change to better (more clear) names (#8050)

set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
This commit is contained in:
Roxy-3D 2017-10-21 11:42:26 -05:00 committed by GitHub
parent adf168e68f
commit 72156a2029
17 changed files with 49 additions and 49 deletions

View File

@ -502,7 +502,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
if (delayed_move_time && ELAPSED(ms, delayed_move_time + 1000UL) && IsRunning()) {
// travel moves have been received so enact them
delayed_move_time = 0xFFFFFFFFUL; // force moves to be done
set_destination_to_current();
set_destination_from_current();
prepare_move_to_destination();
}
#endif

View File

@ -378,7 +378,7 @@ float bilinear_z_offset(const float logical[XYZ]) {
if (cx1 == cx2 && cy1 == cy2) {
// Start and end on same mesh square
line_to_destination(fr_mm_s);
set_current_to_destination();
set_current_from_destination();
return;
}
@ -405,7 +405,7 @@ float bilinear_z_offset(const float logical[XYZ]) {
else {
// Already split on a border
line_to_destination(fr_mm_s);
set_current_to_destination();
set_current_from_destination();
return;
}

View File

@ -69,7 +69,7 @@
if (cx1 == cx2 && cy1 == cy2) {
// Start and end on same mesh square
line_to_destination(fr_mm_s);
set_current_to_destination();
set_current_from_destination();
return;
}
@ -96,7 +96,7 @@
else {
// Already split on a border
line_to_destination(fr_mm_s);
set_current_to_destination();
set_current_from_destination();
return;
}

View File

@ -222,7 +222,7 @@ void unified_bed_leveling::G26() {
if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
stepper.synchronize();
set_current_to_destination();
set_current_from_destination();
}
if (turn_on_heaters()) goto LEAVE;
@ -247,7 +247,7 @@ void unified_bed_leveling::G26() {
ZERO(vertical_mesh_line_flags);
// Move nozzle to the specified height for the first layer
set_destination_to_current();
set_destination_from_current();
destination[Z_AXIS] = g26_layer_height;
move_to(destination, 0.0);
move_to(destination, g26_ooze_amount);
@ -531,7 +531,7 @@ void unified_bed_leveling::move_to(const float &x, const float &y, const float &
G26_line_to_destination(feed_value);
stepper.synchronize();
set_destination_to_current();
set_destination_from_current();
}
// Check if X or Y is involved in the movement.
@ -547,7 +547,7 @@ void unified_bed_leveling::move_to(const float &x, const float &y, const float &
G26_line_to_destination(feed_value);
stepper.synchronize();
set_destination_to_current();
set_destination_from_current();
}
@ -829,7 +829,7 @@ bool unified_bed_leveling::prime_nozzle() {
lcd_setstatusPGM(PSTR("User-Controlled Prime"), 99);
chirp_at_user();
set_destination_to_current();
set_destination_from_current();
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
@ -846,7 +846,7 @@ bool unified_bed_leveling::prime_nozzle() {
// but because the planner has a buffer, we won't be able
// to stop as quickly. So we put up with the less smooth
// action to give the user a more responsive 'Stop'.
set_destination_to_current();
set_destination_from_current();
idle();
}
@ -870,11 +870,11 @@ bool unified_bed_leveling::prime_nozzle() {
lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99);
lcd_quick_feedback();
#endif
set_destination_to_current();
set_destination_from_current();
destination[E_AXIS] += g26_prime_length;
G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
stepper.synchronize();
set_destination_to_current();
set_destination_from_current();
retract_filament(destination);
}

View File

@ -39,9 +39,9 @@
extern float destination[XYZE];
#if AVR_AT90USB1286_FAMILY // Teensyduino & Printrboard IDE extensions have compile errors without this
inline void set_current_to_destination() { COPY(current_position, destination); }
inline void set_current_from_destination() { COPY(current_position, destination); }
#else
extern void set_current_to_destination();
extern void set_current_from_destination();
#endif
static void debug_echo_axis(const AxisEnum axis) {
@ -141,7 +141,7 @@
// a reasonable correction would be.
planner._buffer_line(end[X_AXIS], end[Y_AXIS], end[Z_AXIS], end[E_AXIS], feed_rate, extruder);
set_current_to_destination();
set_current_from_destination();
if (g26_debug_flag)
debug_current_and_destination(PSTR("out of bounds in ubl.line_to_destination()"));
@ -189,7 +189,7 @@
if (g26_debug_flag)
debug_current_and_destination(PSTR("FINAL_MOVE in ubl.line_to_destination()"));
set_current_to_destination();
set_current_from_destination();
return;
}
@ -301,7 +301,7 @@
if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS])
goto FINAL_MOVE;
set_current_to_destination();
set_current_from_destination();
return;
}
@ -362,7 +362,7 @@
if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS])
goto FINAL_MOVE;
set_current_to_destination();
set_current_from_destination();
return;
}
@ -456,7 +456,7 @@
if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS])
goto FINAL_MOVE;
set_current_to_destination();
set_current_from_destination();
}
#if UBL_DELTA
@ -598,7 +598,7 @@
} while (segments);
return false; // moved but did not set_current_to_destination();
return false; // moved but did not set_current_from_destination();
}
// Otherwise perform per-segment leveling
@ -681,7 +681,7 @@
ubl_buffer_segment_raw( seg_rx, seg_ry, seg_rz + z_cxcy, seg_le, feedrate );
if (segments == 0 ) // done with last segment
return false; // did not set_current_to_destination()
return false; // did not set_current_from_destination()
seg_rx += seg_dx;
seg_ry += seg_dy;

View File

@ -129,7 +129,7 @@ void FWRetract::retract(const bool retracting
planner.flow_percentage[active_extruder] = 100;
// The current position will be the destination for E and Z moves
set_destination_to_current();
set_destination_from_current();
stepper.synchronize(); // Wait for buffered moves to complete

View File

@ -146,7 +146,7 @@ bool pause_print(const float &retract, const float &z_lift, const float &x_pos,
if (retract) {
// Initial retract before move to filament change position
set_destination_to_current();
set_destination_from_current();
destination[E_AXIS] += retract;
RUNPLAN(PAUSE_PARK_RETRACT_FEEDRATE);
stepper.synchronize();
@ -168,7 +168,7 @@ bool pause_print(const float &retract, const float &z_lift, const float &x_pos,
}
// Unload filament
set_destination_to_current();
set_destination_from_current();
destination[E_AXIS] += unload_length;
RUNPLAN(FILAMENT_CHANGE_UNLOAD_FEEDRATE);
stepper.synchronize();
@ -272,7 +272,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
filament_change_beep(max_beep_count, true);
#endif
set_destination_to_current();
set_destination_from_current();
if (load_length != 0) {
#if ENABLED(ULTIPANEL)

View File

@ -55,7 +55,7 @@ void GcodeSuite::G42() {
#define _GET_MESH_Y(J) mbl.index_to_ypos[J]
#endif
set_destination_to_current();
set_destination_from_current();
if (hasI) destination[X_AXIS] = LOGICAL_X_POSITION(_GET_MESH_X(ix));
if (hasJ) destination[Y_AXIS] = LOGICAL_Y_POSITION(_GET_MESH_Y(iy));
if (parser.boolval('P')) {

View File

@ -47,7 +47,7 @@ void mesh_probing_done() {
set_bed_leveling_enabled(true);
#if ENABLED(MESH_G28_REST_ORIGIN)
current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS);
set_destination_to_current();
set_destination_from_current();
line_to_destination(homing_feedrate(Z_AXIS));
stepper.synchronize();
#endif

View File

@ -194,7 +194,7 @@ void GcodeSuite::G28(const bool always_home_all) {
homeZ = always_home_all || parser.seen('Z'),
home_all = (!homeX && !homeY && !homeZ) || (homeX && homeY && homeZ);
set_destination_to_current();
set_destination_from_current();
#if Z_HOME_DIR > 0 // If homing away from BED do Z first

View File

@ -181,7 +181,7 @@ void plan_arc(
// As far as the parser is concerned, the position is now == target. In reality the
// motion control system might still be processing the action and the real tool position
// in any intermediate location.
set_current_to_destination();
set_current_from_destination();
} // plan_arc
/**

View File

@ -33,7 +33,7 @@ void plan_cubic_move(const float offset[4]) {
// As far as the parser is concerned, the position is now == destination. In reality the
// motion control system might still be processing the action and the real tool position
// in any intermediate location.
set_current_to_destination();
set_current_from_destination();
}
/**

View File

@ -64,7 +64,7 @@ static bool G38_run_probe() {
#if ENABLED(PROBE_DOUBLE_TOUCH)
// Move away by the retract distance
set_destination_to_current();
set_destination_from_current();
LOOP_XYZ(i) destination[i] += retract_mm[i];
endstops.enable(false);
prepare_move_to_destination();

View File

@ -2810,7 +2810,7 @@ void kill_screen(const char* lcd_msg) {
#endif
// Set movement on a single axis
set_destination_to_current();
set_destination_from_current();
destination[manual_move_axis] += manual_move_offset;
// Reset for the next move
@ -2819,7 +2819,7 @@ void kill_screen(const char* lcd_msg) {
// Set a blocking flag so no new moves can be added until all segments are done
processing_manual_move = true;
prepare_move_to_destination(); // will call set_current_to_destination
prepare_move_to_destination(); // will call set_current_from_destination()
processing_manual_move = false;
feedrate_mm_s = old_feedrate;

View File

@ -82,7 +82,7 @@ float current_position[XYZE] = { 0.0 };
/**
* Cartesian Destination
* A temporary position, usually applied to 'current_position'.
* Set with 'get_destination_from_command' or 'set_destination_to_current'.
* Set with 'get_destination_from_command' or 'set_destination_from_current'.
* 'line_to_destination' sets 'current_position' to 'destination'.
*/
float destination[XYZE] = { 0.0 };
@ -279,7 +279,7 @@ void line_to_destination(const float fr_mm_s) {
planner.buffer_line_kinematic(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder);
#endif
set_current_to_destination();
set_current_from_destination();
}
#endif // IS_KINEMATIC
@ -301,10 +301,10 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
feedrate_mm_s = fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
set_destination_to_current(); // sync destination at the start
set_destination_from_current(); // sync destination at the start
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("set_destination_to_current", destination);
if (DEBUGGING(LEVELING)) DEBUG_POS("set_destination_from_current", destination);
#endif
// when in the danger zone
@ -313,7 +313,7 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
destination[X_AXIS] = lx; // move directly (uninterpolated)
destination[Y_AXIS] = ly;
destination[Z_AXIS] = lz;
prepare_uninterpolated_move_to_destination(); // set_current_to_destination
prepare_uninterpolated_move_to_destination(); // set_current_from_destination()
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("danger zone move", current_position);
#endif
@ -321,7 +321,7 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
}
else {
destination[Z_AXIS] = delta_clip_start_height;
prepare_uninterpolated_move_to_destination(); // set_current_to_destination
prepare_uninterpolated_move_to_destination(); // set_current_from_destination()
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("zone border move", current_position);
#endif
@ -330,7 +330,7 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
if (lz > current_position[Z_AXIS]) { // raising?
destination[Z_AXIS] = lz;
prepare_uninterpolated_move_to_destination(); // set_current_to_destination
prepare_uninterpolated_move_to_destination(); // set_current_from_destination()
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("z raise move", current_position);
#endif
@ -338,14 +338,14 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
destination[X_AXIS] = lx;
destination[Y_AXIS] = ly;
prepare_move_to_destination(); // set_current_to_destination
prepare_move_to_destination(); // set_current_from_destination()
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("xy move", current_position);
#endif
if (lz < current_position[Z_AXIS]) { // lowering?
destination[Z_AXIS] = lz;
prepare_uninterpolated_move_to_destination(); // set_current_to_destination
prepare_uninterpolated_move_to_destination(); // set_current_from_destination()
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("z lower move", current_position);
#endif
@ -355,7 +355,7 @@ void do_blocking_move_to(const float &lx, const float &ly, const float &lz, cons
if (!position_is_reachable_xy(lx, ly)) return;
set_destination_to_current();
set_destination_from_current();
// If Z needs to raise, do it before moving XY
if (destination[Z_AXIS] < lz) {
@ -701,7 +701,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
// Skip it, but keep track of the current position
// (so it can be used as the start of the next non-travel move)
if (delayed_move_time != 0xFFFFFFFFUL) {
set_current_to_destination();
set_current_from_destination();
NOLESS(raised_parked_position[Z_AXIS], destination[Z_AXIS]);
delayed_move_time = millis();
return true;
@ -807,7 +807,7 @@ void prepare_move_to_destination() {
#endif
) return;
set_current_to_destination();
set_current_from_destination();
}
#if HAS_AXIS_UNHOMED_ERR

View File

@ -106,8 +106,8 @@ XYZ_DEFS(signed char, home_dir, HOME_DIR);
void report_current_position();
inline void set_current_to_destination() { COPY(current_position, destination); }
inline void set_destination_to_current() { COPY(destination, current_position); }
inline void set_current_from_destination() { COPY(current_position, destination); }
inline void set_destination_from_current() { COPY(destination, current_position); }
void get_cartesian_from_steppers();
void set_current_from_steppers_for_axis(const AxisEnum axis);

View File

@ -176,7 +176,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
}
// Save current position to destination, for use later
set_destination_to_current();
set_destination_from_current();
#if ENABLED(DUAL_X_CARRIAGE)