Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1

Conflicts:
	Marlin/Configuration.h
	README.md
This commit is contained in:
Erik van der Zalm 2013-06-09 23:10:41 +02:00
commit 7ad12be763
2 changed files with 11 additions and 13 deletions

View File

@ -527,11 +527,8 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//#define BARICUDA //#define BARICUDA
/*********************************************************************\ /*********************************************************************\
*
* R/C SERVO support * R/C SERVO support
*
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas
*
**********************************************************************/ **********************************************************************/
// Number of servos // Number of servos
@ -541,7 +538,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// leaving it undefined or defining as 0 will disable the servo subsystem // leaving it undefined or defining as 0 will disable the servo subsystem
// If unsure, leave commented / disabled // If unsure, leave commented / disabled
// //
//#define NUM_SERVOS 3 // Servo index starts with 0 //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
// Servo Endstops // Servo Endstops
// //

View File

@ -43,6 +43,7 @@ Features:
* CoreXY kinematics (www.corexy.com/theory.html) * CoreXY kinematics (www.corexy.com/theory.html)
* Configurable serial port to support connection of wireless adaptors. * Configurable serial port to support connection of wireless adaptors.
* Automatic operation of extruder/cold-end cooling fans based on nozzle temperature * Automatic operation of extruder/cold-end cooling fans based on nozzle temperature
* RC Servo Support, specify angle or duration for continuous rotation servos.
The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.
@ -198,7 +199,7 @@ Custom M Codes
* M220 S<factor in percent>- set speed factor override percentage * M220 S<factor in percent>- set speed factor override percentage
* M221 S<factor in percent>- set extrude factor override percentage * M221 S<factor in percent>- set extrude factor override percentage
* M240 - Trigger a camera to take a photograph * M240 - Trigger a camera to take a photograph
* M280 - set servo position absolute. P: servo index, S: angle or microseconds * M280 - Position an RC Servo P<index> S<angle/microseconds>, ommit S to report back current angle
* M300 - Play beepsound S<frequency Hz> P<duration ms> * M300 - Play beepsound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D * M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes * M302 - Allow cold extrudes