🔨 Enhance Lerdge pins, TFTs, and variants (#22658)

This commit is contained in:
Tanguy Pruvot 2021-09-02 01:55:36 +02:00 committed by Scott Lahteine
parent 105fd73c28
commit 61364906b3
28 changed files with 233 additions and 222 deletions

View File

@ -2710,6 +2710,7 @@
//#define TFT_RES_320x240
//#define TFT_RES_480x272
//#define TFT_RES_480x320
//#define TFT_RES_1024x600
#endif
/**

View File

@ -1219,30 +1219,19 @@
*/
#if ENABLED(MKS_TS35_V2_0) // ST7796
#define TFT_DEFAULT_DRIVER ST7796
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY
#define TFT_RES_480x320
#define TFT_INTERFACE_SPI
#elif ENABLED(ANET_ET5_TFT35) // ST7796
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#elif EITHER(LERDGE_TFT35, ANET_ET5_TFT35) // ST7796
#define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
#elif ENABLED(ANET_ET4_TFT28) // ST7789
#elif ANY(ANET_ET4_TFT28, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32) // ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif ENABLED(MKS_ROBIN_TFT24) // ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif ENABLED(MKS_ROBIN_TFT28) // ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif ENABLED(MKS_ROBIN_TFT32) // ST7789
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif ENABLED(MKS_ROBIN_TFT35) // ILI9488
#elif ANY(MKS_ROBIN_TFT35, TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488
#define TFT_DRIVER ILI9488
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
@ -1251,21 +1240,12 @@
#define TFT_DEFAULT_ORIENTATION 0
#define TFT_RES_480x272
#define TFT_INTERFACE_FSMC
#elif ENABLED(MKS_ROBIN_TFT_V1_1R) // ILI9328 or R61505
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488
#define TFT_DRIVER ILI9488
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
#elif ENABLED(LONGER_LK_TFT28)
#elif ANY(MKS_ROBIN_TFT_V1_1R, LONGER_LK_TFT28) // ILI9328 or R61505
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#define TFT_RES_320x240
#define TFT_INTERFACE_FSMC
#elif ENABLED(BIQU_BX_TFT70) // RGB
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY
#define TFT_RES_1024x600
#define TFT_INTERFACE_LTDC
#if ENABLED(TOUCH_SCREEN)

View File

@ -144,39 +144,11 @@ static const uint16_t st7796s_init[] = {
ESC_REG(ST7796S_PGC), 0x00F0, 0x0004, 0x0008, 0x0009, 0x0008, 0x0015, 0x002F, 0x0042, 0x0046, 0x0028, 0x0015, 0x0016, 0x0029, 0x002D,
ESC_REG(ST7796S_NGC), 0x00F0, 0x0004, 0x0009, 0x0009, 0x0008, 0x0015, 0x002E, 0x0046, 0x0046, 0x0028, 0x0015, 0x0015, 0x0029, 0x002D,
ESC_REG(ST7796S_NORON),
ESC_REG(ST7796S_WRCTRLD), 0x0024,
ESC_REG(ST7796S_CSCON), 0x003C, // disable command 2 part I
ESC_REG(ST7796S_CSCON), 0x0069, // disable command 2 part II
ESC_REG(ST7796S_DISPON),
ESC_END
};
static const uint16_t lerdge_st7796s_init[] = {
DATASIZE_8BIT,
ESC_REG(ST7796S_SWRESET), ESC_DELAY(100),
ESC_REG(ST7796S_SLPOUT), ESC_DELAY(20),
ESC_REG(ST7796S_CSCON), 0x00C3, // enable command 2 part I
ESC_REG(ST7796S_CSCON), 0x0096, // enable command 2 part II
ESC_REG(ST7796S_MADCTL), ST7796S_MADCTL_DATA,
ESC_REG(ST7796S_COLMOD), 0x0055,
ESC_REG(ST7796S_DIC), 0x0001, // 1-dot inversion
ESC_REG(ST7796S_EM), 0x00C6,
ESC_REG(ST7796S_PWR2), 0x0015,
ESC_REG(ST7796S_PWR3), 0x00AF,
ESC_REG(ST7796S_VCMPCTL), 0x0022,
ESC_REG(ST7796S_VCMOST), 0x0000,
ESC_REG(ST7796S_DOCA), 0x0040, 0x008A, 0x0000, 0x0000, 0x0029, 0x0019, 0x00A5, 0x0033,
/* Gamma Correction. */
ESC_REG(ST7796S_PGC), 0x00F0, 0x0004, 0x0008, 0x0009, 0x0008, 0x0015, 0x002F, 0x0042, 0x0046, 0x0028, 0x0015, 0x0016, 0x0029, 0x002D,
ESC_REG(ST7796S_NGC), 0x00F0, 0x0004, 0x0009, 0x0009, 0x0008, 0x0015, 0x002E, 0x0046, 0x0046, 0x0028, 0x0015, 0x0015, 0x0029, 0x002D,
ESC_REG(ST7796S_INVON), // Display inversion ON
#if ENABLED(ST7796S_INVERTED)
ESC_REG(ST7796S_INVON), // Display inversion ON
#else
ESC_REG(ST7796S_NORON),
#endif
ESC_REG(ST7796S_WRCTRLD), 0x0024,
ESC_REG(ST7796S_CSCON), 0x003C, // disable command 2 part I
ESC_REG(ST7796S_CSCON), 0x0069, // disable command 2 part II

View File

@ -31,5 +31,4 @@
#define ILI9341 0x9341
#define ILI9488 0x9488
#define ILI9488_ID1 0x8066 // Some ILI9488 have 0x8066 in the 0x04
#define LERDGE_ST7796 0xFFFE
#define AUTO 0xFFFF

View File

@ -97,10 +97,6 @@ if (lcd_id != 0xFFFFFFFF) return;
write_esc_sequence(ili9341_init);
#elif TFT_DRIVER == ILI9488
write_esc_sequence(ili9488_init);
#elif TFT_DRIVER == LERDGE_ST7796
lcd_id = ST7796;
write_esc_sequence(lerdge_st7796s_init);
#elif TFT_DRIVER == AUTO // autodetect
lcd_id = io.GetID() & 0xFFFF;

View File

@ -427,10 +427,10 @@
#define TFT_DRIVER ST7796
#endif
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 63934
#define XPT2046_X_CALIBRATION 63934
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 63598
#define XPT2046_Y_CALIBRATION 63598
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET -1

View File

@ -72,42 +72,43 @@
#define X_DIR_PIN PB10
#define X_ENABLE_PIN PG0
//#ifndef X_CS_PIN
// #define X_CS_PIN PE0
// #define X_CS_PIN PB2
//#endif
#define Y_STEP_PIN PF14
#define Y_DIR_PIN PF15
#define Y_ENABLE_PIN PF13
//#ifndef Y_CS_PIN
// #define Y_CS_PIN PE1
// #define Y_CS_PIN PE2
//#endif
#define Z_STEP_PIN PF11
#define Z_DIR_PIN PF12
#define Z_ENABLE_PIN PC5
//#ifndef Z_CS_PIN
// #define Z_CS_PIN PE2
// #define Z_CS_PIN PE3
//#endif
#define E0_STEP_PIN PC14
#define E0_DIR_PIN PC13
#define E0_ENABLE_PIN PC15
//#ifndef E0_CS_PIN
// #define E0_CS_PIN PE3
// #define E0_CS_PIN PE4
//#endif
#define E1_STEP_PIN PF1
#define E1_DIR_PIN PF0
#define E1_ENABLE_PIN PF2
//#ifndef E1_CS_PIN
// #define E1_CS_PIN PE4
// #define E1_CS_PIN PE1
//#endif
//#define E2_STEP_PIN PF4 // best guess
//#define E2_DIR_PIN PF3 // best guess
//#define E2_ENABLE_PIN PF5 // best guess
//#ifndef E2_CS_PIN
// #define E2_CS_PIN PB2 // best guess
//#define Z2_STEP_PIN PF4
//#define Z2_DIR_PIN PF3
//#define Z2_ENABLE_PIN PF5
//#define Z2_STOP_PIN PG2
//#ifndef Z2_CS_PIN
// #define Z2_CS_PIN PE0
//#endif
#if HAS_TMC_UART
@ -144,12 +145,17 @@
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
#endif
// Ex-motor can be any... X2/Y2/Z2 or E2
#ifndef EX_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN PE0
#define EX_SERIAL_TX_PIN PE0
#endif
#ifndef EX_SERIAL_RX_PIN
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
#define EX_SERIAL_RX_PIN EX_SERIAL_TX_PIN
#endif
//#define Z2_SERIAL_RX_PIN EX_SERIAL_RX_PIN
//#define Z2_SERIAL_TX_PIN EX_SERIAL_TX_PIN
//#define E2_SERIAL_RX_PIN EX_SERIAL_RX_PIN
//#define E2_SERIAL_TX_PIN EX_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
@ -193,8 +199,8 @@
//
// LED / Lighting
//
//#define CASE_LIGHT_PIN_CI -1
//#define CASE_LIGHT_PIN_DO -1
#define LED_PIN PA15 // Status LED
//#define CASE_LIGHT_PIN PB6 // LED Ribbon Connector (PWM TIM4_CH1)
//#define NEOPIXEL_PIN -1
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB8 // swap R and G pin for compatibility with real wires
@ -211,44 +217,54 @@
//
#define SDIO_SUPPORT
#define SDIO_CLOCK 4800000
#define SD_DETECT_PIN PA8
#if DISABLED(SDIO_SUPPORT)
#define SOFTWARE_SPI
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
#define SDSS PC11
#endif
//
// Misc. Functions
//
#define SDSS PC11
#define LED_PIN PA15 // Alive
#define PS_ON_PIN PA4
#define KILL_PIN -1
#define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
#define SD_DETECT_PIN PA8
#define BEEPER_PIN PC7
//
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
//#define TFT_DRIVER LERDGE_ST7796
#ifndef TFT_DRIVER
#define TFT_DRIVER ST7796
#endif
#define ST7796S_INVERTED
#define TFT_RESET_PIN PD6
#define TFT_BACKLIGHT_PIN PD3
#define TFT_CS_PIN PD7
#define TFT_RS_PIN PD11
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#define TOUCH_CS_PIN PG15
#define TOUCH_SCK_PIN PB3
#define TOUCH_MOSI_PIN PB5
#define TOUCH_MISO_PIN PB4
#define TOUCH_INT_PIN PG12
#endif
#if IS_NEWPANEL
#define BTN_EN1 PG10
#define BTN_EN2 PG11
#define BEEPER_PIN PC7
#define BTN_EN1 PG11
#define BTN_EN2 PG10
#define BTN_ENC PG9
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM 2
#endif
#endif

View File

@ -31,8 +31,6 @@
#define STEP_TIMER 4
#define TEMP_TIMER 2
//#define I2C_EEPROM
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
@ -150,7 +148,6 @@
//
// Misc. Functions
//
#define SDSS PC11 // SD is working using SDIO, not sure if this definition is needed?
#define LED_PIN PC6 // Mainboard soldered green LED
#define PS_ON_PIN PB2 // Board has a power module connector
#define KILL_PIN -1 // There is no reset button on the LCD
@ -161,23 +158,25 @@
//
#define SDIO_SUPPORT
#define SDIO_CLOCK 4800000
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
#define SD_DETECT_PIN PG15
#if DISABLED(SDIO_SUPPORT)
#define SOFTWARE_SPI
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
#define SDSS PC11
#endif
//
// Persistent Storage
// If no option is selected below the SD Card will be used
// (this section modelled after pins_LONGER3D_LK.h)
// Warning: Not tested yet! Pins traced with multimeter, mistakes are possible
//#define SPI_EEPROM
// Prefer the I2C option (F-RAM) to store Marlin settings, SPI option is not working yet
#if ENABLED(SPI_EEPROM)
// Lerdge has an SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf
//#define SPI_EEPROM
//#define I2C_EEPROM
#if ENABLED(SPI_EEPROM) // SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf
#define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS_PIN PB12 // datasheet: /CS pin, found with multimeter, not tested
#define EEPROM_SCK_PIN PB13 // datasheet: CLK pin, found with multimeter, not tested
@ -185,29 +184,45 @@
#define EEPROM_MOSI_PIN PB15 // datasheet: DI pin, found with multimeter, not tested
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now...
#elif ENABLED(I2C_EEPROM) // FM24CL64BG (CYP1813) 64Kbit F-RAM
#define SOFT_I2C_EEPROM // Force the use of Software I2C
#define I2C_SDA_PIN PG13
#define I2C_SCL_PIN PG14 // To be confirmed on the Lerdge S, but probably same as the K
#define MARLIN_EEPROM_SIZE 0x10000
#else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// LCD / Controller
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
#ifndef TFT_DRIVER
#define TFT_DRIVER ST7796
#endif
#define ST7796S_INVERTED
// The LCD is initialized in FSMC mode
#define BEEPER_PIN PD13
#define TFT_RESET_PIN PD6
#define TFT_BACKLIGHT_PIN PD3
#define BTN_EN1 PC14
#define BTN_EN2 PC15
#define BTN_ENC PC13
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define TFT_RESET_PIN PD6
#define TFT_BACKLIGHT_PIN PD3
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#define TFT_CS_PIN PD7 // TFT works
#define TFT_RS_PIN PD11 // TFT works
#define TOUCH_CS_PIN PB6
#define TOUCH_SCK_PIN PB3
#define TOUCH_MOSI_PIN PB5
#define TOUCH_MISO_PIN PB4
#endif
// There is touch, but calibration is off
#define TOUCH_CS_PIN PB6
#define TOUCH_SCK_PIN PB3
#define TOUCH_MOSI_PIN PB5
#define TOUCH_MISO_PIN PB4
#if IS_NEWPANEL
#define BEEPER_PIN PD13
#define BTN_EN1 PC15
#define BTN_EN2 PC14
#define BTN_ENC PC13
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM 2
#endif
#endif

View File

@ -113,10 +113,24 @@
//#define CASE_LIGHT_PIN_DO -1
//#define NEOPIXEL_PIN -1
//
// SD support (On board)
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN PA8
#define SDIO_CLOCK 4800000
#if DISABLED(SDIO_SUPPORT)
#define SOFTWARE_SPI
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
#define SDSS PC11
#endif
//
// Misc. Functions
//
#define SDSS PC11
#define LED_PIN PC7 // Alive
#define PS_ON_PIN -1
#define KILL_PIN -1
@ -124,36 +138,36 @@
// Lerdge supports auto-power off and power loss sense through a single pin.
#define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#define SD_SS_PIN PC11
//
// SD support
// TFT with FSMC interface
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN PA8
#define SDIO_CLOCK 4800000
#if HAS_FSMC_TFT
#ifndef TFT_DRIVER
#define TFT_DRIVER ST7796
#endif
#define ST7796S_INVERTED
//
// LCD / Controller
//
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
// The LCD is initialized in FSMC mode
#define BEEPER_PIN PD12
#define TFT_RESET_PIN PD6
#define TFT_BACKLIGHT_PIN PD3
#define BTN_EN1 PE3
#define BTN_EN2 PE4
#define BTN_ENC PE2
#define TFT_CS_PIN FSMC_CS_PIN
#define TFT_RS_PIN FSMC_RS_PIN
#define TFT_RESET_PIN PD6
#define TFT_BACKLIGHT_PIN PD3
#define TOUCH_CS_PIN PB6
#define TOUCH_SCK_PIN PB3
#define TOUCH_MOSI_PIN PB5
#define TOUCH_MISO_PIN PB4
#endif
#define TFT_CS_PIN PD7
#define TFT_RS_PIN PD11
#define TOUCH_CS_PIN PB6
#define TOUCH_SCK_PIN PB3
#define TOUCH_MOSI_PIN PB5
#define TOUCH_MISO_PIN PB4
#if IS_NEWPANEL
#define BEEPER_PIN PD12
#define BTN_EN1 PE4
#define BTN_EN2 PE3
#define BTN_ENC PE2
#ifndef ENCODER_STEPS_PER_MENU_ITEM
#define ENCODER_STEPS_PER_MENU_ITEM 2
#endif
#endif

View File

@ -41,7 +41,8 @@ def encrypt(source, target, env):
renamed.close()
if 'encrypt' in board.get("build").keys():
marlin.add_post_action(encrypt);
if board.get("build.encrypt") != "":
marlin.add_post_action(encrypt)
else:
print("LERDGE builds require output file via board_build.encrypt = 'filename' parameter")
exit(1);
exit(1)

View File

@ -45,7 +45,8 @@ if 'encrypt' in board_keys:
def encrypt(source, target, env):
marlin.encrypt_mks(source, target, env, board.get("build.encrypt"))
marlin.add_post_action(encrypt);
if board.get("build.encrypt") != "":
marlin.add_post_action(encrypt)
#
# For build.rename simply rename the firmware file.

View File

@ -4,6 +4,7 @@
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -32,7 +33,6 @@
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED

View File

@ -4,6 +4,7 @@
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -32,7 +33,6 @@
#undef HAL_SRAM_MODULE_ENABLED
#undef HAL_SDRAM_MODULE_ENABLED
#undef HAL_HASH_MODULE_ENABLED
#undef HAL_EXTI_MODULE_ENABLED
#undef HAL_SMBUS_MODULE_ENABLED
#undef HAL_I2S_MODULE_ENABLED
#undef HAL_IWDG_MODULE_ENABLED

View File

@ -4,6 +4,7 @@
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -32,7 +33,6 @@
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED

View File

@ -392,9 +392,7 @@ const PinMap PinMap_USB_OTG_FS[] = {
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
{NC, NP, 0}
};
#endif
#ifdef HAL_PCD_MODULE_ENABLED
const PinMap PinMap_USB_OTG_HS[] = {
//{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
//{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS

View File

@ -4,6 +4,7 @@
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -33,7 +34,6 @@
#undef HAL_SRAM_MODULE_ENABLED
#undef HAL_SDRAM_MODULE_ENABLED
#undef HAL_HASH_MODULE_ENABLED
#undef HAL_EXTI_MODULE_ENABLED
#undef HAL_SMBUS_MODULE_ENABLED
#undef HAL_I2S_MODULE_ENABLED
#undef HAL_IWDG_MODULE_ENABLED

View File

@ -4,6 +4,7 @@
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -32,7 +33,6 @@
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED

View File

@ -51,7 +51,7 @@ extern "C" {
#define HAL_DMA2D_MODULE_ENABLED
#define HAL_DSI_MODULE_ENABLED
#define HAL_ETH_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_FDCAN_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED

View File

@ -20,11 +20,6 @@ extern "C" {
*/
#include "stm32yyxx_hal_conf.h"
#undef HAL_PWR_MODULE_ENABLED
#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
#ifdef HAL_PCD_MODULE_ENABLED
#warning "No direct STM32 USB pins on Longer3D board"
#undef HAL_PCD_MODULE_ENABLED // USB Device
@ -35,20 +30,20 @@ extern "C" {
#undef HAL_HCD_MODULE_ENABLED // USB Host
#endif
#ifndef HAL_USART_MODULE_ENABLED
//#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it
#endif
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
#undef HAL_PWR_MODULE_ENABLED
#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
#undef HAL_CAN_LEGACY_MODULE_ENABLED
#undef HAL_CAN_MODULE_ENABLED
#undef HAL_DAC_MODULE_ENABLED
#undef HAL_RTC_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE
/**
* @brief List of modules in the framework (first ones enabled by default)
*/
* @brief List of modules in the framework (first ones enabled by default)
*/
//#define HAL_MODULE_ENABLED
//#define HAL_ADC_MODULE_ENABLED
//#define HAL_CORTEX_MODULE_ENABLED
@ -66,13 +61,11 @@ extern "C" {
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_TIM_MODULE_ENABLED
//#define HAL_UART_MODULE_ENABLED
//#define HAL_CAN_MODULE_ENABLED
//#define HAL_CAN_LEGACY_MODULE_ENABLED
//#define HAL_CEC_MODULE_ENABLED
//#define HAL_CRC_MODULE_ENABLED
//#define HAL_ETH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_HCD_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IRDA_MODULE_ENABLED
@ -81,7 +74,7 @@ extern "C" {
//#define HAL_NOR_MODULE_ENABLED
//#define HAL_PCCARD_MODULE_ENABLED
//#define HAL_SMARTCARD_MODULE_ENABLED
//#define HAL_USART_MODULE_ENABLED
//#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE does it
//#define HAL_WWDG_MODULE_ENABLED
//#define HAL_MMC_MODULE_ENABLED

View File

@ -41,7 +41,7 @@ extern "C" {
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED

View File

@ -36,6 +36,7 @@ extern "C" {
#define HAL_CRC_MODULE_ENABLED
#define HAL_DAC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
@ -61,7 +62,6 @@ extern "C" {
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED

View File

@ -40,6 +40,7 @@
#define HAL_CRC_MODULE_ENABLED
#define HAL_DAC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
@ -64,7 +65,6 @@
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED

View File

@ -35,6 +35,7 @@ extern "C" {
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
@ -61,7 +62,6 @@ extern "C" {
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_LTDC_MODULE_ENABLED

View File

@ -398,3 +398,21 @@ const PinMap PinMap_USB_OTG_HS[] = {
{NC, NP, 0}
};
#endif
//*** SD ***
#ifdef HAL_SD_MODULE_ENABLED
WEAK const PinMap PinMap_SD[] = {
//{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
//{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
//{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
//{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
{NC, NP, 0}
};
#endif

View File

@ -163,32 +163,37 @@ extern "C" {
// Below SPI and I2C definitions already done in the core
// Could be redefined here if differs from the default one
// SPI Definitions
#define PIN_SPI_SS PF11
#define PIN_SPI_MOSI PB15
#define PIN_SPI_MISO PB14
#define PIN_SPI_SCK PB13
// SPI1 (Winbond on the Lerdge-K)
//#define PIN_SPI_SS PC4
//#define PIN_SPI_SCK PA5
//#define PIN_SPI_MISO PA6
//#define PIN_SPI_MOSI PA7
// SPI2 (Winbond on the Lerdge-S)
//#define PIN_SPI_SS PB12
//#define PIN_SPI_SCK PB13
//#define PIN_SPI_MISO PB14
//#define PIN_SPI_MOSI PB15
//max6675
//#define PIN_SPI_SS PA4
//#define PIN_SPI_SCK PA5
//#define PIN_SPI_MISO PA6
//#define PIN_SPI_MOSI PA7
// I2C Definitions
#define PIN_WIRE_SDA PB7
#define PIN_WIRE_SCL PB6
// I2C Definitions (Software I2C)
//#define PIN_WIRE_SDA PG13
//#define PIN_WIRE_SCL PG14
// Timer Definitions
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
#define TIMER_TONE TIM6
// Do not use basic timer: OC is required
#define TIMER_SERVO TIM1 //TODO: advanced-control timers don't work
// Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
// FANs may require PWM timers 3 10 11 13
// The LED/RGB connectors timer 4
// Beware: STEP_TIMER default is 6 and TEMP_TIMER 14 for the F407
#ifndef TIMER_TONE
#define TIMER_TONE TIM8 // TIM3 or TIM8 for SPEAKER compat on the lerdge K (PC6)
#endif // TIM4 for that on the Lerdge S (PD11)
#ifndef TIMER_SERVO
#define TIMER_SERVO TIM1 // Ideally TIM2 for Hardware PWM (PB11)
#endif // TIM4 on the S (PD12)
#ifndef TIMER_SERIAL
#define TIMER_SERIAL TIM7 // Default used in SoftwareSerial lib
#endif
// UART Definitions
// Define here Serial instance number to map on Serial generic name
@ -208,6 +213,8 @@ extern "C" {
/* Extra HAL modules */
//#define HAL_DAC_MODULE_ENABLED
#define HAL_SD_MODULE_ENABLED
#define HAL_SRAM_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#ifdef __cplusplus
} // extern "C"

View File

@ -35,6 +35,7 @@ extern "C" {
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
@ -62,7 +63,6 @@ extern "C" {
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_LTDC_MODULE_ENABLED

View File

@ -36,6 +36,19 @@
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
//#define HAL_UART_MODULE_ENABLED // by default
//#define HAL_CAN_MODULE_ENABLED
//#define HAL_CAN_LEGACY_MODULE_ENABLED
//#define HAL_CRC_MODULE_ENABLED
@ -43,40 +56,28 @@
//#define HAL_CRYP_MODULE_ENABLED
//#define HAL_DAC_MODULE_ENABLED
//#define HAL_DCMI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
//#define HAL_DMA2D_MODULE_ENABLED
//#define HAL_ETH_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
//#define HAL_NAND_MODULE_ENABLED
//#define HAL_NOR_MODULE_ENABLED
//#define HAL_PCCARD_MODULE_ENABLED
//#define HAL_SRAM_MODULE_ENABLED
//#define HAL_SDRAM_MODULE_ENABLED
//#define HAL_HASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
//#define HAL_EXTI_MODULE_ENABLED
//#define HAL_I2C_MODULE_ENABLED
//#define HAL_SMBUS_MODULE_ENABLED
//#define HAL_I2S_MODULE_ENABLED
//#define HAL_IWDG_MODULE_ENABLED
//#define HAL_LTDC_MODULE_ENABLED
//#define HAL_DSI_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
//#define HAL_QSPI_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
//#define HAL_RNG_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED
//#define HAL_SAI_MODULE_ENABLED
//#define HAL_SD_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
//#define HAL_UART_MODULE_ENABLED // by default
#define HAL_USART_MODULE_ENABLED
//#define HAL_IRDA_MODULE_ENABLED
//#define HAL_SMARTCARD_MODULE_ENABLED
//#define HAL_WWDG_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
//#define HAL_HCD_MODULE_ENABLED
//#define HAL_FMPI2C_MODULE_ENABLED
//#define HAL_SPDIFRX_MODULE_ENABLED

View File

@ -255,14 +255,13 @@ board_build.encrypt = firmware.bin
board_build.offset = 0x10000
build_flags = ${stm32_variant.build_flags}
-DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
-DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
-DHAL_SRAM_MODULE_ENABLED
-DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DLERDGE_TFT35
build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
extra_scripts = ${stm32_variant.extra_scripts}
buildroot/share/PlatformIO/scripts/lerdge.py
#
# Lerdge X
# Lerdge X (STM32F407VE)
#
[env:LERDGEX]
platform = ${lerdge_common.platform}
@ -279,7 +278,7 @@ platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
#
# Lerdge S
# Lerdge S (STM32F407ZG)
#
[env:LERDGES]
platform = ${lerdge_common.platform}
@ -296,7 +295,7 @@ platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
#
# Lerdge K
# Lerdge K (STM32F407ZG)
#
[env:LERDGEK]
platform = ${lerdge_common.platform}