MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🐛 Finish and organize temp sensors (#23519)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
zerkix 2022-01-17 07:05:31 +01:00 committed by Scott Lahteine
parent ab40c99893
commit 70f03ad852
11 changed files with 144 additions and 229 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/ESP32/HAL.cpp
View File

@ -211,7 +211,9 @@ void HAL_adc_init() {
TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db)); TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db)); TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db)); TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_PROBE, adc1_set_attenuation(get_channel(TEMP_PROBE_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db)); TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_BOARD, adc1_set_attenuation(get_channel(TEMP_BOARD_PIN), ADC_ATTEN_11db));
TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db)); TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
// Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail. // Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.

42
Marlin/src/HAL/SAMD51/HAL.cpp
View File

@ -54,20 +54,22 @@
#define GET_TEMP_5_ADC() TERN(HAS_TEMP_ADC_5, PIN_TO_ADC(TEMP_5_PIN), -1) #define GET_TEMP_5_ADC() TERN(HAS_TEMP_ADC_5, PIN_TO_ADC(TEMP_5_PIN), -1)
#define GET_TEMP_6_ADC() TERN(HAS_TEMP_ADC_6, PIN_TO_ADC(TEMP_6_PIN), -1) #define GET_TEMP_6_ADC() TERN(HAS_TEMP_ADC_6, PIN_TO_ADC(TEMP_6_PIN), -1)
#define GET_TEMP_7_ADC() TERN(HAS_TEMP_ADC_7, PIN_TO_ADC(TEMP_7_PIN), -1) #define GET_TEMP_7_ADC() TERN(HAS_TEMP_ADC_7, PIN_TO_ADC(TEMP_7_PIN), -1)
#define GET_PROBE_ADC() TERN(HAS_TEMP_PROBE, PIN_TO_ADC(TEMP_PROBE_PIN), -1)
#define GET_BED_ADC() TERN(HAS_TEMP_ADC_BED, PIN_TO_ADC(TEMP_BED_PIN), -1) #define GET_BED_ADC() TERN(HAS_TEMP_ADC_BED, PIN_TO_ADC(TEMP_BED_PIN), -1)
#define GET_CHAMBER_ADC() TERN(HAS_TEMP_ADC_CHAMBER, PIN_TO_ADC(TEMP_CHAMBER_PIN), -1) #define GET_CHAMBER_ADC() TERN(HAS_TEMP_ADC_CHAMBER, PIN_TO_ADC(TEMP_CHAMBER_PIN), -1)
#define GET_PROBE_ADC() TERN(HAS_TEMP_ADC_PROBE, PIN_TO_ADC(TEMP_PROBE_PIN), -1)
#define GET_COOLER_ADC() TERN(HAS_TEMP_ADC_COOLER, PIN_TO_ADC(TEMP_COOLER_PIN), -1) #define GET_COOLER_ADC() TERN(HAS_TEMP_ADC_COOLER, PIN_TO_ADC(TEMP_COOLER_PIN), -1)
#define GET_BOARD_ADC() TERN(HAS_TEMP_ADC_BOARD, PIN_TO_ADC(TEMP_BOARD_PIN), -1)
#define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1) #define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1)
#define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1) #define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1)
#define IS_ADC_REQUIRED(n) ( \ #define IS_ADC_REQUIRED(n) ( \
GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \ GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \
|| GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n || GET_TEMP_6_ADC() == n || GET_TEMP_7_ADC() == n \ || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n || GET_TEMP_6_ADC() == n || GET_TEMP_7_ADC() == n \
|| GET_PROBE_ADC() == n \
|| GET_BED_ADC() == n \ || GET_BED_ADC() == n \
|| GET_CHAMBER_ADC() == n \ || GET_CHAMBER_ADC() == n \
|| GET_PROBE_ADC() == n \
|| GET_COOLER_ADC() == n \ || GET_COOLER_ADC() == n \
|| GET_BOARD_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \ || GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n \ || GET_BUTTONS_ADC() == n \
) )
@ -137,18 +139,21 @@ uint16_t HAL_adc_result;
#if GET_TEMP_7_ADC() == 0 #if GET_TEMP_7_ADC() == 0
TEMP_7_PIN, TEMP_7_PIN,
#endif #endif
#if GET_PROBE_ADC() == 0
TEMP_PROBE_PIN,
#endif
#if GET_BED_ADC() == 0 #if GET_BED_ADC() == 0
TEMP_BED_PIN, TEMP_BED_PIN,
#endif #endif
#if GET_CHAMBER_ADC() == 0 #if GET_CHAMBER_ADC() == 0
TEMP_CHAMBER_PIN, TEMP_CHAMBER_PIN,
#endif #endif
#if GET_PROBE_ADC() == 0
TEMP_PROBE_PIN,
#endif
#if GET_COOLER_ADC() == 0 #if GET_COOLER_ADC() == 0
TEMP_COOLER_PIN, TEMP_COOLER_PIN,
#endif #endif
#if GET_BOARD_ADC() == 0
TEMP_BOARD_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0 #if GET_FILAMENT_WIDTH_ADC() == 0
FILWIDTH_PIN, FILWIDTH_PIN,
#endif #endif
@ -180,18 +185,21 @@ uint16_t HAL_adc_result;
#if GET_TEMP_7_ADC() == 1 #if GET_TEMP_7_ADC() == 1
TEMP_7_PIN, TEMP_7_PIN,
#endif #endif
#if GET_PROBE_ADC() == 1
TEMP_PROBE_PIN,
#endif
#if GET_BED_ADC() == 1 #if GET_BED_ADC() == 1
TEMP_BED_PIN, TEMP_BED_PIN,
#endif #endif
#if GET_CHAMBER_ADC() == 1 #if GET_CHAMBER_ADC() == 1
TEMP_CHAMBER_PIN, TEMP_CHAMBER_PIN,
#endif #endif
#if GET_PROBE_ADC() == 1
TEMP_PROBE_PIN,
#endif
#if GET_COOLER_ADC() == 1 #if GET_COOLER_ADC() == 1
TEMP_COOLER_PIN, TEMP_COOLER_PIN,
#endif #endif
#if GET_BOARD_ADC() == 1
TEMP_BOARD_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1 #if GET_FILAMENT_WIDTH_ADC() == 1
FILWIDTH_PIN, FILWIDTH_PIN,
#endif #endif
@ -231,18 +239,21 @@ uint16_t HAL_adc_result;
#if GET_TEMP_7_ADC() == 0 #if GET_TEMP_7_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_7_PIN) }, { PIN_TO_INPUTCTRL(TEMP_7_PIN) },
#endif #endif
#if GET_PROBE_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif
#if GET_BED_ADC() == 0 #if GET_BED_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_BED_PIN) }, { PIN_TO_INPUTCTRL(TEMP_BED_PIN) },
#endif #endif
#if GET_CHAMBER_ADC() == 0 #if GET_CHAMBER_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) }, { PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif #endif
#if GET_PROBE_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif
#if GET_COOLER_ADC() == 0 #if GET_COOLER_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) }, { PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
#endif #endif
#if GET_BOARD_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_BOARD_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0 #if GET_FILAMENT_WIDTH_ADC() == 0
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) }, { PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif #endif
@ -283,18 +294,21 @@ uint16_t HAL_adc_result;
#if GET_TEMP_7_ADC() == 1 #if GET_TEMP_7_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_7_PIN) }, { PIN_TO_INPUTCTRL(TEMP_7_PIN) },
#endif #endif
#if GET_PROBE_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif
#if GET_BED_ADC() == 1 #if GET_BED_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_BED_PIN) }, { PIN_TO_INPUTCTRL(TEMP_BED_PIN) },
#endif #endif
#if GET_CHAMBER_ADC() == 1 #if GET_CHAMBER_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) }, { PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif #endif
#if GET_PROBE_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif
#if GET_COOLER_ADC() == 1 #if GET_COOLER_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) }, { PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
#endif #endif
#if GET_BOARD_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_BOARD_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1 #if GET_FILAMENT_WIDTH_ADC() == 1
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) }, { PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif #endif

233
Marlin/src/HAL/STM32F1/HAL.cpp
View File

@ -120,123 +120,49 @@ uint16_t HAL_adc_result;
STM32ADC adc(ADC1); STM32ADC adc(ADC1);
const uint8_t adc_pins[] = { const uint8_t adc_pins[] = {
#if HAS_TEMP_ADC_0 OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN)
TEMP_0_PIN, OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN)
#endif OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN)
#if HAS_TEMP_ADC_PROBE OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN)
TEMP_PROBE_PIN, OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN)
#endif OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN)
#if HAS_HEATED_BED OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN)
TEMP_BED_PIN, OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN)
#endif OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN)
#if HAS_TEMP_CHAMBER OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN)
TEMP_CHAMBER_PIN, OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN)
#endif OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN)
#if HAS_TEMP_COOLER OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN)
TEMP_COOLER_PIN, OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN)
#endif OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN)
#if HAS_TEMP_ADC_1 OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN)
TEMP_1_PIN, OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN)
#endif OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN)
#if HAS_TEMP_ADC_2 OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN)
TEMP_2_PIN, OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN)
#endif
#if HAS_TEMP_ADC_3
TEMP_3_PIN,
#endif
#if HAS_TEMP_ADC_4
TEMP_4_PIN,
#endif
#if HAS_TEMP_ADC_5
TEMP_5_PIN,
#endif
#if HAS_TEMP_ADC_6
TEMP_6_PIN,
#endif
#if HAS_TEMP_ADC_7
TEMP_7_PIN,
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH_PIN,
#endif
#if HAS_ADC_BUTTONS
ADC_KEYPAD_PIN,
#endif
#if HAS_JOY_ADC_X
JOY_X_PIN,
#endif
#if HAS_JOY_ADC_Y
JOY_Y_PIN,
#endif
#if HAS_JOY_ADC_Z
JOY_Z_PIN,
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
POWER_MONITOR_CURRENT_PIN,
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
POWER_MONITOR_VOLTAGE_PIN,
#endif
}; };
enum TempPinIndex : char { enum TempPinIndex : char {
#if HAS_TEMP_ADC_0 OPTITEM(HAS_TEMP_ADC_0, TEMP_0)
TEMP_0, OPTITEM(HAS_TEMP_ADC_1, TEMP_1)
#endif OPTITEM(HAS_TEMP_ADC_2, TEMP_2)
#if HAS_TEMP_ADC_PROBE OPTITEM(HAS_TEMP_ADC_3, TEMP_3)
TEMP_PROBE, OPTITEM(HAS_TEMP_ADC_4, TEMP_4)
#endif OPTITEM(HAS_TEMP_ADC_5, TEMP_5)
#if HAS_HEATED_BED OPTITEM(HAS_TEMP_ADC_6, TEMP_6)
TEMP_BED, OPTITEM(HAS_TEMP_ADC_7, TEMP_7)
#endif OPTITEM(HAS_HEATED_BED, TEMP_BED)
#if HAS_TEMP_CHAMBER OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER)
TEMP_CHAMBER, OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE)
#endif OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER)
#if HAS_TEMP_COOLER OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD)
TEMP_COOLER_PIN, OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH)
#endif OPTITEM(HAS_ADC_BUTTONS, ADC_KEY)
#if HAS_TEMP_ADC_1 OPTITEM(HAS_JOY_ADC_X, JOY_X)
TEMP_1, OPTITEM(HAS_JOY_ADC_Y, JOY_Y)
#endif OPTITEM(HAS_JOY_ADC_Z, JOY_Z)
#if HAS_TEMP_ADC_2 OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT)
TEMP_2, OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS)
#endif
#if HAS_TEMP_ADC_3
TEMP_3,
#endif
#if HAS_TEMP_ADC_4
TEMP_4,
#endif
#if HAS_TEMP_ADC_5
TEMP_5,
#endif
#if HAS_TEMP_ADC_6
TEMP_6,
#endif
#if HAS_TEMP_ADC_7
TEMP_7,
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH,
#endif
#if HAS_ADC_BUTTONS
ADC_KEY,
#endif
#if HAS_JOY_ADC_X
JOY_X,
#endif
#if HAS_JOY_ADC_Y
JOY_Y,
#endif
#if HAS_JOY_ADC_Z
JOY_Z,
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
POWERMON_CURRENT,
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
POWERMON_VOLTS,
#endif
ADC_PIN_COUNT ADC_PIN_COUNT
}; };
@ -375,67 +301,32 @@ void HAL_adc_init() {
} }
void HAL_adc_start_conversion(const uint8_t adc_pin) { void HAL_adc_start_conversion(const uint8_t adc_pin) {
#define __TCASE(N,I) case N: pin_index = I; break;
#define _TCASE(C,N,I) TERN_(C, __TCASE(N, I))
//TEMP_PINS pin_index; //TEMP_PINS pin_index;
TempPinIndex pin_index; TempPinIndex pin_index;
switch (adc_pin) { switch (adc_pin) {
default: return; default: return;
#if HAS_TEMP_ADC_0 _TCASE(HAS_TEMP_ADC_0, TEMP_0_PIN, TEMP_0)
case TEMP_0_PIN: pin_index = TEMP_0; break; _TCASE(HAS_TEMP_ADC_1, TEMP_1_PIN, TEMP_1)
#endif _TCASE(HAS_TEMP_ADC_2, TEMP_2_PIN, TEMP_2)
#if HAS_TEMP_ADC_PROBE _TCASE(HAS_TEMP_ADC_3, TEMP_3_PIN, TEMP_3)
case TEMP_PROBE_PIN: pin_index = TEMP_PROBE; break; _TCASE(HAS_TEMP_ADC_4, TEMP_4_PIN, TEMP_4)
#endif _TCASE(HAS_TEMP_ADC_5, TEMP_5_PIN, TEMP_5)
#if HAS_HEATED_BED _TCASE(HAS_TEMP_ADC_6, TEMP_6_PIN, TEMP_6)
case TEMP_BED_PIN: pin_index = TEMP_BED; break; _TCASE(HAS_TEMP_ADC_7, TEMP_7_PIN, TEMP_7)
#endif _TCASE(HAS_HEATED_BED, TEMP_BED_PIN, TEMP_BED)
#if HAS_TEMP_CHAMBER _TCASE(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN, TEMP_CHAMBER)
case TEMP_CHAMBER_PIN: pin_index = TEMP_CHAMBER; break; _TCASE(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN, TEMP_PROBE)
#endif _TCASE(HAS_TEMP_COOLER, TEMP_COOLER_PIN, TEMP_COOLER)
#if HAS_TEMP_COOLER _TCASE(HAS_TEMP_BOARD, TEMP_BOARD_PIN, TEMP_BOARD)
case TEMP_COOLER_PIN: pin_index = TEMP_COOLER; break; _TCASE(HAS_JOY_ADC_X, JOY_X_PIN, JOY_X)
#endif _TCASE(HAS_JOY_ADC_Y, JOY_Y_PIN, JOY_Y)
#if HAS_TEMP_ADC_1 _TCASE(HAS_JOY_ADC_Z, JOY_Z_PIN, JOY_Z)
case TEMP_1_PIN: pin_index = TEMP_1; break; _TCASE(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN, FILWIDTH)
#endif _TCASE(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN, ADC_KEY)
#if HAS_TEMP_ADC_2 _TCASE(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN, POWERMON_CURRENT)
case TEMP_2_PIN: pin_index = TEMP_2; break; _TCASE(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN, POWERMON_VOLTS)
#endif
#if HAS_TEMP_ADC_3
case TEMP_3_PIN: pin_index = TEMP_3; break;
#endif
#if HAS_TEMP_ADC_4
case TEMP_4_PIN: pin_index = TEMP_4; break;
#endif
#if HAS_TEMP_ADC_5
case TEMP_5_PIN: pin_index = TEMP_5; break;
#endif
#if HAS_TEMP_ADC_6
case TEMP_6_PIN: pin_index = TEMP_6; break;
#endif
#if HAS_TEMP_ADC_7
case TEMP_7_PIN: pin_index = TEMP_7; break;
#endif
#if HAS_JOY_ADC_X
case JOY_X_PIN: pin_index = JOY_X; break;
#endif
#if HAS_JOY_ADC_Y
case JOY_Y_PIN: pin_index = JOY_Y; break;
#endif
#if HAS_JOY_ADC_Z
case JOY_Z_PIN: pin_index = JOY_Z; break;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case FILWIDTH_PIN: pin_index = FILWIDTH; break;
#endif
#if HAS_ADC_BUTTONS
case ADC_KEYPAD_PIN: pin_index = ADC_KEY; break;
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
case POWER_MONITOR_CURRENT_PIN: pin_index = POWERMON_CURRENT; break;
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
case POWER_MONITOR_VOLTAGE_PIN: pin_index = POWERMON_VOLTS; break;
#endif
} }
HAL_adc_result = HAL_adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits HAL_adc_result = HAL_adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits
} }

2
Marlin/src/core/macros.h
View File

@ -235,6 +235,8 @@
#define __TERN(T,V...) ___TERN(_CAT(_NO,T),V) // Prepend '_NO' to get '_NOT_0' or '_NOT_1' #define __TERN(T,V...) ___TERN(_CAT(_NO,T),V) // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
#define ___TERN(P,V...) THIRD(P,V) // If first argument has a comma, A. Else B. #define ___TERN(P,V...) THIRD(P,V) // If first argument has a comma, A. Else B.
#define _OPTITEM(A...) A,
#define OPTITEM(O,A...) TERN_(O,DEFER4(_OPTITEM)(A))
#define _OPTARG(A...) , A #define _OPTARG(A...) , A
#define OPTARG(O,A...) TERN_(O,DEFER4(_OPTARG)(A)) #define OPTARG(O,A...) TERN_(O,DEFER4(_OPTARG)(A))
#define _OPTCODE(A) A; #define _OPTCODE(A) A;

6
Marlin/src/inc/Conditionals_adv.h
View File

@ -118,9 +118,9 @@
// Temperature sensor IDs // Temperature sensor IDs
#define HID_REDUNDANT -6 #define HID_REDUNDANT -6
#define HID_COOLER -5 #define HID_BOARD -5
#define HID_PROBE -4 #define HID_COOLER -4
#define HID_BOARD -3 #define HID_PROBE -3
#define HID_CHAMBER -2 #define HID_CHAMBER -2
#define HID_BED -1 #define HID_BED -1
#define HID_E0 0 #define HID_E0 0

14
Marlin/src/inc/Conditionals_post.h
View File

@ -507,7 +507,13 @@
#ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF #ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10
#endif #endif
#if REDUNDANT_TEMP_MATCH(SOURCE, COOLER) #if REDUNDANT_TEMP_MATCH(SOURCE, BOARD)
#if !PIN_EXISTS(TEMP_BOARD)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to BOARD requires TEMP_BOARD_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_BOARD_PIN
#endif
#elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER)
#if !PIN_EXISTS(TEMP_COOLER) #if !PIN_EXISTS(TEMP_COOLER)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN." #error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN."
#else #else
@ -2446,12 +2452,12 @@
#if HAS_TEMP(BED) #if HAS_TEMP(BED)
#define HAS_TEMP_BED 1 #define HAS_TEMP_BED 1
#endif #endif
#if HAS_TEMP(PROBE)
#define HAS_TEMP_PROBE 1
#endif
#if HAS_TEMP(CHAMBER) #if HAS_TEMP(CHAMBER)
#define HAS_TEMP_CHAMBER 1 #define HAS_TEMP_CHAMBER 1
#endif #endif
#if HAS_TEMP(PROBE)
#define HAS_TEMP_PROBE 1
#endif
#if HAS_TEMP(COOLER) #if HAS_TEMP(COOLER)
#define HAS_TEMP_COOLER 1 #define HAS_TEMP_COOLER 1
#endif #endif

12
Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
View File

@ -222,12 +222,12 @@ const uint16_t VPList_SDPrintTune[] PROGMEM = {
}; };
const uint16_t VPList_StepPerMM[] PROGMEM = { const uint16_t VPList_StepPerMM[] PROGMEM = {
VP_X_STEP_PER_MM VP_X_STEP_PER_MM,
, VP_Y_STEP_PER_MM VP_Y_STEP_PER_MM,
, VP_Z_STEP_PER_MM VP_Z_STEP_PER_MM,
OPTARG(HAS_HOTEND, VP_E0_STEP_PER_MM) OPTITEM(HAS_HOTEND, VP_E0_STEP_PER_MM)
OPTARG(HAS_MULTI_HOTEND, VP_E1_STEP_PER_MM) OPTITEM(HAS_MULTI_HOTEND, VP_E1_STEP_PER_MM)
, 0x0000 0x0000
}; };
const uint16_t VPList_PIDE0[] PROGMEM = { const uint16_t VPList_PIDE0[] PROGMEM = {

8
Marlin/src/module/temperature.cpp
View File

@ -2361,12 +2361,12 @@ void Temperature::init() {
#if HAS_TEMP_ADC_CHAMBER #if HAS_TEMP_ADC_CHAMBER
HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN); HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN);
#endif #endif
#if HAS_TEMP_ADC_COOLER
HAL_ANALOG_SELECT(TEMP_COOLER_PIN);
#endif
#if HAS_TEMP_ADC_PROBE #if HAS_TEMP_ADC_PROBE
HAL_ANALOG_SELECT(TEMP_PROBE_PIN); HAL_ANALOG_SELECT(TEMP_PROBE_PIN);
#endif #endif
#if HAS_TEMP_ADC_COOLER
HAL_ANALOG_SELECT(TEMP_COOLER_PIN);
#endif
#if HAS_TEMP_ADC_BOARD #if HAS_TEMP_ADC_BOARD
HAL_ANALOG_SELECT(TEMP_BOARD_PIN); HAL_ANALOG_SELECT(TEMP_BOARD_PIN);
#endif #endif
@ -2948,8 +2948,8 @@ void Temperature::update_raw_temperatures() {
TERN_(HAS_TEMP_ADC_BED, temp_bed.update()); TERN_(HAS_TEMP_ADC_BED, temp_bed.update());
TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update()); TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update());
TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update()); TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update());
TERN_(HAS_TEMP_ADC_BOARD, temp_board.update());
TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update()); TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update());
TERN_(HAS_TEMP_ADC_BOARD, temp_board.update());
TERN_(HAS_JOY_ADC_X, joystick.x.update()); TERN_(HAS_JOY_ADC_X, joystick.x.update());
TERN_(HAS_JOY_ADC_Y, joystick.y.update()); TERN_(HAS_JOY_ADC_Y, joystick.y.update());

22
Marlin/src/module/temperature.h
View File

@ -231,9 +231,6 @@ struct PIDHeaterInfo : public HeaterInfo {
typedef heater_info_t bed_info_t; typedef heater_info_t bed_info_t;
#endif #endif
#endif #endif
#if HAS_TEMP_PROBE
typedef temp_info_t probe_info_t;
#endif
#if HAS_HEATED_CHAMBER #if HAS_HEATED_CHAMBER
#if ENABLED(PIDTEMPCHAMBER) #if ENABLED(PIDTEMPCHAMBER)
typedef struct PIDHeaterInfo<PID_t> chamber_info_t; typedef struct PIDHeaterInfo<PID_t> chamber_info_t;
@ -243,12 +240,15 @@ struct PIDHeaterInfo : public HeaterInfo {
#elif HAS_TEMP_CHAMBER #elif HAS_TEMP_CHAMBER
typedef temp_info_t chamber_info_t; typedef temp_info_t chamber_info_t;
#endif #endif
#if HAS_TEMP_BOARD #if HAS_TEMP_PROBE
typedef temp_info_t board_info_t; typedef temp_info_t probe_info_t;
#endif #endif
#if EITHER(HAS_COOLER, HAS_TEMP_COOLER) #if EITHER(HAS_COOLER, HAS_TEMP_COOLER)
typedef heater_info_t cooler_info_t; typedef heater_info_t cooler_info_t;
#endif #endif
#if HAS_TEMP_BOARD
typedef temp_info_t board_info_t;
#endif
// Heater watch handling // Heater watch handling
template <int INCREASE, int HYSTERESIS, millis_t PERIOD> template <int INCREASE, int HYSTERESIS, millis_t PERIOD>
@ -318,12 +318,12 @@ typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_ra
#if TEMP_SENSOR_BED_IS_CUSTOM #if TEMP_SENSOR_BED_IS_CUSTOM
CTI_BED, CTI_BED,
#endif #endif
#if TEMP_SENSOR_PROBE_IS_CUSTOM
CTI_PROBE,
#endif
#if TEMP_SENSOR_CHAMBER_IS_CUSTOM #if TEMP_SENSOR_CHAMBER_IS_CUSTOM
CTI_CHAMBER, CTI_CHAMBER,
#endif #endif
#if TEMP_SENSOR_PROBE_IS_CUSTOM
CTI_PROBE,
#endif
#if TEMP_SENSOR_COOLER_IS_CUSTOM #if TEMP_SENSOR_COOLER_IS_CUSTOM
CTI_COOLER, CTI_COOLER,
#endif #endif
@ -599,12 +599,12 @@ class Temperature {
#if HAS_HEATED_BED #if HAS_HEATED_BED
static celsius_float_t analog_to_celsius_bed(const int16_t raw); static celsius_float_t analog_to_celsius_bed(const int16_t raw);
#endif #endif
#if HAS_TEMP_PROBE
static celsius_float_t analog_to_celsius_probe(const int16_t raw);
#endif
#if HAS_TEMP_CHAMBER #if HAS_TEMP_CHAMBER
static celsius_float_t analog_to_celsius_chamber(const int16_t raw); static celsius_float_t analog_to_celsius_chamber(const int16_t raw);
#endif #endif
#if HAS_TEMP_PROBE
static celsius_float_t analog_to_celsius_probe(const int16_t raw);
#endif
#if HAS_TEMP_COOLER #if HAS_TEMP_COOLER
static celsius_float_t analog_to_celsius_cooler(const int16_t raw); static celsius_float_t analog_to_celsius_cooler(const int16_t raw);
#endif #endif

16
Marlin/src/module/thermistor/thermistors.h
View File

@ -283,13 +283,6 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t;
#define TEMPTABLE_CHAMBER_LEN 0 #define TEMPTABLE_CHAMBER_LEN 0
#endif #endif
#if TEMP_SENSOR_COOLER > 0
#define TEMPTABLE_COOLER TT_NAME(TEMP_SENSOR_COOLER)
#define TEMPTABLE_COOLER_LEN COUNT(TEMPTABLE_COOLER)
#else
#define TEMPTABLE_COOLER_LEN 0
#endif
#if TEMP_SENSOR_PROBE > 0 #if TEMP_SENSOR_PROBE > 0
#define TEMPTABLE_PROBE TT_NAME(TEMP_SENSOR_PROBE) #define TEMPTABLE_PROBE TT_NAME(TEMP_SENSOR_PROBE)
#define TEMPTABLE_PROBE_LEN COUNT(TEMPTABLE_PROBE) #define TEMPTABLE_PROBE_LEN COUNT(TEMPTABLE_PROBE)
@ -297,6 +290,13 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t;
#define TEMPTABLE_PROBE_LEN 0 #define TEMPTABLE_PROBE_LEN 0
#endif #endif
#if TEMP_SENSOR_COOLER > 0
#define TEMPTABLE_COOLER TT_NAME(TEMP_SENSOR_COOLER)
#define TEMPTABLE_COOLER_LEN COUNT(TEMPTABLE_COOLER)
#else
#define TEMPTABLE_COOLER_LEN 0
#endif
#if TEMP_SENSOR_BOARD > 0 #if TEMP_SENSOR_BOARD > 0
#define TEMPTABLE_BOARD TT_NAME(TEMP_SENSOR_BOARD) #define TEMPTABLE_BOARD TT_NAME(TEMP_SENSOR_BOARD)
#define TEMPTABLE_BOARD_LEN COUNT(TEMPTABLE_BOARD) #define TEMPTABLE_BOARD_LEN COUNT(TEMPTABLE_BOARD)
@ -316,8 +316,8 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_
|| 255 > TEMPTABLE_4_LEN || 255 > TEMPTABLE_5_LEN || 255 > TEMPTABLE_6_LEN || 255 > TEMPTABLE_7_LEN || 255 > TEMPTABLE_4_LEN || 255 > TEMPTABLE_5_LEN || 255 > TEMPTABLE_6_LEN || 255 > TEMPTABLE_7_LEN
|| 255 > TEMPTABLE_BED_LEN || 255 > TEMPTABLE_BED_LEN
|| 255 > TEMPTABLE_CHAMBER_LEN || 255 > TEMPTABLE_CHAMBER_LEN
|| 255 > TEMPTABLE_COOLER_LEN
|| 255 > TEMPTABLE_PROBE_LEN || 255 > TEMPTABLE_PROBE_LEN
|| 255 > TEMPTABLE_COOLER_LEN
|| 255 > TEMPTABLE_BOARD_LEN || 255 > TEMPTABLE_BOARD_LEN
|| 255 > TEMPTABLE_REDUNDANT_LEN || 255 > TEMPTABLE_REDUNDANT_LEN
, "Temperature conversion tables over 255 entries need special consideration." , "Temperature conversion tables over 255 entries need special consideration."

16
Marlin/src/pins/pinsDebug_list.h
View File

@ -141,24 +141,24 @@
REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN)
#endif #endif
#endif #endif
#if PIN_EXISTS(TEMP_BOARD)
#if ANALOG_OK(TEMP_BOARD_PIN)
REPORT_NAME_ANALOG(__LINE__, TEMP_BOARD_PIN)
#endif
#endif
#if PIN_EXISTS(TEMP_CHAMBER) #if PIN_EXISTS(TEMP_CHAMBER)
#if ANALOG_OK(TEMP_CHAMBER_PIN) #if ANALOG_OK(TEMP_CHAMBER_PIN)
REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN) REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN)
#endif #endif
#endif #endif
#if PIN_EXISTS(TEMP_PROBE)
#if ANALOG_OK(TEMP_PROBE_PIN)
REPORT_NAME_ANALOG(__LINE__, TEMP_PROBE_PIN)
#endif
#endif
#if PIN_EXISTS(TEMP_COOLER) #if PIN_EXISTS(TEMP_COOLER)
#if ANALOG_OK(TEMP_COOLER_PIN) #if ANALOG_OK(TEMP_COOLER_PIN)
REPORT_NAME_ANALOG(__LINE__, TEMP_COOLER_PIN) REPORT_NAME_ANALOG(__LINE__, TEMP_COOLER_PIN)
#endif #endif
#endif #endif
#if PIN_EXISTS(TEMP_PROBE) #if PIN_EXISTS(TEMP_BOARD)
#if ANALOG_OK(TEMP_PROBE_PIN) #if ANALOG_OK(TEMP_BOARD_PIN)
REPORT_NAME_ANALOG(__LINE__, TEMP_PROBE_PIN) REPORT_NAME_ANALOG(__LINE__, TEMP_BOARD_PIN)
#endif #endif
#endif #endif
#if PIN_EXISTS(ADC_KEYPAD) #if PIN_EXISTS(ADC_KEYPAD)