MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Misc. cleanup, serial strings

Browse Source
This commit is contained in:
Scott Lahteine 2020-10-19 20:38:24 -05:00
parent a90b90e98d
commit 53a4b8fa33
7 changed files with 12 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/TEENSY40_41/HAL.h
View File

@ -69,7 +69,7 @@
#elif WITHIN(SERIAL_PORT_2, 0, 8)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 8. Please update your configuration."
#error "SERIAL_PORT_2 must be from -2 to 8. Please update your configuration."
#endif
#endif

10
Marlin/src/gcode/gcode_d.cpp
View File

@ -107,7 +107,7 @@
SERIAL_EOL();
persistentStore.access_finish();
#else
SERIAL_ECHOLN("NO EEPROM");
SERIAL_ECHOLNPGM("NO EEPROM");
#endif
}
else {
@ -125,7 +125,7 @@
SERIAL_EOL();
persistentStore.access_finish();
#else
SERIAL_ECHOLN("NO EEPROM");
SERIAL_ECHOLNPGM("NO EEPROM");
#endif
}
SERIAL_EOL();
@ -173,8 +173,8 @@
} break;
case 100: { // D100 Disable heaters and attempt a hard hang (Watchdog Test)
SERIAL_ECHOLN("Disabling heaters and attempting to trigger Watchdog");
SERIAL_ECHOLN("(USE_WATCHDOG " TERN(USE_WATCHDOG, "ENABLED", "DISABLED") ")");
SERIAL_ECHOLNPGM("Disabling heaters and attempting to trigger Watchdog");
SERIAL_ECHOLNPGM("(USE_WATCHDOG " TERN(USE_WATCHDOG, "ENABLED", "DISABLED") ")");
thermalManager.disable_all_heaters();
delay(1000); // Allow time to print
DISABLE_ISRS();
@ -183,7 +183,7 @@
// watchdog does not work.
DELAY_US(10000000);
ENABLE_ISRS();
SERIAL_ECHOLN("FAILURE: Watchdog did not trigger board reset.");
SERIAL_ECHOLNPGM("FAILURE: Watchdog did not trigger board reset.");
}
}
}

6
Marlin/src/gcode/host/M118.cpp
View File

@ -57,9 +57,9 @@ void GcodeSuite::M118() {
if (WITHIN(port, 0, NUM_SERIAL))
serial_port_index = (
port == 0 ? SERIAL_BOTH
: port == 1 ? SERIAL_PORT
#ifdef SERIAL_PORT_2
: port == 2 ? SERIAL_PORT_2
: port == 1 ? 0
#if HAS_MULTI_SERIAL
: port == 2 ? 1
#endif
: SERIAL_PORT
);

4
Marlin/src/gcode/parser.cpp
View File

@ -28,10 +28,6 @@
#include "../MarlinCore.h"
#if HAS_MULTI_SERIAL
#include "queue.h"
#endif
// Must be declared for allocation and to satisfy the linker
// Zero values need no initialization.

2
Marlin/src/module/settings.cpp
View File

@ -2296,7 +2296,7 @@ void MarlinSettings::postprocess() {
#if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503)
// Report the EEPROM settings
if (!validating && (DISABLED(EEPROM_BOOT_SILENT) || IsRunning())) report();
if (!validating && TERN1(EEPROM_BOOT_SILENT, IsRunning())) report();
#endif
EEPROM_FINISH();

3
Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
View File

@ -49,9 +49,6 @@
//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB
//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL)
//#define EEPROM_CHITCHAT
//#define DEBUG_EEPROM_READWRITE
//
// Limit Switches
//

2
buildroot/tests/teensy41-tests
View File

@ -57,7 +57,7 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
#
# Test MAGNETIC_PARKING_EXTRUDER with LCD
# Test MAGNETIC_PARKING_EXTRUDER with no LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41