Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 (#20354)

This commit is contained in:
Foxies 2020-12-20 07:17:24 +01:00 committed by Scott Lahteine
parent 56e2f39175
commit 642110b072
2 changed files with 49 additions and 39 deletions

View File

@ -60,6 +60,9 @@
// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
//
#define SPI_DEVICE 2
#define SCK_PIN PB13 // SPI2
#define MISO_PIN PB14 // SPI2
#define MOSI_PIN PB15 // SPI2
// SPI Flash
#define HAS_SPI_FLASH 1
@ -269,6 +272,12 @@
#error "FLSun HiSpeed default BEEPER_PIN is not a SPEAKER."
#endif
#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT
#define TFT_CS_PIN PD7 // NE4
#define TFT_RS_PIN PD11 // A0
#endif
#if HAS_FSMC_TFT
/**
* Note: MKS Robin TFT screens use various TFT controllers
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
@ -281,31 +290,24 @@
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/
// QQS-Pro uses MKS Robin TFT v2.0 320x240
// Shared FSMC Configs
#if HAS_FSMC_TFT
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define TFT_RESET_PIN PC6 // FSMC_RST
//#define TFT_RESET_PIN PC6 // FSMC_RST
#define TFT_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN TFT_CS_PIN // NE4
#define FSMC_RS_PIN TFT_RS_PIN // A0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TFT_BUFFER_SIZE 14400
#if ENABLED(TFT_CLASSIC_UI)
#define TFT_MARLINBG_COLOR 0x3186 // White
#define TFT_MARLINUI_COLOR 0xC7B6 // green
#ifdef TFT_CLASSIC_UI
#define TFT_MARLINBG_COLOR 0x3186 // Grey
#define TFT_MARLINUI_COLOR 0xC7B6 // Green
#define TFT_BTARROWS_COLOR 0xDEE6 // Yellow
#define TFT_BTOKMENU_COLOR 0x145F // Cyan
#endif
#define TFT_BUFFER_SIZE 14400
#elif HAS_GRAPHICAL_TFT
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#endif
#if NEED_TOUCH_PINS
@ -313,4 +315,5 @@
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#define TOUCH_INT_PIN -1
#endif

View File

@ -1150,18 +1150,25 @@ debug_tool = jlink
upload_protocol = jlink
#
# FLSUN QQ (STM32F103VET6)
# FLSUN QQS Pro (STM32F103VET6) using hal STM32
# board Hispeedv1
#
[env:flsun_hispeed]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
[env:flsun_hispeedv1]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
board = genericSTM32F103VE
board_build.core = stm32
board_build.variant = MARLIN_F103Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.firmware = Robin_mini.bin
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
buildroot/share/PlatformIO/scripts/add_nanolib.py
build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
lib_deps = SoftwareSerialM
#Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
#
# STM32F401VE