MPCNC
/
Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

✨ Anycubic i3 Mega LCD file menu fix (#24752)

This commit is contained in:
Stefan Kalscheuer 2022-09-16 21:21:13 +02:00 committed by Scott Lahteine
parent be149336f0
commit 5ee74668cf
2 changed files with 51 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration.h
View File

@ -2989,6 +2989,7 @@
//#define ANYCUBIC_LCD_CHIRON
#if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
//#define ANYCUBIC_LCD_DEBUG
//#define ANYCUBIC_LCD_GCODE_EXT // Add ".gcode" to menu entries for DGUS clone compatibility
#endif
//

94
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@ -46,6 +46,12 @@
#define SENDLINE_DBG_PGM_VAL(x,y,z) sendLine_P(PSTR(x))
#endif
// Append ".gcode" to filename, if requested. Used for some DGUS-clone displays with built-in filter.
// Filenames are limited to 26 characters, so the actual name for the FILENAME can be 20 characters at most.
// If a longer string is desired without "extension, use the ALTNAME macro to provide a (longer) alternative.
#define SPECIAL_MENU_FILENAME(A) A TERN_(ANYCUBIC_LCD_GCODE_EXT, ".gcode")
#define SPECIAL_MENU_ALTNAME(A, B) TERN(ANYCUBIC_LCD_GCODE_EXT, A ".gcode", B)
AnycubicTFTClass AnycubicTFT;
char AnycubicTFTClass::TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE];
@ -383,8 +389,8 @@ void AnycubicTFTClass::RenderCurrentFileList() {
if (!isMediaInserted() && !SpecialMenu) {
SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to render Current File List... J02");
SENDLINE_PGM("<Special_Menu>");
SENDLINE_PGM("<Special_Menu>");
SENDLINE_PGM("<SPECI~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Special Menu>"));
}
else {
if (CodeSeen('S'))
@ -403,58 +409,58 @@ void AnycubicTFTClass::RenderSpecialMenu(uint16_t selectedNumber) {
switch (selectedNumber) {
#if ENABLED(PROBE_MANUALLY)
case 0: // First Page
SENDLINE_PGM("<01ZUp0.1>");
SENDLINE_PGM("<Z Up 0.1>");
SENDLINE_PGM("<02ZUp0.02>");
SENDLINE_PGM("<Z Up 0.02>");
SENDLINE_PGM("<03ZDn0.02>");
SENDLINE_PGM("<Z Down 0.02>");
SENDLINE_PGM("<04ZDn0.1>");
SENDLINE_PGM("<Z Down 0.1>");
SENDLINE_PGM("<01ZUP~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Z Up 0.1>"));
SENDLINE_PGM("<02ZUP~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Z Up 0.02>"));
SENDLINE_PGM("<03ZDO~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Z Down 0.02>"));
SENDLINE_PGM("<04ZDO~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Z Down 0.1>"));
break;
case 4: // Second Page
SENDLINE_PGM("<05PrehtBed>");
SENDLINE_PGM("<Preheat bed>");
SENDLINE_PGM("<06SMeshLvl>");
SENDLINE_PGM("<Start Mesh Leveling>");
SENDLINE_PGM("<07MeshNPnt>");
SENDLINE_PGM("<Next Mesh Point>");
SENDLINE_PGM("<08HtEndPID>");
SENDLINE_PGM("<Auto Tune Hotend PID>");
SENDLINE_PGM("<05PRE~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Preheat Bed>"));
SENDLINE_PGM("<06MES~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_ALTNAME("<Mesh Leveling>", "<Start Mesh Leveling>"));
SENDLINE_PGM("<07NEX~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Next Mesh Point>"));
SENDLINE_PGM("<08PID~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<PID Tune Hotend>"));
break;
case 8: // Third Page
SENDLINE_PGM("<09HtBedPID>");
SENDLINE_PGM("<Auto Tune Hotbed PID>");
SENDLINE_PGM("<10FWDeflts>");
SENDLINE_PGM("<Load FW Defaults>");
SENDLINE_PGM("<11SvEEPROM>");
SENDLINE_PGM("<Save EEPROM>");
SENDLINE_PGM("<Exit>");
SENDLINE_PGM("<Exit>");
SENDLINE_PGM("<09PID~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<PID Tune Hotbed>"));
SENDLINE_PGM("<10FWD~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Load FW Defaults>"));
SENDLINE_PGM("<11SAV~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Save EEPROM>"));
SENDLINE_PGM("<EXIT_~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Exit>"));
break;
#else
case 0: // First Page
SENDLINE_PGM("<01PrehtBed>");
SENDLINE_PGM("<Preheat bed>");
SENDLINE_PGM("<02ABL>");
SENDLINE_PGM("<Auto Bed Leveling>");
SENDLINE_PGM("<03HtEndPID>");
SENDLINE_PGM("<Auto Tune Hotend PID>");
SENDLINE_PGM("<04HtBedPID>");
SENDLINE_PGM("<Auto Tune Hotbed PID>");
SENDLINE_PGM("<01PRE~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Preheat Bed>"));
SENDLINE_PGM("<02ABL~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Auto Bed Leveling>"));
SENDLINE_PGM("<03PID~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_ALTNAME("<PID Tune Hotend>", "<Auto Tune Hotend PID>"));
SENDLINE_PGM("<04PID~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_ALTNAME("<PID Tune Hotbed>", "<Auto Tune Hotbed PID>"));
break;
case 4: // Second Page
SENDLINE_PGM("<05FWDeflts>");
SENDLINE_PGM("<Load FW Defaults>");
SENDLINE_PGM("<06SvEEPROM>");
SENDLINE_PGM("<Save EEPROM>");
SENDLINE_PGM("<07SendM108>");
SENDLINE_PGM("<Send User Confirmation>");
SENDLINE_PGM("<Exit>");
SENDLINE_PGM("<Exit>");
SENDLINE_PGM("<05FWD~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Load FW Defaults>"));
SENDLINE_PGM("<06SAV~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Save EEPROM>"));
SENDLINE_PGM("<06SEN~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_ALTNAME("<User Confirmation>", "<Send User Confirmation>"));
SENDLINE_PGM("<EXIT_~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Exit>"));
break;
#endif // PROBE_MANUALLY
@ -478,8 +484,8 @@ void AnycubicTFTClass::RenderCurrentFolder(uint16_t selectedNumber) {
for (cnt = selectedNumber; cnt <= max_files; cnt++) {
if (cnt == 0) { // Special Entry
if (currentFileList.isAtRootDir()) {
SENDLINE_PGM("<specialmnu>");
SENDLINE_PGM("<Special Menu>");
SENDLINE_PGM("<SPECI~1.GCO");
SENDLINE_PGM(SPECIAL_MENU_FILENAME("<Special Menu>"));
}
else {
SENDLINE_PGM("/..");