Adjust spacing
This commit is contained in:
parent
f77f3ffa70
commit
740fb2ce39
@ -656,7 +656,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -654,7 +654,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -666,7 +666,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -691,7 +691,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -674,7 +674,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -668,7 +668,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -682,7 +682,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -695,7 +695,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -666,7 +666,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -674,7 +674,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -677,7 +677,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
@ -664,7 +664,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||||
// Useful to retract a deployable Z probe.
|
// Useful to retract a deployable Z probe.
|
||||||
|
|
||||||
|
|
||||||
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
// If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
|
||||||
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
// it is highly recommended you also enable Z_SAFE_HOMING below!
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user