From 5e2582a31bef1efbb2ad2ca2a8aeb2fe57d55ee0 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 2 Aug 2019 02:17:40 -0500 Subject: [PATCH] Comment spacing --- .../src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp | 2 +- .../stm32f4xx_hal_conf.h | 20 +++++++++---------- .../BIGTREE_GENERIC_STM32F407_5X/variant.cpp | 2 +- .../MARLIN_F407VE/stm32f4xx_hal_conf.h | 20 +++++++++---------- .../variants/MARLIN_F407VE/variant.cpp | 2 +- 5 files changed, 23 insertions(+), 23 deletions(-) diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp index d9df853e99..f8db99d3f6 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp @@ -68,7 +68,7 @@ static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Da static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data); static uint16_t EE_VerifyPageFullyErased(uint32_t Address); -/** + /** * @brief Restore the pages to a known good state in case of page's status * corruption after a power loss. * @param None. diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h index 2e111dff89..36d69b64c9 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h @@ -28,7 +28,7 @@ extern "C" { /* Exported constants --------------------------------------------------------*/ /* ########################## Module Selection ############################## */ -/** + /** * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED @@ -82,7 +82,7 @@ extern "C" { /* #define HAL_MMC_MODULE_ENABLED */ /* ########################## HSE/HSI Values adaptation ##################### */ -/** + /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). @@ -95,7 +95,7 @@ extern "C" { #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ -/** + /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). @@ -104,7 +104,7 @@ extern "C" { #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ -/** + /** * @brief Internal Low Speed oscillator (LSI) value. */ #if !defined (LSI_VALUE) @@ -112,7 +112,7 @@ extern "C" { #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ -/** + /** * @brief External Low Speed oscillator (LSE) value. */ #if !defined (LSE_VALUE) @@ -123,7 +123,7 @@ in voltage and temperature.*/ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ -/** + /** * @brief External clock source for I2S peripheral * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. @@ -136,7 +136,7 @@ in voltage and temperature.*/ === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ -/** + /** * @brief This is the HAL system configuration section */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ @@ -186,7 +186,7 @@ in voltage and temperature.*/ #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ /* ########################## Assert Selection ############################## */ -/** + /** * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ @@ -258,7 +258,7 @@ in voltage and temperature.*/ #define USE_SPI_CRC 0U /* Includes ------------------------------------------------------------------*/ -/** + /** * @brief Include module's header file */ @@ -456,7 +456,7 @@ in voltage and temperature.*/ /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT -/** + /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp index 8e3c92fb04..d21f5d7dd7 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp @@ -226,7 +226,7 @@ const PinName digitalPin[] = { extern "C" { #endif -/** + /** * @brief System Clock Configuration * @param None * @retval None diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h index 2e111dff89..36d69b64c9 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h @@ -28,7 +28,7 @@ extern "C" { /* Exported constants --------------------------------------------------------*/ /* ########################## Module Selection ############################## */ -/** + /** * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED @@ -82,7 +82,7 @@ extern "C" { /* #define HAL_MMC_MODULE_ENABLED */ /* ########################## HSE/HSI Values adaptation ##################### */ -/** + /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). @@ -95,7 +95,7 @@ extern "C" { #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ -/** + /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). @@ -104,7 +104,7 @@ extern "C" { #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ -/** + /** * @brief Internal Low Speed oscillator (LSI) value. */ #if !defined (LSI_VALUE) @@ -112,7 +112,7 @@ extern "C" { #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ -/** + /** * @brief External Low Speed oscillator (LSE) value. */ #if !defined (LSE_VALUE) @@ -123,7 +123,7 @@ in voltage and temperature.*/ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ -/** + /** * @brief External clock source for I2S peripheral * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. @@ -136,7 +136,7 @@ in voltage and temperature.*/ === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ -/** + /** * @brief This is the HAL system configuration section */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ @@ -186,7 +186,7 @@ in voltage and temperature.*/ #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ /* ########################## Assert Selection ############################## */ -/** + /** * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ @@ -258,7 +258,7 @@ in voltage and temperature.*/ #define USE_SPI_CRC 0U /* Includes ------------------------------------------------------------------*/ -/** + /** * @brief Include module's header file */ @@ -456,7 +456,7 @@ in voltage and temperature.*/ /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT -/** + /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp index 4ec69543ba..82a69bcc5a 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp @@ -104,7 +104,7 @@ const PinName digitalPin[] = { extern "C" { #endif -/** + /** * @brief System Clock Configuration * @param None * @retval None