Merge pull request #12286 from thinkyhead/bf2_menu_bed_corners

Fix LEVEL_BED_CORNERS menu not found
This commit is contained in:
Scott Lahteine 2018-10-31 18:06:25 -05:00 committed by GitHub
commit 724c2ed9b4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 133 additions and 103 deletions

View File

@ -160,17 +160,6 @@
bool Running = true;
/**
* axis_homed
* Flags that each linear axis was homed.
* XYZ on cartesian, ABC on delta, ABZ on SCARA.
*
* axis_known_position
* Flags that the position is known in each linear axis. Set when homed.
* Cleared whenever a stepper powers off, potentially losing its position.
*/
uint8_t axis_homed, axis_known_position; // = 0
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
TempUnit input_temp_units = TEMPUNIT_C;
#endif

View File

@ -189,12 +189,6 @@ extern bool Running;
inline bool IsRunning() { return Running; }
inline bool IsStopped() { return !Running; }
extern uint8_t axis_homed, axis_known_position;
constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
extern volatile bool wait_for_heatup;
#if HAS_RESUME_CONTINUE

View File

@ -28,7 +28,6 @@
#include "../../module/motion.h"
#include "../../lcd/ultralcd.h"
#include "../../libs/buzzer.h"
#include "../../Marlin.h" // for axis_homed
/**
* M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y

View File

@ -41,7 +41,7 @@
* location: <http://www.gnu.org/licenses/>. *
****************************************************************************/
#include "../../Marlin.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EXTENSIBLE_UI)
@ -109,7 +109,7 @@ namespace UI {
// Machine was killed, reinit SysTick so we are able to compute time without ISRs
if (currTimeHI == 0) {
// Get the last time the Arduino time computed (from CMSIS) and convert it to SysTick
currTimeHI = (uint32_t)((GetTickCount() * (uint64_t)(F_CPU/8000)) >> 24);
currTimeHI = (uint32_t)((GetTickCount() * (uint64_t)(F_CPU / 8000)) >> 24);
// Reinit the SysTick timer to maximize its period
SysTick->LOAD = SysTick_LOAD_RELOAD_Msk; // get the full range for the systick timer
@ -136,7 +136,7 @@ namespace UI {
#else
// TODO: Implement for AVR
uint32_t safe_millis() { return millis(); }
FORCE_INLINE uint32_t safe_millis() { return millis(); }
#endif
@ -399,6 +399,7 @@ namespace UI {
#endif
#if ENABLED(JUNCTION_DEVIATION)
float getJunctionDeviation_mm() {
return planner.junction_deviation_mm;
}
@ -407,13 +408,15 @@ namespace UI {
planner.junction_deviation_mm = clamp(value, 0.01, 0.3);
planner.recalculate_max_e_jerk();
}
#else
float getAxisMaxJerk_mm_s(const axis_t axis) {
return planner.max_jerk[axis];
return planner.max_jerk[axis];
}
float getAxisMaxJerk_mm_s(const extruder_t extruder) {
return planner.max_jerk[E_AXIS];
return planner.max_jerk[E_AXIS];
}
void setAxisMaxJerk_mm_s(const float value, const axis_t axis) {

View File

@ -0,0 +1,102 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Level Bed Corners menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU && ENABLED(LEVEL_BED_CORNERS)
#include "menu.h"
#include "../../module/motion.h"
#include "../../module/planner.h"
/**
* Level corners, starting in the front-left corner.
*/
static int8_t bed_corner;
void _lcd_goto_next_corner() {
line_to_z(4.0);
switch (bed_corner) {
case 0:
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET;
break;
case 1:
current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET;
break;
case 2:
current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET;
break;
case 3:
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
break;
#if ENABLED(LEVEL_CENTER_TOO)
case 4:
current_position[X_AXIS] = X_CENTER;
current_position[Y_AXIS] = Y_CENTER;
break;
#endif
}
planner.buffer_line(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder);
line_to_z(0.0);
if (++bed_corner > 3
#if ENABLED(LEVEL_CENTER_TOO)
+ 1
#endif
) bed_corner = 0;
}
void menu_level_bed_corners() {
START_MENU();
MENU_ITEM(function,
#if ENABLED(LEVEL_CENTER_TOO)
MSG_LEVEL_BED_NEXT_POINT
#else
MSG_NEXT_CORNER
#endif
, _lcd_goto_next_corner);
MENU_ITEM(function, MSG_BACK, lcd_goto_previous_menu_no_defer);
END_MENU();
}
void _lcd_level_bed_corners_homing() {
_lcd_draw_homing();
if (all_axes_homed()) {
bed_corner = 0;
lcd_goto_screen(menu_level_bed_corners);
_lcd_goto_next_corner();
}
}
void _lcd_level_bed_corners() {
defer_return_to_status = true;
if (!all_axes_known()) {
set_all_unhomed();
enqueue_and_echo_commands_P(PSTR("G28"));
}
lcd_goto_screen(_lcd_level_bed_corners_homing);
}
#endif // HAS_LCD_MENU && LEVEL_BED_CORNERS

View File

@ -188,84 +188,13 @@
//
void _lcd_level_bed_continue() {
defer_return_to_status = true;
axis_homed = 0;
set_all_unhomed();
lcd_goto_screen(_lcd_level_bed_homing);
enqueue_and_echo_commands_P(PSTR("G28"));
}
#endif // PROBE_MANUALLY || MESH_BED_LEVELING
#if ENABLED(LEVEL_BED_CORNERS)
/**
* Level corners, starting in the front-left corner.
*/
static int8_t bed_corner;
void _lcd_goto_next_corner() {
line_to_z(4.0);
switch (bed_corner) {
case 0:
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET;
break;
case 1:
current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET;
break;
case 2:
current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET;
break;
case 3:
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
break;
#if ENABLED(LEVEL_CENTER_TOO)
case 4:
current_position[X_AXIS] = X_CENTER;
current_position[Y_AXIS] = Y_CENTER;
break;
#endif
}
planner.buffer_line(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder);
line_to_z(0.0);
if (++bed_corner > 3
#if ENABLED(LEVEL_CENTER_TOO)
+ 1
#endif
) bed_corner = 0;
}
void _lcd_corner_submenu() {
START_MENU();
MENU_ITEM(function,
#if ENABLED(LEVEL_CENTER_TOO)
MSG_LEVEL_BED_NEXT_POINT
#else
MSG_NEXT_CORNER
#endif
, _lcd_goto_next_corner);
MENU_ITEM(function, MSG_BACK, lcd_goto_previous_menu_no_defer);
END_MENU();
}
void _lcd_level_bed_corners_homing() {
_lcd_draw_homing();
if (all_axes_homed()) {
bed_corner = 0;
lcd_goto_screen(_lcd_corner_submenu);
_lcd_goto_next_corner();
}
}
void _lcd_level_bed_corners() {
defer_return_to_status = true;
if (!all_axes_known()) {
axis_homed = 0;
enqueue_and_echo_commands_P(PSTR("G28"));
}
lcd_goto_screen(_lcd_level_bed_corners_homing);
}
#endif // LEVEL_BED_CORNERS
/**
* Step 1: Bed Level entry-point
*
@ -325,7 +254,6 @@ void menu_bed_leveling() {
#endif
#if ENABLED(LEVEL_BED_CORNERS)
// Move to the next corner for leveling
MENU_ITEM(submenu, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
#endif

View File

@ -502,7 +502,7 @@ void _lcd_ubl_output_map_lcd() {
*/
void _lcd_ubl_output_map_lcd_cmd() {
if (!all_axes_known()) {
axis_homed = 0;
set_all_unhomed();
enqueue_and_echo_commands_P(PSTR("G28"));
}
lcd_goto_screen(_lcd_ubl_map_homing);

View File

@ -73,7 +73,7 @@ void recalc_delta_settings() {
delta_diagonal_rod_2_tower[B_AXIS] = sq(delta_diagonal_rod + drt[B_AXIS]);
delta_diagonal_rod_2_tower[C_AXIS] = sq(delta_diagonal_rod + drt[C_AXIS]);
update_software_endstops(Z_AXIS);
axis_homed = 0;
set_all_unhomed();
}
/**

View File

@ -68,6 +68,17 @@ XYZ_CONSTS(float, max_length, MAX_LENGTH);
XYZ_CONSTS(float, home_bump_mm, HOME_BUMP_MM);
XYZ_CONSTS(signed char, home_dir, HOME_DIR);
/**
* axis_homed
* Flags that each linear axis was homed.
* XYZ on cartesian, ABC on delta, ABZ on SCARA.
*
* axis_known_position
* Flags that the position is known in each linear axis. Set when homed.
* Cleared whenever a stepper powers off, potentially losing its position.
*/
uint8_t axis_homed, axis_known_position; // = 0
// Relative Mode. Enable with G91, disable with G90.
bool relative_mode; // = false;

View File

@ -26,9 +26,7 @@
* High-level motion commands to feed the planner
* Some of these methods may migrate to the planner class.
*/
#ifndef MOTION_H
#define MOTION_H
#pragma once
#include "../inc/MarlinConfig.h"
@ -36,6 +34,14 @@
#include "../module/scara.h"
#endif
// Axis homed and known-position states
extern uint8_t axis_homed, axis_known_position;
constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
FORCE_INLINE void set_all_unhomed() { axis_homed = 0; }
FORCE_INLINE void set_all_unknown() { axis_known_position = 0; }
// Error margin to work around float imprecision
constexpr float slop = 0.0001;
@ -359,5 +365,3 @@ void homeaxis(const AxisEnum axis);
#if HAS_M206_COMMAND
void set_home_offset(const AxisEnum axis, const float v);
#endif
#endif // MOTION_H