");
+        SERIAL_ECHOPGM(*state);
+        SERIAL_ECHOPGM(" ;  Timer:");
+        SERIAL_ECHOPGM(*timer);
+        SERIAL_ECHOPGM(" ;  Temperature:");
+        SERIAL_ECHOPGM(temperature);
+        SERIAL_ECHOPGM(" ;  Target Temp:");
+        SERIAL_ECHOPGM(target_temperature);
+        SERIAL_EOL;
+    */
+    if (target_temperature == 0 || thermal_runaway) {
+      *state = TRInactive;
+      *timer = 0;
+      return;
+    }
+
+    int heater_index = heater_id >= 0 ? heater_id : EXTRUDERS;
+
+    switch (*state) {
+      // Inactive state waits for a target temperature to be set
+      case TRInactive:
+        if (target_temperature > 0) {
+          *state = TRFirstHeating;
+          tr_target_temperature[heater_index] = target_temperature;
+        }
+        break;
+      // When first heating, wait for the temperature to be reached then go to Stable state
+      case TRFirstHeating:
+        if (temperature >= tr_target_temperature[heater_index]) *state = TRStable;
+        break;
+      // While the temperature is stable watch for a bad temperature
+      case TRStable:
+      {
+        // If the target temperature changes, restart
+        if (tr_target_temperature[heater_index] != target_temperature) {
+          *state = TRInactive;
+          break;
+        }
+
+        // If the temperature is over the target (-hysteresis) restart the timer
+        if (temperature >= tr_target_temperature[heater_index] - hysteresis_degc) *timer = millis();
+
+        // If the timer goes too long without a reset, trigger shutdown
+        else if (millis() > *timer + period_seconds * 1000UL) {
+          SERIAL_ERROR_START;
+          SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
+          if (heater_id < 0) SERIAL_ERRORLNPGM("bed"); else SERIAL_ERRORLN(heater_id);
+          LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY);
+          thermal_runaway = true;
+          for (;;) {
+            disable_heater();
+            disable_all_steppers();
+            manage_heater();
+            lcd_update();
+          }
+        }
+      } break;
+    }
+  }
+
+#endif // HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
 
 void disable_heater() {
   for (int i=0; i<EXTRUDERS; i++) setTargetHotend(0, i);
diff --git a/Marlin/temperature.h b/Marlin/temperature.h
index 15bd7fd0c1..847c41b009 100644
--- a/Marlin/temperature.h
+++ b/Marlin/temperature.h
@@ -18,8 +18,8 @@
   along with Grbl.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef temperature_h
-#define temperature_h 
+#ifndef TEMPERATURE_H
+#define TEMPERATURE_H 
 
 #include "Marlin.h"
 #include "planner.h"
@@ -105,40 +105,27 @@ FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_tempe
 FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { return target_temperature[extruder] < current_temperature[extruder]; }
 FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
 
-#define degHotend0() degHotend(0)
-#define degTargetHotend0() degTargetHotend(0)
-#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0)
-#define isHeatingHotend0() isHeatingHotend(0)
-#define isCoolingHotend0() isCoolingHotend(0)
+#define HOTEND_ROUTINES(NR) \
+  FORCE_INLINE float degHotend##NR() { return degHotend(NR); } \
+  FORCE_INLINE float degTargetHotend##NR() { return degTargetHotend(NR); } \
+  FORCE_INLINE void setTargetHotend##NR(const float c) { setTargetHotend(c, NR); } \
+  FORCE_INLINE bool isHeatingHotend##NR() { return isHeatingHotend(NR); } \
+  FORCE_INLINE bool isCoolingHotend##NR() { return isCoolingHotend(NR); }
+HOTEND_ROUTINES(0);
 #if EXTRUDERS > 1
-  #define degHotend1() degHotend(1)
-  #define degTargetHotend1() degTargetHotend(1)
-  #define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
-  #define isHeatingHotend1() isHeatingHotend(1)
-  #define isCoolingHotend1() isCoolingHotend(1)
+  HOTEND_ROUTINES(1);
 #else
-  #define setTargetHotend1(_celsius) do{}while(0)
+  #define setTargetHotend1(c) do{}while(0)
 #endif
 #if EXTRUDERS > 2
-  #define degHotend2() degHotend(2)
-  #define degTargetHotend2() degTargetHotend(2)
-  #define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
-  #define isHeatingHotend2() isHeatingHotend(2)
-  #define isCoolingHotend2() isCoolingHotend(2)
+  HOTEND_ROUTINES(2);
 #else
-  #define setTargetHotend2(_celsius) do{}while(0)
+  #define setTargetHotend2(c) do{}while(0)
 #endif
 #if EXTRUDERS > 3
-  #define degHotend3() degHotend(3)
-  #define degTargetHotend3() degTargetHotend(3)
-  #define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3)
-  #define isHeatingHotend3() isHeatingHotend(3)
-  #define isCoolingHotend3() isCoolingHotend(3)
+  HOTEND_ROUTINES(3);
 #else
-  #define setTargetHotend3(_celsius) do{}while(0)
-#endif
-#if EXTRUDERS > 4
-  #error Invalid number of extruders
+  #define setTargetHotend3(c) do{}while(0)
 #endif
 
 int getHeaterPower(int heater);
@@ -161,5 +148,4 @@ FORCE_INLINE void autotempShutdown() {
   #endif
 }
 
-
-#endif
+#endif // TEMPERATURE_H