Move L64XX index_to_axis to progmem (#16697)

This commit is contained in:
Scott Lahteine 2020-01-30 03:24:23 -06:00 committed by GitHub
parent 99b6a132bc
commit 50889c0f94
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
12 changed files with 539 additions and 405 deletions

View File

@ -291,7 +291,7 @@ void quickstop_stepper() {
}
void enable_e_steppers() {
#define _ENA_E(N) enable_E##N();
#define _ENA_E(N) ENABLE_AXIS_E##N();
REPEAT(E_STEPPERS, _ENA_E)
}
@ -299,28 +299,28 @@ void enable_all_steppers() {
#if ENABLED(AUTO_POWER_CONTROL)
powerManager.power_on();
#endif
enable_X();
enable_Y();
enable_Z();
ENABLE_AXIS_X();
ENABLE_AXIS_Y();
ENABLE_AXIS_Z();
enable_e_steppers();
}
void disable_e_steppers() {
#define _DIS_E(N) disable_E##N();
#define _DIS_E(N) DISABLE_AXIS_E##N();
REPEAT(E_STEPPERS, _DIS_E)
}
void disable_e_stepper(const uint8_t e) {
#define _CASE_DIS_E(N) case N: disable_E##N(); break;
#define _CASE_DIS_E(N) case N: DISABLE_AXIS_E##N(); break;
switch (e) {
REPEAT(EXTRUDERS, _CASE_DIS_E)
}
}
void disable_all_steppers() {
disable_X();
disable_Y();
disable_Z();
DISABLE_AXIS_X();
DISABLE_AXIS_Y();
DISABLE_AXIS_Z();
disable_e_steppers();
}
@ -461,13 +461,13 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
if (!already_shutdown_steppers) {
already_shutdown_steppers = true; // L6470 SPI will consume 99% of free time without this
#if ENABLED(DISABLE_INACTIVE_X)
disable_X();
DISABLE_AXIS_X();
#endif
#if ENABLED(DISABLE_INACTIVE_Y)
disable_Y();
DISABLE_AXIS_Y();
#endif
#if ENABLED(DISABLE_INACTIVE_Z)
disable_Z();
DISABLE_AXIS_Z();
#endif
#if ENABLED(DISABLE_INACTIVE_E)
disable_e_steppers();
@ -542,11 +542,11 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
#if ENABLED(SWITCHING_EXTRUDER)
bool oldstatus;
switch (active_extruder) {
default: oldstatus = E0_ENABLE_READ(); enable_E0(); break;
default: oldstatus = E0_ENABLE_READ(); ENABLE_AXIS_E0(); break;
#if E_STEPPERS > 1
case 2: case 3: oldstatus = E1_ENABLE_READ(); enable_E1(); break;
case 2: case 3: oldstatus = E1_ENABLE_READ(); ENABLE_AXIS_E1(); break;
#if E_STEPPERS > 2
case 4: case 5: oldstatus = E2_ENABLE_READ(); enable_E2(); break;
case 4: case 5: oldstatus = E2_ENABLE_READ(); ENABLE_AXIS_E2(); break;
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
}
@ -554,7 +554,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
bool oldstatus;
switch (active_extruder) {
default:
#define _CASE_EN(N) case N: oldstatus = E##N##_ENABLE_READ(); enable_E##N(); break;
#define _CASE_EN(N) case N: oldstatus = E##N##_ENABLE_READ(); ENABLE_AXIS_E##N(); break;
REPEAT(E_STEPPERS, _CASE_EN);
}
#endif

View File

@ -78,7 +78,7 @@ void Babystep::add_steps(const AxisEnum axis, const int16_t distance) {
#endif
#if ENABLED(BABYSTEP_ALWAYS_AVAILABLE)
#define BSA_ENABLE(AXIS) do{ switch (AXIS) { case X_AXIS: enable_X(); break; case Y_AXIS: enable_Y(); break; case Z_AXIS: enable_Z(); break; default: break; } }while(0)
#define BSA_ENABLE(AXIS) do{ switch (AXIS) { case X_AXIS: ENABLE_AXIS_X(); break; case Y_AXIS: ENABLE_AXIS_Y(); break; case Z_AXIS: ENABLE_AXIS_Z(); break; default: break; } }while(0)
#else
#define BSA_ENABLE(AXIS) NOOP
#endif

View File

@ -448,7 +448,7 @@ void MMU2::tool_change(uint8_t index) {
if (index != extruder) {
disable_E0();
DISABLE_AXIS_E0();
ui.status_printf_P(0, GET_TEXT(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
command(MMU_CMD_T0 + index);
@ -459,7 +459,7 @@ void MMU2::tool_change(uint8_t index) {
extruder = index; //filament change is finished
active_extruder = 0;
enable_E0();
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(extruder));
@ -497,13 +497,13 @@ void MMU2::tool_change(const char* special) {
case 'x': {
planner.synchronize();
uint8_t index = mmu2_choose_filament();
disable_E0();
DISABLE_AXIS_E0();
command(MMU_CMD_T0 + index);
manage_response(true, true);
command(MMU_CMD_C0);
mmu_loop();
enable_E0();
ENABLE_AXIS_E0();
extruder = index;
active_extruder = 0;
} break;
@ -697,7 +697,7 @@ void MMU2::filament_runout() {
LCD_MESSAGEPGM(MSG_MMU2_EJECTING_FILAMENT);
enable_E0();
ENABLE_AXIS_E0();
current_position.e -= MMU2_FILAMENTCHANGE_EJECT_FEED;
line_to_current_position(2500 / 60);
planner.synchronize();
@ -731,7 +731,7 @@ void MMU2::filament_runout() {
BUZZ(200, 404);
disable_E0();
DISABLE_AXIS_E0();
return true;
}
@ -776,7 +776,7 @@ void MMU2::filament_runout() {
void MMU2::execute_extruder_sequence(const E_Step * sequence, int steps) {
planner.synchronize();
enable_E0();
ENABLE_AXIS_E0();
const E_Step* step = sequence;
@ -794,7 +794,7 @@ void MMU2::filament_runout() {
step++;
}
disable_E0();
DISABLE_AXIS_E0();
}
#endif // HAS_LCD_MENU && MMU2_MENUS

View File

@ -439,7 +439,6 @@ void GcodeSuite::G33() {
_opposite_results = (_4p_calibration && !towers_set) || probe_points >= 3,
_endstop_results = probe_points != 1 && probe_points != -1 && probe_points != 0,
_angle_results = probe_points >= 3 && towers_set;
static const char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h";
int8_t iterations = 0;
float test_precision,
zero_std_dev = (verbose_level ? 999.0f : 0.0f), // 0.0 in dry-run mode : forced end
@ -625,8 +624,7 @@ void GcodeSuite::G33() {
sprintf_P(&mess[15], PSTR("%03i.x"), (int)LROUND(zero_std_dev_min));
ui.set_status(mess);
print_calibration_settings(_endstop_results, _angle_results);
serialprintPGM(save_message);
SERIAL_EOL();
SERIAL_ECHOLNPGM("Save with M500 and/or copy to Configuration.h");
}
else { // !end iterations
char mess[15];

View File

@ -34,9 +34,9 @@
*/
void GcodeSuite::M17() {
if (parser.seen("XYZE")) {
if (parser.seen('X')) enable_X();
if (parser.seen('Y')) enable_Y();
if (parser.seen('Z')) enable_Z();
if (parser.seen('X')) ENABLE_AXIS_X();
if (parser.seen('Y')) ENABLE_AXIS_Y();
if (parser.seen('Z')) ENABLE_AXIS_Z();
#if HAS_E_STEPPER_ENABLE
if (parser.seen('E')) enable_e_steppers();
#endif
@ -57,9 +57,9 @@ void GcodeSuite::M18_M84() {
else {
if (parser.seen("XYZE")) {
planner.synchronize();
if (parser.seen('X')) disable_X();
if (parser.seen('Y')) disable_Y();
if (parser.seen('Z')) disable_Z();
if (parser.seen('X')) DISABLE_AXIS_X();
if (parser.seen('Y')) DISABLE_AXIS_Y();
if (parser.seen('Z')) DISABLE_AXIS_Z();
#if HAS_E_STEPPER_ENABLE
if (parser.seen('E')) disable_e_steppers();
#endif

View File

@ -39,39 +39,40 @@ L64XX_Marlin L64xxManager;
void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR(" YES") : PSTR(" NO ")); }
char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "Z4", "E0", "E1", "E2", "E3", "E4", "E5", "E6", "E7" };
static const char str_X[] PROGMEM = "X ", str_Y[] PROGMEM = "Y ", str_Z[] PROGMEM = "Z ",
str_X2[] PROGMEM = "X2", str_Y2[] PROGMEM = "Y2",
str_Z2[] PROGMEM = "Z2", str_Z3[] PROGMEM = "Z3", str_Z4[] PROGMEM = "Z4",
str_E0[] PROGMEM = "E0", str_E1[] PROGMEM = "E1",
str_E2[] PROGMEM = "E2", str_E3[] PROGMEM = "E3",
str_E4[] PROGMEM = "E4", str_E5[] PROGMEM = "E5",
str_E6[] PROGMEM = "E6", str_E7[] PROGMEM = "E7"
;
PGM_P const L64XX_Marlin::index_to_axis[] PROGMEM = {
str_X, str_Y, str_Z, str_X2, str_Y2, str_Z2, str_Z3, str_Z4,
str_E0, str_E1, str_E2, str_E3, str_E4, str_E5, str_E6, str_E7
};
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../core/debug_out.h"
uint8_t L64XX_Marlin::dir_commands[MAX_L64XX]; // array to hold direction command for each driver
uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = { (INVERT_X_DIR), // 0 X
(INVERT_Y_DIR), // 1 Y
(INVERT_Z_DIR), // 2 Z
#if ENABLED(X_DUAL_STEPPER_DRIVERS) // 3 X2
(INVERT_X_DIR) ^ (INVERT_X2_VS_X_DIR),
#else
(INVERT_X_DIR),
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS) // 4 Y2
(INVERT_Y_DIR) ^ (INVERT_Y2_VS_Y_DIR),
#else
(INVERT_Y_DIR),
#endif
(INVERT_Z_DIR), // 5 Z2
(INVERT_Z_DIR), // 6 Z3
(INVERT_Z_DIR), // 7 Z4
const uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = {
INVERT_X_DIR, INVERT_Y_DIR, INVERT_Z_DIR
, (INVERT_X_DIR) // X2
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
^ (INVERT_X2_VS_X_DIR)
#endif
, (INVERT_Y_DIR) // Y2
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
^ (INVERT_Y2_VS_Y_DIR)
#endif
, INVERT_Z_DIR, INVERT_Z_DIR, INVERT_Z_DIR // Z2,Z3,Z4
(INVERT_E0_DIR), // 8 E0
(INVERT_E1_DIR), // 9 E1
(INVERT_E2_DIR), // 10 E2
(INVERT_E3_DIR), // 11 E3
(INVERT_E4_DIR), // 12 E4
(INVERT_E5_DIR), // 13 E5
(INVERT_E6_DIR), // 14 E6
(INVERT_E7_DIR) // 15 E7
};
, INVERT_E0_DIR, INVERT_E1_DIR, INVERT_E2_DIR, INVERT_E3_DIR
, INVERT_E4_DIR, INVERT_E5_DIR, INVERT_E6_DIR, INVERT_E7_DIR
};
volatile uint8_t L64XX_Marlin::spi_abort = false;
uint8_t L64XX_Marlin::spi_active = false;
@ -379,35 +380,27 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
found_displacement = true;
displacement = _displacement;
uint8_t axis_offset = parser.byteval('J');
axis_mon[0][0] = axis_codes[i]; // axis ASCII value (target character)
axis_mon[0][0] = axis_codes[i]; // Axis first character, one of XYZE
const bool single_or_e = axis_offset >= 2 || axis_mon[0][0] == 'E',
one_or_more = !single_or_e && axis_offset == 0;
uint8_t driver_count_local = 0; // Can't use "driver_count" directly as a subscript because it's passed by reference
if (axis_offset >= 2 || axis_mon[0][0] == 'E') { // Single axis, E0, or E1
axis_mon[0][1] = axis_offset + '0';
for (j = 0; j < MAX_L64XX; j++) { // See how many drivers on this axis
const char * const str = index_to_axis[j];
if (axis_mon[0][0] == str[0]) {
char * const mon = axis_mon[driver_count_local];
mon[0] = str[0];
mon[1] = str[1];
mon[2] = str[2]; // append end of string
axis_index[driver_count_local] = (L64XX_axis_t)j; // set axis index
if (single_or_e) // Single axis, E0, or E1
axis_mon[0][1] = axis_offset + '0'; // Index given by 'J' parameter
if (single_or_e || one_or_more) {
for (j = 0; j < MAX_L64XX; j++) { // Count up the drivers on this axis
PGM_P str = (PGM_P)pgm_read_ptr(&index_to_axis[j]); // Get a PGM_P from progmem
const char c = pgm_read_byte(str); // Get a char from progmem
if (axis_mon[0][0] == c) { // For each stepper on this axis...
char *mon = axis_mon[driver_count_local];
*mon++ = c; // Copy the 3 letter axis name
*mon++ = pgm_read_byte(&str[1]); // to the axis_mon array
*mon = pgm_read_byte(&str[2]);
axis_index[driver_count_local] = (L64XX_axis_t)j; // And store the L64XX axis index
driver_count_local++;
}
}
}
else if (axis_offset == 0) { // One or more axes
for (j = 0; j < MAX_L64XX; j++) { // See how many drivers on this axis
const char * const str = index_to_axis[j];
if (axis_mon[0][0] == str[0]) {
char * const mon = axis_mon[driver_count_local];
mon[0] = str[0];
mon[1] = str[1];
mon[2] = str[2]; // append end of string
axis_index[driver_count_local] = (L64XX_axis_t)j; // set axis index
driver_count_local++;
}
}
driver_count = driver_count_local;
if (one_or_more) driver_count = driver_count_local;
}
break; // only take first axis found
}
@ -494,8 +487,8 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
for (uint8_t k = 0; k < driver_count; k++) {
uint8_t not_found = true;
for (j = 1; j <= L64XX::chain[0]; j++) {
const char * const ind_axis = index_to_axis[L64XX::chain[j]];
if (ind_axis[0] == axis_mon[k][0] && ind_axis[1] == axis_mon[k][1]) { // See if a L6470 driver
PGM_P const str = (PGM_P)pgm_read_ptr(&index_to_axis[L64XX::chain[j]]);
if (pgm_read_byte(&str[0]) == axis_mon[k][0] && pgm_read_byte(&str[1]) == axis_mon[k][1]) { // See if a L6470 driver
not_found = false;
break;
}
@ -724,7 +717,8 @@ void L64XX_Marlin::say_axis(const L64XX_axis_t axis, const uint8_t label/*=true*
};
void L64XX_Marlin::append_stepper_err(char* &p, const uint8_t stepper_index, const char * const err/*=nullptr*/) {
p += sprintf_P(p, PSTR("Stepper %c%c "), index_to_axis[stepper_index][0], index_to_axis[stepper_index][1]);
PGM_P const str = (PGM_P)pgm_read_ptr(&index_to_axis[stepper_index]);
p += sprintf_P(p, PSTR("Stepper %c%c "), pgm_read_byte(&str[0]), pgm_read_byte(&str[1]));
if (err) p += sprintf_P(p, err);
}

View File

@ -39,9 +39,10 @@ enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E
class L64XX_Marlin : public L64XXHelper {
public:
static char index_to_axis[MAX_L64XX][3];
static PGM_P const index_to_axis[MAX_L64XX];
static const uint8_t index_to_dir[MAX_L64XX];
static uint8_t index_to_dir[MAX_L64XX];
static uint8_t dir_commands[MAX_L64XX];
// Flags to guarantee graceful switch if stepper interrupts L6470 SPI transfer
@ -69,7 +70,6 @@ public:
static void transfer(uint8_t L6470_buf[], const uint8_t length);
//static char* index_to_axis(const uint8_t index);
static void say_axis(const L64XX_axis_t axis, const uint8_t label=true);
#if ENABLED(L6470_CHITCHAT)
static void error_status_decode(

View File

@ -1252,13 +1252,13 @@ void Planner::check_axes_activity() {
// Disable inactive axes
//
#if ENABLED(DISABLE_X)
if (!axis_active.x) disable_X();
if (!axis_active.x) DISABLE_AXIS_X();
#endif
#if ENABLED(DISABLE_Y)
if (!axis_active.y) disable_Y();
if (!axis_active.y) DISABLE_AXIS_Y();
#endif
#if ENABLED(DISABLE_Z)
if (!axis_active.z) disable_Z();
if (!axis_active.z) DISABLE_AXIS_Z();
#endif
#if ENABLED(DISABLE_E)
if (!axis_active.e) disable_e_steppers();
@ -1905,29 +1905,29 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
// Enable active axes
#if CORE_IS_XY
if (block->steps.a || block->steps.b) {
enable_X();
enable_Y();
ENABLE_AXIS_X();
ENABLE_AXIS_Y();
}
#if DISABLED(Z_LATE_ENABLE)
if (block->steps.z) enable_Z();
if (block->steps.z) ENABLE_AXIS_Z();
#endif
#elif CORE_IS_XZ
if (block->steps.a || block->steps.c) {
enable_X();
enable_Z();
ENABLE_AXIS_X();
ENABLE_AXIS_Z();
}
if (block->steps.y) enable_Y();
if (block->steps.y) ENABLE_AXIS_Y();
#elif CORE_IS_YZ
if (block->steps.b || block->steps.c) {
enable_Y();
enable_Z();
ENABLE_AXIS_Y();
ENABLE_AXIS_Z();
}
if (block->steps.x) enable_X();
if (block->steps.x) ENABLE_AXIS_X();
#else
if (block->steps.x) enable_X();
if (block->steps.y) enable_Y();
if (block->steps.x) ENABLE_AXIS_X();
if (block->steps.y) ENABLE_AXIS_Y();
#if DISABLED(Z_LATE_ENABLE)
if (block->steps.z) enable_Z();
if (block->steps.z) ENABLE_AXIS_Z();
#endif
#endif
@ -1945,27 +1945,27 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#if HAS_DUPLICATION_MODE
if (extruder_duplication_enabled && extruder == 0) {
enable_E1();
ENABLE_AXIS_E1();
g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2;
}
#endif
#define ENABLE_ONE_E(N) do{ \
if (extruder == N) { \
enable_E##N(); \
ENABLE_AXIS_E##N(); \
g_uc_extruder_last_move[N] = (BLOCK_BUFFER_SIZE) * 2; \
} \
else if (!g_uc_extruder_last_move[N]) \
disable_E##N(); \
DISABLE_AXIS_E##N(); \
}while(0);
#else
#define ENABLE_ONE_E(N) enable_E##N();
#define ENABLE_ONE_E(N) ENABLE_AXIS_E##N();
#endif
REPEAT(EXTRUDERS, ENABLE_ONE_E);
REPEAT(EXTRUDERS, ENABLE_ONE_E); // (ENABLE_ONE_E must end with semicolon)
}
#endif // EXTRUDERS

View File

@ -251,7 +251,7 @@ xyz_pos_t probe_offset; // Initialized by settings.load()
#if ENABLED(PROBING_STEPPERS_OFF)
disable_e_steppers();
#if NONE(DELTA, HOME_AFTER_DEACTIVATE)
disable_X(); disable_Y();
DISABLE_AXIS_X(); DISABLE_AXIS_Y();
#endif
#endif
if (p) safe_delay(

View File

@ -1927,7 +1927,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
// If delayed Z enable, enable it now. This option will severely interfere with
// timing between pulses when chaining motion between blocks, and it could lead
// to lost steps in both X and Y axis, so avoid using it unless strictly necessary!!
if (current_block->steps.z) enable_Z();
if (current_block->steps.z) ENABLE_AXIS_Z();
#endif
// Mark the time_nominal as not calculated yet
@ -2215,12 +2215,12 @@ void Stepper::init() {
#define _STEP_INIT(AXIS) AXIS ##_STEP_INIT()
#define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW)
#define _DISABLE(AXIS) disable_## AXIS()
#define _DISABLE_AXIS(AXIS) DISABLE_AXIS_## AXIS()
#define AXIS_INIT(AXIS, PIN) \
_STEP_INIT(AXIS); \
_WRITE_STEP(AXIS, _INVERT_STEP_PIN(PIN)); \
_DISABLE(AXIS)
_DISABLE_AXIS(AXIS)
#define E_AXIS_INIT(NUM) AXIS_INIT(E## NUM, E)
@ -2437,7 +2437,7 @@ void Stepper::report_positions() {
#endif
#define EXTRA_CYCLES_BABYSTEP (STEP_PULSE_CYCLES - (CYCLES_EATEN_BABYSTEP))
#define _ENABLE(AXIS) enable_## AXIS()
#define _ENABLE_AXIS(AXIS) ENABLE_AXIS_## AXIS()
#define _READ_DIR(AXIS) AXIS ##_DIR_READ()
#define _INVERT_DIR(AXIS) INVERT_## AXIS ##_DIR
#define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true)
@ -2460,7 +2460,7 @@ void Stepper::report_positions() {
#define BABYSTEP_AXIS(AXIS, INVERT, DIR) { \
const uint8_t old_dir = _READ_DIR(AXIS); \
_ENABLE(AXIS); \
_ENABLE_AXIS(AXIS); \
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY); \
_APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INVERT); \
DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY); \
@ -2523,9 +2523,9 @@ void Stepper::report_positions() {
const bool z_direction = direction ^ BABYSTEP_INVERT_Z;
enable_X();
enable_Y();
enable_Z();
ENABLE_AXIS_X();
ENABLE_AXIS_Y();
ENABLE_AXIS_Z();
#if MINIMUM_STEPPER_PRE_DIR_DELAY > 0
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY);

View File

@ -55,6 +55,9 @@
#define X_DIR_INIT() NOOP
#define X_DIR_WRITE(STATE) L64XX_DIR_WRITE(X, STATE)
#define X_DIR_READ() (stepper##X.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_X(L6470)
#define DISABLE_STEPPER_X() stepperX.free()
#endif
#endif
#endif
@ -72,6 +75,9 @@
#define Y_DIR_INIT() NOOP
#define Y_DIR_WRITE(STATE) L64XX_DIR_WRITE(Y, STATE)
#define Y_DIR_READ() (stepper##Y.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_Y(L6470)
#define DISABLE_STEPPER_Y() stepperY.free()
#endif
#endif
#endif
@ -89,6 +95,9 @@
#define Z_DIR_INIT() NOOP
#define Z_DIR_WRITE(STATE) L64XX_DIR_WRITE(Z, STATE)
#define Z_DIR_READ() (stepper##Z.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_Z(L6470)
#define DISABLE_STEPPER_Z() stepperZ.free()
#endif
#endif
#endif
@ -109,6 +118,10 @@
#endif
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
#define DISABLE_STEPPER_X2() stepperX2.free()
#endif
// Y2 Stepper
#if HAS_Y2_ENABLE && AXIS_IS_L64XX(Y2)
extern L64XX_CLASS(Y2) stepperY2;
@ -126,6 +139,10 @@
#endif
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
#define DISABLE_STEPPER_Y2() stepperY2.free()
#endif
// Z2 Stepper
#if HAS_Z2_ENABLE && AXIS_IS_L64XX(Z2)
extern L64XX_CLASS(Z2) stepperZ2;
@ -143,6 +160,10 @@
#endif
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
#define DISABLE_STEPPER_Z2() stepperZ2.free()
#endif
// Z3 Stepper
#if HAS_Z3_ENABLE && AXIS_IS_L64XX(Z3)
extern L64XX_CLASS(Z3) stepperZ3;
@ -160,6 +181,10 @@
#endif
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
#define DISABLE_STEPPER_Z3() stepperZ3.free()
#endif
// Z4 Stepper
#if HAS_Z4_ENABLE && AXIS_IS_L64XX(Z4)
extern L64XX_CLASS(Z4) stepperZ4;
@ -177,6 +202,10 @@
#endif
#endif
#if AXIS_DRIVER_TYPE_Z4(L6470)
#define DISABLE_STEPPER_Z4() stepperZ4.free()
#endif
// E0 Stepper
#if AXIS_IS_L64XX(E0)
extern L64XX_CLASS(E0) stepperE0;
@ -191,6 +220,9 @@
#define E0_DIR_INIT() NOOP
#define E0_DIR_WRITE(STATE) L64XX_DIR_WRITE(E0, STATE)
#define E0_DIR_READ() (stepper##E0.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E0(L6470)
#define DISABLE_STEPPER_E0() do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -208,6 +240,9 @@
#define E1_DIR_INIT() NOOP
#define E1_DIR_WRITE(STATE) L64XX_DIR_WRITE(E1, STATE)
#define E1_DIR_READ() (stepper##E1.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E1(L6470)
#define DISABLE_STEPPER_E1() do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -225,6 +260,9 @@
#define E2_DIR_INIT() NOOP
#define E2_DIR_WRITE(STATE) L64XX_DIR_WRITE(E2, STATE)
#define E2_DIR_READ() (stepper##E2.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E2(L6470)
#define DISABLE_STEPPER_E2() do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -259,6 +297,9 @@
#define E4_DIR_INIT() NOOP
#define E4_DIR_WRITE(STATE) L64XX_DIR_WRITE(E4, STATE)
#define E4_DIR_READ() (stepper##E4.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E4(L6470)
#define DISABLE_STEPPER_E4() do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -276,6 +317,9 @@
#define E5_DIR_INIT() NOOP
#define E5_DIR_WRITE(STATE) L64XX_DIR_WRITE(E5, STATE)
#define E5_DIR_READ() (stepper##E5.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E5(L6470)
#define DISABLE_STEPPER_E5() do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -293,6 +337,9 @@
#define E6_DIR_INIT() NOOP
#define E6_DIR_WRITE(STATE) L64XX_DIR_WRITE(E6, STATE)
#define E6_DIR_READ() (stepper##E6.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E6(L6470)
#define DISABLE_STEPPER_E6() do{ stepperE6.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif
@ -310,5 +357,8 @@
#define E7_DIR_INIT() NOOP
#define E7_DIR_WRITE(STATE) L64XX_DIR_WRITE(E7, STATE)
#define E7_DIR_READ() (stepper##E7.getStatus() & STATUS_DIR);
#if AXIS_DRIVER_TYPE_E7(L6470)
#define DISABLE_STEPPER_E7() do{ stepperE7.free(); CBI(axis_known_position, E_AXIS); }while(0)
#endif
#endif
#endif

View File

@ -594,320 +594,412 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
//
// X, Y, Z Stepper enable / disable
//
#if AXIS_DRIVER_TYPE_X(L6470)
extern L6470 stepperX;
#define X_enable() NOOP
#define X_disable() stepperX.free()
#elif HAS_X_ENABLE
#define X_enable() X_ENABLE_WRITE( X_ENABLE_ON)
#define X_disable() X_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X_enable() NOOP
#define X_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
extern L6470 stepperX2;
#define X2_enable() NOOP
#define X2_disable() stepperX2.free()
#elif HAS_X2_ENABLE
#define X2_enable() X2_ENABLE_WRITE( X_ENABLE_ON)
#define X2_disable() X2_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X2_enable() NOOP
#define X2_disable() NOOP
#endif
#define enable_X() do{ X_enable(); X2_enable(); }while(0)
#define disable_X() do{ X_disable(); X2_disable(); CBI(axis_known_position, X_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Y(L6470)
extern L6470 stepperY;
#define Y_enable() NOOP
#define Y_disable() stepperY.free()
#elif HAS_Y_ENABLE
#define Y_enable() Y_ENABLE_WRITE( Y_ENABLE_ON)
#define Y_disable() Y_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y_enable() NOOP
#define Y_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
extern L6470 stepperY2;
#define Y2_enable() NOOP
#define Y2_disable() stepperY2.free()
#elif HAS_Y2_ENABLE
#define Y2_enable() Y2_ENABLE_WRITE( Y_ENABLE_ON)
#define Y2_disable() Y2_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y2_enable() NOOP
#define Y2_disable() NOOP
#endif
#define enable_Y() do{ Y_enable(); Y2_enable(); }while(0)
#define disable_Y() do{ Y_disable(); Y2_disable(); CBI(axis_known_position, Y_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Z(L6470)
extern L6470 stepperZ;
#define Z_enable() NOOP
#define Z_disable() stepperZ.free()
#elif HAS_Z_ENABLE
#define Z_enable() Z_ENABLE_WRITE( Z_ENABLE_ON)
#define Z_disable() Z_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z_enable() NOOP
#define Z_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
extern L6470 stepperZ2;
#define Z2_enable() NOOP
#define Z2_disable() stepperZ2.free()
#elif HAS_Z2_ENABLE
#define Z2_enable() Z2_ENABLE_WRITE( Z_ENABLE_ON)
#define Z2_disable() Z2_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z2_enable() NOOP
#define Z2_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
extern L6470 stepperZ3;
#define Z3_enable() NOOP
#define Z3_disable() stepperZ3.free()
#elif HAS_Z3_ENABLE
#define Z3_enable() Z3_ENABLE_WRITE( Z_ENABLE_ON)
#define Z3_disable() Z3_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z3_enable() NOOP
#define Z3_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Z4(L6470)
extern L6470 stepperZ4;
#define Z4_enable() NOOP
#define Z4_disable() stepperZ4.free()
#elif HAS_Z4_ENABLE
#define Z4_enable() Z4_ENABLE_WRITE( Z_ENABLE_ON)
#define Z4_disable() Z4_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z4_enable() NOOP
#define Z4_disable() NOOP
#endif
#define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); Z4_enable(); }while(0)
#define disable_Z() do{ Z_disable(); Z2_disable(); Z3_disable(); Z4_disable(); CBI(axis_known_position, Z_AXIS); }while(0)
//
// Extruder Stepper enable / disable
// Individual stepper enable / disable macros
//
// define the individual enables/disables
#if AXIS_DRIVER_TYPE_E0(L6470)
extern L6470 stepperE0;
#define E0_enable() NOOP
#define E0_disable() do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif HAS_E0_ENABLE
#define E0_enable() E0_ENABLE_WRITE( E_ENABLE_ON)
#define E0_disable() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E0_enable() NOOP
#define E0_disable() NOOP
#ifndef ENABLE_STEPPER_X
#if HAS_X_ENABLE
#define ENABLE_STEPPER_X() X_ENABLE_WRITE( X_ENABLE_ON)
#else
#define ENABLE_STEPPER_X() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_X
#if HAS_X_ENABLE
#define DISABLE_STEPPER_X() X_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define DISABLE_STEPPER_X() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
extern L6470 stepperE1;
#define E1_enable() NOOP
#define E1_disable() do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 1 && HAS_E1_ENABLE
#define E1_enable() E1_ENABLE_WRITE( E_ENABLE_ON)
#define E1_disable() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E1_enable() NOOP
#define E1_disable() NOOP
#ifndef ENABLE_STEPPER_X2
#if HAS_X2_ENABLE
#define ENABLE_STEPPER_X2() X2_ENABLE_WRITE( X_ENABLE_ON)
#else
#define ENABLE_STEPPER_X2() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_X2
#if HAS_X2_ENABLE
#define DISABLE_STEPPER_X2() X2_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define DISABLE_STEPPER_X2() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
extern L6470 stepperE2;
#define E2_enable() NOOP
#define E2_disable() do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 2 && HAS_E2_ENABLE
#define E2_enable() E2_ENABLE_WRITE( E_ENABLE_ON)
#define E2_disable() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E2_enable() NOOP
#define E2_disable() NOOP
#ifndef ENABLE_STEPPER_Y
#if HAS_Y_ENABLE
#define ENABLE_STEPPER_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
#else
#define ENABLE_STEPPER_Y() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Y
#if HAS_Y_ENABLE
#define DISABLE_STEPPER_Y() Y_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define DISABLE_STEPPER_Y() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
extern L6470 stepperE3;
#define E3_enable() NOOP
#define E3_disable() do{ stepperE3.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 3 && HAS_E3_ENABLE
#define E3_enable() E3_ENABLE_WRITE( E_ENABLE_ON)
#define E3_disable() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E3_enable() NOOP
#define E3_disable() NOOP
#ifndef ENABLE_STEPPER_Y2
#if HAS_Y2_ENABLE
#define ENABLE_STEPPER_Y2() Y2_ENABLE_WRITE( Y_ENABLE_ON)
#else
#define ENABLE_STEPPER_Y2() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Y2
#if HAS_Y2_ENABLE
#define DISABLE_STEPPER_Y2() Y2_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define DISABLE_STEPPER_Y2() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
extern L6470 stepperE4;
#define E4_enable() NOOP
#define E4_disable() do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 4 && HAS_E4_ENABLE
#define E4_enable() E4_ENABLE_WRITE( E_ENABLE_ON)
#define E4_disable() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E4_enable() NOOP
#define E4_disable() NOOP
#ifndef ENABLE_STEPPER_Z
#if HAS_Z_ENABLE
#define ENABLE_STEPPER_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
#else
#define ENABLE_STEPPER_Z() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Z
#if HAS_Z_ENABLE
#define DISABLE_STEPPER_Z() Z_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define DISABLE_STEPPER_Z() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
extern L6470 stepperE5;
#define E5_enable() NOOP
#define E5_disable() do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 5 && HAS_E5_ENABLE
#define E5_enable() E5_ENABLE_WRITE( E_ENABLE_ON)
#define E5_disable() E5_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E5_enable() NOOP
#define E5_disable() NOOP
#ifndef ENABLE_STEPPER_Z2
#if HAS_Z2_ENABLE
#define ENABLE_STEPPER_Z2() Z2_ENABLE_WRITE( Z_ENABLE_ON)
#else
#define ENABLE_STEPPER_Z2() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Z2
#if HAS_Z2_ENABLE
#define DISABLE_STEPPER_Z2() Z2_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define DISABLE_STEPPER_Z2() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E6(L6470)
extern L6470 stepperE6;
#define E6_enable() NOOP
#define E6_disable() do{ stepperE6.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 6 && HAS_E6_ENABLE
#define E6_enable() E6_ENABLE_WRITE( E_ENABLE_ON)
#define E6_disable() E6_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E6_enable() NOOP
#define E6_disable() NOOP
#ifndef ENABLE_STEPPER_Z3
#if HAS_Z3_ENABLE
#define ENABLE_STEPPER_Z3() Z3_ENABLE_WRITE( Z_ENABLE_ON)
#else
#define ENABLE_STEPPER_Z3() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Z3
#if HAS_Z3_ENABLE
#define DISABLE_STEPPER_Z3() Z3_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define DISABLE_STEPPER_Z3() NOOP
#endif
#endif
#if AXIS_DRIVER_TYPE_E7(L6470)
extern L6470 stepperE7;
#define E7_enable() NOOP
#define E7_disable() do{ stepperE7.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 7 && HAS_E7_ENABLE
#define E7_enable() E7_ENABLE_WRITE( E_ENABLE_ON)
#define E7_disable() E7_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E7_enable() NOOP
#define E7_disable() NOOP
#ifndef ENABLE_STEPPER_Z4
#if HAS_Z4_ENABLE
#define ENABLE_STEPPER_Z4() Z4_ENABLE_WRITE( Z_ENABLE_ON)
#else
#define ENABLE_STEPPER_Z4() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_Z4
#if HAS_Z4_ENABLE
#define DISABLE_STEPPER_Z4() Z4_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define DISABLE_STEPPER_Z4() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E0
#if HAS_E0_ENABLE
#define ENABLE_STEPPER_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E0() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E0
#if HAS_E0_ENABLE
#define DISABLE_STEPPER_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E0() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E1
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define ENABLE_STEPPER_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E1() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E1
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define DISABLE_STEPPER_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E1() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E2
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define ENABLE_STEPPER_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E2() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E2
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define DISABLE_STEPPER_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E2() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E3
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define ENABLE_STEPPER_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E3() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E3
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define DISABLE_STEPPER_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E3() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E4
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define ENABLE_STEPPER_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E4() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E4
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define DISABLE_STEPPER_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E4() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E5
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define ENABLE_STEPPER_E5() E5_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E5() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E5
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define DISABLE_STEPPER_E5() E5_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E5() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E6
#if E_STEPPERS > 6 && HAS_E6_ENABLE
#define ENABLE_STEPPER_E6() E6_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E6() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E6
#if E_STEPPERS > 6 && HAS_E6_ENABLE
#define DISABLE_STEPPER_E6() E6_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E6() NOOP
#endif
#endif
#ifndef ENABLE_STEPPER_E7
#if E_STEPPERS > 7 && HAS_E7_ENABLE
#define ENABLE_STEPPER_E7() E7_ENABLE_WRITE( E_ENABLE_ON)
#else
#define ENABLE_STEPPER_E7() NOOP
#endif
#endif
#ifndef DISABLE_STEPPER_E7
#if E_STEPPERS > 7 && HAS_E7_ENABLE
#define DISABLE_STEPPER_E7() E7_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define DISABLE_STEPPER_E7() NOOP
#endif
#endif
//
// Axis steppers enable / disable macros
//
#define ENABLE_AXIS_X() do{ ENABLE_STEPPER_X(); ENABLE_STEPPER_X2(); }while(0)
#define DISABLE_AXIS_X() do{ DISABLE_STEPPER_X(); DISABLE_STEPPER_X2(); CBI(axis_known_position, X_AXIS); }while(0)
#define ENABLE_AXIS_Y() do{ ENABLE_STEPPER_Y(); ENABLE_STEPPER_Y2(); }while(0)
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); CBI(axis_known_position, Y_AXIS); }while(0)
#define ENABLE_AXIS_Z() do{ ENABLE_STEPPER_Z(); ENABLE_STEPPER_Z2(); ENABLE_STEPPER_Z3(); ENABLE_STEPPER_Z4(); }while(0)
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); CBI(axis_known_position, Z_AXIS); }while(0)
//
// Extruder steppers enable / disable macros
//
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
* Mixing steppers keep all their enable (and direction) states synchronized
*/
#if MIXING_STEPPERS > 7
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); E7_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); E7_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); ENABLE_STEPPER_E3(); ENABLE_STEPPER_E4(); ENABLE_STEPPER_E5(); ENABLE_STEPPER_E6(); ENABLE_STEPPER_E7(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); DISABLE_STEPPER_E3(); DISABLE_STEPPER_E4(); DISABLE_STEPPER_E5(); DISABLE_STEPPER_E6(); DISABLE_STEPPER_E7(); }
#elif MIXING_STEPPERS > 6
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); ENABLE_STEPPER_E3(); ENABLE_STEPPER_E4(); ENABLE_STEPPER_E5(); ENABLE_STEPPER_E6(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); DISABLE_STEPPER_E3(); DISABLE_STEPPER_E4(); DISABLE_STEPPER_E5(); DISABLE_STEPPER_E6(); }
#elif MIXING_STEPPERS > 5
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); ENABLE_STEPPER_E3(); ENABLE_STEPPER_E4(); ENABLE_STEPPER_E5(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); DISABLE_STEPPER_E3(); DISABLE_STEPPER_E4(); DISABLE_STEPPER_E5(); }
#elif MIXING_STEPPERS > 4
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); ENABLE_STEPPER_E3(); ENABLE_STEPPER_E4(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); DISABLE_STEPPER_E3(); DISABLE_STEPPER_E4(); }
#elif MIXING_STEPPERS > 3
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); ENABLE_STEPPER_E3(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); DISABLE_STEPPER_E3(); }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); }
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); ENABLE_STEPPER_E2(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); DISABLE_STEPPER_E2(); }
#else
#define enable_E0() { E0_enable(); E1_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#define enable_E5() NOOP
#define disable_E5() NOOP
#define enable_E6() NOOP
#define disable_E6() NOOP
#define enable_E7() NOOP
#define disable_E7() NOOP
#else // !MIXING_EXTRUDER
#if HAS_E0_ENABLE
#define enable_E0() E0_enable()
#define disable_E0() E0_disable()
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define enable_E1() E1_enable()
#define disable_E1() E1_disable()
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define enable_E2() E2_enable()
#define disable_E2() E2_disable()
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define enable_E3() E3_enable()
#define disable_E3() E3_disable()
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define enable_E4() E4_enable()
#define disable_E4() E4_disable()
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define enable_E5() E5_enable()
#define disable_E5() E5_disable()
#else
#define enable_E5() NOOP
#define disable_E5() NOOP
#endif
#if E_STEPPERS > 6 && HAS_E6_ENABLE
#define enable_E6() E6_enable()
#define disable_E6() E6_disable()
#else
#define enable_E6() NOOP
#define disable_E6() NOOP
#endif
#if E_STEPPERS > 7 && HAS_E7_ENABLE
#define enable_E7() E7_enable()
#define disable_E7() E7_disable()
#else
#define enable_E7() NOOP
#define disable_E7() NOOP
#define ENABLE_AXIS_E0() { ENABLE_STEPPER_E0(); ENABLE_STEPPER_E1(); }
#define DISABLE_AXIS_E0() { DISABLE_STEPPER_E0(); DISABLE_STEPPER_E1(); }
#endif
#endif // !MIXING_EXTRUDER
#ifndef ENABLE_AXIS_E0
#if E_STEPPERS > 0 && HAS_E0_ENABLE
#define ENABLE_AXIS_E0() ENABLE_STEPPER_E0()
#else
#define ENABLE_AXIS_E0() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E0
#if E_STEPPERS > 0 && HAS_E0_DISABLE
#define DISABLE_AXIS_E0() DISABLE_STEPPER_E0()
#else
#define DISABLE_AXIS_E0() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E1
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define ENABLE_AXIS_E1() ENABLE_STEPPER_E1()
#else
#define ENABLE_AXIS_E1() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E1
#if E_STEPPERS > 1 && HAS_E1_DISABLE
#define DISABLE_AXIS_E1() DISABLE_STEPPER_E1()
#else
#define DISABLE_AXIS_E1() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E2
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define ENABLE_AXIS_E2() ENABLE_STEPPER_E2()
#else
#define ENABLE_AXIS_E2() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E2
#if E_STEPPERS > 2 && HAS_E2_DISABLE
#define DISABLE_AXIS_E2() DISABLE_STEPPER_E2()
#else
#define DISABLE_AXIS_E2() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E3
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define ENABLE_AXIS_E3() ENABLE_STEPPER_E3()
#else
#define ENABLE_AXIS_E3() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E3
#if E_STEPPERS > 3 && HAS_E3_DISABLE
#define DISABLE_AXIS_E3() DISABLE_STEPPER_E3()
#else
#define DISABLE_AXIS_E3() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E4
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define ENABLE_AXIS_E4() ENABLE_STEPPER_E4()
#else
#define ENABLE_AXIS_E4() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E4
#if E_STEPPERS > 4 && HAS_E4_DISABLE
#define DISABLE_AXIS_E4() DISABLE_STEPPER_E4()
#else
#define DISABLE_AXIS_E4() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E5
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define ENABLE_AXIS_E5() ENABLE_STEPPER_E5()
#else
#define ENABLE_AXIS_E5() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E5
#if E_STEPPERS > 5 && HAS_E5_DISABLE
#define DISABLE_AXIS_E5() DISABLE_STEPPER_E5()
#else
#define DISABLE_AXIS_E5() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E6
#if E_STEPPERS > 6 && HAS_E6_ENABLE
#define ENABLE_AXIS_E6() ENABLE_STEPPER_E6()
#else
#define ENABLE_AXIS_E6() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E6
#if E_STEPPERS > 6 && HAS_E6_DISABLE
#define DISABLE_AXIS_E6() DISABLE_STEPPER_E6()
#else
#define DISABLE_AXIS_E6() NOOP
#endif
#endif
#ifndef ENABLE_AXIS_E7
#if E_STEPPERS > 7 && HAS_E7_ENABLE
#define ENABLE_AXIS_E7() ENABLE_STEPPER_E7()
#else
#define ENABLE_AXIS_E7() NOOP
#endif
#endif
#ifndef DISABLE_AXIS_E7
#if E_STEPPERS > 7 && HAS_E7_DISABLE
#define DISABLE_AXIS_E7() DISABLE_STEPPER_E7()
#else
#define DISABLE_AXIS_E7() NOOP
#endif
#endif