From bf59a4a6df98f5d79f68848c5163621ebe24abbb Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Sat, 10 Mar 2018 17:22:20 -0600 Subject: [PATCH] Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" --- Marlin/src/HAL/HAL_DUE/HAL_Due.h | 10 +- Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp | 517 +++++++----------- .../HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp | 163 ------ .../examples/MakerParts/Configuration.h | 4 +- Marlin/src/gcode/queue.cpp | 4 +- Marlin/src/inc/Conditionals_adv.h | 2 +- Marlin/src/inc/SanityCheck.h | 4 +- .../lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp | 189 ------- Marlin/src/pins/pins_DUE3DOM_MINI.h | 11 - Marlin/src/pins/pins_RAMPS_FD_V1.h | 57 +- Marlin/src/pins/pins_RAMPS_FD_V2.h | 8 - 11 files changed, 225 insertions(+), 744 deletions(-) delete mode 100644 Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp delete mode 100644 Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp diff --git a/Marlin/src/HAL/HAL_DUE/HAL_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_Due.h index f3c50927f2..ab12a11e97 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_Due.h +++ b/Marlin/src/HAL/HAL_DUE/HAL_Due.h @@ -41,7 +41,15 @@ // Defines // #define NUM_SERIAL 1 -#define MYSERIAL0 customizedSerial + +//#undef SERIAL_PORT +//#define SERIAL_PORT -1 + +#if SERIAL_PORT == -1 + #define MYSERIAL0 SerialUSB +#else + #define MYSERIAL0 customizedSerial +#endif // We need the previous define before the include, or compilation bombs... #include "MarlinSerial_Due.h" diff --git a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp index 0f1aa47fc2..0f31ac7f58 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp +++ b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp @@ -53,7 +53,6 @@ // -------------------------------------------------------------------------- #if ENABLED(SOFTWARE_SPI) - // -------------------------------------------------------------------------- // software SPI // -------------------------------------------------------------------------- @@ -494,77 +493,44 @@ static pfnSpiTxBlock spiTxBlock = spiTxBlockX; static pfnSpiRxBlock spiRxBlock = spiRxBlockX; - #if MB(ALLIGATOR) // control SDSS pin - void spiBegin() { - SET_OUTPUT(SS_PIN); - WRITE(SS_PIN, HIGH); - SET_OUTPUT(SCK_PIN); - SET_INPUT(MISO_PIN); - SET_OUTPUT(MOSI_PIN); - } + void spiBegin() { + SET_OUTPUT(SS_PIN); + WRITE(SS_PIN, HIGH); + SET_OUTPUT(SCK_PIN); + SET_INPUT(MISO_PIN); + SET_OUTPUT(MOSI_PIN); + } - uint8_t spiRec() { - WRITE(SS_PIN, LOW); - WRITE(MOSI_PIN, 1); /* Output 1s 1*/ - uint8_t b = spiTransferRx(0xFF); - WRITE(SS_PIN, HIGH); - return b; - } + uint8_t spiRec() { + WRITE(SS_PIN, LOW); + WRITE(MOSI_PIN, 1); /* Output 1s 1*/ + uint8_t b = spiTransferRx(0xFF); + WRITE(SS_PIN, HIGH); + return b; + } - void spiRead(uint8_t* buf, uint16_t nbyte) { - uint32_t todo = nbyte; - if (todo == 0) return; + void spiRead(uint8_t* buf, uint16_t nbyte) { + uint32_t todo = nbyte; + if (todo == 0) return; - WRITE(SS_PIN, LOW); - WRITE(MOSI_PIN, 1); /* Output 1s 1*/ - spiRxBlock(buf,nbyte); - WRITE(SS_PIN, HIGH); - } + WRITE(SS_PIN, LOW); + WRITE(MOSI_PIN, 1); /* Output 1s 1*/ + spiRxBlock(buf,nbyte); + WRITE(SS_PIN, HIGH); + } - void spiSend(uint8_t b) { - WRITE(SS_PIN, LOW); - (void) spiTransferTx(b); - WRITE(SS_PIN, HIGH); - } + void spiSend(uint8_t b) { + WRITE(SS_PIN, LOW); + (void) spiTransferTx(b); + WRITE(SS_PIN, HIGH); + } - void spiSendBlock(uint8_t token, const uint8_t* buf) { - WRITE(SS_PIN, LOW); - (void) spiTransferTx(token); - spiTxBlock(buf,512); - WRITE(SS_PIN, HIGH); - - #else // let calling routine control SDSS - void spiBegin() { - SET_OUTPUT(SS_PIN); - SET_OUTPUT(SCK_PIN); - SET_INPUT(MISO_PIN); - SET_OUTPUT(MOSI_PIN); - } + void spiSendBlock(uint8_t token, const uint8_t* buf) { - uint8_t spiRec() { - WRITE(MOSI_PIN, 1); /* Output 1s 1*/ - uint8_t b = spiTransferRx(0xFF); - return b; - } - - void spiRead(uint8_t* buf, uint16_t nbyte) { - uint32_t todo = nbyte; - if (todo == 0) return; - - WRITE(MOSI_PIN, 1); /* Output 1s 1*/ - spiRxBlock(buf,nbyte); - } - - void spiSend(uint8_t b) { - (void) spiTransferTx(b); - } - - void spiSendBlock(uint8_t token, const uint8_t* buf) { - (void) spiTransferTx(token); - spiTxBlock(buf,512); - - #endif - + WRITE(SS_PIN, LOW); + (void) spiTransferTx(token); + spiTxBlock(buf,512); + WRITE(SS_PIN, HIGH); } /** @@ -600,9 +566,7 @@ break; } - #if MB(ALLIGATOR) - WRITE(SS_PIN, HIGH); - #endif + WRITE(SS_PIN, HIGH); WRITE(MOSI_PIN, HIGH); WRITE(SCK_PIN, LOW); } @@ -610,296 +574,211 @@ /** Begin SPI transaction, set clock, bit order, data mode */ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { // TODO: to be implemented + } #pragma GCC reset_options #else + // -------------------------------------------------------------------------- + // hardware SPI + // -------------------------------------------------------------------------- + // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz + int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 }; + bool spiInitMaded = false; - #if MB(ALLIGATOR) - - // slave selects controlled by SPI controller - // doesn't support changing SPI speeds for SD card - - // -------------------------------------------------------------------------- - // hardware SPI - // -------------------------------------------------------------------------- - // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz - int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 }; - bool spiInitMaded = false; + void spiBegin() { + if(spiInitMaded == false) { + // Configure SPI pins + PIO_Configure( + g_APinDescription[SCK_PIN].pPort, + g_APinDescription[SCK_PIN].ulPinType, + g_APinDescription[SCK_PIN].ulPin, + g_APinDescription[SCK_PIN].ulPinConfiguration); + PIO_Configure( + g_APinDescription[MOSI_PIN].pPort, + g_APinDescription[MOSI_PIN].ulPinType, + g_APinDescription[MOSI_PIN].ulPin, + g_APinDescription[MOSI_PIN].ulPinConfiguration); + PIO_Configure( + g_APinDescription[MISO_PIN].pPort, + g_APinDescription[MISO_PIN].ulPinType, + g_APinDescription[MISO_PIN].ulPin, + g_APinDescription[MISO_PIN].ulPinConfiguration); - void spiBegin() { - if(spiInitMaded == false) { - // Configure SPI pins - PIO_Configure( - g_APinDescription[SCK_PIN].pPort, - g_APinDescription[SCK_PIN].ulPinType, - g_APinDescription[SCK_PIN].ulPin, - g_APinDescription[SCK_PIN].ulPinConfiguration); - PIO_Configure( - g_APinDescription[MOSI_PIN].pPort, - g_APinDescription[MOSI_PIN].ulPinType, - g_APinDescription[MOSI_PIN].ulPin, - g_APinDescription[MOSI_PIN].ulPinConfiguration); - PIO_Configure( - g_APinDescription[MISO_PIN].pPort, - g_APinDescription[MISO_PIN].ulPinType, - g_APinDescription[MISO_PIN].ulPin, - g_APinDescription[MISO_PIN].ulPinConfiguration); + // set master mode, peripheral select, fault detection + SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS); + SPI_Enable(SPI0); - // set master mode, peripheral select, fault detection - SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS); - SPI_Enable(SPI0); + #if MB(ALLIGATOR) + SET_OUTPUT(DAC0_SYNC); + #if EXTRUDERS > 1 + SET_OUTPUT(DAC1_SYNC); + WRITE(DAC1_SYNC, HIGH); + #endif + SET_OUTPUT(SPI_EEPROM1_CS); + SET_OUTPUT(SPI_EEPROM2_CS); + SET_OUTPUT(SPI_FLASH_CS); + WRITE(DAC0_SYNC, HIGH); + WRITE(SPI_EEPROM1_CS, HIGH ); + WRITE(SPI_EEPROM2_CS, HIGH ); + WRITE(SPI_FLASH_CS, HIGH ); + WRITE(SS_PIN, HIGH ); + #endif // MB(ALLIGATOR) - #if MB(ALLIGATOR) - SET_OUTPUT(DAC0_SYNC); - #if EXTRUDERS > 1 - SET_OUTPUT(DAC1_SYNC); - WRITE(DAC1_SYNC, HIGH); - #endif - SET_OUTPUT(SPI_EEPROM1_CS); - SET_OUTPUT(SPI_EEPROM2_CS); - SET_OUTPUT(SPI_FLASH_CS); - WRITE(DAC0_SYNC, HIGH); - WRITE(SPI_EEPROM1_CS, HIGH ); - WRITE(SPI_EEPROM2_CS, HIGH ); - WRITE(SPI_FLASH_CS, HIGH ); - WRITE(SS_PIN, HIGH ); - #endif // MB(ALLIGATOR) - - OUT_WRITE(SDSS,0); - - PIO_Configure( - g_APinDescription[SPI_PIN].pPort, - g_APinDescription[SPI_PIN].ulPinType, - g_APinDescription[SPI_PIN].ulPin, - g_APinDescription[SPI_PIN].ulPinConfiguration); - - spiInit(1); - spiInitMaded = true; - } + PIO_Configure( + g_APinDescription[SPI_PIN].pPort, + g_APinDescription[SPI_PIN].ulPinType, + g_APinDescription[SPI_PIN].ulPin, + g_APinDescription[SPI_PIN].ulPinConfiguration); + spiInit(1); + spiInitMaded = true; } + } - void spiInit(uint8_t spiRate) { - if(spiInitMaded == false) { - if(spiRate > 6) spiRate = 1; + void spiInit(uint8_t spiRate) { + if(spiInitMaded == false) { + if(spiRate > 6) spiRate = 1; - #if MB(ALLIGATOR) - // Set SPI mode 1, clock, select not active after transfer, with delay between transfers - SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC, - SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) | - SPI_CSR_DLYBCT(1)); - // Set SPI mode 0, clock, select not active after transfer, with delay between transfers - SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA | - SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) | - SPI_CSR_DLYBCT(1)); - #endif//MB(ALLIGATOR) - - // Set SPI mode 0, clock, select not active after transfer, with delay between transfers - SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA | + #if MB(ALLIGATOR) + // Set SPI mode 1, clock, select not active after transfer, with delay between transfers + SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC, SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) | SPI_CSR_DLYBCT(1)); - SPI_Enable(SPI0); - spiInitMaded = true; - } - } + // Set SPI mode 0, clock, select not active after transfer, with delay between transfers + SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA | + SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) | + SPI_CSR_DLYBCT(1)); + #endif//MB(ALLIGATOR) - // Write single byte to SPI - void spiSend(byte b) { - // write byte with address and end transmission flag - SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; - // wait for transmit register empty + // Set SPI mode 0, clock, select not active after transfer, with delay between transfers + SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA | + SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) | + SPI_CSR_DLYBCT(1)); + SPI_Enable(SPI0); + spiInitMaded = true; + } + } + + // Write single byte to SPI + void spiSend(byte b) { + // write byte with address and end transmission flag + SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; + // wait for transmit register empty + while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + // wait for receive register + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); + // clear status + SPI0->SPI_RDR; + //delayMicroseconds(1U); + } + + void spiSend(const uint8_t* buf, size_t n) { + if (n == 0) return; + for (size_t i = 0; i < n - 1; i++) { + SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - // wait for receive register while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - // clear status SPI0->SPI_RDR; //delayMicroseconds(1U); } + spiSend(buf[n - 1]); + } - void spiSend(const uint8_t* buf, size_t n) { - if (n == 0) return; - for (size_t i = 0; i < n - 1; i++) { - SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - SPI0->SPI_RDR; - //delayMicroseconds(1U); - } - spiSend(buf[n - 1]); - } + void spiSend(uint32_t chan, byte b) { + uint8_t dummy_read = 0; + // wait for transmit register empty + while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + // write byte with address and end transmission flag + SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER; + // wait for receive register + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); + // clear status + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1) + dummy_read = SPI0->SPI_RDR; + UNUSED(dummy_read); + } - void spiSend(uint32_t chan, byte b) { - uint8_t dummy_read = 0; - // wait for transmit register empty + void spiSend(uint32_t chan, const uint8_t* buf, size_t n) { + uint8_t dummy_read = 0; + if (n == 0) return; + for (int i = 0; i < (int)n - 1; i++) { while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - // write byte with address and end transmission flag - SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER; - // wait for receive register + SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan); while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - // clear status while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1) dummy_read = SPI0->SPI_RDR; UNUSED(dummy_read); } + spiSend(chan, buf[n - 1]); + } - void spiSend(uint32_t chan, const uint8_t* buf, size_t n) { - uint8_t dummy_read = 0; - if (n == 0) return; - for (int i = 0; i < (int)n - 1; i++) { - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1) - dummy_read = SPI0->SPI_RDR; - UNUSED(dummy_read); - } - spiSend(chan, buf[n - 1]); - } + // Read single byte from SPI + uint8_t spiRec() { + // write dummy byte with address and end transmission flag + SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; + // wait for transmit register empty + while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - // Read single byte from SPI - uint8_t spiRec() { - // write dummy byte with address and end transmission flag - SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; - // wait for transmit register empty - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + // wait for receive register + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); + // get byte from receive register + //delayMicroseconds(1U); + return SPI0->SPI_RDR; + } - // wait for receive register + uint8_t spiRec(uint32_t chan) { + uint8_t spirec_tmp; + // wait for transmit register empty + while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1) + spirec_tmp = SPI0->SPI_RDR; + UNUSED(spirec_tmp); + + // write dummy byte with address and end transmission flag + SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER; + + // wait for receive register + while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); + // get byte from receive register + return SPI0->SPI_RDR; + } + + // Read from SPI into buffer + void spiRead(uint8_t*buf, uint16_t nbyte) { + if (nbyte-- == 0) return; + + for (int i = 0; i < nbyte; i++) { + //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN); while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - // get byte from receive register + buf[i] = SPI0->SPI_RDR; //delayMicroseconds(1U); - return SPI0->SPI_RDR; } + buf[nbyte] = spiRec(); + } - uint8_t spiRec(uint32_t chan) { - uint8_t spirec_tmp; - // wait for transmit register empty + // Write from buffer to SPI + void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN); + while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); + //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); + //SPI0->SPI_RDR; + for (int i = 0; i < 511; i++) { + SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1) - spirec_tmp = SPI0->SPI_RDR; - UNUSED(spirec_tmp); - - // write dummy byte with address and end transmission flag - SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER; - - // wait for receive register while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - // get byte from receive register - return SPI0->SPI_RDR; + SPI0->SPI_RDR; + //delayMicroseconds(1U); } + spiSend(buf[511]); + } - // Read from SPI into buffer - void spiRead(uint8_t*buf, uint16_t nbyte) { - if (nbyte-- == 0) return; + /** Begin SPI transaction, set clock, bit order, data mode */ + void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { + // TODO: to be implemented + } - for (int i = 0; i < nbyte; i++) { - //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - buf[i] = SPI0->SPI_RDR; - //delayMicroseconds(1U); - } - buf[nbyte] = spiRec(); - } - - // Write from buffer to SPI - void spiSendBlock(uint8_t token, const uint8_t* buf) { - SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN); - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - //SPI0->SPI_RDR; - for (int i = 0; i < 511; i++) { - SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - SPI0->SPI_RDR; - //delayMicroseconds(1U); - } - spiSend(buf[511]); - } - - /** Begin SPI transaction, set clock, bit order, data mode */ - void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { - // TODO: to be implemented - } - - #else // U8G compatible hardware SPI - - void spiInit(uint8_t spiRate = 6 ) { // default to slowest rate if not specified) - // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz - int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 }; - if(spiRate > 6) spiRate = 1; - - /* enable PIOA and SPI0 */ - REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0); - - /* disable PIO on A26 and A27 */ - REG_PIOA_PDR = 0x0c000000; - OUT_WRITE(SDSS, 1); - - /* reset SPI0 (from sam lib) */ - SPI0->SPI_CR = SPI_CR_SPIDIS; - SPI0->SPI_CR = SPI_CR_SWRST; - SPI0->SPI_CR = SPI_CR_SWRST; - SPI0->SPI_CR = SPI_CR_SPIEN; - - - /* master mode, no fault detection, chip select 0 */ - SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS; - - /* SPI mode 0, 8 Bit data transfer, baud rate */ - SPI0->SPI_CSR[0] = SPI_CSR_SCBR(spiDueDividors[spiRate]) | 1; - } - - static uint8_t spiTransfer(uint8_t data) { - - /* wait until tx register is empty */ - while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 ); - /* send data */ - SPI0->SPI_TDR = (uint32_t)data; // | SPI_PCS(0xF); - - // wait for transmit register empty - while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0); - - // wait for receive register - while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0); - // get byte from receive register - return SPI0->SPI_RDR; - } - - void spiBegin() { - spiInit(); - } - - uint8_t spiRec() { - uint8_t data = spiTransfer(0xff); - return data; - } - - void spiRead(uint8_t*buf, uint16_t nbyte) { - if (nbyte == 0) return; - for (int i = 0; i < nbyte; i++) { - buf[i] = spiTransfer(0xff); - } - } - - void spiSend(uint8_t data) { - spiTransfer(data); - } - - void spiSend(const uint8_t* buf, size_t n) { - if (n == 0) return; - for (uint16_t i = 0; i < n; i++) - spiTransfer(buf[i]); - } - - void spiSendBlock(uint8_t token, const uint8_t* buf) { - spiTransfer(token); - for (uint16_t i = 0; i < 512; i++) - spiTransfer(buf[i]); - } - - #endif //MB(ALLIGATOR) #endif // ENABLED(SOFTWARE_SPI) #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp deleted file mode 100644 index 98c065fba3..0000000000 --- a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp +++ /dev/null @@ -1,163 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - - -/* - - based on u8g_com_msp430_hw_spi.c - - Universal 8bit Graphics Library - - Copyright (c) 2012, olikraus@gmail.com - All rights reserved. - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, this list - of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or other - materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*/ - - -#ifdef __SAM3X8E__ - -// #include - -// #include "src/core/macros.h" -// #include "Configuration.h" -#include "../../Marlin.h" -#include "../../inc/MarlinConfig.h" - - #include - - #define SPI_FULL_SPEED 0 - #define SPI_HALF_SPEED 1 - #define SPI_QUARTER_SPEED 2 - #define SPI_EIGHTH_SPEED 3 - #define SPI_SIXTEENTH_SPEED 4 - #define SPI_SPEED_5 5 - #define SPI_SPEED_6 6 - - void spiBegin(); - void spiInit(uint8_t spiRate); - void spiSend(uint8_t b); - void spiSend(const uint8_t* buf, size_t n); - - #include - #include "../../core/macros.h" - #include "fastio_Due.h" - - - void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) { - PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1, - g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT - } - - void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) { - volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort; - uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin; - if (level) port->PIO_SODR = mask; - else port->PIO_CODR = mask; - } - - uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) - { - switch(msg) - { - case U8G_COM_MSG_STOP: - break; - - case U8G_COM_MSG_INIT: - u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1); - u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1); - - u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS); - u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0); - - u8g_Delay(5); - - spiBegin(); - - #ifndef SPI_SPEED - #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card - #endif - spiInit(2); - - break; - - case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ - u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val); - break; - - case U8G_COM_MSG_CHIP_SELECT: - u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1)); - break; - - case U8G_COM_MSG_RESET: - break; - - case U8G_COM_MSG_WRITE_BYTE: - - spiSend((uint8_t)arg_val); - break; - - case U8G_COM_MSG_WRITE_SEQ: { - uint8_t *ptr = (uint8_t*) arg_ptr; - while (arg_val > 0) { - spiSend(*ptr++); - arg_val--; - } - } - break; - - case U8G_COM_MSG_WRITE_SEQ_P: { - uint8_t *ptr = (uint8_t*) arg_ptr; - while (arg_val > 0) { - spiSend(*ptr++); - arg_val--; - } - } - break; - } - return 1; - } - -#endif //__SAM3X8E__ diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index d82f8c493b..2530bfb0a4 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -125,7 +125,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT -1 +#define SERIAL_PORT 0 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +134,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT_2 0 +#define SERIAL_PORT_2 -1 /** * This setting determines the communication speed of the printer. diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 94b27abce2..67471cb80e 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -517,7 +517,7 @@ void advance_command_queue() { card.closefile(); SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED); - #if !defined(__AVR__) || !defined(USBCON) + #ifndef USBCON #if ENABLED(SERIAL_STATS_DROPPED_RX) SERIAL_ECHOLNPAIR("Dropped bytes: ", customizedSerial.dropped()); #endif @@ -525,7 +525,7 @@ void advance_command_queue() { #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) SERIAL_ECHOLNPAIR("Max RX Queue Size: ", customizedSerial.rxMaxEnqueued()); #endif - #endif // !defined(__AVR__) || !defined(USBCON) + #endif // !USBCON ok_to_send(); } diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 289f174373..bfefb8991c 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -28,7 +28,7 @@ #ifndef CONDITIONALS_ADV_H #define CONDITIONALS_ADV_H - #if !defined(__AVR__) || !defined(USBCON) + #ifndef USBCON // Define constants and variables for buffering serial data. // Use only 0 or powers of 2 greater than 1 // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index fe7ca7553c..93fee1b4d7 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -275,7 +275,7 @@ /** * Serial */ -#if !defined(__AVR__) || !defined(USBCON) +#ifndef USBCON #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024 #error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops." #elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE)) @@ -1308,7 +1308,7 @@ static_assert(1 >= 0 /** * emergency-command parser */ -#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON) +#if ENABLED(EMERGENCY_PARSER) && defined(USBCON) #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)." #endif diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp deleted file mode 100644 index f7ff3aca0b..0000000000 --- a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp +++ /dev/null @@ -1,189 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - - -/* - - based on u8g_dev_uc1701_mini12864_HAL.c (dealextreme) - - Universal 8bit Graphics Library - - Copyright (c) 2011, olikraus@gmail.com - All rights reserved. - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, this list - of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or other - materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -*/ - -#include "../../inc/MarlinConfig.h" - -#if ENABLED(DOGLCD) - -#include - -#include "HAL_LCD_com_defines.h" - -#define WIDTH 128 -#define HEIGHT 64 -#define PAGE_HEIGHT 8 - -static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = { - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ - U8G_ESC_CS(1), /* enable chip */ - - 0x0e2, /* soft reset */ - 0x040, /* set display start line to 0 */ - 0x0a0, /* ADC set to reverse */ - 0x0c8, /* common output mode */ - 0x0a6, /* display normal, bit val 0: LCD pixel off. */ - 0x0a2, /* LCD bias 1/9 */ - 0x02f, /* all power control circuits on */ - 0x0f8, /* set booster ratio to */ - 0x000, /* 4x */ - 0x023, /* set V0 voltage resistor ratio to large */ - 0x081, /* set contrast */ - 0x027, /* contrast value */ - 0x0ac, /* indicator */ - 0x000, /* disable */ - 0x0af, /* display on */ - - U8G_ESC_DLY(100), /* delay 100 ms */ - 0x0a5, /* display all points, ST7565 */ - U8G_ESC_DLY(100), /* delay 100 ms */ - U8G_ESC_DLY(100), /* delay 100 ms */ - 0x0a4, /* normal display */ - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - -static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = { - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_CS(1), /* enable chip */ - 0x010, /* set upper 4 bit of the col adr to 0 */ - 0x000, /* set lower 4 bit of the col adr to 4 */ - U8G_ESC_END /* end of sequence */ -}; - -uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) -{ - switch(msg) - { - case U8G_DEV_MSG_INIT: - u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq); - break; - case U8G_DEV_MSG_STOP: - break; - case U8G_DEV_MSG_PAGE_NEXT: - { - u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) - return 0; - u8g_SetChipSelect(u8g, dev, 0); - } - break; - case U8G_DEV_MSG_CONTRAST: - u8g_SetChipSelect(u8g, dev, 1); - u8g_SetAddress(u8g, dev, 0); /* instruction mode */ - u8g_WriteByte(u8g, dev, 0x081); - u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); - u8g_SetChipSelect(u8g, dev, 0); - return 1; - } - return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); -} - -uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) -{ - switch(msg) - { - case U8G_DEV_MSG_INIT: - u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq); - break; - case U8G_DEV_MSG_STOP: - break; - case U8G_DEV_MSG_PAGE_NEXT: - { - u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); - - u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)pb->buf); - u8g_SetChipSelect(u8g, dev, 0); - - u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); - u8g_SetChipSelect(u8g, dev, 0); - } - break; - case U8G_DEV_MSG_CONTRAST: - u8g_SetChipSelect(u8g, dev, 1); - u8g_SetAddress(u8g, dev, 0); /* instruction mode */ - u8g_WriteByte(u8g, dev, 0x081); - u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); - u8g_SetChipSelect(u8g, dev, 0); - return 1; - } - return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); -} - -U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_SW_SPI_FN); -U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_HW_SPI_FN); - -uint8_t u8g_dev_uc1701_mini12864_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ; -u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_mini12864_HAL_2x_buf}; -u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN }; -u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN }; - -#endif // DOGLCD \ No newline at end of file diff --git a/Marlin/src/pins/pins_DUE3DOM_MINI.h b/Marlin/src/pins/pins_DUE3DOM_MINI.h index 9695e3ae42..7ea23835a1 100644 --- a/Marlin/src/pins/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/pins_DUE3DOM_MINI.h @@ -156,16 +156,5 @@ #define BTN_ENC 37 #define BEEPER_PIN -1 - - #elif ENABLED(MINIPANEL) - #define BTN_EN1 52 - #define BTN_EN2 50 - #define BTN_ENC 48 - #define LCD_SDSS 4 - #define SD_DETECT_PIN 14 - #define BEEPER_PIN 41 - #define DOGLCD_A0 46 - #define DOGLCD_CS 45 - #endif // SPARK_FULL_GRAPHICS #endif // ULTRA_LCD diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h index 98003889ad..0a632cfb31 100644 --- a/Marlin/src/pins/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h @@ -140,58 +140,23 @@ // LCD / Controller // #if ENABLED(ULTRA_LCD) - // ramps-fd lcd adaptor - - #if ENABLED(DOGLCD) - #define BEEPER_PIN 37 - #define BTN_EN1 33 - #define BTN_EN2 31 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #endif - #if ENABLED(NEWPANEL) + // ramps-fd lcd adaptor #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 #define LCD_PINS_D4 23 #define LCD_PINS_D5 25 #define LCD_PINS_D6 27 #define LCD_PINS_D7 29 + + #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #define BEEPER_PIN 37 + + #define BTN_EN1 33 + #define BTN_EN2 31 + #define BTN_ENC 35 + + #define SD_DETECT_PIN 49 + #endif #endif - - #if ENABLED(MINIPANEL) - #define DOGLCD_CS 25 - #define DOGLCD_A0 27 - #endif #endif // ULTRA_LCD - -#if ENABLED(HAVE_TMC2208) - /** - * TMC2208 stepper drivers - * - * Hardware serial communication ports. - * If undefined software serial is used according to the pins below - */ - //#define X_HARDWARE_SERIAL Serial1 - //#define X2_HARDWARE_SERIAL Serial1 - //#define Y_HARDWARE_SERIAL Serial1 - //#define Y2_HARDWARE_SERIAL Serial1 - //#define Z_HARDWARE_SERIAL Serial1 - //#define Z2_HARDWARE_SERIAL Serial1 - //#define E0_HARDWARE_SERIAL Serial1 - //#define E1_HARDWARE_SERIAL Serial1 - //#define E2_HARDWARE_SERIAL Serial1 - //#define E3_HARDWARE_SERIAL Serial1 - //#define E4_HARDWARE_SERIAL Serial1 -#endif - -// -// M3/M4/M5 - Spindle/Laser Control -// -#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) - #if HOTENDS < 3 - #define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA - #define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM - #define SPINDLE_DIR_PIN 47 // Use E2 DIR - #endif -#endif diff --git a/Marlin/src/pins/pins_RAMPS_FD_V2.h b/Marlin/src/pins/pins_RAMPS_FD_V2.h index f33546e637..2d2375f060 100644 --- a/Marlin/src/pins/pins_RAMPS_FD_V2.h +++ b/Marlin/src/pins/pins_RAMPS_FD_V2.h @@ -36,11 +36,3 @@ #undef INVERTED_FAN_PINS #define I2C_EEPROM - -#ifndef PS_ON_PIN - #define PS_ON_PIN 12 -#endif - -#ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 5 // Analog Input on AUX2 -#endif