Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
Enhancement of PWM, with dithering
This commit is contained in:
Scott Lahteine
GitHub
commit
5a2abeca78
|
|
@ -1425,6 +1425,12 @@
|
|||
// at zero value, there are 128 effective control positions.
|
||||
#define SOFT_PWM_SCALE 0
|
||||
|
||||
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
|
||||
// be used to mitigate the associated resolution loss. If enabled,
|
||||
// some of the PWM cycles are stretched so on average the wanted
|
||||
// duty cycle is attained.
|
||||
//#define SOFT_PWM_DITHER
|
||||
|
||||
// Temperature status LEDs that display the hotend and bed temperature.
|
||||
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||
|
|
|
|||
|
|
@ -1512,6 +1512,8 @@ void Temperature::isr() {
|
|||
static uint8_t temp_count = 0;
|
||||
static TempState temp_state = StartupDelay;
|
||||
static uint8_t pwm_count = _BV(SOFT_PWM_SCALE);
|
||||
// avoid multiple loads of pwm_count
|
||||
uint8_t pwm_count_tmp = pwm_count;
|
||||
|
||||
// Static members for each heater
|
||||
#if ENABLED(SLOW_PWM_HEATERS)
|
||||
|
|
@ -1521,7 +1523,7 @@ void Temperature::isr() {
|
|||
static uint8_t state_heater_ ## n = 0; \
|
||||
static uint8_t state_timer_heater_ ## n = 0
|
||||
#else
|
||||
#define ISR_STATICS(n) static uint8_t soft_pwm_ ## n
|
||||
#define ISR_STATICS(n) static uint8_t soft_pwm_ ## n = 0
|
||||
#endif
|
||||
|
||||
// Statics per heater
|
||||
|
|
@ -1544,72 +1546,82 @@ void Temperature::isr() {
|
|||
#endif
|
||||
|
||||
#if DISABLED(SLOW_PWM_HEATERS)
|
||||
constexpr uint8_t pwm_mask =
|
||||
#if ENABLED(SOFT_PWM_DITHER)
|
||||
_BV(SOFT_PWM_SCALE) - 1
|
||||
#else
|
||||
0
|
||||
#endif
|
||||
;
|
||||
|
||||
/**
|
||||
* Standard PWM modulation
|
||||
*/
|
||||
if (pwm_count == 0) {
|
||||
soft_pwm_0 = soft_pwm[0];
|
||||
WRITE_HEATER_0(soft_pwm_0 > 0 ? HIGH : LOW);
|
||||
if (pwm_count_tmp >= 127) {
|
||||
pwm_count_tmp -= 127;
|
||||
soft_pwm_0 = (soft_pwm_0 & pwm_mask) + soft_pwm[0];
|
||||
WRITE_HEATER_0(soft_pwm_0 > pwm_mask ? HIGH : LOW);
|
||||
#if HOTENDS > 1
|
||||
soft_pwm_1 = soft_pwm[1];
|
||||
WRITE_HEATER_1(soft_pwm_1 > 0 ? HIGH : LOW);
|
||||
soft_pwm_1 = (soft_pwm_1 & pwm_mask) + soft_pwm[1];
|
||||
WRITE_HEATER_1(soft_pwm_1 > pwm_mask ? HIGH : LOW);
|
||||
#if HOTENDS > 2
|
||||
soft_pwm_2 = soft_pwm[2];
|
||||
WRITE_HEATER_2(soft_pwm_2 > 0 ? HIGH : LOW);
|
||||
soft_pwm_2 = (soft_pwm_2 & pwm_mask) + soft_pwm[2];
|
||||
WRITE_HEATER_2(soft_pwm_2 > pwm_mask ? HIGH : LOW);
|
||||
#if HOTENDS > 3
|
||||
soft_pwm_3 = soft_pwm[3];
|
||||
WRITE_HEATER_3(soft_pwm_3 > 0 ? HIGH : LOW);
|
||||
soft_pwm_3 = (soft_pwm_3 & pwm_mask) + soft_pwm[3];
|
||||
WRITE_HEATER_3(soft_pwm_3 > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
soft_pwm_BED = soft_pwm_bed;
|
||||
WRITE_HEATER_BED(soft_pwm_BED > 0 ? HIGH : LOW);
|
||||
soft_pwm_BED = (soft_pwm_BED & pwm_mask) + soft_pwm_bed;
|
||||
WRITE_HEATER_BED(soft_pwm_BED > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
#if HAS_FAN0
|
||||
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1;
|
||||
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW);
|
||||
soft_pwm_fan[0] = (soft_pwm_fan[0] & pwm_mask) + fanSpeedSoftPwm[0] >> 1;
|
||||
WRITE_FAN(soft_pwm_fan[0] > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
#if HAS_FAN1
|
||||
soft_pwm_fan[1] = fanSpeedSoftPwm[1] >> 1;
|
||||
WRITE_FAN1(soft_pwm_fan[1] > 0 ? HIGH : LOW);
|
||||
soft_pwm_fan[1] = (soft_pwm_fan[1] & pwm_mask) + fanSpeedSoftPwm[1] >> 1;
|
||||
WRITE_FAN1(soft_pwm_fan[1] > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
#if HAS_FAN2
|
||||
soft_pwm_fan[2] = fanSpeedSoftPwm[2] >> 1;
|
||||
WRITE_FAN2(soft_pwm_fan[2] > 0 ? HIGH : LOW);
|
||||
soft_pwm_fan[2] = (soft_pwm_fan[2] & pwm_mask) + fanSpeedSoftPwm[2] >> 1;
|
||||
WRITE_FAN2(soft_pwm_fan[2] > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
if (soft_pwm_0 < pwm_count) WRITE_HEATER_0(0);
|
||||
#if HOTENDS > 1
|
||||
if (soft_pwm_1 < pwm_count) WRITE_HEATER_1(0);
|
||||
else {
|
||||
if (soft_pwm_0 <= pwm_count_tmp) WRITE_HEATER_0(0);
|
||||
#if HOTENDS > 1
|
||||
if (soft_pwm_1 <= pwm_count_tmp) WRITE_HEATER_1(0);
|
||||
#endif
|
||||
#if HOTENDS > 2
|
||||
if (soft_pwm_2 < pwm_count) WRITE_HEATER_2(0);
|
||||
#if HOTENDS > 3
|
||||
if (soft_pwm_3 < pwm_count) WRITE_HEATER_3(0);
|
||||
if (soft_pwm_2 <= pwm_count_tmp) WRITE_HEATER_2(0);
|
||||
#endif
|
||||
#if HOTENDS > 3
|
||||
if (soft_pwm_3 <= pwm_count_tmp) WRITE_HEATER_3(0);
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
if (soft_pwm_BED <= pwm_count_tmp) WRITE_HEATER_BED(0);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
#if HAS_FAN0
|
||||
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
|
||||
#endif
|
||||
#if HAS_FAN1
|
||||
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
|
||||
#endif
|
||||
#if HAS_FAN2
|
||||
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
if (soft_pwm_BED < pwm_count) WRITE_HEATER_BED(0);
|
||||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
#if HAS_FAN0
|
||||
if (soft_pwm_fan[0] < pwm_count) WRITE_FAN(0);
|
||||
#endif
|
||||
#if HAS_FAN1
|
||||
if (soft_pwm_fan[1] < pwm_count) WRITE_FAN1(0);
|
||||
#endif
|
||||
#if HAS_FAN2
|
||||
if (soft_pwm_fan[2] < pwm_count) WRITE_FAN2(0);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
// SOFT_PWM_SCALE to frequency:
|
||||
//
|
||||
|
|
@ -1619,8 +1631,7 @@ void Temperature::isr() {
|
|||
// 3: / 16 = 61.0352 Hz
|
||||
// 4: / 8 = 122.0703 Hz
|
||||
// 5: / 4 = 244.1406 Hz
|
||||
pwm_count += _BV(SOFT_PWM_SCALE);
|
||||
pwm_count &= 0x7F;
|
||||
pwm_count = pwm_count_tmp + _BV(SOFT_PWM_SCALE);
|
||||
|
||||
#else // SLOW_PWM_HEATERS
|
||||
|
||||
|
|
@ -1694,7 +1705,8 @@ void Temperature::isr() {
|
|||
#endif
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
if (pwm_count == 0) {
|
||||
if (pwm_count_tmp >= 127) {
|
||||
pwm_count_tmp = 0;
|
||||
#if HAS_FAN0
|
||||
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1;
|
||||
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW);
|
||||
|
|
@ -1709,15 +1721,15 @@ void Temperature::isr() {
|
|||
#endif
|
||||
}
|
||||
#if HAS_FAN0
|
||||
if (soft_pwm_fan[0] < pwm_count) WRITE_FAN(0);
|
||||
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
|
||||
#endif
|
||||
#if HAS_FAN1
|
||||
if (soft_pwm_fan[1] < pwm_count) WRITE_FAN1(0);
|
||||
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
|
||||
#endif
|
||||
#if HAS_FAN2
|
||||
if (soft_pwm_fan[2] < pwm_count) WRITE_FAN2(0);
|
||||
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
|
||||
#endif
|
||||
#endif //FAN_SOFT_PWM
|
||||
#endif // FAN_SOFT_PWM
|
||||
|
||||
// SOFT_PWM_SCALE to frequency:
|
||||
//
|
||||
|
|
@ -1727,13 +1739,13 @@ void Temperature::isr() {
|
|||
// 3: / 16 = 61.0352 Hz
|
||||
// 4: / 8 = 122.0703 Hz
|
||||
// 5: / 4 = 244.1406 Hz
|
||||
pwm_count += _BV(SOFT_PWM_SCALE);
|
||||
pwm_count &= 0x7F;
|
||||
pwm_count = pwm_count_tmp + _BV(SOFT_PWM_SCALE);
|
||||
|
||||
// increment slow_pwm_count only every 64 pwm_count (e.g., every 8s)
|
||||
if ((pwm_count % 64) == 0) {
|
||||
// increment slow_pwm_count only every 64th pwm_count,
|
||||
// i.e. yielding a PWM frequency of 16/128 Hz (8s).
|
||||
if (((pwm_count >> SOFT_PWM_SCALE) & 0x3F) == 0) {
|
||||
slow_pwm_count++;
|
||||
slow_pwm_count &= 0x7f;
|
||||
slow_pwm_count &= 0x7F;
|
||||
|
||||
// EXTRUDER 0
|
||||
if (state_timer_heater_0 > 0) state_timer_heater_0--;
|
||||
|
|
@ -1749,7 +1761,7 @@ void Temperature::isr() {
|
|||
#if HAS_HEATER_BED
|
||||
if (state_timer_heater_BED > 0) state_timer_heater_BED--;
|
||||
#endif
|
||||
} // (pwm_count % 64) == 0
|
||||
} // ((pwm_count >> SOFT_PWM_SCALE) & 0x3F) == 0
|
||||
|
||||
#endif // SLOW_PWM_HEATERS
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user