MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Fix up configuration comments

Browse Source
This commit is contained in:
Scott Lahteine 2017-04-08 02:49:40 -05:00
parent 995ed90248
commit 824f3c1c0d
23 changed files with 115 additions and 115 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/Configuration.h
View File

@ -596,7 +596,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -623,16 +623,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/Cartesio/Configuration.h
View File

@ -595,7 +595,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -622,16 +622,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/Felix/Configuration.h
View File

@ -579,7 +579,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -606,16 +606,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -579,7 +579,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -606,16 +606,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -587,7 +587,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -614,16 +614,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -590,7 +590,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -617,16 +617,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/K8200/Configuration.h
View File

@ -625,7 +625,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -652,16 +652,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/K8400/Configuration.h
View File

@ -596,7 +596,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -623,16 +623,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View File

@ -596,7 +596,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -623,16 +623,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -596,7 +596,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -623,16 +623,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -595,7 +595,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -622,16 +622,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -611,7 +611,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -638,16 +638,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -616,7 +616,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -643,16 +643,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/TinyBoy2/Configuration.h
View File

@ -647,7 +647,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -674,16 +674,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -587,7 +587,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -614,16 +614,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -596,7 +596,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -623,16 +623,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
View File

@ -654,7 +654,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -681,16 +681,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.25 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 2000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -641,7 +641,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -668,16 +668,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 4000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH

10
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -634,7 +634,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -661,16 +661,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 4000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -635,7 +635,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -665,16 +665,16 @@
* not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
*/
#define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero).
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -654,7 +654,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -681,16 +681,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!)
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/makibox/Configuration.h
View File

@ -599,7 +599,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -626,16 +626,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**

10
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -592,7 +592,7 @@
* is enabled then it also applies to Z_PROBE_SPEED_SLOW.
*/
/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
@ -619,16 +619,16 @@
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
/* X and Y axis travel speed (mm/m) between probes */
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
/* Speed for the "accurate" probe of each point */
// Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/* Use double touch for probing */
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
/**