Enhance Teensy/RAMPS pins files

This commit is contained in:
Scott Lahteine 2017-10-14 18:44:03 -05:00
parent d3e5a22a5d
commit 799360c576
2 changed files with 32 additions and 16 deletions

View File

@ -45,7 +45,7 @@
*/
#if ENABLED(IS_REARM)
#error "Oops! use 'pins_RAMPS_RE_ARM.h' when Re-Arm is used."
#error "Oops! Use 'BOARD_RAMPS_RE_ARM' to build for Re-ARM."
#endif
#if !ENABLED(IS_RAMPS_SMART) && !ENABLED(IS_RAMPS_DUO) && !ENABLED(IS_RAMPS4DUE) && !ENABLED(TARGET_LPC1768)

View File

@ -1,15 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/****************************************************************************************
* Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
*
****************************************************************************************/
#if MOTHERBOARD == 841 // BOARD_TEENSY35_36
#define KNOWN_BOARD 1
#define AT90USB 1286 // Disable MarlinSerial etc.
#if !IS_32BIT_TEENSY
#error Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu.
#error "Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu."
#endif
#if IS_TEENSY35
@ -18,12 +36,13 @@
#define BOARD_NAME "Teensy3.6"
#endif
#define LARGE_FLASH true
#define AT90USB 1286 // Disable MarlinSerial etc.
#define USBCON //1286 // Disable MarlinSerial etc.
#define LARGE_FLASH true
/*
teemuatlut plan for Teensy3.5 and Teensy3.6:
teemuatlut plan for Teensy3.5 and Teensy3.6:
USB
GND |-----#####-----| VIN 5V
X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND
@ -84,7 +103,6 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#define HEATER_0_PIN 30
#define HEATER_1_PIN 36
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 31
#define FAN_PIN 2
@ -93,27 +111,27 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#define Z_STOP_PIN 28
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
#define TEMP_BED_PIN 1 // Bed / Analog pin numbering
#define TEMP_1_PIN 0
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // Bed / Analog pin numbering
#define SDPOWER -1
#define SD_DETECT_PIN -1
#define SDSS 39 // 8
#define LED_PIN 13
#define PS_ON_PIN 1
#define KILL_PIN -1
#define ALARM_PIN -1
#define FILWIDTH_PIN 6
#define SOL1_PIN 28
#if 0
// Pretty sure this is obsolete!
// Please use Marlin 1.1.x pins files as reference for new pins files.
#ifndef SDSUPPORT
// these are defined in the SD library if building with SD support
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#endif
#endif
#ifdef ULTRA_LCD
#define LCD_PINS_RS 40
@ -126,5 +144,3 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#define BTN_EN2 47
#define BTN_ENC 48
#endif
#endif // MOTHERBOARD == 841 (Teensy3.5 and Teensy3.6)