Use code_value_linear_units for known-linear axes

This commit is contained in:
Scott Lahteine 2017-04-16 21:55:17 -05:00 committed by Scott Lahteine
parent b956f2642b
commit 69dfa54a84

View File

@ -1285,19 +1285,19 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() >
volumetric_unit_factor = pow(linear_unit_factor, 3.0); volumetric_unit_factor = pow(linear_unit_factor, 3.0);
} }
inline float axis_unit_factor(int axis) { inline float axis_unit_factor(const AxisEnum axis) {
return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
} }
inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; } inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; }
inline float code_value_axis_units(int axis) { return code_value_float() * axis_unit_factor(axis); } inline float code_value_axis_units(const AxisEnum axis) { return code_value_float() * axis_unit_factor(axis); }
inline float code_value_per_axis_unit(int axis) { return code_value_float() / axis_unit_factor(axis); } inline float code_value_per_axis_unit(const AxisEnum axis) { return code_value_float() / axis_unit_factor(axis); }
#else #else
inline float code_value_linear_units() { return code_value_float(); } #define code_value_linear_units() code_value_float()
inline float code_value_axis_units(int axis) { UNUSED(axis); return code_value_float(); } #define code_value_axis_units(A) code_value_float()
inline float code_value_per_axis_unit(int axis) { UNUSED(axis); return code_value_float(); } #define code_value_per_axis_unit(A) code_value_float()
#endif #endif
@ -3063,7 +3063,7 @@ static void homeaxis(const AxisEnum axis) {
void gcode_get_destination() { void gcode_get_destination() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) if (code_seen(axis_codes[i]))
destination[i] = code_value_axis_units(i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0); destination[i] = code_value_axis_units((AxisEnum)i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0);
else else
destination[i] = current_position[i]; destination[i] = current_position[i];
} }
@ -3232,7 +3232,7 @@ inline void gcode_G0_G1(
float arc_offset[2] = { 0.0, 0.0 }; float arc_offset[2] = { 0.0, 0.0 };
if (code_seen('R')) { if (code_seen('R')) {
const float r = code_value_axis_units(X_AXIS), const float r = code_value_linear_units(),
x1 = current_position[X_AXIS], y1 = current_position[Y_AXIS], x1 = current_position[X_AXIS], y1 = current_position[Y_AXIS],
x2 = destination[X_AXIS], y2 = destination[Y_AXIS]; x2 = destination[X_AXIS], y2 = destination[Y_AXIS];
if (r && (x2 != x1 || y2 != y1)) { if (r && (x2 != x1 || y2 != y1)) {
@ -3248,8 +3248,8 @@ inline void gcode_G0_G1(
} }
} }
else { else {
if (code_seen('I')) arc_offset[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('I')) arc_offset[X_AXIS] = code_value_linear_units();
if (code_seen('J')) arc_offset[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('J')) arc_offset[Y_AXIS] = code_value_linear_units();
} }
if (arc_offset[0] || arc_offset[1]) { if (arc_offset[0] || arc_offset[1]) {
@ -3302,10 +3302,10 @@ inline void gcode_G4() {
gcode_get_destination(); gcode_get_destination();
const float offset[] = { const float offset[] = {
code_seen('I') ? code_value_axis_units(X_AXIS) : 0.0, code_seen('I') ? code_value_linear_units() : 0.0,
code_seen('J') ? code_value_axis_units(Y_AXIS) : 0.0, code_seen('J') ? code_value_linear_units() : 0.0,
code_seen('P') ? code_value_axis_units(X_AXIS) : 0.0, code_seen('P') ? code_value_linear_units() : 0.0,
code_seen('Q') ? code_value_axis_units(Y_AXIS) : 0.0 code_seen('Q') ? code_value_linear_units() : 0.0
}; };
plan_cubic_move(offset); plan_cubic_move(offset);
@ -4023,7 +4023,7 @@ inline void gcode_G28() {
} }
if (code_seen('Z')) { if (code_seen('Z')) {
mbl.z_values[px][py] = code_value_axis_units(Z_AXIS); mbl.z_values[px][py] = code_value_linear_units();
} }
else { else {
SERIAL_CHAR('Z'); say_not_entered(); SERIAL_CHAR('Z'); say_not_entered();
@ -4033,7 +4033,7 @@ inline void gcode_G28() {
case MeshSetZOffset: case MeshSetZOffset:
if (code_seen('Z')) { if (code_seen('Z')) {
mbl.z_offset = code_value_axis_units(Z_AXIS); mbl.z_offset = code_value_linear_units();
} }
else { else {
SERIAL_CHAR('Z'); say_not_entered(); SERIAL_CHAR('Z'); say_not_entered();
@ -4305,7 +4305,7 @@ inline void gcode_G28() {
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
zoffset = code_seen('Z') ? code_value_axis_units(Z_AXIS) : 0; zoffset = code_seen('Z') ? code_value_linear_units() : 0;
#endif #endif
@ -4313,10 +4313,10 @@ inline void gcode_G28() {
xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED); xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED);
left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION); left_probe_bed_position = code_seen('L') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION);
right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION); right_probe_bed_position = code_seen('R') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION);
front_probe_bed_position = code_seen('F') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION); front_probe_bed_position = code_seen('F') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION);
back_probe_bed_position = code_seen('B') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION); back_probe_bed_position = code_seen('B') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION);
const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X), const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X),
left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE), left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE),
@ -4927,8 +4927,8 @@ inline void gcode_G28() {
* S = Stows the probe if 1 (default=1) * S = Stows the probe if 1 (default=1)
*/ */
inline void gcode_G30() { inline void gcode_G30() {
float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER, float X_probe_location = code_seen('X') ? code_value_linear_units() : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER,
Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER; Y_probe_location = code_seen('Y') ? code_value_linear_units() : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER;
float pos[XYZ] = { X_probe_location, Y_probe_location, LOGICAL_Z_POSITION(0) }; float pos[XYZ] = { X_probe_location, Y_probe_location, LOGICAL_Z_POSITION(0) };
if (!position_is_reachable(pos, true)) return; if (!position_is_reachable(pos, true)) return;
@ -5431,13 +5431,13 @@ inline void gcode_G92() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
#if IS_SCARA #if IS_SCARA
current_position[i] = code_value_axis_units(i); current_position[i] = code_value_axis_units((AxisEnum)i);
if (i != E_AXIS) didXYZ = true; if (i != E_AXIS) didXYZ = true;
#else #else
#if HAS_POSITION_SHIFT #if HAS_POSITION_SHIFT
float p = current_position[i]; const float p = current_position[i];
#endif #endif
float v = code_value_axis_units(i); float v = code_value_axis_units((AxisEnum)i);
current_position[i] = v; current_position[i] = v;
@ -6078,7 +6078,7 @@ inline void gcode_M42() {
bool stow_probe_after_each = code_seen('E'); bool stow_probe_after_each = code_seen('E');
float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : X_current + X_PROBE_OFFSET_FROM_EXTRUDER; float X_probe_location = code_seen('X') ? code_value_linear_units() : X_current + X_PROBE_OFFSET_FROM_EXTRUDER;
#if DISABLED(DELTA) #if DISABLED(DELTA)
if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) { if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) {
out_of_range_error(PSTR("X")); out_of_range_error(PSTR("X"));
@ -6086,7 +6086,7 @@ inline void gcode_M42() {
} }
#endif #endif
float Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER; float Y_probe_location = code_seen('Y') ? code_value_linear_units() : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER;
#if DISABLED(DELTA) #if DISABLED(DELTA)
if (!WITHIN(Y_probe_location, LOGICAL_Y_POSITION(MIN_PROBE_Y), LOGICAL_Y_POSITION(MAX_PROBE_Y))) { if (!WITHIN(Y_probe_location, LOGICAL_Y_POSITION(MIN_PROBE_Y), LOGICAL_Y_POSITION(MAX_PROBE_Y))) {
out_of_range_error(PSTR("Y")); out_of_range_error(PSTR("Y"));
@ -7063,7 +7063,7 @@ inline void gcode_M92() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
if (i == E_AXIS) { if (i == E_AXIS) {
float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER); const float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER);
if (value < 20.0) { if (value < 20.0) {
float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab.
planner.max_jerk[E_AXIS] *= factor; planner.max_jerk[E_AXIS] *= factor;
@ -7250,7 +7250,7 @@ inline void gcode_M121() { endstops.enable_globally(false); }
RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE);
// Lift Z axis // Lift Z axis
const float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : const float z_lift = code_seen('Z') ? code_value_linear_units() :
#if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0
FILAMENT_CHANGE_Z_ADD FILAMENT_CHANGE_Z_ADD
#else #else
@ -7264,12 +7264,12 @@ inline void gcode_M121() { endstops.enable_globally(false); }
} }
// Move XY axes to filament change position or given position // Move XY axes to filament change position or given position
destination[X_AXIS] = code_seen('X') ? code_value_axis_units(X_AXIS) : 0 destination[X_AXIS] = code_seen('X') ? code_value_linear_units() : 0
#ifdef FILAMENT_CHANGE_X_POS #ifdef FILAMENT_CHANGE_X_POS
+ FILAMENT_CHANGE_X_POS + FILAMENT_CHANGE_X_POS
#endif #endif
; ;
destination[Y_AXIS] = code_seen('Y') ? code_value_axis_units(Y_AXIS) : 0 destination[Y_AXIS] = code_seen('Y') ? code_value_linear_units() : 0
#ifdef FILAMENT_CHANGE_Y_POS #ifdef FILAMENT_CHANGE_Y_POS
+ FILAMENT_CHANGE_Y_POS + FILAMENT_CHANGE_Y_POS
#endif #endif
@ -7355,10 +7355,6 @@ inline void gcode_M200() {
if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA; if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
} }
} }
else {
//reserved for setting filament diameter via UFID or filament measuring device
return;
}
calculate_volumetric_multipliers(); calculate_volumetric_multipliers();
} }
@ -7374,7 +7370,7 @@ inline void gcode_M201() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_acceleration_mm_per_s2[a] = code_value_axis_units(a); planner.max_acceleration_mm_per_s2[a] = code_value_axis_units((AxisEnum)a);
} }
} }
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
@ -7384,7 +7380,7 @@ inline void gcode_M201() {
#if 0 // Not used for Sprinter/grbl gen6 #if 0 // Not used for Sprinter/grbl gen6
inline void gcode_M202() { inline void gcode_M202() {
LOOP_XYZE(i) { LOOP_XYZE(i) {
if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units(i) * planner.axis_steps_per_mm[i]; if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units((AxisEnum)i) * planner.axis_steps_per_mm[i];
} }
} }
#endif #endif
@ -7402,7 +7398,7 @@ inline void gcode_M203() {
LOOP_XYZE(i) LOOP_XYZE(i)
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
planner.max_feedrate_mm_s[a] = code_value_axis_units(a); planner.max_feedrate_mm_s[a] = code_value_axis_units((AxisEnum)a);
} }
} }
@ -7449,10 +7445,10 @@ inline void gcode_M205() {
if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units(); if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units();
if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units(); if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units();
if (code_seen('B')) planner.min_segment_time = code_value_millis(); if (code_seen('B')) planner.min_segment_time = code_value_millis();
if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_linear_units();
if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_linear_units();
if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_axis_units(Z_AXIS); if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_linear_units();
if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_axis_units(E_AXIS); if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_linear_units();
} }
#if HAS_M206_COMMAND #if HAS_M206_COMMAND
@ -7463,11 +7459,11 @@ inline void gcode_M205() {
inline void gcode_M206() { inline void gcode_M206() {
LOOP_XYZ(i) LOOP_XYZ(i)
if (code_seen(axis_codes[i])) if (code_seen(axis_codes[i]))
set_home_offset((AxisEnum)i, code_value_axis_units(i)); set_home_offset((AxisEnum)i, code_value_linear_units());
#if ENABLED(MORGAN_SCARA) #if ENABLED(MORGAN_SCARA)
if (code_seen('T')) set_home_offset(A_AXIS, code_value_axis_units(A_AXIS)); // Theta if (code_seen('T')) set_home_offset(A_AXIS, code_value_linear_units()); // Theta
if (code_seen('P')) set_home_offset(B_AXIS, code_value_axis_units(B_AXIS)); // Psi if (code_seen('P')) set_home_offset(B_AXIS, code_value_linear_units()); // Psi
#endif #endif
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
@ -7517,7 +7513,7 @@ inline void gcode_M205() {
#endif #endif
LOOP_XYZ(i) { LOOP_XYZ(i) {
if (code_seen(axis_codes[i])) { if (code_seen(axis_codes[i])) {
endstop_adj[i] = code_value_axis_units(i); endstop_adj[i] = code_value_linear_units();
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]); SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]);
@ -7539,7 +7535,7 @@ inline void gcode_M205() {
* M666: For Z Dual Endstop setup, set z axis offset to the z2 axis. * M666: For Z Dual Endstop setup, set z axis offset to the z2 axis.
*/ */
inline void gcode_M666() { inline void gcode_M666() {
if (code_seen('Z')) z_endstop_adj = code_value_axis_units(Z_AXIS); if (code_seen('Z')) z_endstop_adj = code_value_linear_units();
SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj); SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj);
} }
@ -7558,7 +7554,7 @@ inline void gcode_M205() {
inline void gcode_M207() { inline void gcode_M207() {
if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS); if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS);
if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS)); if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS));
if (code_seen('Z')) retract_zlift = code_value_axis_units(Z_AXIS); if (code_seen('Z')) retract_zlift = code_value_linear_units();
#if EXTRUDERS > 1 #if EXTRUDERS > 1
if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS); if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS);
#endif #endif
@ -7631,11 +7627,11 @@ inline void gcode_M211() {
inline void gcode_M218() { inline void gcode_M218() {
if (get_target_extruder_from_command(218) || target_extruder == 0) return; if (get_target_extruder_from_command(218) || target_extruder == 0) return;
if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_axis_units(X_AXIS); if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_linear_units();
if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_linear_units();
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER) #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER)
if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_axis_units(Z_AXIS); if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_linear_units();
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -8285,11 +8281,11 @@ void quickstop_stepper() {
int8_t px = 0, py = 0; int8_t px = 0, py = 0;
float z = 0; float z = 0;
bool hasX, hasY, hasZ, hasI, hasJ; bool hasX, hasY, hasZ, hasI, hasJ;
if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_axis_units(X_AXIS)); if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_linear_units());
if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_axis_units(Y_AXIS)); if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_linear_units());
if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); if ((hasI = code_seen('I'))) px = code_value_linear_units();
if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); if ((hasJ = code_seen('J'))) py = code_value_linear_units();
if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
if (hasX && hasY && hasZ) { if (hasX && hasY && hasZ) {
@ -8325,9 +8321,9 @@ void quickstop_stepper() {
int8_t px = 0, py = 0; int8_t px = 0, py = 0;
float z = 0; float z = 0;
bool hasI, hasJ, hasZ; bool hasI, hasJ, hasZ;
if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); if ((hasI = code_seen('I'))) px = code_value_linear_units();
if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); if ((hasJ = code_seen('J'))) py = code_value_linear_units();
if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); if ((hasZ = code_seen('Z'))) z = code_value_linear_units();
if (hasI && hasJ && hasZ) { if (hasI && hasJ && hasZ) {
if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_X - 1)) { if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_X - 1)) {
@ -8474,7 +8470,7 @@ inline void gcode_M503() {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " "); SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " ");
if (code_seen('Z')) { if (code_seen('Z')) {
const float value = code_value_axis_units(Z_AXIS); const float value = code_value_linear_units();
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
zprobe_zoffset = value; zprobe_zoffset = value;
refresh_zprobe_zoffset(); refresh_zprobe_zoffset();
@ -8557,7 +8553,7 @@ inline void gcode_M503() {
RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE);
// Lift Z axis // Lift Z axis
float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : float z_lift = code_seen('Z') ? code_value_linear_units() :
#if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0
FILAMENT_CHANGE_Z_ADD FILAMENT_CHANGE_Z_ADD
#else #else
@ -8572,12 +8568,12 @@ inline void gcode_M503() {
} }
// Move XY axes to filament exchange position // Move XY axes to filament exchange position
if (code_seen('X')) destination[X_AXIS] = code_value_axis_units(X_AXIS); if (code_seen('X')) destination[X_AXIS] = code_value_linear_units();
#ifdef FILAMENT_CHANGE_X_POS #ifdef FILAMENT_CHANGE_X_POS
else destination[X_AXIS] = FILAMENT_CHANGE_X_POS; else destination[X_AXIS] = FILAMENT_CHANGE_X_POS;
#endif #endif
if (code_seen('Y')) destination[Y_AXIS] = code_value_axis_units(Y_AXIS); if (code_seen('Y')) destination[Y_AXIS] = code_value_linear_units();
#ifdef FILAMENT_CHANGE_Y_POS #ifdef FILAMENT_CHANGE_Y_POS
else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS; else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS;
#endif #endif
@ -8766,7 +8762,7 @@ inline void gcode_M503() {
case DXC_AUTO_PARK_MODE: case DXC_AUTO_PARK_MODE:
break; break;
case DXC_DUPLICATION_MODE: case DXC_DUPLICATION_MODE:
if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_axis_units(X_AXIS), X2_MIN_POS - x_home_pos(0)); if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_linear_units(), X2_MIN_POS - x_home_pos(0));
if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff(); if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff();
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
@ -9127,7 +9123,7 @@ inline void gcode_M355() {
* *
*/ */
inline void gcode_M163() { inline void gcode_M163() {
int mix_index = code_seen('S') ? code_value_int() : 0; const int mix_index = code_seen('S') ? code_value_int() : 0;
if (mix_index < MIXING_STEPPERS) { if (mix_index < MIXING_STEPPERS) {
float mix_value = code_seen('P') ? code_value_float() : 0.0; float mix_value = code_seen('P') ? code_value_float() : 0.0;
NOLESS(mix_value, 0.0); NOLESS(mix_value, 0.0);
@ -9144,7 +9140,7 @@ inline void gcode_M355() {
* *
*/ */
inline void gcode_M164() { inline void gcode_M164() {
int tool_index = code_seen('S') ? code_value_int() : 0; const int tool_index = code_seen('S') ? code_value_int() : 0;
if (tool_index < MIXING_VIRTUAL_TOOLS) { if (tool_index < MIXING_VIRTUAL_TOOLS) {
normalize_mix(); normalize_mix();
for (uint8_t i = 0; i < MIXING_STEPPERS; i++) for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
@ -9542,7 +9538,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
tool_change( tool_change(
tmp_extruder, tmp_extruder,
code_seen('F') ? MMM_TO_MMS(code_value_axis_units(X_AXIS)) : 0.0, code_seen('F') ? MMM_TO_MMS(code_value_linear_units()) : 0.0,
(tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool()) (tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool())
); );