MPCNC
/
Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Password via G-code and MarlinUI (#18399) 

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
sherwin-dc 2020-08-09 09:00:42 +08:00 committed by GitHub
parent 0a1b865987
commit 852e5ae042
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
19 changed files with 588 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/Configuration.h
View File

@ -1642,6 +1642,37 @@
*/
//#define PRINTCOUNTER
/**
* Password
*
* Set a numerical password for the printer which can be requested:
*
* - When the printer boots up
* - Upon opening the 'Print from Media' Menu
* - When SD printing is completed or aborted
*
* The following G-codes can be used:
*
* M510 - Lock Printer. Blocks all commands except M511.
* M511 - Unlock Printer.
* M512 - Set, Change and Remove Password.
*
* If you forget the password and get locked out you'll need to re-flash
* the firmware with the feature disabled, reset EEPROM, and (optionally)
* re-flash the firmware again with this feature enabled.
*/
//#define PASSWORD_FEATURE
#if ENABLED(PASSWORD_FEATURE)
#define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
#define PASSWORD_ON_STARTUP
#define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
#define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> N<new>.
//#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent gcodes from running
//#define PASSWORD_AFTER_SD_PRINT_END
//#define PASSWORD_AFTER_SD_PRINT_ABORT
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================

14
Marlin/src/MarlinCore.cpp
View File

@ -213,6 +213,10 @@
#include "libs/L64XX/L64XX_Marlin.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "feature/password/password.h"
#endif
PGMSTR(NUL_STR, "");
PGMSTR(M112_KILL_STR, "M112 Shutdown");
PGMSTR(G28_STR, "G28");
@ -452,11 +456,15 @@ void startOrResumeJob() {
#ifdef EVENT_GCODE_SD_STOP
queue.inject_P(PSTR(EVENT_GCODE_SD_STOP));
#endif
TERN_(PASSWORD_AFTER_SD_PRINT_ABORT, password.lock_machine());
}
inline void finishSDPrinting() {
if (queue.enqueue_one_P(PSTR("M1001")))
if (queue.enqueue_one_P(PSTR("M1001"))) {
marlin_state = MF_RUNNING;
TERN_(PASSWORD_AFTER_SD_PRINT_END, password.lock_machine());
}
}
#endif // SDSUPPORT
@ -1205,6 +1213,10 @@ void setup() {
SETUP_RUN(tft_lvgl_init());
#endif
#if ENABLED(PASSWORD_ON_STARTUP)
SETUP_RUN(password.lock_machine()); // Will not proceed until correct password provided
#endif
marlin_state = MF_RUNNING;
SETUP_LOG("setup() completed.");

7
Marlin/src/core/language.h
View File

@ -266,6 +266,13 @@
#define STR_DEBUG_COMMUNICATION "COMMUNICATION"
#define STR_DEBUG_LEVELING "LEVELING"
#define STR_PRINTER_LOCKED "Printer locked! (Unlock with M511 or LCD)"
#define STR_WRONG_PASSWORD "Incorrect Password"
#define STR_PASSWORD_TOO_LONG "Password too long"
#define STR_PASSWORD_REMOVED "Password removed"
#define STR_REMINDER_SAVE_SETTINGS "Remember to save!"
#define STR_PASSWORD_SET "Password is "
// LCD Menu Messages
#define LANGUAGE_DATA_INCL_(M) STRINGIFY_(fontdata/langdata_##M.h)

51
Marlin/src/core/macros.h
View File

@ -342,15 +342,22 @@
#endif
// Macros for adding
#define INC_0 1
#define INC_1 2
#define INC_2 3
#define INC_3 4
#define INC_4 5
#define INC_5 6
#define INC_6 7
#define INC_7 8
#define INC_8 9
#define INC_0 1
#define INC_1 2
#define INC_2 3
#define INC_3 4
#define INC_4 5
#define INC_5 6
#define INC_6 7
#define INC_7 8
#define INC_8 9
#define INC_9 10
#define INC_10 11
#define INC_11 12
#define INC_12 13
#define INC_13 14
#define INC_14 15
#define INC_15 16
#define INCREMENT_(n) INC_##n
#define INCREMENT(n) INCREMENT_(n)
@ -367,16 +374,22 @@
#define ADD10(N) ADD5(ADD5(N))
// Macros for subtracting
#define DEC_0 0
#define DEC_1 0
#define DEC_2 1
#define DEC_3 2
#define DEC_4 3
#define DEC_5 4
#define DEC_6 5
#define DEC_7 6
#define DEC_8 7
#define DEC_9 8
#define DEC_0 0
#define DEC_1 0
#define DEC_2 1
#define DEC_3 2
#define DEC_4 3
#define DEC_5 4
#define DEC_6 5
#define DEC_7 6
#define DEC_8 7
#define DEC_9 8
#define DEC_10 9
#define DEC_11 10
#define DEC_12 11
#define DEC_13 12
#define DEC_14 13
#define DEC_15 14
#define DECREMENT_(n) DEC_##n
#define DECREMENT(n) DECREMENT_(n)

58
Marlin/src/feature/password/password.cpp Normal file
View File

@ -0,0 +1,58 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(PASSWORD_FEATURE)
#include "password.h"
#include "../../gcode/gcode.h"
#include "../../core/serial.h"
Password password;
// public:
bool Password::is_set, Password::is_locked;
uint32_t Password::value, Password::value_entry;
//
// Authenticate user with password.
// Called from Setup, after SD Prinitng Stops/Aborts, and M510
//
void Password::lock_machine() {
is_locked = true;
TERN_(HAS_LCD_MENU, authenticate_user(ui.status_screen, screen_password_entry));
}
//
// Authentication check
//
void Password::authentication_check() {
if (value_entry == value)
is_locked = false;
else
SERIAL_ECHOLNPGM(STR_WRONG_PASSWORD);
TERN_(HAS_LCD_MENU, authentication_done());
}
#endif // PASSWORD_FEATURE

57
Marlin/src/feature/password/password.h Normal file
View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../lcd/ultralcd.h"
class Password {
public:
static bool is_set, is_locked;
static uint32_t value, value_entry;
Password() { is_locked = false; }
static void lock_machine();
#if HAS_LCD_MENU
static void access_menu_password();
static void authentication_check();
static void authentication_done();
static void media_gatekeeper();
private:
static void authenticate_user(const screenFunc_t, const screenFunc_t);
static void menu_password();
static void menu_password_entry();
static void screen_password_entry();
static void screen_set_password();
static void start_over();
static void digit_entered();
static void set_password_done();
static void menu_password_report();
static void remove_password();
#endif
};
extern Password password;

83
Marlin/src/gcode/feature/password/M510-M512.cpp Normal file
View File

@ -0,0 +1,83 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(PASSWORD_FEATURE)
#include "../../../feature/password/password.h"
#include "../../../core/serial.h"
#include "../../gcode.h"
//
// M510: Lock Printer
//
void GcodeSuite::M510() {
password.lock_machine();
}
//
// M511: Unlock Printer
//
#if ENABLED(PASSWORD_UNLOCK_GCODE)
void GcodeSuite::M511() {
if (password.is_locked) {
password.value_entry = parser.ulongval('P');
password.authentication_check();
}
}
#endif // PASSWORD_UNLOCK_GCODE
//
// M512: Set/Change/Remove Password
//
#if ENABLED(PASSWORD_CHANGE_GCODE)
void GcodeSuite::M512() {
if (password.is_set && parser.ulongval('P') != password.value) {
SERIAL_ECHOLNPGM(STR_WRONG_PASSWORD);
return;
}
if (parser.seenval('N')) {
password.value_entry = parser.ulongval('N');
if (password.value_entry < CAT(1e, PASSWORD_LENGTH)) {
password.is_set = true;
password.value = password.value_entry;
SERIAL_ECHOLNPAIR(STR_PASSWORD_SET, password.value); // TODO: Update password.string
}
else
SERIAL_ECHOLNPGM(STR_PASSWORD_TOO_LONG);
}
else {
password.is_set = false;
SERIAL_ECHOLNPGM(STR_PASSWORD_REMOVED);
}
SERIAL_ECHOLNPGM(STR_REMINDER_SAVE_SETTINGS);
}
#endif // PASSWORD_CHANGE_GCODE
#endif // PASSWORD_FEATURE

25
Marlin/src/gcode/gcode.cpp
View File

@ -57,6 +57,10 @@ GcodeSuite gcode;
#include "../feature/spindle_laser.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../feature/password/password.h"
#endif
#include "../MarlinCore.h" // for idle()
// Inactivity shutdown
@ -241,6 +245,17 @@ void GcodeSuite::dwell(millis_t time) {
void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
KEEPALIVE_STATE(IN_HANDLER);
/**
* Block all Gcodes except M511 Unlock Printer, if printer is locked
* Will still block Gcodes if M511 is disabled, in which case the printer should be unlocked via LCD Menu
*/
#if ENABLED(PASSWORD_FEATURE)
if (password.is_locked && !(parser.command_letter == 'M' && parser.codenum == 511)) {
SERIAL_ECHO_MSG(STR_PRINTER_LOCKED);
return;
}
#endif
// Handle a known G, M, or T
switch (parser.command_letter) {
case 'G': switch (parser.codenum) {
@ -736,6 +751,16 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 504: M504(); break; // M504: Validate EEPROM contents
#endif
#if ENABLED(PASSWORD_FEATURE)
case 510: M510(); break; // M510: Lock Printer
#if ENABLED(PASSWORD_UNLOCK_GCODE)
case 511: M511(); break; // M511: Unlock Printer
#endif
#if ENABLED(PASSWORD_CHANGE_GCODE)
case 512: M512(); break;
#endif // M512: Set/Change/Remove Password
#endif
#if ENABLED(SDSUPPORT)
case 524: M524(); break; // M524: Abort the current SD print job
#endif

13
Marlin/src/gcode/gcode.h
View File

@ -225,6 +225,9 @@
* M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
* M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
* M504 - Validate EEPROM contents. (Requires EEPROM_SETTINGS)
* M510 - Lock Printer
* M511 - Unlock Printer
* M512 - Set/Change/Remove Password
* M524 - Abort the current SD print job started with M24. (Requires SDSUPPORT)
* M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires SD_ABORT_ON_ENDSTOP_HIT)
* M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130/2160/2208/2209/5130/5160)
@ -760,6 +763,16 @@ private:
#endif
TERN_(EEPROM_SETTINGS, static void M504());
#if ENABLED(PASSWORD_FEATURE)
static void M510();
#if ENABLED(PASSWORD_UNLOCK_GCODE)
static void M511();
#endif
#if ENABLED(PASSWORD_CHANGE_GCODE)
static void M512();
#endif
#endif
TERN_(SDSUPPORT, static void M524());
TERN_(SD_ABORT_ON_ENDSTOP_HIT, static void M540());

11
Marlin/src/inc/SanityCheck.h
View File

@ -3083,5 +3083,16 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 controller."
#endif
/**
* Sanity Check for Password Feature
*/
#if ENABLED(PASSWORD_FEATURE)
#if NONE(HAS_LCD_MENU, PASSWORD_UNLOCK_GCODE, PASSWORD_CHANGE_GCODE)
#error "Without PASSWORD_UNLOCK_GCODE, PASSWORD_CHANGE_GCODE, or a supported LCD there's no way to unlock the printer or set a password."
#elif DISABLED(EEPROM_SETTINGS)
#warning "PASSWORD_FEATURE settings will be lost on power-off without EEPROM_SETTINGS."
#endif
#endif
// Misc. Cleanup
#undef _TEST_PWM

11
Marlin/src/lcd/language/language_en.h
View File

@ -588,6 +588,17 @@ namespace Language_en {
PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("Bad page index");
PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("Bad page speed");
PROGMEM Language_Str MSG_EDIT_PASSWORD = _UxGT("Edit Password");
PROGMEM Language_Str MSG_LOGIN_REQUIRED = _UxGT("Login Required");
PROGMEM Language_Str MSG_PASSWORD_SETTINGS = _UxGT("Password Settings");
PROGMEM Language_Str MSG_ENTER_DIGIT = _UxGT("Enter Digit");
PROGMEM Language_Str MSG_CHANGE_PASSWORD = _UxGT("Set/Edit Password");
PROGMEM Language_Str MSG_REMOVE_PASSWORD = _UxGT("Remove Password");
PROGMEM Language_Str MSG_PASSWORD_SET = _UxGT("Password is ");
PROGMEM Language_Str MSG_START_OVER = _UxGT("Start Over");
PROGMEM Language_Str MSG_REMINDER_SAVE_SETTINGS = _UxGT("Remember to Save!");
PROGMEM Language_Str MSG_PASSWORD_REMOVED = _UxGT("Password Removed");
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display

8
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -51,6 +51,10 @@
#include "../../module/settings.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#endif
void menu_tmc();
void menu_backlash();
@ -603,6 +607,10 @@ void menu_advanced_settings() {
});
#endif
#if ENABLED(PASSWORD_FEATURE)
SUBMENU(MSG_PASSWORD_SETTINGS, password.access_menu_password);
#endif
#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
CONFIRM_ITEM(MSG_INIT_EEPROM,
MSG_BUTTON_INIT, MSG_BUTTON_CANCEL,

8
Marlin/src/lcd/menu/menu_main.cpp
View File

@ -50,6 +50,10 @@
#include "../../lcd/menu/menu_mmu2.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#endif
void menu_tune();
void menu_cancelobject();
void menu_motion();
@ -133,7 +137,7 @@ void menu_main() {
if (card_detected) {
if (!card_open) {
SUBMENU(MSG_MEDIA_MENU, menu_media);
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
MENU_ITEM(gcode,
#if PIN_EXISTS(SD_DETECT)
MSG_CHANGE_MEDIA, M21_STR
@ -240,7 +244,7 @@ void menu_main() {
MSG_RELEASE_MEDIA, PSTR("M22")
#endif
);
SUBMENU(MSG_MEDIA_MENU, menu_media);
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
}
}
else {

184
Marlin/src/lcd/menu/menu_password.cpp Normal file
View File

@ -0,0 +1,184 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
//
// Advanced Settings Menus
//
#include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_LCD_MENU, PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#include "menu.h"
#include "menu_addon.h"
void menu_advanced_settings();
screenFunc_t success_screen, fail_screen;
bool authenticating; // = false
char string[(PASSWORD_LENGTH) + 1];
static uint8_t digit_no;
//
// Screen for both editing and setting the password
//
void Password::menu_password_entry() {
START_MENU();
// "Login" or "New Code"
STATIC_ITEM_P(authenticating ? GET_TEXT(MSG_LOGIN_REQUIRED) : GET_TEXT(MSG_EDIT_PASSWORD), SS_CENTER|SS_INVERT);
STATIC_ITEM_P(PSTR(""), SS_CENTER|SS_INVERT, string);
// Make the digit edit item look like a sub-menu
PGM_P const label = GET_TEXT(MSG_ENTER_DIGIT);
EDIT_ITEM_P(uint8, label, &editable.uint8, 0, 9, digit_entered);
MENU_ITEM_ADDON_START(utf8_strlen_P(label) + 1);
lcd_put_wchar(' ');
lcd_put_wchar('1' + digit_no);
SETCURSOR_X(LCD_WIDTH - 1);
lcd_put_wchar('>');
MENU_ITEM_ADDON_END();
ACTION_ITEM(MSG_START_OVER, start_over);
if (!authenticating) BACK_ITEM(MSG_BUTTON_CANCEL);
END_MENU();
}
//
// Authentication check
//
void Password::authentication_done() {
ui.goto_screen(is_locked ? fail_screen : success_screen);
ui.completion_feedback(!is_locked);
}
// A single digit was completed
void Password::digit_entered() {
uint32_t multiplier = CAT(1e, PASSWORD_LENGTH); // 1e5 = 100000
LOOP_LE_N(i, digit_no) multiplier /= 10;
value_entry += editable.uint8 * multiplier;
string[digit_no++] = '0' + editable.uint8;
// Exit edit screen menu and go to another screen
ui.goto_previous_screen();
ui.use_click();
ui.goto_screen(menu_password_entry);
// After password has been keyed in
if (digit_no == PASSWORD_LENGTH) {
if (authenticating)
authentication_check();
else
set_password_done();
}
}
//
// Set/Change Password
//
void Password::screen_password_entry() {
value_entry = 0;
digit_no = 0;
editable.uint8 = 0;
memset(string, '-', PASSWORD_LENGTH);
string[PASSWORD_LENGTH] = '\0';
menu_password_entry();
}
void Password::screen_set_password() {
authenticating = false;
screen_password_entry();
}
void Password::authenticate_user(const screenFunc_t in_succ_scr, const screenFunc_t in_fail_scr) {
success_screen = in_succ_scr;
fail_screen = in_fail_scr;
if (is_set) {
authenticating = true;
ui.goto_screen(screen_password_entry);
ui.defer_status_screen();
ui.update();
}
else {
ui.goto_screen(in_succ_scr);
is_locked = false;
}
}
void Password::access_menu_password() {
authenticate_user(menu_password, menu_advanced_settings);
}
#if ENABLED(PASSWORD_ON_SD_PRINT_MENU)
void Password::media_gatekeeper() {
authenticate_user(menu_media, menu_main);
}
#endif
void Password::start_over() {
ui.goto_previous_screen(); // Goto previous screen, if any
ui.goto_screen(screen_password_entry);
}
void Password::menu_password_report() {
START_SCREEN();
BACK_ITEM(MSG_PASSWORD_SETTINGS);
STATIC_ITEM(MSG_PASSWORD_SET, SS_LEFT, string);
STATIC_ITEM(MSG_REMINDER_SAVE_SETTINGS, SS_LEFT);
END_SCREEN();
}
void Password::set_password_done() {
is_set = true;
value = value_entry;
ui.completion_feedback(true);
ui.goto_screen(menu_password_report);
}
void Password::remove_password() {
is_set = false;
string[0] = '0';
string[1] = '\0';
ui.completion_feedback(true);
ui.goto_screen(menu_password_report);
}
//
// Password Menu
//
void Password::menu_password() {
START_MENU();
BACK_ITEM(MSG_ADVANCED_SETTINGS);
SUBMENU(MSG_CHANGE_PASSWORD, screen_set_password);
ACTION_ITEM(MSG_REMOVE_PASSWORD, []{ ui.save_previous_screen(); remove_password(); } );
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
#endif
END_MENU();
}
#endif // HAS_LCD_MENU && PASSWORD_FEATURE

42
Marlin/src/module/settings.cpp
View File

@ -140,6 +140,10 @@
#define HAS_CASE_LIGHT_BRIGHTNESS 1
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../feature/password/password.h"
#endif
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
#include "../lcd/tft/touch.h"
#endif
@ -152,7 +156,7 @@ typedef struct { int16_t X, Y, Z, X2, Y2, Z2, Z3, Z4;
typedef struct { bool X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7; } tmc_stealth_enabled_t;
// Limit an index to an array size
#define ALIM(I,ARR) _MIN(I, signed(COUNT(ARR) - 1))
#define ALIM(I,ARR) _MIN(I, (signed)COUNT(ARR) - 1)
// Defaults for reset / fill in on load
static const uint32_t _DMA[] PROGMEM = DEFAULT_MAX_ACCELERATION;
@ -407,6 +411,14 @@ typedef struct SettingsDataStruct {
uint8_t caselight_brightness; // M355 P
#endif
//
// PASSWORD_FEATURE
//
#if ENABLED(PASSWORD_FEATURE)
bool password_is_set;
uint32_t password_value;
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -1345,6 +1357,14 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
EEPROM_WRITE(password.is_set);
EEPROM_WRITE(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -2185,6 +2205,15 @@ void MarlinSettings::postprocess() {
EEPROM_READ(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
_FIELD_TEST(password_is_set);
EEPROM_READ(password.is_set);
EEPROM_READ(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -2665,7 +2694,7 @@ void MarlinSettings::reset() {
#define PID_DEFAULT(N,E) DEFAULT_##N
#endif
HOTEND_LOOP() {
PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
PID_PARAM(Ki, e) = scalePID_i(PID_DEFAULT(Ki, ALIM(e, defKi)));
PID_PARAM(Kd, e) = scalePID_d(PID_DEFAULT(Kd, ALIM(e, defKd)));
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = float(PID_DEFAULT(Kc, ALIM(e, defKc))));
@ -2783,6 +2812,15 @@ void MarlinSettings::reset() {
}
#endif
#if ENABLED(PASSWORD_FEATURE)
#ifdef PASSWORD_DEFAULT_VALUE
password.is_set = true;
password.value = PASSWORD_DEFAULT_VALUE;
#else
password.is_set = false;
#endif
#endif
postprocess();
DEBUG_ECHO_START();

3
buildroot/share/PlatformIO/scripts/common-dependencies.h
View File

@ -143,6 +143,9 @@
#if ENABLED(MMU2_MENUS)
#define HAS_MENU_MMU2
#endif
#if ENABLED(PASSWORD_FEATURE)
#define HAS_MENU_PASSWORD
#endif
#if HAS_TRINAMIC_CONFIG
#define HAS_MENU_TMC
#endif

2
buildroot/tests/DUE-tests
View File

@ -33,7 +33,7 @@ opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 6
opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), EXTENSIBLE_UI, S-Curve, many options."
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options."
restore_configs
opt_set MOTHERBOARD BOARD_RADDS

1
buildroot/tests/rambo-tests
View File

@ -33,6 +33,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \
NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \
AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DISTINCT_E_FACTORS \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \

4
platformio.ini
View File

@ -41,6 +41,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/lcd/menu/menu_led.cpp>
-<src/lcd/menu/menu_media.cpp>
-<src/lcd/menu/menu_mmu2.cpp>
-<src/lcd/menu/menu_password.cpp>
-<src/lcd/menu/menu_power_monitor.cpp>
-<src/lcd/menu/menu_spindle_laser.cpp>
-<src/lcd/menu/menu_temperature.cpp>
@ -86,6 +87,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/max7219.cpp>
-<src/feature/mixing.cpp>
-<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
-<src/feature/password> -<src/gcode/feature/password>
-<src/feature/pause.cpp>
-<src/feature/power.cpp>
-<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
@ -231,6 +233,7 @@ HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
@ -276,6 +279,7 @@ TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
PRUSA_MMU2 = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>