MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🐛 Fix missing u8g_esp32_spi (#23562)

Browse Source
This commit is contained in:
ellensp 2022-02-06 05:52:18 +13:00 committed by Scott Lahteine
parent 8799837d75
commit 82ae3646cb
2 changed files with 104 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

99
Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp Normal file
View File

@ -0,0 +1,99 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* Copypaste of SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(FYSETC_MINI_12864_2_1)
#include <U8glib-HAL.h>
#include "Arduino.h"
#include "../shared/HAL_SPI.h"
#include "SPI.h"
static SPISettings spiConfig;
#define MDOGLCD_MOSI 23
#define MDOGLCD_SCK 18
#define MLCD_RESET_PIN 0
#define MLCD_PINS_DC 4
#define MDOGLCD_CS 21
#define MDOGLCD_A0 4
#ifndef LCD_SPI_SPEED
#ifdef SD_SPI_SPEED
#define LCD_SPI_SPEED SD_SPI_SPEED // Assume SPI speed shared with SD
#else
#define LCD_SPI_SPEED SPI_FULL_SPEED // Use full speed if SD speed is not supplied
#endif
#endif
uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
if (msgInitCount) {
if (msg == U8G_COM_MSG_INIT) msgInitCount--;
if (msgInitCount) return -1;
}
switch (msg) {
case U8G_COM_MSG_STOP: break;
case U8G_COM_MSG_INIT:
OUT_WRITE(MDOGLCD_CS, HIGH);
OUT_WRITE(MDOGLCD_A0, HIGH);
OUT_WRITE(MLCD_RESET_PIN, HIGH);
u8g_Delay(5);
spiBegin();
spiInit(LCD_SPI_SPEED);
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
WRITE(MDOGLCD_A0, arg_val ? HIGH : LOW);
break;
case U8G_COM_MSG_CHIP_SELECT: /* arg_val == 0 means HIGH level of U8G_PI_CS */
WRITE(MDOGLCD_CS, arg_val ? LOW : HIGH);
break;
case U8G_COM_MSG_RESET:
WRITE(MLCD_RESET_PIN, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
spiSend((uint8_t)arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ:
uint8_t *ptr = (uint8_t*) arg_ptr;
while (arg_val > 0) {
spiSend(*ptr++);
arg_val--;
}
break;
}
return 1;
}
#endif // FYSETC_MINI_12864_2_1
#endif // ARDUINO_ARCH_ESP32

5
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View File

@ -57,6 +57,11 @@
#define U8G_COM_HAL_SW_SPI_FN u8g_com_std_sw_spi_fn
#define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
#elif defined(ESP32)
uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_eps_hw_spi_fn
#elif defined(__AVR__)
uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);