MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Merge pull request #4169 from thinkyhead/rc_wait_but_break

Browse Source 
Allow wait-for-cooling, break at threshold or if cooling stalls
This commit is contained in:
Scott Lahteine 2016-06-30 16:13:51 -07:00 committed by GitHub
commit 725fde8b26
1 changed files with 34 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
Marlin/Marlin_main.cpp
View File

@ -4550,7 +4550,7 @@ inline void gcode_M109() {
else print_job_timer.start(); else print_job_timer.start();
#endif #endif
if (temp > thermalManager.degHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING); if (thermalManager.isHeatingHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
} }
#if ENABLED(AUTOTEMP) #if ENABLED(AUTOTEMP)
@ -4566,10 +4566,10 @@ inline void gcode_M109() {
#define TEMP_CONDITIONS (wants_to_cool ? thermalManager.isCoolingHotend(target_extruder) : thermalManager.isHeatingHotend(target_extruder)) #define TEMP_CONDITIONS (wants_to_cool ? thermalManager.isCoolingHotend(target_extruder) : thermalManager.isHeatingHotend(target_extruder))
#endif //TEMP_RESIDENCY_TIME > 0 #endif //TEMP_RESIDENCY_TIME > 0
float theTarget = -1; float theTarget = -1.0, old_temp = 9999.0;
bool wants_to_cool; bool wants_to_cool;
cancel_heatup = false; cancel_heatup = false;
millis_t now, next_temp_ms = 0; millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
KEEPALIVE_STATE(NOT_BUSY); KEEPALIVE_STATE(NOT_BUSY);
@ -4581,10 +4581,6 @@ inline void gcode_M109() {
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher> // Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break; if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M109 R0
// Try to calculate a ballpark safe margin by halving EXTRUDE_MINTEMP
if (wants_to_cool && theTarget < (EXTRUDE_MINTEMP)/2) break;
} }
now = millis(); now = millis();
@ -4608,9 +4604,11 @@ inline void gcode_M109() {
idle(); idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
float temp = thermalManager.degHotend(target_extruder);
#if TEMP_RESIDENCY_TIME > 0 #if TEMP_RESIDENCY_TIME > 0
float temp_diff = fabs(theTarget - thermalManager.degHotend(target_extruder)); float temp_diff = fabs(theTarget - temp);
if (!residency_start_ms) { if (!residency_start_ms) {
// Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time. // Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
@ -4623,6 +4621,17 @@ inline void gcode_M109() {
#endif //TEMP_RESIDENCY_TIME > 0 #endif //TEMP_RESIDENCY_TIME > 0
// Prevent a wait-forever situation if R is misused i.e. M109 R0
if (wants_to_cool) {
if (temp < (EXTRUDE_MINTEMP) / 2) break; // always break at (default) 85°
// break after 20 seconds if cooling stalls
if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
if (old_temp - temp < 1.0) break;
next_cool_check_ms = now + 20000;
old_temp = temp;
}
}
} while (!cancel_heatup && TEMP_CONDITIONS); } while (!cancel_heatup && TEMP_CONDITIONS);
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
@ -4651,10 +4660,10 @@ inline void gcode_M109() {
#define TEMP_BED_CONDITIONS (wants_to_cool ? thermalManager.isCoolingBed() : thermalManager.isHeatingBed()) #define TEMP_BED_CONDITIONS (wants_to_cool ? thermalManager.isCoolingBed() : thermalManager.isHeatingBed())
#endif //TEMP_BED_RESIDENCY_TIME > 0 #endif //TEMP_BED_RESIDENCY_TIME > 0
float theTarget = -1; float theTarget = -1.0, old_temp = 9999.0;
bool wants_to_cool; bool wants_to_cool;
cancel_heatup = false; cancel_heatup = false;
millis_t now, next_temp_ms = 0; millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
KEEPALIVE_STATE(NOT_BUSY); KEEPALIVE_STATE(NOT_BUSY);
@ -4666,10 +4675,6 @@ inline void gcode_M109() {
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher> // Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break; if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M190 R0
// Simply don't wait to cool a bed under 30C
if (wants_to_cool && theTarget < 30) break;
} }
now = millis(); now = millis();
@ -4693,9 +4698,11 @@ inline void gcode_M109() {
idle(); idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
float temp = thermalManager.degBed();
#if TEMP_BED_RESIDENCY_TIME > 0 #if TEMP_BED_RESIDENCY_TIME > 0
float temp_diff = fabs(theTarget - thermalManager.degBed()); float temp_diff = fabs(theTarget - temp);
if (!residency_start_ms) { if (!residency_start_ms) {
// Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time. // Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time.
@ -4708,7 +4715,19 @@ inline void gcode_M109() {
#endif //TEMP_BED_RESIDENCY_TIME > 0 #endif //TEMP_BED_RESIDENCY_TIME > 0
// Prevent a wait-forever situation if R is misused i.e. M190 R0
if (wants_to_cool) {
if (temp < 30.0) break; // always break at 30°
// break after 20 seconds if cooling stalls
if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
if (old_temp - temp < 1.0) break;
next_cool_check_ms = now + 20000;
old_temp = temp;
}
}
} while (!cancel_heatup && TEMP_BED_CONDITIONS); } while (!cancel_heatup && TEMP_BED_CONDITIONS);
LCD_MESSAGEPGM(MSG_BED_DONE); LCD_MESSAGEPGM(MSG_BED_DONE);
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
} }