MPX_ARM_MINI board (Mingda MD-16) (#20711)

This commit is contained in:
rafaljot 2021-01-29 06:22:18 +01:00 committed by Scott Lahteine
parent 4b9f2f13b1
commit 845b99feb7
4 changed files with 196 additions and 0 deletions

View File

@ -338,6 +338,7 @@
#define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6)
#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6)
#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller
#define BOARD_MINGDA_MPX_ARM_MINI 4048 // STM32F103ZET6 Mingda MD-16
//
// ARM Cortex-M4F

View File

@ -548,6 +548,8 @@
#include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeed
#elif MB(BEAST)
#include "stm32f1/pins_BEAST.h" // STM32F1 env:STM32F103RE
#elif MB(MINGDA_MPX_ARM_MINI)
#include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:STM32F103RE
//
// ARM Cortex-M4F

View File

@ -0,0 +1,176 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MKS Robin mini (STM32F130VET6) board pin assignments
*/
#if NOT_TARGET(STM32F1, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "Mingda MPX_ARM_MINI"
#define BOARD_NO_NATIVE_USB
#define DISABLE_DEBUG
//
// EEPROM
//
/*
//Mingda used an unknown EEPROM chip ATMLH753, so I turned on the emulation below.
//It is connected to EEPROM PB6 PB7
#define I2C_EEPROM
#undef NO_EEPROM_SELECTED
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define USE_SHARED_EEPROM 1 // Use Platform-independent Arduino functions for I2C EEPROM
#define E2END 0xFFFF // EEPROM end address AT24C256 (32kB)
*/
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE 0x800U // 2KB
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif
#define SPI_DEVICE 2
//
// Limit Switches
//
#define X_MIN_PIN PD6
#define X_MAX_PIN PG15
#define Y_MIN_PIN PG9
#define Y_MAX_PIN PG14
#define Z_MIN_PIN PG10
#define Z_MAX_PIN PG13
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PG11
#endif
//
// Steppers
//
#define X_ENABLE_PIN PD13
#define X_STEP_PIN PD12
#define X_DIR_PIN PD11
#define Y_ENABLE_PIN PG4
#define Y_STEP_PIN PG3
#define Y_DIR_PIN PG2
#define Z_ENABLE_PIN PG7
#define Z_STEP_PIN PG6
#define Z_DIR_PIN PG5
#define E0_ENABLE_PIN PC7
#define E0_STEP_PIN PC6
#define E0_DIR_PIN PG8
//
// Temperature Sensors
//
//#define TEMP_0_PIN PF6 // THERM_E0
//#define TEMP_0_PIN PB3 // E0 K+
#define TEMP_BED_PIN PF7 // THERM_BED
#define MAX6675_SS_PIN PB5
#define MAX6675_SCK_PIN PB3
#define MAX6675_DO_PIN PB4
#define MAX6675_MOSI_PIN PA14
//
// Heaters / Fans
//
#define HEATER_0_PIN PB0
#define HEATER_BED_PIN PB1
#define FAN_PIN PA0 // FAN
//
// SD Card
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#define SDIO_SUPPORT
#define SDIO_CLOCK 4500000 // 4.5 MHz
#define SDIO_READ_RETRIES 16
#define SD_DETECT_PIN PC5
#define ONBOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PC10
//
// LCD / Controller
//
#define BEEPER_PIN PE4
/**
* Note: MKS Robin TFT screens use various TFT controllers.
* If the screen stays white, disable 'LCD_RESET_PIN'
* to let the bootloader init the screen.
*/
#if HAS_FSMC_TFT
/**
* Note: MKS Robin TFT screens use various TFT controllers
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
* ILI9488 is not supported
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
*
* If the screen stays white, disable 'TFT_RESET_PIN'
* to let the bootloader init the screen.
*
* Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/
#define TFT_CS_PIN PD7 // NE4
#define TFT_RS_PIN PG0 // A0
#define FSMC_CS_PIN TFT_CS_PIN
#define FSMC_RS_PIN TFT_RS_PIN
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TFT_RESET_PIN PF15
#define TFT_BACKLIGHT_PIN PF11
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#endif
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PA4 // SPI2_NSS
#define TOUCH_SCK_PIN PA5 // SPI2_SCK
#define TOUCH_MISO_PIN PA6 // SPI2_MISO
#define TOUCH_MOSI_PIN PA7 // SPI2_MOSI
#endif

View File

@ -1524,6 +1524,23 @@ build_flags = ${stm32_flash_drive.build_flags}
-DUSE_USB_HS_IN_FS
-DUSBD_USE_CDC
#
# Mingda MPX_ARM_MINI
#
[env:mingda_mpx_arm_mini]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103ZE
board_build.core = stm32
board_build.variant = MARLIN_F103Zx
board_build.ldscript = ldscript.ld
board_build.offset = 0x10000
build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common.extra_scripts} pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#################################
# #
# Other Architectures #