From 6811e2921bcd272e7487e4f379b42a5a403a07c2 Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue, 7 May 2019 22:25:54 -0400 Subject: [PATCH] BLTouch v3 / 3DTouch Interoperability & performance (#13814) --- Marlin/Configuration.h | 8 +- Marlin/src/feature/bltouch.cpp | 134 +++++++++++++----- Marlin/src/feature/bltouch.h | 78 +++++++--- Marlin/src/gcode/calibrate/G34_M422.cpp | 3 +- Marlin/src/inc/Conditionals_LCD.h | 3 - Marlin/src/inc/Conditionals_post.h | 3 + Marlin/src/inc/SanityCheck.h | 12 ++ Marlin/src/lcd/language/language_en.h | 2 +- Marlin/src/lcd/menu/menu_configuration.cpp | 12 +- Marlin/src/module/endstops.cpp | 11 ++ Marlin/src/module/probe.cpp | 2 +- buildroot/share/tests/DUE-tests | 2 +- buildroot/share/tests/megaatmega2560-tests | 2 +- config/default/Configuration.h | 8 +- .../examples/3DFabXYZ/Migbot/Configuration.h | 8 +- .../AlephObjects/TAZ4/Configuration.h | 8 +- .../AliExpress/CL-260/Configuration.h | 8 +- .../AliExpress/UM2pExt/Configuration.h | 8 +- config/examples/Anet/A2/Configuration.h | 8 +- config/examples/Anet/A2plus/Configuration.h | 8 +- config/examples/Anet/A6/Configuration.h | 8 +- config/examples/Anet/A8/Configuration.h | 8 +- config/examples/AnyCubic/i3/Configuration.h | 8 +- config/examples/ArmEd/Configuration.h | 8 +- config/examples/Azteeg/X5GT/Configuration.h | 8 +- .../BIBO/TouchX/cyclops/Configuration.h | 8 +- .../BIBO/TouchX/default/Configuration.h | 8 +- config/examples/BQ/Hephestos/Configuration.h | 8 +- .../examples/BQ/Hephestos_2/Configuration.h | 8 +- config/examples/BQ/WITBOX/Configuration.h | 8 +- config/examples/Cartesio/Configuration.h | 8 +- .../examples/Creality/CR-10/Configuration.h | 8 +- .../examples/Creality/CR-10S/Configuration.h | 8 +- .../Creality/CR-10_5S/Configuration.h | 8 +- .../Creality/CR-10mini/Configuration.h | 8 +- config/examples/Creality/CR-8/Configuration.h | 8 +- .../examples/Creality/Ender-2/Configuration.h | 8 +- .../examples/Creality/Ender-3/Configuration.h | 8 +- .../examples/Creality/Ender-4/Configuration.h | 8 +- config/examples/Einstart-S/Configuration.h | 8 +- config/examples/Felix/Configuration.h | 8 +- config/examples/Felix/DUAL/Configuration.h | 8 +- .../FlashForge/CreatorPro/Configuration.h | 8 +- .../FolgerTech/i3-2020/Configuration.h | 8 +- .../examples/Formbot/Raptor/Configuration.h | 8 +- .../examples/Formbot/T_Rex_2+/Configuration.h | 8 +- .../examples/Formbot/T_Rex_3/Configuration.h | 8 +- config/examples/Geeetech/A10M/Configuration.h | 8 +- config/examples/Geeetech/A20M/Configuration.h | 8 +- .../examples/Geeetech/GT2560/Configuration.h | 8 +- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 2 +- .../Geeetech/MeCreator2/Configuration.h | 8 +- .../Prusa i3 Pro B/bltouch/Configuration.h | 8 +- .../Prusa i3 Pro B/noprobe/Configuration.h | 8 +- .../Geeetech/Prusa i3 Pro C/Configuration.h | 8 +- .../Geeetech/Prusa i3 Pro W/Configuration.h | 8 +- .../examples/Infitary/i3-M508/Configuration.h | 8 +- config/examples/JGAurora/A5/Configuration.h | 8 +- config/examples/MakerParts/Configuration.h | 8 +- config/examples/Malyan/M150/Configuration.h | 8 +- config/examples/Malyan/M200/Configuration.h | 8 +- .../Micromake/C1/basic/Configuration.h | 8 +- .../Micromake/C1/enhanced/Configuration.h | 8 +- config/examples/Mks/Robin/Configuration.h | 8 +- config/examples/Mks/Sbase/Configuration.h | 8 +- .../Printrbot/PrintrboardG2/Configuration.h | 8 +- .../examples/RapideLite/RL200/Configuration.h | 8 +- .../examples/RepRapPro/Huxley/Configuration.h | 8 +- .../RepRapWorld/Megatronics/Configuration.h | 8 +- config/examples/RigidBot/Configuration.h | 8 +- config/examples/SCARA/Configuration.h | 8 +- .../STM32/Black_STM32F407VET6/Configuration.h | 8 +- .../examples/STM32/STM32F10/Configuration.h | 8 +- config/examples/STM32/STM32F4/Configuration.h | 8 +- .../STM32/stm32f103ret6/Configuration.h | 8 +- config/examples/Sanguinololu/Configuration.h | 8 +- config/examples/TheBorg/Configuration.h | 8 +- config/examples/TinyBoy2/Configuration.h | 8 +- config/examples/Tronxy/X1/Configuration.h | 8 +- config/examples/Tronxy/X3A/Configuration.h | 8 +- config/examples/Tronxy/X5S-2E/Configuration.h | 8 +- config/examples/Tronxy/X5S/Configuration.h | 8 +- config/examples/Tronxy/XY100/Configuration.h | 8 +- .../UltiMachine/Archim1/Configuration.h | 8 +- .../UltiMachine/Archim2/Configuration.h | 8 +- config/examples/VORONDesign/Configuration.h | 8 +- .../examples/Velleman/K8200/Configuration.h | 8 +- .../examples/Velleman/K8400/Configuration.h | 8 +- .../Velleman/K8400/Dual-head/Configuration.h | 8 +- .../examples/WASP/PowerWASP/Configuration.h | 8 +- .../Wanhao/Duplicator 6/Configuration.h | 8 +- .../examples/adafruit/ST7565/Configuration.h | 8 +- .../delta/Anycubic/Kossel/Configuration.h | 8 +- .../FLSUN/auto_calibrate/Configuration.h | 8 +- .../delta/FLSUN/kossel/Configuration.h | 8 +- .../delta/FLSUN/kossel_mini/Configuration.h | 8 +- .../Geeetech/Rostock 301/Configuration.h | 8 +- .../delta/Hatchbox_Alpha/Configuration.h | 8 +- .../examples/delta/MKS/SBASE/Configuration.h | 8 +- .../delta/Tevo Little Monster/Configuration.h | 2 +- config/examples/delta/generic/Configuration.h | 8 +- .../delta/kossel_mini/Configuration.h | 8 +- .../examples/delta/kossel_pro/Configuration.h | 8 +- .../examples/delta/kossel_xl/Configuration.h | 8 +- config/examples/makibox/Configuration.h | 8 +- config/examples/tvrrug/Round2/Configuration.h | 8 +- config/examples/wt150/Configuration.h | 8 +- 107 files changed, 383 insertions(+), 629 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 488445321e..0575d981f0 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/Marlin/src/feature/bltouch.cpp b/Marlin/src/feature/bltouch.cpp index 2e68835f39..114fb63121 100644 --- a/Marlin/src/feature/bltouch.cpp +++ b/Marlin/src/feature/bltouch.cpp @@ -35,15 +35,32 @@ void stop(); #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #include "../core/debug_out.h" -void BLTouch::command(const BLTCommand cmd) { - //SERIAL_ECHOLNPAIR("BLTouch Command :", cmd); +bool BLTouch::command(const BLTCommand cmd, const millis_t &ms) { + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("BLTouch Command :", cmd); MOVE_SERVO(Z_PROBE_SERVO_NR, cmd); - safe_delay(BLTOUCH_DELAY); + safe_delay(MAX(ms, BLTOUCH_DELAY)); // BLTOUCH_DELAY is also the *minimum* delay + return triggered(); } void BLTouch::init() { - reset(); // Clear all BLTouch error conditions - stow(); + // This is called by marlin.cpp on initialization + // SET_5V_MODE (if enabled). OD_MODE is the default on power on. + // This mode will stay active until manual SET_OD_MODE or power cycle + #if ENABLED(BLTOUCH_FORCE_5V_MODE) + _set_5V_mode(); // Set 5V mode if explicitely demanded (V3 upwards) + #endif + clear(); + // There really should be no alarm outstanding now, and no triggered condition. But if there is, + // there is no need to worry people here on init right at the start of the printer. +} + +void BLTouch::clear() { + _reset(); // RESET or RESET_SW will clear an alarm condition but... + // ...it will not clear a triggered condition in SW mode when the pin is currently up + // ANTClabs <-- CODE ERROR + _stow(); // STOW will pull up the pin and clear any triggered condition unless it fails, don't care + _deploy(); // DEPLOY to test the probe. Could fail, don't care + _stow(); // STOW to be ready for meaningful work. Could fail, don't care } bool BLTouch::triggered() { @@ -56,41 +73,92 @@ bool BLTouch::triggered() { ); } -bool BLTouch::set_deployed(const bool in_deploy) { - if (in_deploy && triggered()) { // If BLTouch says it's triggered - reset(); // try to reset it. - _deploy(); _stow(); // Deploy and stow to clear the "triggered" condition. - safe_delay(1500); // Wait for internal self-test to complete. - // (Measured completion time was 0.65 seconds - // after reset, deploy, and stow sequence) - if (triggered()) { // If it still claims to be triggered... - SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); - stop(); // punt! - return true; +bool BLTouch::deploy_proc() { + // Do a DEPLOY + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch DEPLOY requested"); + + // Attempt to DEPLOY, wait for DEPLOY_DELAY or ALARM + if (_deploy_query_alarm()) { + // The deploy might have failed or the probe is already triggered (nozzle too low?) + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after DEPLOY, recovering"); + + clear(); // Get the probe into start condition + + // Last attempt to DEPLOY + if (_deploy_query_alarm()) { + // The deploy might have failed or the probe is actually triggered (nozzle too low?) again + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed"); + + SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action + stop(); // but it's not too bad, no need to kill, allow restart + + return true; // Tell our caller we goofed in case he cares to know } } - #if ENABLED(BLTOUCH_V3) - #if EITHER(BLTOUCH_FORCE_5V_MODE, ENDSTOPPULLUPS) \ - || ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) \ - || (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)) - set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled - #elif true || ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE) - set_OD_mode(); - #endif - #endif + // Now the probe is ready to issue a 10ms pulse when the pin goes up. + // The trigger STOW (see motion.cpp for example) will pull up the probes pin as soon as the pulse + // is registered. - if (in_deploy) { - _deploy(); - #if ENABLED(BLTOUCH_V3) - set_SW_mode(); - #endif + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.deploy_proc() end"); + + return false; // report success to caller +} + +bool BLTouch::stow_proc() { + // Do a STOW + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STOW requested"); + + // A STOW will clear a triggered condition in the probe (10ms pulse). + // At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin. + // So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW. + // Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin + // and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe + + // Attempt to STOW, wait for STOW_DELAY or ALARM + if (_stow_query_alarm()) { + // The stow might have failed + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after STOW, recovering"); + + _reset(); // This RESET will then also pull up the pin. If it doesn't + // work and the pin is still down, there will no longer be + // an ALARM condition though. + // But one more STOW will catch that + // Last attempt to STOW + if (_stow_query_alarm()) { // so if there is now STILL an ALARM condition: + + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed"); + + SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH); // Tell the user something is wrong, needs action + stop(); // but it's not too bad, no need to kill, allow restart + + return true; // Tell our caller we goofed in case he cares to know + } } - else _stow(); - if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("bltouch.set_deployed(", in_deploy, ")"); + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.stow_proc() end"); - return false; + return false; // report success to caller +} + +bool BLTouch::status_proc() { + /** + * Return a TRUE for "YES, it is DEPLOYED" + * This function will ensure switch state is reset after execution + * This may change pin position in some scenarios, specifically + * if the pin has been triggered but not yet stowed. + */ + + if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STATUS requested"); + + _set_SW_mode(); + const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED + + if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("BLTouch is ", (int)tr); + + _reset(); // turn off the SW Mode + if (tr) _stow(); else _deploy(); // and reset any triggered signal, restore state + return !tr; } #endif // BLTOUCH diff --git a/Marlin/src/feature/bltouch.h b/Marlin/src/feature/bltouch.h index 553caa60ad..70fb22f717 100644 --- a/Marlin/src/feature/bltouch.h +++ b/Marlin/src/feature/bltouch.h @@ -26,37 +26,75 @@ // BLTouch commands are sent as servo angles typedef unsigned char BLTCommand; -#define BLTOUCH_DEPLOY 10 -#define BLTOUCH_SW_MODE 60 -#define BLTOUCH_STOW 90 -#define BLTOUCH_SELFTEST 120 -#define BLTOUCH_5V_MODE 140 -#define BLTOUCH_OD_MODE 150 -#define BLTOUCH_RESET 160 +#define BLTOUCH_DEPLOY 10 +#define BLTOUCH_SW_MODE 60 +#define BLTOUCH_STOW 90 +#define BLTOUCH_SELFTEST 120 +#define BLTOUCH_5V_MODE 140 +#define BLTOUCH_OD_MODE 150 +#define BLTOUCH_RESET 160 + +/** + * The following commands may require different delays. + * + * ANTClabs recommends 2000ms for 5V/OD commands. However it is + * not common for other commands to immediately follow these, + * and testing has shown that these complete in 500ms reliably. + * + * AntClabs recommends 750ms for Deploy/Stow, otherwise you will + * not catch an alarm state until the following move command. + */ + +#ifndef BLTOUCH_SET5V_DELAY + #define BLTOUCH_SET5V_DELAY BLTOUCH_DELAY +#endif +#ifndef BLTOUCH_SETOD_DELAY + #define BLTOUCH_SETOD_DELAY BLTOUCH_DELAY +#endif +#ifndef BLTOUCH_DEPLOY_DELAY + #define BLTOUCH_DEPLOY_DELAY 750 +#endif +#ifndef BLTOUCH_STOW_DELAY + #define BLTOUCH_STOW_DELAY 750 +#endif +#ifndef BLTOUCH_RESET_DELAY + #define BLTOUCH_RESET_DELAY BLTOUCH_DELAY +#endif class BLTouch { public: - static void init(); - static void command(const BLTCommand cmd); - static bool triggered(); + static bool triggered(); // used by menu_advanced.cpp + static void init(); // used by main.cpp - FORCE_INLINE static void reset() { command(BLTOUCH_RESET); } - FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); } + // DEPLOY and STOW are wrapped for error handling - these are used by homing and by probing + FORCE_INLINE static bool deploy() { return deploy_proc(); } + FORCE_INLINE static bool stow() { return stow_proc(); } + FORCE_INLINE static bool status() { return status_proc(); } - FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); } - FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); } - FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); } + // Native BLTouch commands ("Underscore"...), used in lcd menus and internally + FORCE_INLINE static void _reset() { command(BLTOUCH_RESET, BLTOUCH_RESET_DELAY); } - FORCE_INLINE static bool deploy() { return set_deployed(true); } - FORCE_INLINE static bool stow() { return set_deployed(false); } + FORCE_INLINE static void _selftest() { command(BLTOUCH_SELFTEST, BLTOUCH_DELAY); } - FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY); } - FORCE_INLINE static void _stow() { command(BLTOUCH_STOW); } + FORCE_INLINE static void _set_SW_mode() { command(BLTOUCH_SW_MODE, BLTOUCH_DELAY); } + FORCE_INLINE static void _set_5V_mode() { command(BLTOUCH_5V_MODE, BLTOUCH_SET5V_DELAY); } + FORCE_INLINE static void _set_OD_mode() { command(BLTOUCH_OD_MODE, BLTOUCH_SETOD_DELAY); } + + FORCE_INLINE static void _deploy() { command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); } + FORCE_INLINE static void _stow() { command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); } private: - static bool set_deployed(const bool deploy); + FORCE_INLINE static bool _deploy_query_alarm() { return command(BLTOUCH_DEPLOY, BLTOUCH_DEPLOY_DELAY); } + FORCE_INLINE static bool _stow_query_alarm() { return command(BLTOUCH_STOW, BLTOUCH_STOW_DELAY); } + + static void clear(); + static bool command(const BLTCommand cmd, const millis_t &ms); + static bool deploy_proc(); + static bool stow_proc(); + static bool status_proc(); }; +// Deploy/stow angles for use by servo.cpp / servo.h #define BLTOUCH_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW } extern BLTouch bltouch; diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp index 36550a7bd7..66fa800169 100644 --- a/Marlin/src/gcode/calibrate/G34_M422.cpp +++ b/Marlin/src/gcode/calibrate/G34_M422.cpp @@ -112,8 +112,7 @@ void GcodeSuite::G34() { #endif #if ENABLED(BLTOUCH) - bltouch.reset(); - bltouch.stow(); + bltouch.init(); #endif // Always home with tool 0 active diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 764ccb5abc..752e399d7f 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -465,9 +465,6 @@ #undef SERVO_DELAY #define SERVO_DELAY { 50 } #endif - #ifndef BLTOUCH_DELAY - #define BLTOUCH_DELAY 375 - #endif // Always disable probe pin inverting for BLTouch #undef Z_MIN_PROBE_ENDSTOP_INVERTING diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 75f21a5606..11f1440b1a 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -1578,6 +1578,9 @@ #ifndef Z_CLEARANCE_MULTI_PROBE #define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES #endif + #if ENABLED(BLTOUCH) && !defined(BLTOUCH_DELAY) + #define BLTOUCH_DELAY 500 + #endif #endif #ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 6149745778..f012ae5a91 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -210,6 +210,10 @@ #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration." #elif defined(BLTOUCH_HEATERS_OFF) #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration." +#elif defined(BLTOUCH_V3) + #error "BLTOUCH_V3 is obsolete. Please update your configuration." +#elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE) + #error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration." #elif defined(BEEPER) #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." #elif defined(SDCARDDETECT) @@ -1018,6 +1022,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #endif #endif + #if ENABLED(BLTOUCH) + #if BLTOUCH_DELAY < 200 + #error "BLTOUCH_DELAY less than 200 is unsafe and is not supported." + #elif DISABLED(BLTOUCH_FORCE_5V_MODE) && NONE(ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE) + #error "BLTOUCH without BLTOUCH_FORCE_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE." + #endif + #endif + #if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X)) #error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X." #endif diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 801647d116..440177ab98 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -904,7 +904,7 @@ #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") #endif #ifndef MSG_BLTOUCH_SW_MODE - #define MSG_BLTOUCH_SW_MODE _UxGT("SW Deploy BLTouch") + #define MSG_BLTOUCH_SW_MODE _UxGT("BLTouch SW Mode") #endif #ifndef MSG_BLTOUCH_5V_MODE #define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V Mode") diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 3dab293334..25fa2c3dcd 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -174,15 +174,13 @@ static void lcd_factory_settings() { void menu_bltouch() { START_MENU(); MENU_BACK(MSG_MAIN); - MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch.reset); - MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch.selftest); + MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch._reset); + MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch._selftest); MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy); MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow); - #if ENABLED(BLTOUCH_V3) - MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch.set_SW_mode); - MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch.set_5V_mode); - MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch.set_OD_mode); - #endif + MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode); + MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch._set_5V_mode); + MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch._set_OD_mode); END_MENU(); } diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index e077045ef5..fdcc076db5 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -40,6 +40,10 @@ #include "printcounter.h" // for print_job_timer #endif +#if ENABLED(BLTOUCH) + #include "../feature/bltouch.h" +#endif + Endstops endstops; // private: @@ -381,6 +385,9 @@ static void print_es_state(const bool is_hit, PGM_P const label=NULL) { } void _O2 Endstops::M119() { + #if ENABLED(BLTOUCH) + bltouch._set_SW_mode(); + #endif SERIAL_ECHOLNPGM(MSG_M119_REPORT); #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S)) #if HAS_X_MIN @@ -457,6 +464,10 @@ void _O2 Endstops::M119() { } #endif #endif + #if ENABLED(BLTOUCH) + bltouch._reset(); + if (enabled_globally) bltouch._stow(); + #endif } // Endstops::M119 // The following routines are called from an ISR context. It could be the temperature ISR, the diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 39b6c8e8cf..20afebefd1 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -283,7 +283,7 @@ float zprobe_zoffset; // Initialized by settings.load() #endif #if ENABLED(PROBING_STEPPERS_OFF) disable_e_steppers(); - #if DISABLED(DELTA) + #if DISABLED(DELTA, HOME_AFTER_DEACTIVATE) disable_X(); disable_Y(); #endif #endif diff --git a/buildroot/share/tests/DUE-tests b/buildroot/share/tests/DUE-tests index e385c0e381..d13d9cc751 100755 --- a/buildroot/share/tests/DUE-tests +++ b/buildroot/share/tests/DUE-tests @@ -16,7 +16,7 @@ exec_test $1 $2 "RAMPS4DUE_EFB with S_CURVE_ACCELERATION, EEPROM_SETTINGS, GCODE restore_configs opt_set MOTHERBOARD BOARD_RADDS opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \ - Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN + Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN ENDSTOPPULLUPS opt_add Z2_MAX_ENDSTOP_INVERTING false opt_add Z3_MAX_ENDSTOP_INVERTING false pins_set RAMPS X_MAX_PIN -1 diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests index 5d40521229..0a0bddc395 100755 --- a/buildroot/share/tests/megaatmega2560-tests +++ b/buildroot/share/tests/megaatmega2560-tests @@ -273,7 +273,7 @@ exec_test $1 $2 "Full-featured CR-10S config" # # Delta Config (generic) + ABL bilinear + BLTOUCH use_example_configs delta/generic -opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_V3 +opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE exec_test $1 $2 "Delta Config (generic) + ABL bilinear + BLTOUCH" # # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 488445321e..0575d981f0 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index b8403ac3e9..06528ed798 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -834,18 +834,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 5e03652ff9..861f17643c 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -848,18 +848,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 2200e87d92..746246625e 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 393556cb6d..3250a45f5c 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -839,18 +839,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 3d9a46202d..b5a902bf0b 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index b284dbdf78..7db8d45d0b 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 07bf2f626e..d1a8f982cd 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -875,18 +875,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index d5952f8ef5..394aa32a44 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -841,18 +841,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index acff1b5937..61b7619e2e 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -838,18 +838,14 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index c1b897d24a..aa5fbdeb31 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -829,18 +829,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 5d1c1b76ed..85a1db1313 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index b7ee2b58bb..e7aaa01e1a 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index f825605263..38e1fce6dd 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 2fcccc607c..66f6bf1321 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -816,18 +816,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 80422c77b9..03b87da3bd 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -829,18 +829,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 7b9ee5d013..5da0a792ec 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -816,18 +816,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index a704cb33a2..d74b3a1d13 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -827,18 +827,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 4a68a71b11..7b56572bfd 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -838,18 +838,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 027b82974f..76184c285a 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 96bdcd2255..e6639de818 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -829,18 +829,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 8e6c6947c6..8a34bdd476 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -847,18 +847,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 86bf14a8f4..545e8a22e6 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -838,18 +838,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 1b321bf1fe..94511fc266 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -832,18 +832,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index c7d276d83c..79140e24e3 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -832,18 +832,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 94d4c6101e..df3728bf15 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -838,18 +838,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + #define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index dda435e160..1fbeefa04d 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -837,18 +837,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index 3f361f7de8..2e8bdd3509 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -810,18 +810,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 7bec95059a..dc4654bff9 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -810,18 +810,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index a246b02815..5224617634 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -820,18 +820,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index ea3dfc9633..abf120a208 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -834,18 +834,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 50526108be..a70ee8629e 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -911,18 +911,14 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 212210945e..e16b26ec32 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -857,18 +857,14 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 9a4297912b..fe7fb271a6 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -844,18 +844,14 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index f8195ed1fa..2bc3161707 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -811,18 +811,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 6d1a6b3ecc..4c36faea12 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -811,18 +811,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index a0d2df1c7f..0a03d3da72 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -843,18 +843,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index f12799fcaa..2e9f3924c8 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -828,7 +828,7 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - #define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 6ca3c99429..c9af63dcf1 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -835,18 +835,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index f7d3e036d4..3e9ab18fd3 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -848,18 +848,14 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index d88239e677..a22931c454 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -848,18 +848,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 8f423ba810..580c51f872 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 9a2d107893..11d0a32572 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 3b9462cd3c..da5b7adf0b 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -832,18 +832,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 9a8add1762..ec26bc97dd 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -840,18 +840,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 7532a1bade..1846765d2b 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -848,18 +848,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 39900c1159..55396c055d 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -848,18 +848,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index ca765a1d8a..a4d17ed268 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -827,18 +827,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index b06a3060bc..07556feb45 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -832,18 +832,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 08a5640eb3..5555d12276 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -832,18 +832,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 2ae14ade8f..0140f9b0eb 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -829,18 +829,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 46dd8fdf25..c9e9731c52 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 72f31a28dc..005a576f1f 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -836,18 +836,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index a86d56de72..7373e0ca41 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index ebc99a14b9..3425b43a5c 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -868,18 +868,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index d3256dc6e3..31df888e75 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 677c5b2541..eb423d5ab1 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -826,18 +826,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index 9f79c3025b..4f1d49111b 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -841,18 +841,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index dbf3e3513b..eb5af29aa3 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h index cf76763329..d7580be612 100644 --- a/config/examples/STM32/STM32F10/Configuration.h +++ b/config/examples/STM32/STM32F10/Configuration.h @@ -830,18 +830,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 1addba36f1..32c606f084 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 1f79272e5e..0090dbb6ee 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -830,18 +830,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 5078ca8b17..93f187ff4e 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -859,18 +859,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 0d283ea8f3..7fc477ea77 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 71b6b56584..70fcc0626c 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -879,18 +879,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 6e9b5a54fb..485d23a062 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index f3ee74d9c3..171b3fd161 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index de014625bb..c6f0e485b1 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -849,18 +849,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 2b64f122ff..1044b51526 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -827,18 +827,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 5d4a3b0178..1187f96610 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -839,18 +839,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 615e84302d..86c476c392 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 92ea66e3eb..53b4e36150 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index b78241ca30..3007ab374b 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -837,18 +837,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 6b08f5b3ab..6ed9553330 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -857,18 +857,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index 7ccadfe3d1..4eb6c5efb2 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index b46253c5f7..3334cfb5b7 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 70ec0fe03c..44be26a90c 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -847,18 +847,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 92724d5b32..1baf5e0608 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -838,18 +838,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index a1b6f5b6cc..47e8d3565a 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -828,18 +828,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 58c24e3e0f..3b0006240f 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -964,18 +964,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index f31a61e405..c69412b498 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -910,18 +910,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 97666605a0..b21b374aef 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -910,18 +910,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index f60a7a20ec..81ae7f6828 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -910,18 +910,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 7205caa75f..6eef6ee49b 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -900,18 +900,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index a615fe53d2..fc1da056bc 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -915,18 +915,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index a8ea180ced..1ca23819af 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -900,18 +900,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 4e720b3801..f63afa88d4 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -904,7 +904,7 @@ */ #define BLTOUCH #if ENABLED(BLTOUCH) - #define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index d759aad375..312e83c771 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -900,18 +900,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 7814babac3..723d3263f0 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -900,18 +900,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 561be8d2b6..aecd7761bf 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -893,18 +893,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 1ba2c138a0..0773a3f31c 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -903,18 +903,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 138d9148d7..f8971dfd86 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -831,18 +831,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index bf881bcb6b..da7f3839a5 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -823,18 +823,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index c747a5df1a..1b775eb947 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -833,18 +833,14 @@ */ //#define BLTOUCH #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed + //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed /** * BLTouch V3.0 and newer smart series * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV. * If the pin trigger is not detected, first try swapping the black and white wires then toggle this. */ - //#define BLTOUCH_V3 - #if ENABLED(BLTOUCH_V3) - //#define BLTOUCH_FORCE_5V_MODE - //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE - #endif + //#define BLTOUCH_FORCE_5V_MODE #endif // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)