From 62db9848d3f9ffcfe73e74cc7069fb4fe2b63b64 Mon Sep 17 00:00:00 2001 From: Filip Mulier Date: Sat, 16 Aug 2014 06:50:13 -0500 Subject: [PATCH] Improvements and bug fixes in sensor delay buffer for filament sensor code Improvement to avoid reinitializing delay buffer with every print. Fixed issues in buffer indexing and memory out of bounds due to floating point imprecision. Simplified the code by avoiding conversion to standard diameter and 1cu mm extrusion, which caused complications in determining mm extruded. --- Marlin/Marlin.h | 4 ++-- Marlin/Marlin_main.cpp | 40 +++++++++++++++++++++------------------- Marlin/planner.cpp | 28 ++++++++++++++++++++++------ Marlin/temperature.cpp | 22 ++++++++++++++-------- 4 files changed, 59 insertions(+), 35 deletions(-) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 3fb6ec5531..7ced062964 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -230,8 +230,8 @@ extern unsigned char fanSpeedSoftPwm; #endif #ifdef FILAMENT_SENSOR - extern volatile float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75 - extern volatile bool filament_sensor; //indicates that filament sensor readings should control extrusion + extern float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75 + extern bool filament_sensor; //indicates that filament sensor readings should control extrusion extern float filament_width_meas; //holds the filament diameter as accurately measured extern signed char measurement_delay[]; //ring buffer to delay measurement extern int delay_index1, delay_index2; //index into ring buffer diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 48d867c833..6ce02d364a 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -302,12 +302,12 @@ bool cancel_heatup = false ; #ifdef FILAMENT_SENSOR //Variables for Filament Sensor input - volatile float filament_width_nominal=DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404 - volatile bool filament_sensor=false; //M405 turns on filament_sensor control, M406 turns it off + float filament_width_nominal=DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404 + bool filament_sensor=false; //M405 turns on filament_sensor control, M406 turns it off float filament_width_meas=DEFAULT_MEASURED_FILAMENT_DIA; //Stores the measured filament diameter signed char measurement_delay[MAX_MEASUREMENT_DELAY+1]; //ring buffer to delay measurement store extruder factor after subtracting 100 - int delay_index1=0; - int delay_index2=0; //index into ring buffer + int delay_index1=0; //index into ring buffer + int delay_index2=-1; //index into ring buffer - set to -1 on startup to indicate ring buffer needs to be initialized float delay_dist=0; //delay distance counter int meas_delay_cm = MEASUREMENT_DELAY_CM; //distance delay setting #endif @@ -504,6 +504,7 @@ void servo_init() #endif } + void setup() { setup_killpin(); @@ -553,6 +554,7 @@ void setup() st_init(); // Initialize stepper, this enables interrupts! setup_photpin(); servo_init(); + lcd_init(); _delay_ms(1000); // wait 1sec to display the splash screen @@ -2333,12 +2335,8 @@ void process_commands() } } else { //reserved for setting filament diameter via UFID or filament measuring device - if(active_extruder == FILAMENT_SENSOR_EXTRUDER_NUM){ - radius = analog2widthFil() * 0.5; - area = M_PI * pow(radius, 2); - }else{ - area = 1.0; - } + break; + } tmp_extruder = active_extruder; @@ -2816,15 +2814,19 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp if(meas_delay_cm> MAX_MEASUREMENT_DELAY) meas_delay_cm = MAX_MEASUREMENT_DELAY; - filament_sensor = true ; - int temp_ratio = widthFil_to_size_ratio(); + if(delay_index2 == -1) //initialize the ring buffer if it has not been done since startup + { + int temp_ratio = widthFil_to_size_ratio(); + + for (delay_index1=0; delay_index1<(MAX_MEASUREMENT_DELAY+1); ++delay_index1 ){ + measurement_delay[delay_index1]=temp_ratio-100; //subtract 100 to scale within a signed byte + } + delay_index1=0; + delay_index2=0; + } + + filament_sensor = true ; - for (delay_index1=0; delay_index1<(MAX_MEASUREMENT_DELAY+1); ++delay_index1 ){ - measurement_delay[delay_index1]=temp_ratio-100; //subtract 100 to scale within a signed byte - } - delay_index1=0; - delay_index2=0; - //SERIAL_PROTOCOLPGM("Filament dia (measured mm):"); //SERIAL_PROTOCOL(filament_width_meas); //SERIAL_PROTOCOLPGM("Extrusion ratio(%):"); @@ -2841,7 +2843,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp case 407: //M407 Display measured filament diameter { - filament_width_meas = code_value(); + SERIAL_PROTOCOLPGM("Filament dia (measured mm):"); SERIAL_PROTOCOLLN(filament_width_meas); diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index fefae6e181..aac41faa7b 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -743,15 +743,25 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi #ifdef FILAMENT_SENSOR //FMM update ring buffer used for delay with filament measurements - - if(filament_sensor && (extruder==0)) //only for extruder 0 + + + if((extruder==FILAMENT_SENSOR_EXTRUDER_NUM) && (delay_index2 > -1)) //only for extruder with filament sensor and if ring buffer is initialized { delay_dist = delay_dist + delta_mm[E_AXIS]; //increment counter with next move in e axis - if (delay_dist> (10*(MAX_MEASUREMENT_DELAY+1))) //check if counter is over max buffer size in mm + + while (delay_dist >= (10*(MAX_MEASUREMENT_DELAY+1))) //check if counter is over max buffer size in mm delay_dist = delay_dist - 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer - if(delay_dist<0) + while (delay_dist<0) delay_dist = delay_dist + 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer - delay_index1=delay_dist/10; //calculate index + + delay_index1=delay_dist/10.0; //calculate index + + //ensure the number is within range of the array after converting from floating point + if(delay_index1<0) + delay_index1=0; + else if (delay_index1>MAX_MEASUREMENT_DELAY) + delay_index1=MAX_MEASUREMENT_DELAY; + if(delay_index1 != delay_index2) //moved index { meas_sample=widthFil_to_size_ratio()-100; //subtract off 100 to reduce magnitude - to store in a signed char @@ -761,10 +771,16 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi delay_index2 = delay_index2 + 1; if(delay_index2>MAX_MEASUREMENT_DELAY) delay_index2=delay_index2-(MAX_MEASUREMENT_DELAY+1); //loop around buffer when incrementing + if(delay_index2<0) + delay_index2=0; + else if (delay_index2>MAX_MEASUREMENT_DELAY) + delay_index2=MAX_MEASUREMENT_DELAY; + measurement_delay[delay_index2]=meas_sample; } + - } + } #endif diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 467b6dbdb3..46cdc7cfbb 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -617,9 +617,16 @@ void manage_heater() meas_shift_index = meas_shift_index + (MAX_MEASUREMENT_DELAY+1); //loop around buffer if needed //get the delayed info and add 100 to reconstitute to a percent of the nominal filament diameter - //then adjust as a factor to the Standard Diameter (has an area of 1mm squared) //then square it to get an area - volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] = pow((float)(100+measurement_delay[meas_shift_index])/filament_width_nominal*STANDARD_DIA/100.0,2); + + if(meas_shift_index<0) + meas_shift_index=0; + else if (meas_shift_index>MAX_MEASUREMENT_DELAY) + meas_shift_index=MAX_MEASUREMENT_DELAY; + + volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] = pow((float)(100+measurement_delay[meas_shift_index])/100.0,2); + if (volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] <0.01) + volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]=0.01; } #endif } @@ -715,6 +722,9 @@ static void updateTemperaturesFromRawValues() #ifdef TEMP_SENSOR_1_AS_REDUNDANT redundant_temperature = analog2temp(redundant_temperature_raw, 1); #endif + #ifdef FILAMENT_SENSOR && (FILWIDTH_PIN > -1) //check if a sensor is supported + filament_width_meas = analog2widthFil(); + #endif //Reset the watchdog after we know we have a temperature measurement. watchdog_reset(); @@ -731,15 +741,11 @@ return current_raw_filwidth/16383.0*5.0; //return current_raw_filwidth; } -// For converting raw Filament Width to an volumetric ratio +// For converting raw Filament Width to a ratio int widthFil_to_size_ratio() { float temp; - -#if (FILWIDTH_PIN > -1) //check if a sensor is supported -filament_width_meas=current_raw_filwidth/16383.0*5.0; -#endif - + temp=filament_width_meas; if(filament_width_meas