MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🎨 Misc. variant cleanup, translation

Browse Source 
Followup to #24787
This commit is contained in:
Scott Lahteine 2022-10-19 21:00:14 -05:00
parent a913b2437b
commit 682a9b6fbe
5 changed files with 57 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
buildroot/share/PlatformIO/variants/MARLIN_F446Zx_TRONXY/variant.cpp
View File

@ -173,15 +173,15 @@ uint32_t myvar[] = {1,2,3,4,5,6,7,8};
void myshow(int fre, int times) // YSZ-WORK
{
uint32_t index = 10;
RCC->AHB1ENR |= 1 << 6;//端口G时钟
GPIOG->MODER &= ~(3UL << 2 * index);//清除旧模式
GPIOG->MODER |= 1 << 2 * index;//模式为输出
GPIOG->OSPEEDR &= ~(3UL << 2 * index); //清除旧输出速度
GPIOG->OSPEEDR |= 2 << 2 * index;//设置输出速度
GPIOG->OTYPER &= ~(1UL << index);//清除旧输出方式
GPIOG->OTYPER |= 0 << index;//设置输出方式为推挽
GPIOG->PUPDR &= ~(3 << 2 * index);//先清除原来的设置
GPIOG->PUPDR |= 1 << 2 * index;//设置新的上下拉
RCC->AHB1ENR |= 1 << 6; // port G clock
GPIOG->MODER &= ~(3UL << 2 * index); // clear old mode
GPIOG->MODER |= 1 << 2 * index; // mode is output
GPIOG->OSPEEDR &= ~(3UL << 2 * index) // Clear old output speed
GPIOG->OSPEEDR |= 2 << 2 * index; // Set output speed
GPIOG->OTYPER &= ~(1UL << index) // clear old output
GPIOG->OTYPER |= 0 << index; // Set the output mode to push-pull
GPIOG->PUPDR &= ~(3 << 2 * index) // Clear the original settings first
GPIOG->PUPDR |= 1 << 2 * index; // Set new up and down
while (times != 0) {
GPIOG->BSRR = 1UL << index;
for (int i = 0; i < fre; i++)
@ -204,35 +204,35 @@ HAL_StatusTypeDef SDMMC_IsProgramming(SDIO_TypeDef *SDIOx,uint32_t RCA)
sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT;
sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO;
sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE;
SDIO_SendCommand(SDIOx,&sdmmc_cmdinit);//发送CMD13
SDIO_SendCommand(SDIOx,&sdmmc_cmdinit); // send CMD13
do status = SDIOx->STA;
while(!(status & ((1 << 0) | (1 << 6) | (1 << 2))));//等待操作完成
if(status & (1 << 0)) //CRC检测失败
{
SDIOx->ICR |= 1 << 0; //清除错误标记
while (!(status & ((1 << 0) | (1 << 6) | (1 << 2)))); // wait for the operation to complete
if (status & (1 << 0)) { // CRC check failed
SDIOx->ICR |= 1 << 0; // clear error flag
return HAL_ERROR;
}
if(status & (1 << 2)) //命令超时
{
SDIOx->ICR |= 1 << 2; //清除错误标记
if (status & (1 << 2)) { // command timed out
SDIOx->ICR |= 1 << 2; // clear error flag
return HAL_ERROR;
}
if (SDIOx->RESPCMD != SDMMC_CMD_SEND_STATUS) return HAL_ERROR;
SDIOx->ICR = 0X5FF; //清除所有标记
SDIOx->ICR = 0X5FF; // clear all tags
respR1 = SDIOx->RESP1;
CardState = (respR1 >> 9) & 0x0000000F;
} while ((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING) || (CardState == HAL_SD_CARD_PROGRAMMING));
return HAL_OK;
}
void debugStr(const char *str) {
while (*str) {
while ((USART1->SR & 0x40) == 0);
USART1->DR = *str++;
}
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* The system Clock is configured as follows:
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 168000000/120000000/180000000
* HCLK(Hz) = 168000000/120000000/180000000
@ -294,8 +294,7 @@ WEAK void SystemClock_Config(void)
PeriphClkInitStruct.SdioClockSelection = RCC_SDIOCLKSOURCE_CLK48; // SDIO Clock Mux
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
@ -304,19 +303,18 @@ WEAK void SystemClock_Config(void)
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
if (ret != HAL_OK) myshow(10,-1);
SystemCoreClockUpdate();//更新系统时钟SystemCoreClock
/**Configure the Systick interrupt time
*/
SystemCoreClockUpdate();
/* Configure the Systick interrupt time */
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
/**Configure the Systick
*/
/* Configure the Systick */
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
/* SysTick_IRQn interrupt configuration */
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
__enable_irq();//打开中断,因为在bootloader中关闭了,所以这里要打开
__enable_irq(); // Turn on the interrupt here because it is turned off in the bootloader
}
#ifdef __cplusplus
}
#endif

1
buildroot/share/PlatformIO/variants/MARLIN_F446Zx_TRONXY/variant.h
View File

@ -26,6 +26,7 @@ extern "C" {
extern unsigned long myvar[];
void myshow(int fre, int times);
void debugStr(const char *str);
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/