Merge pull request #5557 from thinkyhead/rc_thermistor_breakup

Split up thermistor tables
This commit is contained in:
Scott Lahteine 2016-12-19 15:01:18 -08:00 committed by GitHub
commit 64a44f697c
29 changed files with 1967 additions and 1366 deletions

View File

@ -27,7 +27,7 @@
#if F_CPU == 16000000
const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {\
const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {
{ 62500, 55556}, { 6944, 3268}, { 3676, 1176}, { 2500, 607}, { 1893, 369}, { 1524, 249}, { 1275, 179}, { 1096, 135},
{ 961, 105}, { 856, 85}, { 771, 69}, { 702, 58}, { 644, 49}, { 595, 42}, { 553, 37}, { 516, 32},
{ 484, 28}, { 456, 25}, { 431, 23}, { 408, 20}, { 388, 19}, { 369, 16}, { 353, 16}, { 337, 14},
@ -60,9 +60,9 @@ const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {\
{ 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 1}, { 32, 0}, { 32, 0}, { 32, 0},
{ 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 1}, { 31, 0}, { 31, 0}, { 31, 0},
{ 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0}
};
};
const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {\
const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {
{ 62500, 12500}, { 50000, 8334}, { 41666, 5952}, { 35714, 4464}, { 31250, 3473}, { 27777, 2777}, { 25000, 2273}, { 22727, 1894},
{ 20833, 1603}, { 19230, 1373}, { 17857, 1191}, { 16666, 1041}, { 15625, 920}, { 14705, 817}, { 13888, 731}, { 13157, 657},
{ 12500, 596}, { 11904, 541}, { 11363, 494}, { 10869, 453}, { 10416, 416}, { 10000, 385}, { 9615, 356}, { 9259, 331},
@ -95,11 +95,11 @@ const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {\
{ 1059, 5}, { 1054, 4}, { 1050, 4}, { 1046, 5}, { 1041, 4}, { 1037, 4}, { 1033, 5}, { 1028, 4},
{ 1024, 4}, { 1020, 4}, { 1016, 4}, { 1012, 4}, { 1008, 4}, { 1004, 4}, { 1000, 4}, { 996, 4},
{ 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3}
};
};
#elif F_CPU == 20000000
const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {
const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {
{62500, 54055}, {8445, 3917}, {4528, 1434}, {3094, 745}, {2349, 456}, {1893, 307}, {1586, 222}, {1364, 167},
{1197, 131}, {1066, 105}, {961, 86}, {875, 72}, {803, 61}, {742, 53}, {689, 45}, {644, 40},
{604, 35}, {569, 32}, {537, 28}, {509, 25}, {484, 23}, {461, 21}, {440, 19}, {421, 17},
@ -132,9 +132,9 @@ const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {
{42, 1}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 1}, {40, 0},
{40, 0}, {40, 0}, {40, 0}, {40, 1}, {39, 0}, {39, 0}, {39, 0}, {39, 0},
{39, 0}, {39, 0}, {39, 1}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, {38, 0},
};
};
const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {
const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {
{62500, 10417}, {52083, 7441}, {44642, 5580}, {39062, 4340}, {34722, 3472}, {31250, 2841}, {28409, 2368}, {26041, 2003},
{24038, 1717}, {22321, 1488}, {20833, 1302}, {19531, 1149}, {18382, 1021}, {17361, 914}, {16447, 822}, {15625, 745},
{14880, 676}, {14204, 618}, {13586, 566}, {13020, 520}, {12500, 481}, {12019, 445}, {11574, 414}, {11160, 385},
@ -167,8 +167,8 @@ const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {
{1318, 5}, {1313, 6}, {1307, 5}, {1302, 6}, {1296, 5}, {1291, 5}, {1286, 6}, {1280, 5},
{1275, 5}, {1270, 5}, {1265, 5}, {1260, 5}, {1255, 5}, {1250, 5}, {1245, 5}, {1240, 5},
{1235, 5}, {1230, 5}, {1225, 5}, {1220, 5}, {1215, 4}, {1211, 5}, {1206, 5}, {1201, 5},
};
};
#endif
#endif
#endif // SPEED_LOOKUPTABLE_H

View File

@ -0,0 +1,89 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k bed thermistor
const short temptable_1[][2] PROGMEM = {
{ 23 * OVERSAMPLENR, 300 },
{ 25 * OVERSAMPLENR, 295 },
{ 27 * OVERSAMPLENR, 290 },
{ 28 * OVERSAMPLENR, 285 },
{ 31 * OVERSAMPLENR, 280 },
{ 33 * OVERSAMPLENR, 275 },
{ 35 * OVERSAMPLENR, 270 },
{ 38 * OVERSAMPLENR, 265 },
{ 41 * OVERSAMPLENR, 260 },
{ 44 * OVERSAMPLENR, 255 },
{ 48 * OVERSAMPLENR, 250 },
{ 52 * OVERSAMPLENR, 245 },
{ 56 * OVERSAMPLENR, 240 },
{ 61 * OVERSAMPLENR, 235 },
{ 66 * OVERSAMPLENR, 230 },
{ 71 * OVERSAMPLENR, 225 },
{ 78 * OVERSAMPLENR, 220 },
{ 84 * OVERSAMPLENR, 215 },
{ 92 * OVERSAMPLENR, 210 },
{ 100 * OVERSAMPLENR, 205 },
{ 109 * OVERSAMPLENR, 200 },
{ 120 * OVERSAMPLENR, 195 },
{ 131 * OVERSAMPLENR, 190 },
{ 143 * OVERSAMPLENR, 185 },
{ 156 * OVERSAMPLENR, 180 },
{ 171 * OVERSAMPLENR, 175 },
{ 187 * OVERSAMPLENR, 170 },
{ 205 * OVERSAMPLENR, 165 },
{ 224 * OVERSAMPLENR, 160 },
{ 245 * OVERSAMPLENR, 155 },
{ 268 * OVERSAMPLENR, 150 },
{ 293 * OVERSAMPLENR, 145 },
{ 320 * OVERSAMPLENR, 140 },
{ 348 * OVERSAMPLENR, 135 },
{ 379 * OVERSAMPLENR, 130 },
{ 411 * OVERSAMPLENR, 125 },
{ 445 * OVERSAMPLENR, 120 },
{ 480 * OVERSAMPLENR, 115 },
{ 516 * OVERSAMPLENR, 110 },
{ 553 * OVERSAMPLENR, 105 },
{ 591 * OVERSAMPLENR, 100 },
{ 628 * OVERSAMPLENR, 95 },
{ 665 * OVERSAMPLENR, 90 },
{ 702 * OVERSAMPLENR, 85 },
{ 737 * OVERSAMPLENR, 80 },
{ 770 * OVERSAMPLENR, 75 },
{ 801 * OVERSAMPLENR, 70 },
{ 830 * OVERSAMPLENR, 65 },
{ 857 * OVERSAMPLENR, 60 },
{ 881 * OVERSAMPLENR, 55 },
{ 903 * OVERSAMPLENR, 50 },
{ 922 * OVERSAMPLENR, 45 },
{ 939 * OVERSAMPLENR, 40 },
{ 954 * OVERSAMPLENR, 35 },
{ 966 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 985 * OVERSAMPLENR, 20 },
{ 993 * OVERSAMPLENR, 15 },
{ 999 * OVERSAMPLENR, 10 },
{ 1004 * OVERSAMPLENR, 5 },
{ 1008 * OVERSAMPLENR, 0 },
{ 1012 * OVERSAMPLENR, -5 },
{ 1016 * OVERSAMPLENR, -10 },
{ 1020 * OVERSAMPLENR, -15 }
};

View File

@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k RS thermistor 198-961 (4.7k pullup)
const short temptable_10[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 929 },
{ 36 * OVERSAMPLENR, 299 },
{ 71 * OVERSAMPLENR, 246 },
{ 106 * OVERSAMPLENR, 217 },
{ 141 * OVERSAMPLENR, 198 },
{ 176 * OVERSAMPLENR, 184 },
{ 211 * OVERSAMPLENR, 173 },
{ 246 * OVERSAMPLENR, 163 },
{ 281 * OVERSAMPLENR, 154 },
{ 316 * OVERSAMPLENR, 147 },
{ 351 * OVERSAMPLENR, 140 },
{ 386 * OVERSAMPLENR, 134 },
{ 421 * OVERSAMPLENR, 128 },
{ 456 * OVERSAMPLENR, 122 },
{ 491 * OVERSAMPLENR, 117 },
{ 526 * OVERSAMPLENR, 112 },
{ 561 * OVERSAMPLENR, 107 },
{ 596 * OVERSAMPLENR, 102 },
{ 631 * OVERSAMPLENR, 97 },
{ 666 * OVERSAMPLENR, 91 },
{ 701 * OVERSAMPLENR, 86 },
{ 736 * OVERSAMPLENR, 81 },
{ 771 * OVERSAMPLENR, 76 },
{ 806 * OVERSAMPLENR, 70 },
{ 841 * OVERSAMPLENR, 63 },
{ 876 * OVERSAMPLENR, 56 },
{ 911 * OVERSAMPLENR, 48 },
{ 946 * OVERSAMPLENR, 38 },
{ 981 * OVERSAMPLENR, 23 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1016 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Pt1000 with 1k0 pullup
const short temptable_1010[][2] PROGMEM = {
PtLine( 0, 1000, 1000)
PtLine( 25, 1000, 1000)
PtLine( 50, 1000, 1000)
PtLine( 75, 1000, 1000)
PtLine(100, 1000, 1000)
PtLine(125, 1000, 1000)
PtLine(150, 1000, 1000)
PtLine(175, 1000, 1000)
PtLine(200, 1000, 1000)
PtLine(225, 1000, 1000)
PtLine(250, 1000, 1000)
PtLine(275, 1000, 1000)
PtLine(300, 1000, 1000)
};

View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Pt1000 with 4k7 pullup
const short temptable_1047[][2] PROGMEM = {
// only a few values are needed as the curve is very flat
PtLine( 0, 1000, 4700)
PtLine( 50, 1000, 4700)
PtLine(100, 1000, 4700)
PtLine(150, 1000, 4700)
PtLine(200, 1000, 4700)
PtLine(250, 1000, 4700)
PtLine(300, 1000, 4700)
};

View File

@ -0,0 +1,75 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 938 },
{ 31 * OVERSAMPLENR, 314 },
{ 41 * OVERSAMPLENR, 290 },
{ 51 * OVERSAMPLENR, 272 },
{ 61 * OVERSAMPLENR, 258 },
{ 71 * OVERSAMPLENR, 247 },
{ 81 * OVERSAMPLENR, 237 },
{ 91 * OVERSAMPLENR, 229 },
{ 101 * OVERSAMPLENR, 221 },
{ 111 * OVERSAMPLENR, 215 },
{ 121 * OVERSAMPLENR, 209 },
{ 131 * OVERSAMPLENR, 204 },
{ 141 * OVERSAMPLENR, 199 },
{ 151 * OVERSAMPLENR, 195 },
{ 161 * OVERSAMPLENR, 190 },
{ 171 * OVERSAMPLENR, 187 },
{ 181 * OVERSAMPLENR, 183 },
{ 191 * OVERSAMPLENR, 179 },
{ 201 * OVERSAMPLENR, 176 },
{ 221 * OVERSAMPLENR, 170 },
{ 241 * OVERSAMPLENR, 165 },
{ 261 * OVERSAMPLENR, 160 },
{ 281 * OVERSAMPLENR, 155 },
{ 301 * OVERSAMPLENR, 150 },
{ 331 * OVERSAMPLENR, 144 },
{ 361 * OVERSAMPLENR, 139 },
{ 391 * OVERSAMPLENR, 133 },
{ 421 * OVERSAMPLENR, 128 },
{ 451 * OVERSAMPLENR, 123 },
{ 491 * OVERSAMPLENR, 117 },
{ 531 * OVERSAMPLENR, 111 },
{ 571 * OVERSAMPLENR, 105 },
{ 611 * OVERSAMPLENR, 100 },
{ 641 * OVERSAMPLENR, 95 },
{ 681 * OVERSAMPLENR, 90 },
{ 711 * OVERSAMPLENR, 85 },
{ 751 * OVERSAMPLENR, 79 },
{ 791 * OVERSAMPLENR, 72 },
{ 811 * OVERSAMPLENR, 69 },
{ 831 * OVERSAMPLENR, 65 },
{ 871 * OVERSAMPLENR, 57 },
{ 881 * OVERSAMPLENR, 55 },
{ 901 * OVERSAMPLENR, 51 },
{ 921 * OVERSAMPLENR, 45 },
{ 941 * OVERSAMPLENR, 39 },
{ 971 * OVERSAMPLENR, 28 },
{ 981 * OVERSAMPLENR, 23 },
{ 991 * OVERSAMPLENR, 17 },
{ 1001 * OVERSAMPLENR, 9 },
{ 1021 * OVERSAMPLENR, -27 }
};

View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Pt100 with 1k0 pullup
const short temptable_110[][2] PROGMEM = {
// only a few values are needed as the curve is very flat
PtLine( 0, 100, 1000)
PtLine( 50, 100, 1000)
PtLine(100, 100, 1000)
PtLine(150, 100, 1000)
PtLine(200, 100, 1000)
PtLine(250, 100, 1000)
PtLine(300, 100, 1000)
};

View File

@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
const short temptable_12[][2] PROGMEM = {
{ 35 * OVERSAMPLENR, 180 }, // top rating 180C
{ 211 * OVERSAMPLENR, 140 },
{ 233 * OVERSAMPLENR, 135 },
{ 261 * OVERSAMPLENR, 130 },
{ 290 * OVERSAMPLENR, 125 },
{ 328 * OVERSAMPLENR, 120 },
{ 362 * OVERSAMPLENR, 115 },
{ 406 * OVERSAMPLENR, 110 },
{ 446 * OVERSAMPLENR, 105 },
{ 496 * OVERSAMPLENR, 100 },
{ 539 * OVERSAMPLENR, 95 },
{ 585 * OVERSAMPLENR, 90 },
{ 629 * OVERSAMPLENR, 85 },
{ 675 * OVERSAMPLENR, 80 },
{ 718 * OVERSAMPLENR, 75 },
{ 758 * OVERSAMPLENR, 70 },
{ 793 * OVERSAMPLENR, 65 },
{ 822 * OVERSAMPLENR, 60 },
{ 841 * OVERSAMPLENR, 55 },
{ 875 * OVERSAMPLENR, 50 },
{ 899 * OVERSAMPLENR, 45 },
{ 926 * OVERSAMPLENR, 40 },
{ 946 * OVERSAMPLENR, 35 },
{ 962 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 987 * OVERSAMPLENR, 20 },
{ 995 * OVERSAMPLENR, 15 },
{ 1001 * OVERSAMPLENR, 10 },
{ 1010 * OVERSAMPLENR, 0 },
{ 1023 * OVERSAMPLENR, -40 }
};

View File

@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Hisens thermistor B25/50 =3950 +/-1%
const short temptable_13[][2] PROGMEM = {
{ 20.04 * OVERSAMPLENR, 300 },
{ 23.19 * OVERSAMPLENR, 290 },
{ 26.71 * OVERSAMPLENR, 280 },
{ 31.23 * OVERSAMPLENR, 270 },
{ 36.52 * OVERSAMPLENR, 260 },
{ 42.75 * OVERSAMPLENR, 250 },
{ 50.68 * OVERSAMPLENR, 240 },
{ 60.22 * OVERSAMPLENR, 230 },
{ 72.03 * OVERSAMPLENR, 220 },
{ 86.84 * OVERSAMPLENR, 210 },
{ 102.79 * OVERSAMPLENR, 200 },
{ 124.46 * OVERSAMPLENR, 190 },
{ 151.02 * OVERSAMPLENR, 180 },
{ 182.86 * OVERSAMPLENR, 170 },
{ 220.72 * OVERSAMPLENR, 160 },
{ 316.96 * OVERSAMPLENR, 140 },
{ 447.17 * OVERSAMPLENR, 120 },
{ 590.61 * OVERSAMPLENR, 100 },
{ 737.31 * OVERSAMPLENR, 80 },
{ 857.77 * OVERSAMPLENR, 60 },
{ 939.52 * OVERSAMPLENR, 40 },
{ 986.03 * OVERSAMPLENR, 20 },
{ 1008.7 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Pt100 with 4k7 pullup
const short temptable_147[][2] PROGMEM = {
// only a few values are needed as the curve is very flat
PtLine( 0, 100, 4700)
PtLine( 50, 100, 4700)
PtLine(100, 100, 4700)
PtLine(150, 100, 4700)
PtLine(200, 100, 4700)
PtLine(250, 100, 4700)
PtLine(300, 100, 4700)
};

View File

@ -0,0 +1,61 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// 200k ATC Semitec 204GT-2
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
//
const short temptable_2[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 848 },
{ 30 * OVERSAMPLENR, 300 }, // top rating 300C
{ 34 * OVERSAMPLENR, 290 },
{ 39 * OVERSAMPLENR, 280 },
{ 46 * OVERSAMPLENR, 270 },
{ 53 * OVERSAMPLENR, 260 },
{ 63 * OVERSAMPLENR, 250 },
{ 74 * OVERSAMPLENR, 240 },
{ 87 * OVERSAMPLENR, 230 },
{ 104 * OVERSAMPLENR, 220 },
{ 124 * OVERSAMPLENR, 210 },
{ 148 * OVERSAMPLENR, 200 },
{ 176 * OVERSAMPLENR, 190 },
{ 211 * OVERSAMPLENR, 180 },
{ 252 * OVERSAMPLENR, 170 },
{ 301 * OVERSAMPLENR, 160 },
{ 357 * OVERSAMPLENR, 150 },
{ 420 * OVERSAMPLENR, 140 },
{ 489 * OVERSAMPLENR, 130 },
{ 562 * OVERSAMPLENR, 120 },
{ 636 * OVERSAMPLENR, 110 },
{ 708 * OVERSAMPLENR, 100 },
{ 775 * OVERSAMPLENR, 90 },
{ 835 * OVERSAMPLENR, 80 },
{ 884 * OVERSAMPLENR, 70 },
{ 924 * OVERSAMPLENR, 60 },
{ 955 * OVERSAMPLENR, 50 },
{ 977 * OVERSAMPLENR, 40 },
{ 993 * OVERSAMPLENR, 30 },
{ 1004 * OVERSAMPLENR, 20 },
{ 1012 * OVERSAMPLENR, 10 },
{ 1016 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,96 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines
#if (THERMISTORHEATER_0 == 20)
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_1 == 20)
#define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_2 == 20)
#define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_3 == 20)
#define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0
#endif
#if (THERMISTORBED == 20)
#define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0
#endif
const short temptable_20[][2] PROGMEM = {
{ 0 * OVERSAMPLENR, 0 },
{ 227 * OVERSAMPLENR, 1 },
{ 236 * OVERSAMPLENR, 10 },
{ 245 * OVERSAMPLENR, 20 },
{ 253 * OVERSAMPLENR, 30 },
{ 262 * OVERSAMPLENR, 40 },
{ 270 * OVERSAMPLENR, 50 },
{ 279 * OVERSAMPLENR, 60 },
{ 287 * OVERSAMPLENR, 70 },
{ 295 * OVERSAMPLENR, 80 },
{ 304 * OVERSAMPLENR, 90 },
{ 312 * OVERSAMPLENR, 100 },
{ 320 * OVERSAMPLENR, 110 },
{ 329 * OVERSAMPLENR, 120 },
{ 337 * OVERSAMPLENR, 130 },
{ 345 * OVERSAMPLENR, 140 },
{ 353 * OVERSAMPLENR, 150 },
{ 361 * OVERSAMPLENR, 160 },
{ 369 * OVERSAMPLENR, 170 },
{ 377 * OVERSAMPLENR, 180 },
{ 385 * OVERSAMPLENR, 190 },
{ 393 * OVERSAMPLENR, 200 },
{ 401 * OVERSAMPLENR, 210 },
{ 409 * OVERSAMPLENR, 220 },
{ 417 * OVERSAMPLENR, 230 },
{ 424 * OVERSAMPLENR, 240 },
{ 432 * OVERSAMPLENR, 250 },
{ 440 * OVERSAMPLENR, 260 },
{ 447 * OVERSAMPLENR, 270 },
{ 455 * OVERSAMPLENR, 280 },
{ 463 * OVERSAMPLENR, 290 },
{ 470 * OVERSAMPLENR, 300 },
{ 478 * OVERSAMPLENR, 310 },
{ 485 * OVERSAMPLENR, 320 },
{ 493 * OVERSAMPLENR, 330 },
{ 500 * OVERSAMPLENR, 340 },
{ 507 * OVERSAMPLENR, 350 },
{ 515 * OVERSAMPLENR, 360 },
{ 522 * OVERSAMPLENR, 370 },
{ 529 * OVERSAMPLENR, 380 },
{ 537 * OVERSAMPLENR, 390 },
{ 544 * OVERSAMPLENR, 400 },
{ 614 * OVERSAMPLENR, 500 },
{ 681 * OVERSAMPLENR, 600 },
{ 744 * OVERSAMPLENR, 700 },
{ 805 * OVERSAMPLENR, 800 },
{ 862 * OVERSAMPLENR, 900 },
{ 917 * OVERSAMPLENR, 1000 },
{ 968 * OVERSAMPLENR, 1100 }
};

View File

@ -0,0 +1,53 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// mendel-parts
const short temptable_3[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 864 },
{ 21 * OVERSAMPLENR, 300 },
{ 25 * OVERSAMPLENR, 290 },
{ 29 * OVERSAMPLENR, 280 },
{ 33 * OVERSAMPLENR, 270 },
{ 39 * OVERSAMPLENR, 260 },
{ 46 * OVERSAMPLENR, 250 },
{ 54 * OVERSAMPLENR, 240 },
{ 64 * OVERSAMPLENR, 230 },
{ 75 * OVERSAMPLENR, 220 },
{ 90 * OVERSAMPLENR, 210 },
{ 107 * OVERSAMPLENR, 200 },
{ 128 * OVERSAMPLENR, 190 },
{ 154 * OVERSAMPLENR, 180 },
{ 184 * OVERSAMPLENR, 170 },
{ 221 * OVERSAMPLENR, 160 },
{ 265 * OVERSAMPLENR, 150 },
{ 316 * OVERSAMPLENR, 140 },
{ 375 * OVERSAMPLENR, 130 },
{ 441 * OVERSAMPLENR, 120 },
{ 513 * OVERSAMPLENR, 110 },
{ 588 * OVERSAMPLENR, 100 },
{ 734 * OVERSAMPLENR, 80 },
{ 856 * OVERSAMPLENR, 60 },
{ 938 * OVERSAMPLENR, 40 },
{ 986 * OVERSAMPLENR, 20 },
{ 1008 * OVERSAMPLENR, 0 },
{ 1018 * OVERSAMPLENR, -20 }
};

View File

@ -0,0 +1,45 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 10k thermistor
const short temptable_4[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 430 },
{ 54 * OVERSAMPLENR, 137 },
{ 107 * OVERSAMPLENR, 107 },
{ 160 * OVERSAMPLENR, 91 },
{ 213 * OVERSAMPLENR, 80 },
{ 266 * OVERSAMPLENR, 71 },
{ 319 * OVERSAMPLENR, 64 },
{ 372 * OVERSAMPLENR, 57 },
{ 425 * OVERSAMPLENR, 51 },
{ 478 * OVERSAMPLENR, 46 },
{ 531 * OVERSAMPLENR, 41 },
{ 584 * OVERSAMPLENR, 35 },
{ 637 * OVERSAMPLENR, 30 },
{ 690 * OVERSAMPLENR, 25 },
{ 743 * OVERSAMPLENR, 20 },
{ 796 * OVERSAMPLENR, 14 },
{ 849 * OVERSAMPLENR, 7 },
{ 902 * OVERSAMPLENR, 0 },
{ 955 * OVERSAMPLENR, -11 },
{ 1008 * OVERSAMPLENR, -35 }
};

View File

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k ParCan thermistor (104GT-2)
// ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
const short temptable_5[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 713 },
{ 17 * OVERSAMPLENR, 300 }, // top rating 300C
{ 20 * OVERSAMPLENR, 290 },
{ 23 * OVERSAMPLENR, 280 },
{ 27 * OVERSAMPLENR, 270 },
{ 31 * OVERSAMPLENR, 260 },
{ 37 * OVERSAMPLENR, 250 },
{ 43 * OVERSAMPLENR, 240 },
{ 51 * OVERSAMPLENR, 230 },
{ 61 * OVERSAMPLENR, 220 },
{ 73 * OVERSAMPLENR, 210 },
{ 87 * OVERSAMPLENR, 200 },
{ 106 * OVERSAMPLENR, 190 },
{ 128 * OVERSAMPLENR, 180 },
{ 155 * OVERSAMPLENR, 170 },
{ 189 * OVERSAMPLENR, 160 },
{ 230 * OVERSAMPLENR, 150 },
{ 278 * OVERSAMPLENR, 140 },
{ 336 * OVERSAMPLENR, 130 },
{ 402 * OVERSAMPLENR, 120 },
{ 476 * OVERSAMPLENR, 110 },
{ 554 * OVERSAMPLENR, 100 },
{ 635 * OVERSAMPLENR, 90 },
{ 713 * OVERSAMPLENR, 80 },
{ 784 * OVERSAMPLENR, 70 },
{ 846 * OVERSAMPLENR, 60 },
{ 897 * OVERSAMPLENR, 50 },
{ 937 * OVERSAMPLENR, 40 },
{ 966 * OVERSAMPLENR, 30 },
{ 986 * OVERSAMPLENR, 20 },
{ 1000 * OVERSAMPLENR, 10 },
{ 1010 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,81 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee.
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: Twice the resolution and better linearity from 150C to 200C
const short temptable_51[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 350 },
{ 190 * OVERSAMPLENR, 250 }, // top rating 250C
{ 203 * OVERSAMPLENR, 245 },
{ 217 * OVERSAMPLENR, 240 },
{ 232 * OVERSAMPLENR, 235 },
{ 248 * OVERSAMPLENR, 230 },
{ 265 * OVERSAMPLENR, 225 },
{ 283 * OVERSAMPLENR, 220 },
{ 302 * OVERSAMPLENR, 215 },
{ 322 * OVERSAMPLENR, 210 },
{ 344 * OVERSAMPLENR, 205 },
{ 366 * OVERSAMPLENR, 200 },
{ 390 * OVERSAMPLENR, 195 },
{ 415 * OVERSAMPLENR, 190 },
{ 440 * OVERSAMPLENR, 185 },
{ 467 * OVERSAMPLENR, 180 },
{ 494 * OVERSAMPLENR, 175 },
{ 522 * OVERSAMPLENR, 170 },
{ 551 * OVERSAMPLENR, 165 },
{ 580 * OVERSAMPLENR, 160 },
{ 609 * OVERSAMPLENR, 155 },
{ 638 * OVERSAMPLENR, 150 },
{ 666 * OVERSAMPLENR, 145 },
{ 695 * OVERSAMPLENR, 140 },
{ 722 * OVERSAMPLENR, 135 },
{ 749 * OVERSAMPLENR, 130 },
{ 775 * OVERSAMPLENR, 125 },
{ 800 * OVERSAMPLENR, 120 },
{ 823 * OVERSAMPLENR, 115 },
{ 845 * OVERSAMPLENR, 110 },
{ 865 * OVERSAMPLENR, 105 },
{ 884 * OVERSAMPLENR, 100 },
{ 901 * OVERSAMPLENR, 95 },
{ 917 * OVERSAMPLENR, 90 },
{ 932 * OVERSAMPLENR, 85 },
{ 944 * OVERSAMPLENR, 80 },
{ 956 * OVERSAMPLENR, 75 },
{ 966 * OVERSAMPLENR, 70 },
{ 975 * OVERSAMPLENR, 65 },
{ 982 * OVERSAMPLENR, 60 },
{ 989 * OVERSAMPLENR, 55 },
{ 995 * OVERSAMPLENR, 50 },
{ 1000 * OVERSAMPLENR, 45 },
{ 1004 * OVERSAMPLENR, 40 },
{ 1007 * OVERSAMPLENR, 35 },
{ 1010 * OVERSAMPLENR, 30 },
{ 1013 * OVERSAMPLENR, 25 },
{ 1015 * OVERSAMPLENR, 20 },
{ 1017 * OVERSAMPLENR, 15 },
{ 1018 * OVERSAMPLENR, 10 },
{ 1019 * OVERSAMPLENR, 5 },
{ 1020 * OVERSAMPLENR, 0 },
{ 1021 * OVERSAMPLENR, -5 }
};

View File

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 500 },
{ 125 * OVERSAMPLENR, 300 }, // top rating 300C
{ 142 * OVERSAMPLENR, 290 },
{ 162 * OVERSAMPLENR, 280 },
{ 185 * OVERSAMPLENR, 270 },
{ 211 * OVERSAMPLENR, 260 },
{ 240 * OVERSAMPLENR, 250 },
{ 274 * OVERSAMPLENR, 240 },
{ 312 * OVERSAMPLENR, 230 },
{ 355 * OVERSAMPLENR, 220 },
{ 401 * OVERSAMPLENR, 210 },
{ 452 * OVERSAMPLENR, 200 },
{ 506 * OVERSAMPLENR, 190 },
{ 563 * OVERSAMPLENR, 180 },
{ 620 * OVERSAMPLENR, 170 },
{ 677 * OVERSAMPLENR, 160 },
{ 732 * OVERSAMPLENR, 150 },
{ 783 * OVERSAMPLENR, 140 },
{ 830 * OVERSAMPLENR, 130 },
{ 871 * OVERSAMPLENR, 120 },
{ 906 * OVERSAMPLENR, 110 },
{ 935 * OVERSAMPLENR, 100 },
{ 958 * OVERSAMPLENR, 90 },
{ 976 * OVERSAMPLENR, 80 },
{ 990 * OVERSAMPLENR, 70 },
{ 1000 * OVERSAMPLENR, 60 },
{ 1008 * OVERSAMPLENR, 50 },
{ 1013 * OVERSAMPLENR, 40 },
{ 1017 * OVERSAMPLENR, 30 },
{ 1019 * OVERSAMPLENR, 20 },
{ 1021 * OVERSAMPLENR, 10 },
{ 1022 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_55[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 500 },
{ 76 * OVERSAMPLENR, 300 },
{ 87 * OVERSAMPLENR, 290 },
{ 100 * OVERSAMPLENR, 280 },
{ 114 * OVERSAMPLENR, 270 },
{ 131 * OVERSAMPLENR, 260 },
{ 152 * OVERSAMPLENR, 250 },
{ 175 * OVERSAMPLENR, 240 },
{ 202 * OVERSAMPLENR, 230 },
{ 234 * OVERSAMPLENR, 220 },
{ 271 * OVERSAMPLENR, 210 },
{ 312 * OVERSAMPLENR, 200 },
{ 359 * OVERSAMPLENR, 190 },
{ 411 * OVERSAMPLENR, 180 },
{ 467 * OVERSAMPLENR, 170 },
{ 527 * OVERSAMPLENR, 160 },
{ 590 * OVERSAMPLENR, 150 },
{ 652 * OVERSAMPLENR, 140 },
{ 713 * OVERSAMPLENR, 130 },
{ 770 * OVERSAMPLENR, 120 },
{ 822 * OVERSAMPLENR, 110 },
{ 867 * OVERSAMPLENR, 100 },
{ 905 * OVERSAMPLENR, 90 },
{ 936 * OVERSAMPLENR, 80 },
{ 961 * OVERSAMPLENR, 70 },
{ 979 * OVERSAMPLENR, 60 },
{ 993 * OVERSAMPLENR, 50 },
{ 1003 * OVERSAMPLENR, 40 },
{ 1010 * OVERSAMPLENR, 30 },
{ 1015 * OVERSAMPLENR, 20 },
{ 1018 * OVERSAMPLENR, 10 },
{ 1020 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,63 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k Epcos thermistor
const short temptable_6[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 350 },
{ 28 * OVERSAMPLENR, 250 }, // top rating 250C
{ 31 * OVERSAMPLENR, 245 },
{ 35 * OVERSAMPLENR, 240 },
{ 39 * OVERSAMPLENR, 235 },
{ 42 * OVERSAMPLENR, 230 },
{ 44 * OVERSAMPLENR, 225 },
{ 49 * OVERSAMPLENR, 220 },
{ 53 * OVERSAMPLENR, 215 },
{ 62 * OVERSAMPLENR, 210 },
{ 71 * OVERSAMPLENR, 205 }, // fitted graphically
{ 78 * OVERSAMPLENR, 200 }, // fitted graphically
{ 94 * OVERSAMPLENR, 190 },
{ 102 * OVERSAMPLENR, 185 },
{ 116 * OVERSAMPLENR, 170 },
{ 143 * OVERSAMPLENR, 160 },
{ 183 * OVERSAMPLENR, 150 },
{ 223 * OVERSAMPLENR, 140 },
{ 270 * OVERSAMPLENR, 130 },
{ 318 * OVERSAMPLENR, 120 },
{ 383 * OVERSAMPLENR, 110 },
{ 413 * OVERSAMPLENR, 105 },
{ 439 * OVERSAMPLENR, 100 },
{ 484 * OVERSAMPLENR, 95 },
{ 513 * OVERSAMPLENR, 90 },
{ 607 * OVERSAMPLENR, 80 },
{ 664 * OVERSAMPLENR, 70 },
{ 781 * OVERSAMPLENR, 60 },
{ 810 * OVERSAMPLENR, 55 },
{ 849 * OVERSAMPLENR, 50 },
{ 914 * OVERSAMPLENR, 45 },
{ 914 * OVERSAMPLENR, 40 },
{ 935 * OVERSAMPLENR, 35 },
{ 954 * OVERSAMPLENR, 30 },
{ 970 * OVERSAMPLENR, 25 },
{ 978 * OVERSAMPLENR, 22 },
{ 1008 * OVERSAMPLENR, 3 },
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
};

105
Marlin/thermistortable_60.h Normal file
View File

@ -0,0 +1,105 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Maker's Tool Works Kapton Bed Thermistor
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
// r0: 100000
// t0: 25
// r1: 0 (parallel with rTherm)
// r2: 4700 (series with rTherm)
// beta: 3950
// min adc: 1 at 0.0048828125 V
// max adc: 1023 at 4.9951171875 V
const short temptable_60[][2] PROGMEM = {
{ 51 * OVERSAMPLENR, 272 },
{ 61 * OVERSAMPLENR, 258 },
{ 71 * OVERSAMPLENR, 247 },
{ 81 * OVERSAMPLENR, 237 },
{ 91 * OVERSAMPLENR, 229 },
{ 101 * OVERSAMPLENR, 221 },
{ 131 * OVERSAMPLENR, 204 },
{ 161 * OVERSAMPLENR, 190 },
{ 191 * OVERSAMPLENR, 179 },
{ 231 * OVERSAMPLENR, 167 },
{ 271 * OVERSAMPLENR, 157 },
{ 311 * OVERSAMPLENR, 148 },
{ 351 * OVERSAMPLENR, 140 },
{ 381 * OVERSAMPLENR, 135 },
{ 411 * OVERSAMPLENR, 130 },
{ 441 * OVERSAMPLENR, 125 },
{ 451 * OVERSAMPLENR, 123 },
{ 461 * OVERSAMPLENR, 122 },
{ 471 * OVERSAMPLENR, 120 },
{ 481 * OVERSAMPLENR, 119 },
{ 491 * OVERSAMPLENR, 117 },
{ 501 * OVERSAMPLENR, 116 },
{ 511 * OVERSAMPLENR, 114 },
{ 521 * OVERSAMPLENR, 113 },
{ 531 * OVERSAMPLENR, 111 },
{ 541 * OVERSAMPLENR, 110 },
{ 551 * OVERSAMPLENR, 108 },
{ 561 * OVERSAMPLENR, 107 },
{ 571 * OVERSAMPLENR, 105 },
{ 581 * OVERSAMPLENR, 104 },
{ 591 * OVERSAMPLENR, 102 },
{ 601 * OVERSAMPLENR, 101 },
{ 611 * OVERSAMPLENR, 100 },
{ 621 * OVERSAMPLENR, 98 },
{ 631 * OVERSAMPLENR, 97 },
{ 641 * OVERSAMPLENR, 95 },
{ 651 * OVERSAMPLENR, 94 },
{ 661 * OVERSAMPLENR, 92 },
{ 671 * OVERSAMPLENR, 91 },
{ 681 * OVERSAMPLENR, 90 },
{ 691 * OVERSAMPLENR, 88 },
{ 701 * OVERSAMPLENR, 87 },
{ 711 * OVERSAMPLENR, 85 },
{ 721 * OVERSAMPLENR, 84 },
{ 731 * OVERSAMPLENR, 82 },
{ 741 * OVERSAMPLENR, 81 },
{ 751 * OVERSAMPLENR, 79 },
{ 761 * OVERSAMPLENR, 77 },
{ 771 * OVERSAMPLENR, 76 },
{ 781 * OVERSAMPLENR, 74 },
{ 791 * OVERSAMPLENR, 72 },
{ 801 * OVERSAMPLENR, 71 },
{ 811 * OVERSAMPLENR, 69 },
{ 821 * OVERSAMPLENR, 67 },
{ 831 * OVERSAMPLENR, 65 },
{ 841 * OVERSAMPLENR, 63 },
{ 851 * OVERSAMPLENR, 62 },
{ 861 * OVERSAMPLENR, 60 },
{ 871 * OVERSAMPLENR, 57 },
{ 881 * OVERSAMPLENR, 55 },
{ 891 * OVERSAMPLENR, 53 },
{ 901 * OVERSAMPLENR, 51 },
{ 911 * OVERSAMPLENR, 48 },
{ 921 * OVERSAMPLENR, 45 },
{ 931 * OVERSAMPLENR, 42 },
{ 941 * OVERSAMPLENR, 39 },
{ 951 * OVERSAMPLENR, 36 },
{ 961 * OVERSAMPLENR, 32 },
{ 981 * OVERSAMPLENR, 23 },
{ 991 * OVERSAMPLENR, 17 },
{ 1001 * OVERSAMPLENR, 9 },
{ 1008 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,52 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// DyzeDesign 500°C Thermistor
const short temptable_66[][2] PROGMEM = {
{ 17.5 * OVERSAMPLENR, 850 },
{ 17.9 * OVERSAMPLENR, 500 },
{ 21.7 * OVERSAMPLENR, 480 },
{ 26.6 * OVERSAMPLENR, 460 },
{ 33.1 * OVERSAMPLENR, 440 },
{ 41.0 * OVERSAMPLENR, 420 },
{ 52.3 * OVERSAMPLENR, 400 },
{ 67.7 * OVERSAMPLENR, 380 },
{ 86.5 * OVERSAMPLENR, 360 },
{ 112.0 * OVERSAMPLENR, 340 },
{ 147.2 * OVERSAMPLENR, 320 },
{ 194.0 * OVERSAMPLENR, 300 },
{ 254.3 * OVERSAMPLENR, 280 },
{ 330.2 * OVERSAMPLENR, 260 },
{ 427.9 * OVERSAMPLENR, 240 },
{ 533.4 * OVERSAMPLENR, 220 },
{ 646.5 * OVERSAMPLENR, 200 },
{ 754.4 * OVERSAMPLENR, 180 },
{ 844.3 * OVERSAMPLENR, 160 },
{ 911.7 * OVERSAMPLENR, 140 },
{ 958.6 * OVERSAMPLENR, 120 },
{ 988.8 * OVERSAMPLENR, 100 },
{ 1006.6 * OVERSAMPLENR, 80 },
{ 1015.8 * OVERSAMPLENR, 60 },
{ 1021.3 * OVERSAMPLENR, 30 },
{ 1023 * OVERSAMPLENR - 1, 25},
{ 1023 * OVERSAMPLENR, 20}
};

View File

@ -0,0 +1,83 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 941 },
{ 19 * OVERSAMPLENR, 362 },
{ 37 * OVERSAMPLENR, 299 }, // top rating 300C
{ 55 * OVERSAMPLENR, 266 },
{ 73 * OVERSAMPLENR, 245 },
{ 91 * OVERSAMPLENR, 229 },
{ 109 * OVERSAMPLENR, 216 },
{ 127 * OVERSAMPLENR, 206 },
{ 145 * OVERSAMPLENR, 197 },
{ 163 * OVERSAMPLENR, 190 },
{ 181 * OVERSAMPLENR, 183 },
{ 199 * OVERSAMPLENR, 177 },
{ 217 * OVERSAMPLENR, 171 },
{ 235 * OVERSAMPLENR, 166 },
{ 253 * OVERSAMPLENR, 162 },
{ 271 * OVERSAMPLENR, 157 },
{ 289 * OVERSAMPLENR, 153 },
{ 307 * OVERSAMPLENR, 149 },
{ 325 * OVERSAMPLENR, 146 },
{ 343 * OVERSAMPLENR, 142 },
{ 361 * OVERSAMPLENR, 139 },
{ 379 * OVERSAMPLENR, 135 },
{ 397 * OVERSAMPLENR, 132 },
{ 415 * OVERSAMPLENR, 129 },
{ 433 * OVERSAMPLENR, 126 },
{ 451 * OVERSAMPLENR, 123 },
{ 469 * OVERSAMPLENR, 121 },
{ 487 * OVERSAMPLENR, 118 },
{ 505 * OVERSAMPLENR, 115 },
{ 523 * OVERSAMPLENR, 112 },
{ 541 * OVERSAMPLENR, 110 },
{ 559 * OVERSAMPLENR, 107 },
{ 577 * OVERSAMPLENR, 105 },
{ 595 * OVERSAMPLENR, 102 },
{ 613 * OVERSAMPLENR, 99 },
{ 631 * OVERSAMPLENR, 97 },
{ 649 * OVERSAMPLENR, 94 },
{ 667 * OVERSAMPLENR, 92 },
{ 685 * OVERSAMPLENR, 89 },
{ 703 * OVERSAMPLENR, 86 },
{ 721 * OVERSAMPLENR, 84 },
{ 739 * OVERSAMPLENR, 81 },
{ 757 * OVERSAMPLENR, 78 },
{ 775 * OVERSAMPLENR, 75 },
{ 793 * OVERSAMPLENR, 72 },
{ 811 * OVERSAMPLENR, 69 },
{ 829 * OVERSAMPLENR, 66 },
{ 847 * OVERSAMPLENR, 62 },
{ 865 * OVERSAMPLENR, 59 },
{ 883 * OVERSAMPLENR, 55 },
{ 901 * OVERSAMPLENR, 51 },
{ 919 * OVERSAMPLENR, 46 },
{ 937 * OVERSAMPLENR, 41 },
{ 955 * OVERSAMPLENR, 35 },
{ 973 * OVERSAMPLENR, 27 },
{ 991 * OVERSAMPLENR, 17 },
{ 1009 * OVERSAMPLENR, 1 },
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
};

View File

@ -0,0 +1,86 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// bqh2 stock thermistor
const short temptable_70[][2] PROGMEM = {
{ 22 * OVERSAMPLENR, 300 },
{ 24 * OVERSAMPLENR, 295 },
{ 25 * OVERSAMPLENR, 290 },
{ 27 * OVERSAMPLENR, 285 },
{ 29 * OVERSAMPLENR, 280 },
{ 32 * OVERSAMPLENR, 275 },
{ 34 * OVERSAMPLENR, 270 },
{ 37 * OVERSAMPLENR, 265 },
{ 40 * OVERSAMPLENR, 260 },
{ 43 * OVERSAMPLENR, 255 },
{ 46 * OVERSAMPLENR, 250 },
{ 50 * OVERSAMPLENR, 245 },
{ 54 * OVERSAMPLENR, 240 },
{ 59 * OVERSAMPLENR, 235 },
{ 64 * OVERSAMPLENR, 230 },
{ 70 * OVERSAMPLENR, 225 },
{ 76 * OVERSAMPLENR, 220 },
{ 83 * OVERSAMPLENR, 215 },
{ 90 * OVERSAMPLENR, 210 },
{ 99 * OVERSAMPLENR, 205 },
{ 108 * OVERSAMPLENR, 200 },
{ 118 * OVERSAMPLENR, 195 },
{ 129 * OVERSAMPLENR, 190 },
{ 141 * OVERSAMPLENR, 185 },
{ 154 * OVERSAMPLENR, 180 },
{ 169 * OVERSAMPLENR, 175 },
{ 185 * OVERSAMPLENR, 170 },
{ 203 * OVERSAMPLENR, 165 },
{ 222 * OVERSAMPLENR, 160 },
{ 243 * OVERSAMPLENR, 155 },
{ 266 * OVERSAMPLENR, 150 },
{ 290 * OVERSAMPLENR, 145 },
{ 317 * OVERSAMPLENR, 140 },
{ 346 * OVERSAMPLENR, 135 },
{ 376 * OVERSAMPLENR, 130 },
{ 408 * OVERSAMPLENR, 125 },
{ 442 * OVERSAMPLENR, 120 },
{ 477 * OVERSAMPLENR, 115 },
{ 513 * OVERSAMPLENR, 110 },
{ 551 * OVERSAMPLENR, 105 },
{ 588 * OVERSAMPLENR, 100 },
{ 626 * OVERSAMPLENR, 95 },
{ 663 * OVERSAMPLENR, 90 },
{ 699 * OVERSAMPLENR, 85 },
{ 735 * OVERSAMPLENR, 80 },
{ 768 * OVERSAMPLENR, 75 },
{ 800 * OVERSAMPLENR, 70 },
{ 829 * OVERSAMPLENR, 65 },
{ 856 * OVERSAMPLENR, 60 },
{ 881 * OVERSAMPLENR, 55 },
{ 903 * OVERSAMPLENR, 50 },
{ 922 * OVERSAMPLENR, 45 },
{ 939 * OVERSAMPLENR, 40 },
{ 954 * OVERSAMPLENR, 35 },
{ 966 * OVERSAMPLENR, 30 },
{ 977 * OVERSAMPLENR, 25 },
{ 986 * OVERSAMPLENR, 20 },
{ 994 * OVERSAMPLENR, 15 },
{ 1000 * OVERSAMPLENR, 10 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1009 * OVERSAMPLENR, 0 } // safety
};

171
Marlin/thermistortable_71.h Normal file
View File

@ -0,0 +1,171 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k Honeywell 135-104LAF-J01
// R0 = 100000 Ohm
// T0 = 25 °C
// Beta = 3974
// R1 = 0 Ohm
// R2 = 4700 Ohm
const short temptable_71[][2] PROGMEM = {
{ 35 * OVERSAMPLENR, 300 },
{ 51 * OVERSAMPLENR, 270 },
{ 54 * OVERSAMPLENR, 265 },
{ 58 * OVERSAMPLENR, 260 },
{ 59 * OVERSAMPLENR, 258 },
{ 61 * OVERSAMPLENR, 256 },
{ 63 * OVERSAMPLENR, 254 },
{ 64 * OVERSAMPLENR, 252 },
{ 66 * OVERSAMPLENR, 250 },
{ 67 * OVERSAMPLENR, 249 },
{ 68 * OVERSAMPLENR, 248 },
{ 69 * OVERSAMPLENR, 247 },
{ 70 * OVERSAMPLENR, 246 },
{ 71 * OVERSAMPLENR, 245 },
{ 72 * OVERSAMPLENR, 244 },
{ 73 * OVERSAMPLENR, 243 },
{ 74 * OVERSAMPLENR, 242 },
{ 75 * OVERSAMPLENR, 241 },
{ 76 * OVERSAMPLENR, 240 },
{ 77 * OVERSAMPLENR, 239 },
{ 78 * OVERSAMPLENR, 238 },
{ 79 * OVERSAMPLENR, 237 },
{ 80 * OVERSAMPLENR, 236 },
{ 81 * OVERSAMPLENR, 235 },
{ 82 * OVERSAMPLENR, 234 },
{ 84 * OVERSAMPLENR, 233 },
{ 85 * OVERSAMPLENR, 232 },
{ 86 * OVERSAMPLENR, 231 },
{ 87 * OVERSAMPLENR, 230 },
{ 89 * OVERSAMPLENR, 229 },
{ 90 * OVERSAMPLENR, 228 },
{ 91 * OVERSAMPLENR, 227 },
{ 92 * OVERSAMPLENR, 226 },
{ 94 * OVERSAMPLENR, 225 },
{ 95 * OVERSAMPLENR, 224 },
{ 97 * OVERSAMPLENR, 223 },
{ 98 * OVERSAMPLENR, 222 },
{ 99 * OVERSAMPLENR, 221 },
{ 101 * OVERSAMPLENR, 220 },
{ 102 * OVERSAMPLENR, 219 },
{ 104 * OVERSAMPLENR, 218 },
{ 106 * OVERSAMPLENR, 217 },
{ 107 * OVERSAMPLENR, 216 },
{ 109 * OVERSAMPLENR, 215 },
{ 110 * OVERSAMPLENR, 214 },
{ 112 * OVERSAMPLENR, 213 },
{ 114 * OVERSAMPLENR, 212 },
{ 115 * OVERSAMPLENR, 211 },
{ 117 * OVERSAMPLENR, 210 },
{ 119 * OVERSAMPLENR, 209 },
{ 121 * OVERSAMPLENR, 208 },
{ 123 * OVERSAMPLENR, 207 },
{ 125 * OVERSAMPLENR, 206 },
{ 126 * OVERSAMPLENR, 205 },
{ 128 * OVERSAMPLENR, 204 },
{ 130 * OVERSAMPLENR, 203 },
{ 132 * OVERSAMPLENR, 202 },
{ 134 * OVERSAMPLENR, 201 },
{ 136 * OVERSAMPLENR, 200 },
{ 139 * OVERSAMPLENR, 199 },
{ 141 * OVERSAMPLENR, 198 },
{ 143 * OVERSAMPLENR, 197 },
{ 145 * OVERSAMPLENR, 196 },
{ 147 * OVERSAMPLENR, 195 },
{ 150 * OVERSAMPLENR, 194 },
{ 152 * OVERSAMPLENR, 193 },
{ 154 * OVERSAMPLENR, 192 },
{ 157 * OVERSAMPLENR, 191 },
{ 159 * OVERSAMPLENR, 190 },
{ 162 * OVERSAMPLENR, 189 },
{ 164 * OVERSAMPLENR, 188 },
{ 167 * OVERSAMPLENR, 187 },
{ 170 * OVERSAMPLENR, 186 },
{ 172 * OVERSAMPLENR, 185 },
{ 175 * OVERSAMPLENR, 184 },
{ 178 * OVERSAMPLENR, 183 },
{ 181 * OVERSAMPLENR, 182 },
{ 184 * OVERSAMPLENR, 181 },
{ 187 * OVERSAMPLENR, 180 },
{ 190 * OVERSAMPLENR, 179 },
{ 193 * OVERSAMPLENR, 178 },
{ 196 * OVERSAMPLENR, 177 },
{ 199 * OVERSAMPLENR, 176 },
{ 202 * OVERSAMPLENR, 175 },
{ 205 * OVERSAMPLENR, 174 },
{ 208 * OVERSAMPLENR, 173 },
{ 212 * OVERSAMPLENR, 172 },
{ 215 * OVERSAMPLENR, 171 },
{ 219 * OVERSAMPLENR, 170 },
{ 237 * OVERSAMPLENR, 165 },
{ 256 * OVERSAMPLENR, 160 },
{ 300 * OVERSAMPLENR, 150 },
{ 351 * OVERSAMPLENR, 140 },
{ 470 * OVERSAMPLENR, 120 },
{ 504 * OVERSAMPLENR, 115 },
{ 538 * OVERSAMPLENR, 110 },
{ 552 * OVERSAMPLENR, 108 },
{ 566 * OVERSAMPLENR, 106 },
{ 580 * OVERSAMPLENR, 104 },
{ 594 * OVERSAMPLENR, 102 },
{ 608 * OVERSAMPLENR, 100 },
{ 622 * OVERSAMPLENR, 98 },
{ 636 * OVERSAMPLENR, 96 },
{ 650 * OVERSAMPLENR, 94 },
{ 664 * OVERSAMPLENR, 92 },
{ 678 * OVERSAMPLENR, 90 },
{ 712 * OVERSAMPLENR, 85 },
{ 745 * OVERSAMPLENR, 80 },
{ 758 * OVERSAMPLENR, 78 },
{ 770 * OVERSAMPLENR, 76 },
{ 783 * OVERSAMPLENR, 74 },
{ 795 * OVERSAMPLENR, 72 },
{ 806 * OVERSAMPLENR, 70 },
{ 818 * OVERSAMPLENR, 68 },
{ 829 * OVERSAMPLENR, 66 },
{ 840 * OVERSAMPLENR, 64 },
{ 850 * OVERSAMPLENR, 62 },
{ 860 * OVERSAMPLENR, 60 },
{ 870 * OVERSAMPLENR, 58 },
{ 879 * OVERSAMPLENR, 56 },
{ 888 * OVERSAMPLENR, 54 },
{ 897 * OVERSAMPLENR, 52 },
{ 905 * OVERSAMPLENR, 50 },
{ 924 * OVERSAMPLENR, 45 },
{ 940 * OVERSAMPLENR, 40 },
{ 955 * OVERSAMPLENR, 35 },
{ 967 * OVERSAMPLENR, 30 },
{ 970 * OVERSAMPLENR, 29 },
{ 972 * OVERSAMPLENR, 28 },
{ 974 * OVERSAMPLENR, 27 },
{ 976 * OVERSAMPLENR, 26 },
{ 978 * OVERSAMPLENR, 25 },
{ 980 * OVERSAMPLENR, 24 },
{ 982 * OVERSAMPLENR, 23 },
{ 984 * OVERSAMPLENR, 22 },
{ 985 * OVERSAMPLENR, 21 },
{ 987 * OVERSAMPLENR, 20 },
{ 995 * OVERSAMPLENR, 15 },
{ 1001 * OVERSAMPLENR, 10 },
{ 1006 * OVERSAMPLENR, 5 },
{ 1010 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,45 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
const short temptable_8[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 704 },
{ 54 * OVERSAMPLENR, 216 },
{ 107 * OVERSAMPLENR, 175 },
{ 160 * OVERSAMPLENR, 152 },
{ 213 * OVERSAMPLENR, 137 },
{ 266 * OVERSAMPLENR, 125 },
{ 319 * OVERSAMPLENR, 115 },
{ 372 * OVERSAMPLENR, 106 },
{ 425 * OVERSAMPLENR, 99 },
{ 478 * OVERSAMPLENR, 91 },
{ 531 * OVERSAMPLENR, 85 },
{ 584 * OVERSAMPLENR, 78 },
{ 637 * OVERSAMPLENR, 71 },
{ 690 * OVERSAMPLENR, 65 },
{ 743 * OVERSAMPLENR, 58 },
{ 796 * OVERSAMPLENR, 50 },
{ 849 * OVERSAMPLENR, 42 },
{ 902 * OVERSAMPLENR, 31 },
{ 955 * OVERSAMPLENR, 17 },
{ 1008 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
const short temptable_9[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 936 },
{ 36 * OVERSAMPLENR, 300 },
{ 71 * OVERSAMPLENR, 246 },
{ 106 * OVERSAMPLENR, 218 },
{ 141 * OVERSAMPLENR, 199 },
{ 176 * OVERSAMPLENR, 185 },
{ 211 * OVERSAMPLENR, 173 },
{ 246 * OVERSAMPLENR, 163 },
{ 281 * OVERSAMPLENR, 155 },
{ 316 * OVERSAMPLENR, 147 },
{ 351 * OVERSAMPLENR, 140 },
{ 386 * OVERSAMPLENR, 134 },
{ 421 * OVERSAMPLENR, 128 },
{ 456 * OVERSAMPLENR, 122 },
{ 491 * OVERSAMPLENR, 117 },
{ 526 * OVERSAMPLENR, 112 },
{ 561 * OVERSAMPLENR, 107 },
{ 596 * OVERSAMPLENR, 102 },
{ 631 * OVERSAMPLENR, 97 },
{ 666 * OVERSAMPLENR, 92 },
{ 701 * OVERSAMPLENR, 87 },
{ 736 * OVERSAMPLENR, 81 },
{ 771 * OVERSAMPLENR, 76 },
{ 806 * OVERSAMPLENR, 70 },
{ 841 * OVERSAMPLENR, 63 },
{ 876 * OVERSAMPLENR, 56 },
{ 911 * OVERSAMPLENR, 48 },
{ 946 * OVERSAMPLENR, 38 },
{ 981 * OVERSAMPLENR, 23 },
{ 1005 * OVERSAMPLENR, 5 },
{ 1016 * OVERSAMPLENR, 0 }
};

View File

@ -0,0 +1,32 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// User-defined table 1
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_998_VALUE
#define DUMMY_THERMISTOR_998_VALUE 25
#endif
const short temptable_998[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE },
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE }
};

View File

@ -0,0 +1,32 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// User-defined table 2
// Dummy Thermistor table.. It will ALWAYS read a fixed value.
#ifndef DUMMY_THERMISTOR_999_VALUE
#define DUMMY_THERMISTOR_999_VALUE 25
#endif
const short temptable_999[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE },
{ 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE }
};

File diff suppressed because it is too large Load Diff