🩹 Inverted probe pin flag (K8400) (#25085)

This commit is contained in:
ellensp 2022-12-13 12:01:45 +13:00 committed by Scott Lahteine
parent ffbf6acd6c
commit 7815b20051
3 changed files with 44 additions and 18 deletions

View File

@ -1069,20 +1069,6 @@
#ifndef Z_PROBE_SERVO_NR
#define Z_PROBE_SERVO_NR 0
#endif
#ifdef DEACTIVATE_SERVOS_AFTER_MOVE
#error "BLTOUCH requires DEACTIVATE_SERVOS_AFTER_MOVE to be to disabled. Please update your Configuration.h file."
#endif
// Always disable probe pin inverting for BLTouch
#if Z_MIN_PROBE_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_PROBE_ENDSTOP_INVERTING set to false. Please update your Configuration.h file."
#endif
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#if Z_MIN_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_ENDSTOP_INVERTING set to false. Please update your Configuration.h file."
#endif
#endif
#endif
/**

View File

@ -1777,8 +1777,30 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#if BLTOUCH_DELAY < 200
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
#endif
#ifdef DEACTIVATE_SERVOS_AFTER_MOVE
#error "BLTOUCH requires DEACTIVATE_SERVOS_AFTER_MOVE to be to disabled. Please update your Configuration.h file."
#endif
#if HAS_INVERTED_PROBE
#if !Z_MIN_PROBE_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_PROBE_ENDSTOP_INVERTING set to true."
#endif
#elif Z_MIN_PROBE_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_PROBE_ENDSTOP_INVERTING set to false."
#endif
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#if HAS_INVERTED_PROBE
#if !Z_MIN_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_ENDSTOP_INVERTING set to true."
#endif
#elif Z_MIN_ENDSTOP_INVERTING
#error "BLTOUCH requires Z_MIN_ENDSTOP_INVERTING set to false."
#endif
#endif
#endif // BLTOUCH
#if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
#endif
@ -1795,14 +1817,28 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TOUCH_MI_PROBE requires Z_AFTER_PROBING to be disabled."
#elif Z_HOMING_HEIGHT < 10
#error "TOUCH_MI_PROBE requires Z_HOMING_HEIGHT >= 10."
#elif Z_MIN_PROBE_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING to be set to false."
#elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
#error "TOUCH_MI_PROBE requires BABYSTEPPING with BABYSTEP_ZPROBE_OFFSET."
#elif !HAS_RESUME_CONTINUE
#error "TOUCH_MI_PROBE currently requires an LCD controller or EMERGENCY_PARSER."
#endif
#if HAS_INVERTED_PROBE
#if !Z_MIN_PROBE_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING set to true."
#endif
#elif Z_MIN_PROBE_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING set to false."
#endif
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#if HAS_INVERTED_PROBE
#if !Z_MIN_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_ENDSTOP_INVERTING set to true."
#endif
#elif Z_MIN_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_ENDSTOP_INVERTING set to false."
#endif
#endif
#endif // TOUCH_MI_PROBE
/**
* Mag mounted probe requirements

View File

@ -50,6 +50,10 @@
#define X_STOP_PIN 3
#define Y_STOP_PIN 14
#if EITHER(BLTOUCH, TOUCH_MI_PROBE)
#define HAS_INVERTED_PROBE
#endif
#include "pins_3DRAG.h" // ... RAMPS
//